Newer clangs rightly spot that you can never exceed the full address
space of 64 bit hosts with:
linux-user/elfload.c:2076:41: error: result of comparison 'unsigned
long' > 18446744073709551615 is always false
[-Werror,-Wtautological-type-limit-compare]
4685 if ((guest_hiaddr - guest_base) > ~(uintptr_t)0) {
4686 ~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~
4687 1 error generated.
So lets limit the check to 32 bit hosts only.
Fixes: ee94743034
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200525131823.715-8-thuth@redhat.com>
[thuth: Use HOST_LONG_BITS < TARGET_ABI_BITS instead of HOST_LONG_BITS == 32]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Arm signal-handling code has some parts ifdeffed with a
TARGET_CONFIG_CPU_32, which is always defined. This is a leftover
from when this code's structure was based on the Linux kernel
signal handling code, where it was intended to support 26-bit
Arm CPUs. The kernel dropped its CONFIG_CPU_32 in kernel commit
4da8b8208eded0ba21e3 in 2009.
QEMU has never had 26-bit CPU support and is unlikely to ever
add it; we certainly aren't going to support 26-bit Linux
binaries via linux-user mode. The ifdef is just unhelpful
noise, so remove it entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200518143014.20689-1-peter.maydell@linaro.org
This fixes signal handlers running with the wrong endianness if the
interrupted code used SETEND to dynamically switch endianness.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200511131117.2486486-1-amanieu@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using the MSR instruction to write to CPSR.E is deprecated, but it is
required to work from any mode including unprivileged code. We were
incorrectly forbidding usermode code from writing it because
CPSR_USER did not include the CPSR_E bit.
We use CPSR_USER in only three places:
* as the mask of what to allow userspace MSR to write to CPSR
* when deciding what bits a linux-user signal-return should be
able to write from the sigcontext structure
* in target_user_copy_regs() when we set up the initial
registers for the linux-user process
In the first two cases not being able to update CPSR.E is a bug, and
in the third case it doesn't matter because CPSR.E is always 0 there.
So we can fix both bugs by adding CPSR_E to CPSR_USER.
Because the cpsr_write() in restore_sigcontext() is now changing
a CPSR bit which is cached in hflags, we need to add an
arm_rebuild_hflags() call there; the callsite in
target_user_copy_regs() was already rebuilding hflags for other
reasons.
(The recommended way to change CPSR.E is to use the 'SETEND'
instruction, which we do correctly allow from usermode code.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200518142801.20503-1-peter.maydell@linaro.org
Our code to identify syscall numbers has some issues:
* for Thumb mode, we never need the immediate value from the insn,
but we always read it anyway
* bad immediate values in the svc insn should cause a SIGILL, but we
were abort()ing instead (via "goto error")
We can fix both these things by refactoring the code that identifies
the syscall number to more closely follow the kernel COMPAT_OABI code:
* for Thumb it is always r7
* for Arm, if the immediate value is 0, then this is an EABI call
with the syscall number in r7
* otherwise, we XOR the immediate value with 0x900000
(ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel),
which converts valid syscall immediates into the desired value,
and puts all invalid immediates in the range 0x100000 or above
* then we can just let the existing "value too large, deliver
SIGILL" case handle invalid numbers, and drop the 'goto error'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200420212206.12776-5-peter.maydell@linaro.org
The kernel has different handling for syscalls with invalid
numbers that are in the "arm-specific" range 0x9f0000 and up:
* 0x9f0000..0x9f07ff return -ENOSYS if not implemented
* other out of range syscalls cause a SIGILL
(see the kernel's arch/arm/kernel/traps.c:arm_syscall())
Implement this distinction. (Note that our code doesn't look
quite like the kernel's, because we have removed the
0x900000 prefix by this point, whereas the kernel retains
it in arm_syscall().)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200420212206.12776-4-peter.maydell@linaro.org
We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a
NOP for QEMU). This is the wrong syscall number, because in the
svc-immediate OABI syscall numbers are all offset by the
ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002.
(This is handled further down in the code with the other Arm-specific
syscalls like NR_breakpoint.)
When this code was initially added in commit 6f1f31c069 in
2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2)
so the value in the comparison took account of the extra 0x900000
offset. In commit fbb4a2e371 in 2008, the ARM_SYSCALL_BASE
was removed from the definition of ARM_NR_cacheflush and handling
for this group of syscalls was added below the point where we subtract
ARM_SYSCALL_BASE from the SVC immediate value. However that commit
forgot to remove the now-obsolete earlier handling code.
Remove the spurious ARM_NR_cacheflush condition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200420212206.12776-3-peter.maydell@linaro.org
In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly
to EXCP_SWI, which means that if the guest executes a BKPT insn then
QEMU will perform a syscall for it (which syscall depends on what
value happens to be in r7...). The correct behaviour is that the
guest process should take a SIGTRAP.
This code has been like this (more or less) since commit
06c949e62a in 2006 which added BKPT in the first place. This is
probably because at the time the same code path was used to handle
both Linux syscalls and semihosting calls, and (on M profile) BKPT
with a suitable magic number is used for semihosting calls. But
these days we've moved handling of semihosting out to an entirely
different codepath, so we can fix this bug by simply removing this
handling of EXCP_BKPT and instead making it deliver a SIGTRAP like
EXCP_DEBUG (as we do already on aarch64).
Reported-by: <omerg681@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200420212206.12776-2-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1873898
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First we ensure all guest space initialisation logic comes through
probe_guest_base once we understand the nature of the binary we are
loading. The convoluted init_guest_space routine is removed and
replaced with a number of pgb_* helpers which are called depending on
what requirements we have when loading the binary.
We first try to do what is requested by the host. Failing that we try
and satisfy the guest requested base address. If all those options
fail we fall back to finding a space in the memory map using our
recently written read_self_maps() helper.
There are some additional complications we try and take into account
when looking for holes in the address space. We try not to go directly
after the system brk() space so there is space for a little growth. We
also don't want to have to use negative offsets which would result in
slightly less efficient code on x86 when it's unable to use the
segment offset register.
Less mind-binding gotos and hopefully clearer logic throughout.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200513175134.19619-5-alex.bennee@linaro.org>
While debugging over TCP is fairly straightforward now we have test
cases that want to orchestrate via make and currently a parallel build
fails as two processes can't use the same listening port. While system
emulation offers a wide cornucopia of connection methods thanks to the
chardev abstraction we are a little more limited for linux user.
Thankfully the programming API for a TCP socket and a local UNIX
socket is pretty much the same once it's set up.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-7-alex.bennee@linaro.org>
As struct target_ucontext will be transfered to signal handler, it
must keep pace with struct ucontext_t defined in Linux kernel.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200412020830.607-1-zhiwei_liu@c-sky.com
Message-Id: <20200412020830.607-1-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Here are a few late bugfixes for qemu-5.0 in the ppc target code.
Unless some really nasty last minute bug shows up, I expect this to be
the last ppc pull request for qemu-5.0.
-----BEGIN PGP SIGNATURE-----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=KdBh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200417' into staging
ppc patch queue for 2020-04-17
Here are a few late bugfixes for qemu-5.0 in the ppc target code.
Unless some really nasty last minute bug shows up, I expect this to be
the last ppc pull request for qemu-5.0.
# gpg: Signature made Fri 17 Apr 2020 06:02:13 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200417:
target/ppc: Fix mtmsr(d) L=1 variant that loses interrupts
target/ppc: Fix wrong interpretation of the disposition flag.
linux-user/ppc: Fix padding in mcontext_t for ppc64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The padding that was added in 95cda4c44e was added to a union,
and so it had no effect. This fixes misalignment errors detected
by clang sanitizers for ppc64 and ppc64le.
In addition, only ppc64 allocates space for VSX registers, so do
not save them for ppc32. The kernel only has references to
CONFIG_SPE in signal_32.c, so do not attempt to save them for ppc64.
Fixes: 95cda4c44e
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200407032105.26711-1-richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Noticed by Barnabás Virágh as a python-3.7 failue on qemu-alpha.
The bug shows up on alpha as it's one of the targets where
EPOLL_CLOEXEC differs from other targets:
sysdeps/unix/sysv/linux/alpha/bits/epoll.h: EPOLL_CLOEXEC = 01000000
sysdeps/unix/sysv/linux/bits/epoll.h: EPOLL_CLOEXEC = 02000000
Bug: https://bugs.gentoo.org/717548
Reported-by: Barnabás Virágh
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Riku Voipio <riku.voipio@iki.fi>
CC: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200415220508.5044-1-slyfox@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In the original bug report long files names in Guix caused
/proc/self/stat be truncated without the trailing ") " as specified in
proc manpage which says:
(2) comm %s
The filename of the executable, in parentheses. This
is visible whether or not the executable is swapped
out.
In the kernel this is currently done by do_task_stat calling
proc_task_name() which uses a structure limited by TASK_COMM_LEN (16).
Additionally it should only be reporting the executable name rather
than the full path. Fix both these failings while cleaning up the code
to use GString to build up the reported values. As the whole function
is cleaned up also adjust the white space to the current coding style.
Message-ID: <fb4c55fa-d539-67ee-c6c9-de8fb63c8488@inria.fr>
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-10-alex.bennee@linaro.org>
The target_flat.h file is a QEMU header, so we should include it using
quotes, not angle brackets.
Coverity otherwise is unable to find the header:
"../linux-user/flatload.c", line 40: error #1712: cannot open source file
"target_flat.h"
#include <target_flat.h>
^
because the relevant directory is only on the -iquote path, not the -I path.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200319193323.2038-5-peter.maydell@linaro.org
Don't use magic spaces, calculate the justification for the file
field like the kernel does with seq_pad.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200403191150.863-10-alex.bennee@linaro.org>
Unfortunately reading /proc/self/maps is still considered the gold
standard for a process finding out about it's own memory layout. As we
will want this data in other contexts soon factor out the code to read
and parse the data. Rather than just blindly copying the existing
sscanf based code we use a more modern glib version of the parsing
code to make a more general purpose map structure.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200403191150.863-9-alex.bennee@linaro.org>
Searching for memory space can cause problems so lets extend the
CPU_LOG_PAGE output so you can watch init_guest_space fail to
allocate memory. A more involved fix is actually required to make this
function play nicely with the large guard pages the sanitiser likes to
use.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200403191150.863-5-alex.bennee@linaro.org>
Checking TARGET_ABI_BITS is sketchy - we should check for the presence
of the define to be sure. Also clean up the white space while we are
there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200403191150.863-3-alex.bennee@linaro.org>
Add support for host and target futex_time64. If futex_time64 exists on
the host we try that first before falling back to the standard futex
syscall.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <d9390e368a9a1fd32d52aa771815e6e3d40cb1d4.1584571250.git.alistair.francis@wdc.com>
[lv: define sys_futex() if __NR_futex is defined (fix bug on 32bit host),
remove duplicate get_errno()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The first argument, timeval, is allowed to be NULL.
The second argument, timezone, was missing. While its use is
deprecated, it is still present in the syscall.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-6-richard.henderson@linaro.org>
[lv: add "#if defined(TARGET_NR_gettimeofday)"]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The page isn't (necessarily) present in the host /proc/self/maps,
and even if it might be it isn't present in page_flags, and even
if it was it might not have the same set of page permissions.
The easiest thing to do, particularly when it comes to the
"[vsyscall]" note at the end of line, is to special case it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-5-richard.henderson@linaro.org>
[lv: remove trailing space]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Notice the magic page during translate, much like we already
do for the arm32 commpage. At runtime, raise an exception to
return cpu_loop for emulation.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a bit tidier than open-coding the 5 lines necessary
to initialize the target_siginfo_t. In addition, this zeros
the remaining bytes of the target_siginfo_t, rather than
passing in garbage.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, the signal handler would be byte swapped if the target and
host CPU used different endianness. This would cause a SIGSEGV when
attempting to translate the opcode pointed to by the swapped address.
Thread 1 "qemu-ppc64" received signal SIGSEGV, Segmentation fault.
0x00000000600a9257 in ldl_he_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:351
351 __builtin_memcpy(&r, ptr, sizeof(r));
#0 0x00000000600a9257 in ldl_he_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:351
#1 0x00000000600a92fe in ldl_be_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:449
#2 0x00000000600c0790 in translator_ldl_swap at qemu/include/exec/translator.h:201
#3 0x000000006011c1ab in ppc_tr_translate_insn at qemu/target/ppc/translate.c:7856
#4 0x000000006005ae70 in translator_loop at qemu/accel/tcg/translator.c:102
The signal handler will be byte swapped as a result of the __get_user()
call in sigaction() if it is necessary, no additional swap is required.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200319133244.8818-1-vfazio@xes-inc.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use helper script scripts/gensyscalls.sh to generate the file.
Add TARGET_NR_or1k_atomic
Remove useless comments and blank lines.
Define diretly the __NR_XXX64 syscalls rather than using the
intermediate __NR3264 definition.
Remove wrong cut'n'paste (like "#ifdef __ARCH_WANT_SYNC_FILE_RANGE2")
Add new syscalls from 286 (preadv) to 434 (pidfd_open).
Remove obsolete syscalls 1204 (open) to 1079 (fork).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316085620.309769-5-laurent@vivier.eu>
Use helper script scripts/gensyscalls.sh to generate the file.
This adds TARGET_NR_llseek that was missing and remove syscalls 1024
to 1079.
Add new syscalls from 288 (pkey_mprotect) to 434 (pidfd_open)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200316085620.309769-4-laurent@vivier.eu>
Add a script to update the file from strace github and run it
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-22-laurent@vivier.eu>
[lv: added file in MAINTAINERS]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall_n32.tbl, syscall_n64.tbl and syscallhdr.sh from
linux/arch/parisc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offsets (6000 for n32 and 5000 for n64) from the file to
the Makefile.objs to be passed to syscallhdr.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-18-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/mips/kernel/syscalls/syscall_o32.tbl v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offset (4000) from the file to the Makefile.objs to be passed
to syscallhdr.sh
Rename on the fly fadvise64 to fadvise64_64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-17-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Define do_arch_prctl() for i386 and x86_64, but return -TARGET_ENOSYS
for i386.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-14-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We don't support other 32bit architecture.
Update file to comply with coding style (TAB).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-11-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/ppc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
and to not generate the entry if entry point is sys_ni_syscall.
Fix ppc/signal.c to define do_sigreturn() for TARGET_ABI32.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-10-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/arm/tools/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Update syscall.c to manage TARGET_NR_arm_sync_file_range as it has
replaced TARGET_NR_sync_file_range2
Move existing stuff from linux-user/Makefile.objs to
linux-user/arm/Makefile.objs
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200310103403.3284090-9-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
