We can fail the blk_insert_bs() at init_blk_migration(), leaving the
BlkMigDevState without a dirty_bitmap and BlockDriverState. Account
for the possibly missing elements when doing cleanup.
Fix the following crashes:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555ec83ef in bdrv_release_dirty_bitmap (bitmap=0x0) at ../block/dirty-bitmap.c:359
359 BlockDriverState *bs = bitmap->bs;
#0 0x0000555555ec83ef in bdrv_release_dirty_bitmap (bitmap=0x0) at ../block/dirty-bitmap.c:359
#1 0x0000555555bba331 in unset_dirty_tracking () at ../migration/block.c:371
#2 0x0000555555bbad98 in block_migration_cleanup_bmds () at ../migration/block.c:681
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555e971ff in bdrv_op_unblock (bs=0x0, op=BLOCK_OP_TYPE_BACKUP_SOURCE, reason=0x0) at ../block.c:7073
7073 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
#0 0x0000555555e971ff in bdrv_op_unblock (bs=0x0, op=BLOCK_OP_TYPE_BACKUP_SOURCE, reason=0x0) at ../block.c:7073
#1 0x0000555555e9734a in bdrv_op_unblock_all (bs=0x0, reason=0x0) at ../block.c:7095
#2 0x0000555555bbae13 in block_migration_cleanup_bmds () at ../migration/block.c:690
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230731203338.27581-1-farosas@suse.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit f187609f27)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit fe904ea824 added a fail_inactivate label, which tries to
reactivate disks on the source after a failure while s->state ==
MIGRATION_STATUS_ACTIVE, but didn't actually use the label if
qemu_savevm_state_complete_precopy() failed. This failure to
reactivate is also present in commit 6039dd5b1c (also covering the new
s->state == MIGRATION_STATUS_DEVICE state) and 403d18ae (ensuring
s->block_inactive is set more reliably).
Consolidate the two labels back into one - no matter HOW migration is
failed, if there is any chance we can reach vm_start() after having
attempted inactivation, it is essential that we have tried to restart
disks before then. This also makes the cleanup more like
migrate_fd_cancel().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230502205212.134680-1-eblake@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6dab4c93ec)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: minor context tweak near added comment in migration/migration.c)
No need to declare a temporary variable.
Suggested-by: Juan Quintela <quintela@redhat.com>
Fixes: 1df36e8c6289 ("migration: Handle block device inactivation failures better")
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit 5d39f44d7a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Consider what happens when performing a migration between two host
machines connected to an NFS server serving multiple block devices to
the guest, when the NFS server becomes unavailable. The migration
attempts to inactivate all block devices on the source (a necessary
step before the destination can take over); but if the NFS server is
non-responsive, the attempt to inactivate can itself fail. When that
happens, the destination fails to get the migrated guest (good,
because the source wasn't able to flush everything properly):
(qemu) qemu-kvm: load of migration failed: Input/output error
at which point, our only hope for the guest is for the source to take
back control. With the current code base, the host outputs a message, but then appears to resume:
(qemu) qemu-kvm: qemu_savevm_state_complete_precopy_non_iterable: bdrv_inactivate_all() failed (-1)
(src qemu)info status
VM status: running
but a second migration attempt now asserts:
(src qemu) qemu-kvm: ../block.c:6738: int bdrv_inactivate_recurse(BlockDriverState *): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed.
Whether the guest is recoverable on the source after the first failure
is debatable, but what we do not want is to have qemu itself fail due
to an assertion. It looks like the problem is as follows:
In migration.c:migration_completion(), the source sets 'inactivate' to
true (since COLO is not enabled), then tries
savevm.c:qemu_savevm_state_complete_precopy() with a request to
inactivate block devices. In turn, this calls
block.c:bdrv_inactivate_all(), which fails when flushing runs up
against the non-responsive NFS server. With savevm failing, we are
now left in a state where some, but not all, of the block devices have
been inactivated; but migration_completion() then jumps to 'fail'
rather than 'fail_invalidate' and skips an attempt to reclaim those
those disks by calling bdrv_activate_all(). Even if we do attempt to
reclaim disks, we aren't taking note of failure there, either.
Thus, we have reached a state where the migration engine has forgotten
all state about whether a block device is inactive, because we did not
set s->block_inactive in enough places; so migration allows the source
to reach vm_start() and resume execution, violating the block layer
invariant that the guest CPUs should not be restarted while a device
is inactive. Note that the code in migration.c:migrate_fd_cancel()
will also try to reactivate all block devices if s->block_inactive was
set, but because we failed to set that flag after the first failure,
the source assumes it has reclaimed all devices, even though it still
has remaining inactivated devices and does not try again. Normally,
qmp_cont() will also try to reactivate all disks (or correctly fail if
the disks are not reclaimable because NFS is not yet back up), but the
auto-resumption of the source after a migration failure does not go
through qmp_cont(). And because we have left the block layer in an
inconsistent state with devices still inactivated, the later migration
attempt is hitting the assertion failure.
Since it is important to not resume the source with inactive disks,
this patch marks s->block_inactive before attempting inactivation,
rather than after succeeding, in order to prevent any vm_start() until
it has successfully reactivated all devices.
See also https://bugzilla.redhat.com/show_bug.cgi?id=2058982
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit 403d18ae38)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unfortunately, commit f7b9dcfbcf broke populate_read_range(): the loop
end condition is very wrong, resulting in that function not populating the
full range. Lets' fix that.
Fixes: f7b9dcfbcf ("migration/ram: Factor out populating pages readable in ram_block_populate_pages()")
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit 5f19a44919)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If something goes wrong during uffd_change_protection(), we would miss
to unregister uffd-wp and not release our reference. Fix it by
performing the uffd_change_protection(true) last.
Note that a uffd_change_protection(false) on the recovery path without a
prior uffd_change_protection(false) is fine.
Fixes: 278e2f551a ("migration: support UFFD write fault processing in ram_save_iterate()")
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit 72ef3a3708)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
And it appears that what is wrong is the code. During bulk stage we
need to make sure that some block is dirty, but no games with
max_size at all.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Multifd thread model does not work for compression, explicitly disable it.
Note that previuosly even we can enable both of them, nothing will go
wrong, because the compression code has higher priority so multifd feature
will just be ignored. Now we'll fail even earlier at config time so the
user should be aware of the consequence better.
Note that there can be a slight chance of breaking existing users, but
let's assume they're not majority and not serious users, or they should
have found that multifd is not working already.
With that, we can safely drop the check in ram_save_target_page() for using
multifd, because when multifd=on then compression=off, then the removed
check on save_page_use_compression() will also always return false too.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The preempt mode requires the capability to assign channel for each of the
page, while the compression logic will currently assign pages to different
compress thread/local-channel so potentially they're incompatible.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In qemu_file_shutdown(), there's a possible race if with current order of
operation. There're two major things to do:
(1) Do real shutdown() (e.g. shutdown() syscall on socket)
(2) Update qemufile's last_error
We must do (2) before (1) otherwise there can be a race condition like:
page receiver other thread
------------- ------------
qemu_get_buffer()
do shutdown()
returns 0 (buffer all zero)
(meanwhile we didn't check this retcode)
try to detect IO error
last_error==NULL, IO okay
install ALL-ZERO page
set last_error
--> guest crash!
To fix this, we can also check retval of qemu_get_buffer(), but not all
APIs can be properly checked and ultimately we still need to go back to
qemu_file_get_error(). E.g. qemu_get_byte() doesn't return error.
Maybe some day a rework of qemufile API is really needed, but for now keep
using qemu_file_get_error() and fix it by not allowing that race condition
to happen. Here shutdown() is indeed special because the last_error was
emulated. For real -EIO errors it'll always be set when e.g. sendmsg()
error triggers so we won't miss those ones, only shutdown() is a bit tricky
here.
Cc: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When starting ram saving procedure (especially at the completion phase),
always set last_seen_block to non-NULL to make sure we can always correctly
detect the case where "we've migrated all the dirty pages".
Then we'll guarantee both last_seen_block and pss.block will be valid
always before the loop starts.
See the comment in the code for some details.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move flushing code from multifd_send_sync_main() to a new helper, and call
it in multifd_send_sync_main().
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
in the error case. The documentation in include/io/channel.h states
that -1 or QIO_CHANNEL_ERR_BLOCK should be returned upon error. Simply
passing along the return value from the bdrv-functions has the
potential to confuse the call sides. Non-blocking mode is not
implemented currently, so -1 it is.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Callers of coroutine_fn must be coroutine_fn themselves, or the call
must be within "if (qemu_in_coroutine())". Apply coroutine_fn to
functions where this holds.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-26-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
The previous iteration was commit a95942b50c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220923084254.4173111-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When we use BLK_MIG_BLOCK_SIZE in expressions like
block_mig_state.submitted * BLK_MIG_BLOCK_SIZE, this multiplication
is done as 32 bits, because both operands are 32 bits. Coverity
complains about possible overflows because we then accumulate that
into a 64 bit variable.
Define BLK_MIG_BLOCK_SIZE as unsigned long long using the ULL suffix.
The only two current uses of it with this problem are both in
block_save_pending(), so we could just cast to uint64_t there, but
using the ULL suffix is simpler and ensures that we don't
accidentally introduce new variants of the same issue in future.
Resolves: Coverity CID 1487136, 1487175
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220721115207.729615-3-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Coverity complains that when we use the return value from
migrate_multifd_compression() as an array index:
multifd_recv_state->ops = multifd_ops[migrate_multifd_compression()];
that this might overrun the array (which is declared to have size
MULTIFD_COMPRESSION__MAX). This is because the function return type
is MultiFDCompression, which is an autogenerated enum. The code
generator includes the "one greater than the maximum possible value"
MULTIFD_COMPRESSION__MAX in the enum, even though this is not
actually a valid value for the enum, and this makes Coverity think
that migrate_multifd_compression() could return that __MAX value and
index off the end of the array.
Suppress the Coverity error by asserting that the value we're going
to return is within range.
Resolves: Coverity CID 1487239, 1487254
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220721115207.729615-2-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commit cfd66f30fb.
The simplification of unqueue_page() introduced a bug that sometimes
breaks migration on s390x hosts.
The problem is not fully understood yet, but since we are already in
the freeze for QEMU 7.1 and we need something working there, let's
revert this patch for the upcoming release. The optimization can be
redone later again in a proper way if necessary.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2099934
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220802061949.331576-1-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Some of params->has_* = true are missing in migration_instance_init, this
causes migrate_params_check() to skip some tests, allowing some
unsupported scenarios.
Fix this by adding all missing params->has_* = true in
migration_instance_init().
Fixes: 69ef1f36b0 ("migration: define 'tls-creds' and 'tls-hostname' migration parameters")
Fixes: 1d58872a91 ("migration: do not wait for free thread")
Fixes: d2f1d29b95 ("migration: add support for a "tls-authz" migration parameter")
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20220726010235.342927-1-leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Migration with zero-copy-send currently has it's limitations, as it can't
be used with TLS nor any kind of compression. In such scenarios, it should
output errors during parameter / capability setting.
But currently there are some ways of setting this not-supported scenarios
without printing the error message:
!) For 'compression' capability, it works by enabling it together with
zero-copy-send. This happens because the validity test for zero-copy uses
the helper unction migrate_use_compression(), which check for compression
presence in s->enabled_capabilities[MIGRATION_CAPABILITY_COMPRESS].
The point here is: the validity test happens before the capability gets
enabled. If all of them get enabled together, this test will not return
error.
In order to fix that, replace migrate_use_compression() by directly testing
the cap_list parameter migrate_caps_check().
2) For features enabled by parameters such as TLS & 'multifd_compression',
there was also a possibility of setting non-supported scenarios: setting
zero-copy-send first, then setting the unsupported parameter.
In order to fix that, also add a check for parameters conflicting with
zero-copy-send on migrate_params_check().
3) XBZRLE is also a compression capability, so it makes sense to also add
it to the list of capabilities which are not supported with zero-copy-send.
Fixes: 1abaec9a1b ("migration: Change zero_copy_send from migration parameter to migration capability")
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20220719122345.253713-1-leobras@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reorder the structures so we can know if the fields are:
- Read only
- Their own locking (i.e. sems)
- Protected by 'mutex'
- Only for the multifd channel
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220531104318.7494-2-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Typo fixes from Chen Zhang
Some errors, like the lack of Scatter-Gather support by the network
interface(NETIF_F_SG) may cause sendmsg(...,MSG_ZEROCOPY) to fail on using
zero-copy, which causes it to fall back to the default copying mechanism.
After each full dirty-bitmap scan there should be a zero-copy flush
happening, which checks for errors each of the previous calls to
sendmsg(...,MSG_ZEROCOPY). If all of them failed to use zero-copy, then
increment dirty_sync_missed_zero_copy migration stat to let the user know
about it.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220711211112.18951-4-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220711211112.18951-3-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The code calls qio_channel_read() in a loop when it reports
QIO_CHANNEL_ERR_BLOCK. This code is reported when errno==EAGAIN.
As such the later block of code will always hit the 'errno != EAGAIN'
condition, making the final 'else' unreachable.
Fixes: Coverity CID 1490203
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220627135318.156121-1-berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With preemption mode on, when we see a postcopy request that was requesting
for exactly the page that we have preempted before (so we've partially sent
the page already via PRECOPY channel and it got preempted by another
postcopy request), currently we drop the request so that after all the
other postcopy requests are serviced then we'll go back to precopy stream
and start to handle that.
We dropped the request because we can't send it via postcopy channel since
the precopy channel already contains partial of the data, and we can only
send a huge page via one channel as a whole. We can't split a huge page
into two channels.
That's a very corner case and that works, but there's a change on the order
of postcopy requests that we handle since we're postponing this (unlucky)
postcopy request to be later than the other queued postcopy requests. The
problem is there's a possibility that when the guest was very busy, the
postcopy queue can be always non-empty, it means this dropped request will
never be handled until the end of postcopy migration. So, there's a chance
that there's one dest QEMU vcpu thread waiting for a page fault for an
extremely long time just because it's unluckily accessing the specific page
that was preempted before.
The worst case time it needs can be as long as the whole postcopy migration
procedure. It's extremely unlikely to happen, but when it happens it's not
good.
The root cause of this problem is because we treat pss->postcopy_requested
variable as with two meanings bound together, as the variable shows:
1. Whether this page request is urgent, and,
2. Which channel we should use for this page request.
With the old code, when we set postcopy_requested it means either both (1)
and (2) are true, or both (1) and (2) are false. We can never have (1)
and (2) to have different values.
However it doesn't necessarily need to be like that. It's very legal that
there's one request that has (1) very high urgency, but (2) we'd like to
use the precopy channel. Just like the corner case we were discussing
above.
To differenciate the two meanings better, introduce a new field called
postcopy_target_channel, showing which channel we should use for this page
request, so as to cover the old meaning (2) only. Then we leave the
postcopy_requested variable to stand only for meaning (1), which is the
urgency of this page request.
With this change, we can easily boost priority of a preempted precopy page
as long as we know that page is also requested as a postcopy page. So with
the new approach in get_queued_page() instead of dropping that request, we
send it right away with the precopy channel so we get back the ordering of
the page faults just like how they're requested on dest.
Reported-by: Manish Mishra <manish.mishra@nutanix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Manish Mishra <manish.mishra@nutanix.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185520.27583-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch is based on the async preempt channel creation. It continues
wiring up the new channel with TLS handshake to destionation when enabled.
Note that only the src QEMU needs such operation; the dest QEMU does not
need any change for TLS support due to the fact that all channels are
established synchronously there, so all the TLS magic is already properly
handled by migration_tls_channel_process_incoming().
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185518.27529-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's useful for specifying tls credentials all in the cmdline (along with
the -object tls-creds-*), especially for debugging purpose.
The trick here is we must remember to not free these fields again in the
finalize() function of migration object, otherwise it'll cause double-free.
The thing is when destroying an object, we'll first destroy the properties
that bound to the object, then the object itself. To be explicit, when
destroy the object in object_finalize() we have such sequence of
operations:
object_property_del_all(obj);
object_deinit(obj, ti);
So after this change the two fields are properly released already even
before reaching the finalize() function but in object_property_del_all(),
hence we don't need to free them anymore in finalize() or it's double-free.
This also fixes a trivial memory leak for tls-authz as we forgot to free it
before this patch.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185515.27475-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add migrate_channel_requires_tls() to detect whether the specific channel
requires TLS, leveraging the recently introduced migrate_use_tls(). No
functional change intended.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185513.27421-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add a property field that can conditionally disable the "break sending huge
page" behavior in postcopy preemption. By default it's enabled.
It should only be used for debugging purposes, and we should never remove
the "x-" prefix.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Manish Mishra <manish.mishra@nutanix.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185511.27366-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch allows the postcopy preempt channel to be created
asynchronously. The benefit is that when the connection is slow, we won't
take the BQL (and potentially block all things like QMP) for a long time
without releasing.
A function postcopy_preempt_wait_channel() is introduced, allowing the
migration thread to be able to wait on the channel creation. The channel
is always created by the main thread, in which we'll kick a new semaphore
to tell the migration thread that the channel has created.
We'll need to wait for the new channel in two places: (1) when there's a
new postcopy migration that is starting, or (2) when there's a postcopy
migration to resume.
For the start of migration, we don't need to wait for this channel until
when we want to start postcopy, aka, postcopy_start(). We'll fail the
migration if we found that the channel creation failed (which should
probably not happen at all in 99% of the cases, because the main channel is
using the same network topology).
For a postcopy recovery, we'll need to wait in postcopy_pause(). In that
case if the channel creation failed, we can't fail the migration or we'll
crash the VM, instead we keep in PAUSED state, waiting for yet another
recovery.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Manish Mishra <manish.mishra@nutanix.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185509.27311-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
To allow postcopy recovery, the ram fast load (preempt-only) dest QEMU thread
needs similar handling on fault tolerance. When ram_load_postcopy() fails,
instead of stopping the thread it halts with a semaphore, preparing to be
kicked again when recovery is detected.
A mutex is introduced to make sure there's no concurrent operation upon the
socket. To make it simple, the fast ram load thread will take the mutex during
its whole procedure, and only release it if it's paused. The fast-path socket
will be properly released by the main loading thread safely when there's
network failures during postcopy with that mutex held.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185506.27257-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch enables postcopy-preempt feature.
It contains two major changes to the migration logic:
(1) Postcopy requests are now sent via a different socket from precopy
background migration stream, so as to be isolated from very high page
request delays.
(2) For huge page enabled hosts: when there's postcopy requests, they can now
intercept a partial sending of huge host pages on src QEMU.
After this patch, we'll live migrate a VM with two channels for postcopy: (1)
PRECOPY channel, which is the default channel that transfers background pages;
and (2) POSTCOPY channel, which only transfers requested pages.
There's no strict rule of which channel to use, e.g., if a requested page is
already being transferred on precopy channel, then we will keep using the same
precopy channel to transfer the page even if it's explicitly requested. In 99%
of the cases we'll prioritize the channels so we send requested page via the
postcopy channel as long as possible.
On the source QEMU, when we found a postcopy request, we'll interrupt the
PRECOPY channel sending process and quickly switch to the POSTCOPY channel.
After we serviced all the high priority postcopy pages, we'll switch back to
PRECOPY channel so that we'll continue to send the interrupted huge page again.
There's no new thread introduced on src QEMU.
On the destination QEMU, one new thread is introduced to receive page data from
the postcopy specific socket (done in the preparation patch).
This patch has a side effect: after sending postcopy pages, previously we'll
assume the guest will access follow up pages so we'll keep sending from there.
Now it's changed. Instead of going on with a postcopy requested page, we'll go
back and continue sending the precopy huge page (which can be intercepted by a
postcopy request so the huge page can be sent partially before).
Whether that's a problem is debatable, because "assuming the guest will
continue to access the next page" may not really suite when huge pages are
used, especially if the huge page is large (e.g. 1GB pages). So that locality
hint is much meaningless if huge pages are used.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185504.27203-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Create a new socket for postcopy to be prepared to send postcopy requested
pages via this specific channel, so as to not get blocked by precopy pages.
A new thread is also created on dest qemu to receive data from this new channel
based on the ram_load_postcopy() routine.
The ram_load_postcopy(POSTCOPY) branch and the thread has not started to
function, and that'll be done in follow up patches.
Cleanup the new sockets on both src/dst QEMUs, meanwhile look after the new
thread too to make sure it'll be recycled properly.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185502.27149-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: With Peter's fix to quieten compiler warning on
start_migration
Firstly, postcopy already preempts precopy due to the fact that we do
unqueue_page() first before looking into dirty bits.
However that's not enough, e.g., when there're host huge page enabled, when
sending a precopy huge page, a postcopy request needs to wait until the whole
huge page that is sending to finish. That could introduce quite some delay,
the bigger the huge page is the larger delay it'll bring.
This patch adds a new capability to allow postcopy requests to preempt existing
precopy page during sending a huge page, so that postcopy requests can be
serviced even faster.
Meanwhile to send it even faster, bypass the precopy stream by providing a
standalone postcopy socket for sending requested pages.
Since the new behavior will not be compatible with the old behavior, this will
not be the default, it's enabled only when the new capability is set on both
src/dst QEMUs.
This patch only adds the capability itself, the logic will be added in follow
up patches.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185342.26794-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
zlib_send_prepare() compresses pages of a running VM. zlib does not
make any thread-safety guarantees with respect to changing deflate()
input concurrently with deflate() [1].
One can observe problems due to this with the IBM zEnterprise Data
Compression accelerator capable zlib [2]. When the hardware
acceleration is enabled, migration/multifd/tcp/plain/zlib test fails
intermittently [3] due to sliding window corruption. The accelerator's
architecture explicitly discourages concurrent accesses [4]:
Page 26-57, "Other Conditions":
As observed by this CPU, other CPUs, and channel
programs, references to the parameter block, first,
second, and third operands may be multiple-access
references, accesses to these storage locations are
not necessarily block-concurrent, and the sequence
of these accesses or references is undefined.
Mark Adler pointed out that vanilla zlib performs double fetches under
certain circumstances as well [5], therefore we need to copy data
before passing it to deflate().
[1] https://zlib.net/manual.html
[2] https://github.com/madler/zlib/pull/410
[3] https://lists.nongnu.org/archive/html/qemu-devel/2022-03/msg03988.html
[4] http://publibfp.dhe.ibm.com/epubs/pdf/a227832c.pdf
[5] https://lists.gnu.org/archive/html/qemu-devel/2022-07/msg00889.html
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220705203559.2960949-1-iii@linux.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
abstract out dirty log change logic into function
global_dirty_log_change.
abstract out dirty page rate calculation logic via
dirty-ring into function vcpu_calculate_dirtyrate.
abstract out mathematical dirty page rate calculation
into do_calculate_dirtyrate, decouple it from DirtyStat.
rename set_sample_page_period to dirty_stat_wait, which
is well-understood and will be reused in dirtylimit.
handle cpu hotplug/unplug scenario during measurement of
dirty page rate.
export util functions outside migration.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <7b6f6f4748d5b3d017b31a0429e630229ae97538.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pread(blk, offset, buf, bytes, flags)
+ blk_pread(blk, offset, bytes, buf, flags)
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pwrite(blk, offset, buf, bytes, flags)
+ blk_pwrite(blk, offset, bytes, buf, flags)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes; @@
- blk_pread(blk, offset, buf, bytes)
+ blk_pread(blk, offset, buf, bytes, 0)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Now that all QEMUFile callbacks are removed, the entire concept can be
deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the get_return_path logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the writev_buffer logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the get_buffer logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup len = *-*EIO as spotted by Peter Xu
This directly implements the close logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the set_blocking logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This directly implements the shutdown logic using QIOChannel APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Prepare for the elimination of QEMUFileOps by introducing a pair of new
constructors. This lets us distinguish between an input and output file
object explicitly rather than via the existance of specific callbacks.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only callers of qemu_fopen_ops pass 'true' for the 'has_ioc'
parameter, so hardcode this assumption in QEMUFile, by passing in
the QIOChannel object as a non-opaque parameter.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed long line
The only user of the hooks is RDMA which provides a QIOChannel backed
impl of QEMUFile. It can thus use the qemu_file_get_ioc() method.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
