msgsnd has a broadcast mode that sends hypervisor doorbells to all
threads belonging to the same core as the target. A "subcore" mode
sends to all or one thread depending on 1LPAR mode.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
attn is an implementation-specific instruction that on POWER (and G5/
970) can be enabled with a HID bit (disabled = illegal), and executing
it causes the host processor to stop and the service processor to be
notified. Generally used for debugging.
Implement attn and make it checkstop the system, which should be good
enough for QEMU debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Change the logging not to print to stderr as well, because a
checkstop is a guest error (or perhaps a simulated machine error)
rather than a QEMU error, so send it to the log.
Update the checkstop message, and log CPU registers too.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
checkstop state does not halt the system, interrupts continue to be
serviced, and other CPUs run. Make it stop the machine with
qemu_system_guest_panicked.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
cmp{rb, eqb}, t{w, d} : X-form
t{w, d}i : D-form
isel : A-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also for CMPRB, following review comments :
Replaced repetition of arithmetic right shifting (tcg_gen_shri_i32) followed
by extraction of last 8 bits (tcg_gen_ext8u_i32) with extraction of the required
bits using offsets (tcg_gen_extract_i32).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
PPC_VIRTUAL_HYPERVISOR_GET_CLASS is used in critical operations like
interrupts and TLB misses and is quite costly. Running the
kvm-unit-tests sieve program with radix MMU enabled thrashes the TCG
TLB and spends a lot of time in TLB and page table walking code. The
test takes 67 seconds to complete with a lot of time being spent in
code related to finding the vhyp class:
12.01% [.] g_str_hash
8.94% [.] g_hash_table_lookup
8.06% [.] object_class_dynamic_cast
6.21% [.] address_space_ldq
4.94% [.] __strcmp_avx2
4.28% [.] tlb_set_page_full
4.08% [.] address_space_translate_internal
3.17% [.] object_class_dynamic_cast_assert
2.84% [.] ppc_radix64_xlate
Keep a pointer to the class and avoid this lookup. This reduces the
execution time to 40 seconds.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
'abi_ptr' is a user specific type. The system emulation
equivalent is 'target_ulong'. Use it in ppc_ldl_code()
to emphasis this is not an user emulation function.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231211212003.21686-18-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Hardware clears the MSR[ME] bit when delivering a machine check
interrupt, so that is what QEMU does.
The spapr environment runs in supervisor mode though, and receives
machine check interrupts after they are processed by the hypervisor,
and MSR[ME] must always be enabled in supervisor mode (otherwise it
could checkstop the system). So MSR[ME] must not be cleared when
delivering machine checks to the supervisor.
The fix to prevent supervisor mode from modifying MSR[ME] also
prevented it from re-enabling the incorrectly cleared MSR[ME] bit
when returning from handling the interrupt. Before that fix, the
problem was not very noticable with well-behaved code. So the
Fixes tag is not strictly correct, but practically they go together.
Found by kvm-unit-tests machine check tests (not yet upstream).
Fixes: 678b6f1af7 ("target/ppc: Prevent supervisor from modifying MSR[ME]")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
These wrappers call out to handle POWER7 and newer in separate
functions but reduce to the generic case when TARGET_PPC64 is not
defined. It is easy enough to include the switch in the beginning of
the generic functions to branch out to the specific functions and get
rid of these wrappers. This avoids one indirection and entirely
compiles out the switch without TARGET_PPC64.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Concatenate #if blocks that are ending then beginning on the next line
again.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Remove check for !defined(CONFIG_USER_ONLY) as this is already within
an #ifndef CONFIG_USER_ONLY block.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use #ifdef, #ifndef for brevity and add comments to #endif that are
more than a few lines apart for clarity.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Improve readability by shortening some long comments, removing
comments that state the obvious and dropping some empty lines so they
don't distract when reading the code.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use the env_cpu function to get the CPUState for cpu_abort. These are
only needed in case of fatal errors so this allows to avoid casting
and storing CPUState in a local variable wnen not needed.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-22-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
is_prefix_insn_excp() loads the first word of the instruction address
which caused an exception, to determine whether or not it was prefixed
so the prefix bit can be set in [H]SRR1.
This works if the instruction image can be loaded, but if the exception
was caused by an ifetch, this load could fail and cause a recursive
exception and crash. Machine checks caused by ifetch are not excluded
from the prefix check and can crash (see issue 2108 for an example).
Fix this by excluding machine checks caused by ifetch from the prefix
check.
Cc: qemu-stable@nongnu.org
Acked-by: Cédric Le Goater <clg@kaod.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2108
Fixes: 55a7fa34f8 ("target/ppc: Machine check on invalid real address access on POWER9/10")
Fixes: 5a5d3b23cb ("target/ppc: Add SRR1 prefix indication to interrupt handlers")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When CPUArchState* is available (here CPUPPCState*), we
can use the fast env_archcpu() macro to get ArchCPU* (here
PowerPCCPU*). The QOM cast POWERPC_CPU() macro will be
slower when building with --enable-qom-cast-debug.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20231009110239.66778-2-philmd@linaro.org>
Convention is to reset the exception_index and error_code after handling
an interrupt. The vhyp hcall handler fails to do this. This does not
appear to have ill effects because cpu_handle_exception() clears
exception_index later, but it is fragile and inconsistent. Reset the
exception state after handling vhyp hcall like other handlers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v2.07S introduced the watchpoint facility based on the DAWR0
and DAWRX0 SPRs. Implement this in TCG.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v2.07S introduced the breakpoint facility based on the CIABR SPR.
Implement this in TCG.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Improve the emulation accuracy of the single step and branch trace
interrupts for v2.07S. Set SRR1[33]=1, and set SIAR to completed
instruction address.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
HDEC is defined to not wake from PM state. There is a check in the HDEC
timer to avoid setting the interrupt if we are in a PM state, but no
check on PM entry to lower HDEC if it already fired. This can cause a
HDECR wake up and QEMU abort with unsupported exception in Power Save
mode.
Fixes: 4b236b621b ("ppc: Initial HDEC support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230726182230.433945-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc currently silently accepts invalid real address access. Catch
these and turn them into machine checks on POWER9/10 machines.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230703120301.45313-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Power ISA has the concept of sub-processors:
Hardware is allowed to sub-divide a multi-threaded processor into
"sub-processors" that appear to privileged programs as multi-threaded
processors with fewer threads.
POWER9 and POWER10 have two modes, either every thread is a
sub-processor or all threads appear as one multi-threaded processor. In
the user manuals these are known as "LPAR per thread" / "Thread LPAR",
and "LPAR per core" / "1 LPAR", respectively.
The practical difference is: in thread LPAR mode, non-hypervisor SPRs
are not shared between threads and msgsndp can not be used to message
siblings. In 1 LPAR mode, some SPRs are shared and msgsndp is usable.
Thrad LPAR allows multiple partitions to run concurrently on the same
core, and is a requirement for KVM to run on POWER9/10 (which does not
gang-schedule an LPAR on all threads of a core like POWER8 KVM).
Traditionally, SMT in PAPR environments including PowerVM and the
pseries QEMU machine with KVM acceleration behaves as in 1 LPAR mode.
In OPAL systems, Thread LPAR is used. When adding SMT to the powernv
machine, it is therefore preferable to emulate Thread LPAR.
To account for this difference between pseries and powernv, an LPAR mode
flag is added such that SPRs can be implemented as per-LPAR shared, and
that becomes either per-thread or per-core depending on the flag.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can get CPUState from env with env_cpu without going through
PowerPCCPU and casting that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <28424220f37f51ce97f24cadc7538a9c0d16cb45.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some helpers only have a CPUState local to call cpu_interrupt_exittb()
but we can use env_cpu for that and remove the local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <aa34e449552c6ab52d48938ccbe762fc06adac01.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All powerpc exception handlers share some code when handling machine
check exceptions. Move this to a common function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <9cfffaa35aa894086dd092af6b0b26f2d62ff3de.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
CPUState is rarely needed by this function (only for logging a fatal
error) and it's easy to get from the env parameter so passing it
separately is not necessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <f42761401c708fd6e02f7523d9f709b1972e5863.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Doorbells in SMT need to coordinate msgsnd/msgclr and DPDES access from
multiple threads that affect the same state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
System call interrupts in ISA v3.1 CPUs add a LEV indication in SRR1
that corresponds with the LEV field of the instruction that caused the
interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The hypervisor emulation assistance interrupt modifies HEIR to
contain the value of the instruction which caused the exception.
Only TCG raises HEAI interrupts so this can be made TCG-only.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v3.1 introduced prefix instructions. Among the changes, various
synchronous interrupts report whether they were caused by a prefix
instruction in (H)SRR1.
The case of instruction fetch that causes an HDSI due to access of a
process-scoped table faulting on the partition scoped translation is the
tricky one. As with ISIs and HISIs, this does not try to set the prefix
bit because there is no instruction image to be loaded. The HDSI needs
the originating access type to be passed through to the handler to
distinguish this from HDSIs that fault translating process scoped tables
originating from a load or store instruction (in that case the prefix
bit should be provided).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch issues ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
powerpc ifetch endianness depends on MSR[LE] so it has to byteswap
after cpu_ldl_code(). This corrects DSISR bits in alignment
interrupts when running in little endian mode.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Count exceptions which can be queried with info irq monitor command.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606220200.7EBCC74635C@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PMU raises a performance monitor exception (causing an interrupt
when MSR[EE]=1) when MMCR0[PMAO] is set, and lowers it when clear.
Wire this up and implement the interrupt delivery for books. Linux perf
record can now collect PMI-driven samples.
fire_PMC_interrupt is renamed to perfm_alert, which matches a bit closer
to the new terminology used in the ISA and distinguishes the alert
condition (e.g., counter overflow) from the PERFM (or EBB) interrupts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530134313.387252-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
BookS msgsndp instruction to self or DPDES register can cause SDOOR
interrupts which crash QEMU with exception not implemented.
Linux does not use msgsndp in SMT1, and KVM only uses DPDES to cause
doorbells when emulating a SMT guest (which is not the default), so
this has gone unnoticed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230530130526.372701-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msgclrp matches msgsndp and should clear PPC_INTERRUPT_DOORBELL.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230530130714.373215-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc hypervisors turn HEAI interrupts into program interrupts injected
into the guest that executed the illegal instruction, if the hypervisor
doesn't handle it some other way.
The nested-hv implementation failed to account for this HEAI->program
conversion. The virtual hypervisor wants to see the HEAI when running
a nested guest, so that interrupt type can be returned to its KVM
caller.
Fixes: 7cebc5db2e ("target/ppc: Introduce a vhyp framework for nested HV support")
Cc: balaton@eik.bme.hu
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230530132127.385001-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This optional behavior was removed from the ISA in v3.0, see
Summary of Changes preface:
Data Storage Interrupt Status Register for Alignment Interrupt:
Simplifies the Alignment interrupt by remov- ing the Data Storage
Interrupt Status Register (DSISR) from the set of registers modified
by the Alignment interrupt.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230515092655.171206-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adds checks to the hashst and hashchk instructions to only execute if
enabled by the relevant aspect in the DEXCR and HDEXCR.
This behaviour is guarded behind TARGET_PPC64 since Power10 is
currently the only implementation which has the DEXCR.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Message-Id: <20221220042330.2387944-3-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Kowshik reported that building qemu with GCC 12.2.1 for 'ppc64-softmmu'
target is failing due to following build warnings:
<snip>
../target/ppc/cpu_init.c:7018:13: error: 'ppc_restore_state_to_opc' defined but not used [-Werror=unused-function]
7018 | static void ppc_restore_state_to_opc(CPUState *cs,
<snip>
Fix this by wrapping these function definitions in 'ifdef CONFIG_TCG' so that
they are only defined if qemu is compiled with '--enable-tcg'
Reported-by: Kowshik Jois B S <kowsjois@linux.ibm.com>
Fixes: 61bd1d2942 ("target/ppc: Convert to tcg_ops restore_state_to_opc")
Fixes: 670f1da374 ("target/ppc: Implement hashst and hashchk")
Fixes: 53ae2aeb94 ("target/ppc: Implement hashstp and hashchkp")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1319
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Kowshik Jois B S <kowsjois@linux.vnet.ibm.com>
Message-Id: <20221116131743.658708-1-vaibhav@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
