There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.
iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test fails if bochs not whitelisted, so, skip it in this case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We do not support this combination (yet), so this should yield an error
message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A lot of tests run fine on FreeBSD and macOS, too - the limitation
to Linux here was likely just copied-and-pasted from other tests.
Thus remove the "_supported_os Linux" line from tests that run
successful in our CI pipelines on FreeBSD and macOS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the "amend" section of 082, we perform a single "convert" test
(namely "convert -o help"). That does not make sense, especially
because we have done exactly that "convert" test earlier in 082 already.
Replacing "convert" by "amend" yields an error, which is correct because
there is no point in "amend" having a default format. The user has to
either specify the format, or give a file for qemu-img to probe.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Patch created mechanically by running:
$ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
| while read f; do \
sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
done
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bash allows functions to be declared with or without the leading
keyword 'function'; but including the keyword does not comply with
POSIX syntax, and is confusing to ksh users where the use of the
keyword changes the scoping rules for functions. Stick to the
POSIX form through iotests.
Done mechanically with:
sed -i 's/^function //' $(git ls-files tests/qemu-iotests)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181116215002.2124581-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Running
git grep '\$here' tests/qemu-iotests
has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed the last
use. So execute the following cmd to remove all of
the 'here=...' lines as dead code.
sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds test cases to 082 for qemu-img create/convert/amend "-o help"
on formats that do not support creation or amendment, respectively.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Or, rather, force the open of a backing image if one was specified
for creation. Using a similar -unsafe option as rebase, allow qemu-img
to ignore the backing file validation if possible.
It may not always be possible, as in the existing case when a filesize
for the new image was not specified.
This is accomplished by shifting around the conditionals in
bdrv_img_create, such that a backing file is always opened unless we
provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag
when -u is provided to create.
Sorry for the heinous looking diffstat, but it's mostly whitespace.
Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous commit removed the last usage of ${tmp} inside the tests
themselves; the only remaining users are sourced by check. So we can now
drop this variable from the tests.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1460472980-26319-4-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 082.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to possible automatic regression and performance
testing for the block layer I found that the iotests don't work
for all protocols anymore.
In commit 1f7bf7d0 I started to change supported protocols from
generic to file for various tests. Unfortunately, some tests
added in the meantime again carry generic protocol altough they
can only work with file because they require local file access.
The other way around for some tests that only support file I added
NFS protocol after confirming they work.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img info should only be used directly if the format-specific
information or the name of the format is relevant (some tests explicitly
test format-specific information; test 082 uses qcow2-specific settings
to test the qemu-img interface); otherwise, tests should always use
_img_info instead.
Test 082 was touched only partially. It does test the qemu-img
interface; however, its invocations of qemu-img info are not real tests
but rather verifications, so if format-specific information is not
important for the test, there is no reason not to use _img_info. In
contrast to directly invoking qemu-img info, "qcow2" is replaced by
"IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in
_supported_fmt), I consider this an improvement.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>