Skip the tests if socket_check_protocol_support() failed, but do run
g_test_run() to keep TAP harness happy.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes the following failure with --enable-debug:
/tmp/qemu-test/src/tests/test-char.c:838:10: runtime error: load of value 40, which is not a valid value for type bool
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior /tmp/qemu-test/src/tests/test-char.c:838:10 in
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the socket is connecting or connected, tcp_chr_update_read_handler will
be called but it should not set the NetListener's callbacks again.
Otherwise, tcp_chr_accept is invoked while the socket is in connected
state and you get an assertion failure.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190202110834.24880-1-pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The current socket chardev tests try to exercise the chardev socket
driver in both server and client mode at the same time. The chardev API
is not very well designed to handle both ends of the connection being in
the same process so this approach makes the test case quite unpleasant
to deal with.
This splits the tests into distinct cases, one to test server socket
chardevs and one to test client socket chardevs. In each case the peer
is run in a background thread using the simpler QIOChannelSocket APIs.
The main test case code can now be written in a way that mirrors the
typical usage from within QEMU.
In doing this recfactoring it is possible to greatly expand the test
coverage for the socket chardevs to test all combinations except for a
server operating in blocking wait mode.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-16-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If no valid char driver was identified the qemu_chr_parse_compat method
was silent, leaving callers no clue what failed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-8-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Validate that frontend callbacks for CHR_EVENT_OPENED/CHR_EVENT_CLOSED
events are being issued when expected and in strictly pairing order.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <ac67ff2d27dd51a0075d5d634355c9e4f7bb53de.1541507990.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Test order:
Creating server websocket chardev
Creating usual tcp chardev client
Sending handshake message from client
Receiving handshake reply
Sending ping frame with "hello" payload
Receiving pong reply
Sending binary data "world"
Checking the received data on server side
Checking of closing handshake
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20181018223501.21683-4-jusual@mail.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This test exhibits a regression fixed by the previous reverts.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180817135224.22971-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter reported a test failure on FreeBSD with the new reconnect test:
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
gtester -k --verbose -m=quick tests/test-char
TEST: tests/test-char... (pid=16190)
/char/null: OK
/char/invalid: OK
/char/ringbuf: OK
/char/mux: OK
/char/stdio: OK
/char/pipe: OK
/char/file: OK
/char/file-fifo: OK
/char/udp: OK
/char/serial: OK
/char/hotswap: OK
/char/socket/basic: OK
/char/socket/reconnect: FAIL
GTester: last random seed: R02S521380d9c12f1dac3ad1763bf5665c27
(pid=16367)
/char/socket/fdpass: OK
FAIL: tests/test-char
**
ERROR:tests/test-char.c:353:char_socket_test_common: assertion failed:
(object_property_get_bool(OBJECT(chr_client), "connected",
&error_abort))
It turns out that the socket test code checks both server and client
connection states, but doesn't wait for both.
Wait for the client side as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180823143125.16767-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check should be unnecessary since commit
e7b3af8159 "glib: bump min required glib
library version to 2.40".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180730153639.26466-1-marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit fb5e19d2e1 originally fixed the
regression, but was inadvertently broken again in merge commit
2d6752d38d.
Fixes:
https://bugs.launchpad.net/qemu/+bug/1654137
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515152500.19460-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
When starting QEMU management apps will usually setup a monitor socket, and
then open it immediately after startup. If not using QEMU's own -daemonize
arg, this process can be troublesome to handle correctly. The mgmt app will
need to repeatedly call connect() until it succeeds, because it does not
know when QEMU has created the listener socket. If can't retry connect()
forever though, because an error might have caused QEMU to exit before it
even creates the monitor.
The obvious way to fix this kind of problem is to just pass in a pre-opened
socket file descriptor for the QEMU monitor to listen on. The management
app can now immediately call connect() just once. If connect() fails it
knows that QEMU has exited with an error.
The SocketAddress(Legacy) structs allow for FD passing via the monitor, and
now via inherited file descriptors from the process that spawned QEMU. The
final missing piece is adding a 'fd' parameter in the socket chardev
options.
This allows both HMP usage, pass any FD number with SCM_RIGHTS, then
running HMP commands:
getfd myfd
chardev-add socket,fd=myfd
Note that numeric FDs cannot be referenced directly in HMP, only named FDs.
And also CLI usage, by leak FD 3 from parent by clearing O_CLOEXEC, then
spawning QEMU with
-chardev socket,fd=3,id=mon
-mon chardev=mon,mode=control
Note that named FDs cannot be referenced in CLI args, only numeric FDs.
We do not wire this up in the legacy chardev syntax, so you cannot use FD
passing with '-qmp', you must use the modern '-mon' + '-chardev' pair.
When passing pre-opened FDs there is a restriction on use of TLS encryption.
It can be used on a server socket chardev, but cannot be used for a client
socket chardev. This is because when validating a server's certificate, the
client needs to have a hostname available to match against the certificate
identity.
An illustrative example of usage is:
#!/usr/bin/perl
use IO::Socket::UNIX;
use Fcntl;
unlink "/tmp/qmp";
my $srv = IO::Socket::UNIX->new(
Type => SOCK_STREAM(),
Local => "/tmp/qmp",
Listen => 1,
);
my $flags = fcntl $srv, F_GETFD, 0;
fcntl $srv, F_SETFD, $flags & ~FD_CLOEXEC;
my $fd = $srv->fileno();
exec "qemu-system-x86_64", \
"-chardev", "socket,fd=$fd,server,nowait,id=mon", \
"-mon", "chardev=mon,mode=control";
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce ChardevClass.chr_machine_done() hook so that chardevs can run
customized procedures after machine init.
There was an existing mux user already that did similar thing but used a
raw machine done notifier. Generalize it into a framework, and let the
mux chardevs provide such a class-specific hook to achieve the same
thing. Then we can move the mux related code to the char-mux.c file.
Since at it, replace the mux_realized variable with the global
machine_init_done varible.
This notifier framework will be further leverged by other type of
chardevs soon.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-6-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Check the expected behaviour of qemu_chr_be_event() on a mux chardev.
For some reason, sending the event on the base chardev broadcast to
all frontends, while sending it on the mux chardev itself should
trigger the event on the currently focused chardev frontend.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20171103152824.21948-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
makes it possible to test the existing chardev-file
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-9-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
makes it possible to test the existing chardev-udp
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-8-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this is only not a problem if the test is last in a suite,
otherwise it makes the following main_loop() calls to fail
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-7-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In QEMU's main_loop() we used to check whether we should do
a nonblocking call to main_loop(); this was deleted in commit e330c118f2,
because now that vCPUs always drop the I/O thread lock it is an unnecessary
optimization.
The loop in test-char.c copied the old QEMU main_loop() code, but
here the nonblocking check has never been necessary because this
standalone test case doesn't hold the I/O lock anyway. Remove it,
so we can drop the main_loop_wait() return value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1498584769-12439-2-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sending a break on a serial console can be useful for debugging the
guest. But not all chardev backends support sending breaks (only telnet
and mux do). The chardev-send-break command allows to send a break even
if using other backends.
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170611074817.13621-1-sf@sfritsch.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use 'send a break' in all 3 pieces of text as suggested by eblake
Quite limited test, to check that the chardev can be created with a
path and with the tty alias.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This simplifies removing a backend for a frontend user (no need to
retrieve the associated driver and separate delete call etc).
NB: many frontends have questionable handling of ending a chardev. They
should probably delete the backend to prevent broken reusage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a /chardevs container object to hold the list of chardevs.
(Note: QTAILQ chardevs is going away in the following commits)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
