This patch enables using -loadvm in recording mode to allow starting
the execution recording from any of the available snapshots.
It also fixes loading of the record/replay state, therefore snapshots
created in replay mode may also be used for starting the new recording.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180912081939.3228.56131.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register an exit notifier to remove the PID file. By the time atexit()
is called, qemu_write_pidfile() guarantees QEMU owns the PID file,
thus we could safely remove it when exiting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180907121319.8607-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This supercedes Juan's pull from the 13th
-----BEGIN PGP SIGNATURE-----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=JP00
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180926a' into staging
Migration pull 2018-09-26
This supercedes Juan's pull from the 13th
# gpg: Signature made Wed 26 Sep 2018 18:07:30 BST
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20180926a:
migration/ram.c: Avoid taking address of fields in packed MultiFDInit_t struct
migration: fix the compression code
migration: fix QEMUFile leak
tests/migration: Speed up the test on ppc64
migration: cleanup in error paths in loadvm
migration/postcopy: Clear have_listen_thread
tests/migration: Add migration-test header file
tests/migration: Support cross compilation in generating boot header file
tests/migration: Convert x86 boot block compilation script into Makefile
migration: use save_page_use_compression in flush_compressed_data
migration: show the statistics of compression
migration: do not flush_compressed_data at the end of iteration
Add a hint message to loadvm and exits on failure
migration: handle the error condition properly
migration: fix calculating xbzrle_counters.cache_miss_rate
migration/rdma: Fix uninitialised rdma_return_path
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove -sandbox option if the host is not capable of TSYNC, since the
sandbox will fail at setup time otherwise. This will help libvirt, for
ex, to figure out if -sandbox will work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
This patch adds a small hint for the failure case of the load snapshot
process. It may be useful for users to remember that the VM
configuration has changed between the save and load processes.
(qemu) loadvm vm-20180903083641
Unknown savevm section or instance 'cpu_common' 4.
Make sure that your current VM setup matches your saved VM setup, including any hotplugged devices
Error -22 while loading VM state
(qemu) device_add host-spapr-cpu-core,core-id=4
(qemu) loadvm vm-20180903083641
(qemu) c
(qemu) info status
VM status: running
It also exits Qemu if the snapshot cannot be loaded before reaching the
main loop (-loadvm in the command line).
$ qemu-system-ppc64 ... -loadvm vm-20180903083641
qemu-system-ppc64: Unknown savevm section or instance 'cpu_common' 4.
Make sure that your current VM setup matches your saved VM setup, including any hotplugged devices
qemu-system-ppc64: Error -22 while loading VM state
$
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.ibm.com>
Message-Id: <20180903162613.15877-1-joserz@linux.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These options likely do not work as expected as soon as the user
tries to use more than one network interface at once. The parameters
have been marked as deprecated since QEMU v2.6, so users had plenty
of time to move their scripts to the new syntax. Time to remove the
old parameters now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Deprecated since two releases, nobody complained, thus it's time to
remove them now.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's the same as -no-user-config and marked as deprecated since three
releases already. Time to remove it now.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "-balloon" option has been replaced by "-device virtio-balloon".
It's been marked as deprecated since two releases, and nobody
complained, so let's remove it now.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu command fails to process -overcommit option. Add the missing
call to qemu_add_opts() in vl.c.
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
Message-Id: <20180815175704.105902-1-prasad.singamsetty@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running qtests with -nodefaults, we are not interested in
these 'XYZ has no peer' messages.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -n '[<>][<>]= ?[1-5]0'
and modified manually.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-44-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kexec/kdump as well as the bootloader use a subcode of diagnose 308
that is supposed to reset the I/O subsystem but not comprise a full
"reboot". With the latest refactoring this is now broken when
-no-reboot is used or when libvirt acts on a reboot QMP event, for
example a virt-install from iso images.
We need to mark these "subsystem resets" as special.
Fixes: a30fb811cb (s390x: refactor reset/reipl handling)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180622102928.173420-1-borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With this flag, kvm allows guest to control host CPU power state. This
increases latency for other processes using same host CPU in an
unpredictable way, but if decreases idle entry/exit times for the
running VCPU, so to use it QEMU needs a hint about whether host CPU is
overcommitted, hence the flag name.
Follow-up patches will expose this capability to guest
(using mwait leaf).
Based on a patch by Wanpeng Li <kernellwp@gmail.com> .
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20180622192148.178309-2-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We currently have got three ways of turning on the HAX accelerator:
"-machine accel=hax", "-accel hax" and "-enable-hax". That's really
confusing and overloaded. Since "-accel" is our preferred way to enable
an accelerator nowadays, and "-accel hax" is even less to type than
"-enable-hax", let's deprecate the "-enable-hax" option now.
Note: While "-enable-kvm" is available since a long time and can hardly be
removed since it is used in a lot of upper layer tools and scripts, the
"-enable-hax" option is still rather new and not very widespread yet, so
I think that it should be OK if we remove this in a couple of releases again
(we'll see whether someone complains after seeing the deprecation message -
then we could still reconsider to keep it if there a well-founded reasons).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529950933-28347-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The oldest machine type which is still used in a still maintained distro
is a pc-0.12 based machine type in RHEL6, so everything that is older
than pc-0.12 should not be used anymore. Thus let's deprecate pc-0.10
and pc-0.11 so that we can finally remove them in a future release.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529917512-10528-1-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
some users when using --daemonize expect that QEMU will parse CLI options,
initialize VM and only then complete daemonzation by signalling lead
process to exit and start listening on monitor socket. So users treat
parent process exit as sync point to connect to QEMU's monitor.
That however doesn't work when --preconfig options is used, since it
provides monitor before completing daemonization and expects user to
issue exit-preconfig command when additional configuration via monitor
is finished. We also can't move completing daemonization before
preconfig monitor becomes available, since that would imply:
* partially loosing ability to configure QEMU instance in --preconfig
mode since QEMU might drop privileges, chroot and do other things
when daemonization is completed
* lead to loss of error messages in case they would happen after
daemonization
Be proactive now and make options mutually exclusive, so users would
get clear error message instead of waiting for lead process exit
indefinitely before connecting to monitor.
PS:
In case someone would come up with usecase where both options should
be enabled at the same time we could drop this restriction as far
as daemonization point is left where it is now (os_setup_post).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1529501059-163139-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
checkpatch reminds us that statics shouldn't be zero-initialized:
ERROR: do not initialise statics to 0 or NULL
#35: FILE: vl.c:157:
+static int num_serial_hds = 0;
ERROR: do not initialise statics to 0 or NULL
#36: FILE: vl.c:158:
+static Chardev **serial_hds = NULL;
I forgot to fix this in 6af2692e86f9fdfb3d; do so now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180426140253.3918-1-peter.maydell@linaro.org
Before this patch, monitor fd helpers might be called even earlier than
monitor_init_globals(). This can be problematic.
After previous work, now monitor_init_globals() does not depend on
accelerator initialization any more. Call it earlier (before CLI
parsing; that's where the monitor APIs might be called) to make sure it
is called before any of the monitor APIs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180608035511.7439-7-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
After 047f7038f5 it is possible for event loop to run two
times. First time whilst parsing command line options (the idea
is to bring up monitor early so that management applications can
tweak config before machine is initialized). And the second time
is after everything is set up (this is the usual place). In both
cases the event loop is called as main_loop_wait(nonblocking =
false) which causes the event loop to block until at least one
event occurred.
Now, consider that somebody (i.e. libvirt) calls us with
-daemonize. This operation is split in two steps. The main()
calls os_daemonize() which fork()-s and then waits in read()
until child notifies it via write():
/qemu.git $ ./x86_64-softmmu/qemu-system-x86_64 -S -daemonize \
-no-user-config -nodefaults -nographic
main(): child:
os_daemonize():
read(pipe[0])
main_loop():
main_loop_wait(false)
os_setup_post():
write(pipe[1])
main_loop():
main_loop_wait(false)
Here it can be clearly seen that main() does not exit until an
event occurs, but at the same time nobody will touch the monitor
socket until their exec("qemu-system-*") finishes. So the whole
thing deadlocks.
The solution is to not call main_loop_wait() unless --preconfig was
specified (in which case caller knows they must connect to the
socket before exec() finishes).
Patch also fixes hang when -nodefaults option is used, which were
causing QEMU hang in the early main_loop_wait() indefinitely by
the same means (not calling main_loop_wait() unless --preconfig
is present on CLI)
Based on
From: Michal Privoznik <mprivozn@redhat.com>
Subject: [PATCH] cli: Don't run early event loop if no --preconfig was specified
Message-Id: <ad910973c593c5ac2fed3a10ea958f7e9c12f82c.1527935663.git.mprivozn@redhat.com>
Fixes: 047f7038f5
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1528207243-268226-2-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is only ignored since QEMU version 1.7.0. Let's mark
it as deprecated, so that we can finally completely remove it soon.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1526990298-17924-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If CONFIG_SECCOMP is undefined, the option 'elevatedprivileges' remains
compiled. This would make libvirt set the corresponding capability and
then trigger failure during guest startup. This patch moves the code
regarding seccomp command line options to qemu-seccomp.c file and
wraps qemu_opts_foreach finding sandbox option with CONFIG_SECCOMP.
Because parse_sandbox() is moved into qemu-seccomp.c file, change
seccomp_start() to static function.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
If CONFIG_SECCOMP is undefined, the option 'elevateprivileges' remains
compiled. This would make libvirt set the corresponding capability and
then trigger failure during guest startup. This patch moves the code
regarding seccomp command line options to qemu-seccomp.c file and
wraps qemu_opts_foreach finding sandbox option with CONFIG_SECCOMP.
Because parse_sandbox() is moved into qemu-seccomp.c file, change
seccomp_start() to static function.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Message-Id: <20180531032937.1925-1-zyimin@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine jumps
into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and additionally
configure it using previous query results within one QEMU instance
(i.e. eliminate the need to start QEMU twice, 1st to query board specific
parameters and 2nd for actual VM start using query results for
additional parameters).
The new option complements -S option and could be used with or without
it. The difference is that -S pauses QEMU when the machine is completely
initialized with all devices wired up and ready to execute guest code
(QEMU needs only to unpause VCPUs to let guest execute its code),
while the "preconfig" option pauses QEMU early before board specific init
callback (machine_run_board_init) is executed and allows the configuration
of machine parameters which will be used by board init code.
When early introspection/configuration is done, command 'exit-preconfig'
should be used to exit RUN_STATE_PRECONFIG and transition to the next
requested state (i.e. if -S is used then QEMU will pause the second
time when board/device initialization is completed or start guest
execution if -S isn't provided on CLI)
PS:
Initially 'preconfig' is planned to be used for configuring numa
topology depending on board specified possible cpus layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that we cancel all jobs and not only block jobs on shutdown, doing
that in bdrv_close_all() isn't really appropriate any more. Move the
job_cancel_sync_all() call to the callers, and only assert that there
are no job running in bdrv_close_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After 1217d6ca2b we error out
explicitly if an unknown -option was passed on the command line.
However, we are doing two pass command line option parsing. In
the first pass we just look for -no-user-config or -nodefconfig
being present which determines whether we load user config or
not. Then in the second pass we finally parse everything else
throwing an error if an unsupported -option was found. Problem is
that in the second pass -no-user-config and -nodefconfig are not
handled explicitly which makes us throw the unsupported option
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add comments to the cases not (yet) switched
over to parse_display_qapi().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507095539.19584-5-kraxel@redhat.com
Drop the gtk option parser from parse_display(), so parse_display_qapi()
will handle it instead.
With this change the parser will accept gl=core and gl=es too, gtk
must catch the unsupported gles variant now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507095539.19584-4-kraxel@redhat.com
Drop the option-less display types (egl-headless, curses, none) from
parse_display(), so they'll be handled by parse_display_qapi().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180507095539.19584-3-kraxel@redhat.com
Add parse_display_qapi() function which parses the -display command line
using a qapi visitor for DisplayOptions. Wire up as default catch in
parse_display().
Improves the error message for unknown display types.
Also enables json as -display argument, i.e. -display "{ 'type': 'gtk' }"
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180507095539.19584-2-kraxel@redhat.com
We've never documented this option in our qemu-doc, so apart from the users
that already used the old qemu-kvm fork before, most users should not be
aware of this option at all. It's been marked as deprecated in the source
code for a long time already, and officially marked as deprecated in the
documentation since QEMU v2.10, so it should be fine to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deprecated since the beginning when it was added for compatibility with
the ancient qemu-kvm fork of QEMU, and it even printed out the deprecation
warning since right from the start (i.e. QEMU v1.3.0), so it's really time
to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dangling remainder of the -tdf option revealed a deficiency in our
option parsing: Options that have been declared, but are not supported
in the switch-case statement in vl.c and not handled in the OS-specifc
os_parse_cmd_args() functions are currently silently ignored. We should
rather tell the users that they specified something that we can not
handle, so let's print an error message and exit instead.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu-doc already states that this option is only maintained for
backward compatibility and "-device virtconsole" should be used
instead. So let's take the next step and mark this option officially
as deprecated.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525446790-16139-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will be able to have memory devices (e.g. virtio) not requiring the
slot parameter (e.g. not exposed via ACPI). We still need the maxmem
parameter to setup a proper memory region for device memory. And some
architectures (e.g. s390x) will have to set up the maximum possible guest
address space size based on the maxmem parameter.
As far as I can see, all code (pc.c,spapr.c,ACPI code) should handle
!slots just fine, even though maxmem is set.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-12-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The consoles ("sclpconsole" and "sclplmconsole") can only be configured
with "-device" and "-chardev" so far. Other machines use the convenience
option "-serial" to configure the default consoles, even for virtual
consoles like spapr-vty on the pseries machine. So let's support this
option on s390x, too. This way we can easily enable the serial console
here again with "-nodefaults", for example:
qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio
... which is way shorter than typing:
qemu-system-s390x -no-shutdown -nographic -nodefaults \
-chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \
-mon chardev=c1
The -serial parameter can also be used if you only want to see the QEMU
monitor on stdio without using -nodefaults, but not the console output.
That's something that is pretty impossible with the current code today:
qemu-system-s390x -no-shutdown -nographic -serial none
While we're at it, this patch also maps the second -serial option to the
"sclplmconsole", so that there is now an easy way to configure this second
console on s390x, too, for example:
qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio
Additionally, the new code is also smaller than the old one and we have
less s390x-specific code in vl.c :-)
I've also checked that migration still works as expected by migrating
a guest with console output back and forth between a qemu-system-s390x
that has this patch and an instance without this patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
v2: Rebase on top of master
v3: Fix the json format (Eric Blake)
Fix a comparison issue (Gerd Hoffmann)
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Message-id: 20180413135842.21325-2-tournier.elie@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is called just before os_setup_post. Currently none of the
accelerators provide this hook, but the Xen one is going to provide
one in a moment.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Create a new function serial_max_hds() which returns the number of
serial ports defined by the user. This is needed only by spapr.
This allows us to remove the MAX_SERIAL_PORTS define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-14-peter.maydell@linaro.org
Instead of having a fixed sized global serial_hds[] array,
use a local dynamically reallocated one, so we don't have
a compile time limit on how many serial ports a system has.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-13-peter.maydell@linaro.org
Provide an accessor function serial_hd() to return the Chardev
(if any) associated with the numbered serial port. This will
be used to replace direct accesses to the serial_hds[] array,
so that calling code doesn't need to care about the size of
that array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-7-peter.maydell@linaro.org
