macOS versions older than 12.0 are no longer supported.
docs/about/build-platforms.rst says:
> Support for the previous major version will be dropped 2 years after
> the new major version is released or when the vendor itself drops
> support, whichever comes first.
macOS 12.0 was released 2021:
https://www.apple.com/newsroom/2021/10/macos-monterey-is-now-available/
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240629-macos-v1-3-6e70a6b700a0@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
bdrv_file_open and bdrv_open are completely equivalent, they are
never checked except to see which one to invoke. So merge them
into a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libaio defines IO_CMD_FDSYNC command to sync all outstanding
asynchronous I/O operations, by flushing out file data to the
disk storage. Enable linux-aio to submit such aio request.
When using aio=native without fdsync() support, QEMU creates
pthreads, and destroying these pthreads results in TLB flushes.
In a real-time guest environment, TLB flushes cause a latency
spike. This patch helps to avoid such spikes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240425070412.37248-1-ppandit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 72373e40fb, this parameter is always passed as 'false'
from the caller.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-ID: <20240430170213.148558-1-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The file-posix block driver currently only sets up Linux AIO and
io_uring in the BDS's AioContext. In the multi-queue block layer we must
be able to submit I/O requests in AioContexts that do not have Linux AIO
and io_uring set up yet since any thread can call into the block driver.
Set up Linux AIO and io_uring for the current AioContext during request
submission. We lose the ability to return an error from
.bdrv_file_open() when Linux AIO and io_uring setup fails (e.g. due to
resource limits). Instead the user only gets warnings and we fall back
to aio=threads. This is still better than a fatal error after startup.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230914140101.1065008-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_co_zone_append() sets "s->offset" where "BDRVRawState *s". This pointer
is used later at raw_co_prw() to save the block address where the data is
written.
When multiple IOs are on-going at the same time, a later IO's
raw_co_zone_append() call over-writes a former IO's offset address before
raw_co_prw() completes. As a result, the former zone append IO returns the
initial value (= the start address of the writing zone), instead of the
proper address.
Fix the issue by passing the offset pointer to raw_co_prw() instead of
passing it through s->offset. Also, remove "offset" from BDRVRawState as
there is no usage anymore.
Fixes: 4751d09adc ("block: introduce zone append write for zoned devices")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Message-Id: <20231030073853.2601162-1-naohiro.aota@wdc.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
When the zoned request fail, it needs to update only the wp of
the target zones for not disrupting the in-flight writes on
these other zones. The wp is updated successfully after the
request completes.
Fixed the callers with right offset and nr_zones.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-Id: <20230825040556.4217-1-faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[hreitz: Rebased and fixed comment spelling]
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
- Fix for file-posix's zoning code crashing on I/O errors
- Throttling refactoring
-----BEGIN PGP SIGNATURE-----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=oKgk
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2023-09-01' of https://gitlab.com/hreitz/qemu into staging
Block patches
- Fix for file-posix's zoning code crashing on I/O errors
- Throttling refactoring
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmTxnMISHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfYkUP+gMG9hhzvgjj/tw9rEBQjciihzcQmqQJ
# 2Mm37RH2jj5bnnTdaTbMkcRRwVhncYSCwK9q5EYVbZmU9C/v4YJmsSEQlcl7wVou
# hbPUv6NHaBrJZX9nxNSa2RHui6pZMLKa/D0rJVB7NjYBrrRtiPo7kiLVQYjYXa2g
# kcCCfY4t3Z2RxOP31mMXRjYlhJE9bIuZdTEndrKme8KS2JGPZEJ9xjkoW1tj96EX
# oc/Cg2vk7AEtsFYA0bcD8fTFkBDJEwyYl3usu7Tk24pvH16jk7wFSqRVSsDMfnER
# tG8X3mHLIY0hbSkpzdHJdXINvZ6FWpQb0CGzIKr+pMiuWVdWr1HglBr0m4pVF+Y4
# A6AI6VX2JJgtacypoDyCZC9mzs1jIdeiwq9v5dyuikJ6ivTwEEoeoSLnLTN3AjXn
# 0mtQYzgCg5Gd6+rTo7XjSO9SSlbaVrDl/B2eXle6tmIFT5k+86fh0hc+zTmP8Rkw
# Knbc+5Le95wlMrOUNx2GhXrTGwX510hLxKboho/LITxtAzqvXnEJKrYbnkm3WPnw
# wfHnR5VQH1NKEpiH/p33og6OV/vu9e7vgp0ZNZV136SnzC90C1zMUwg2simJW701
# 34EtN0XBX8XBKrxfe7KscV9kRE8wrWWJVbhp+WOcQEomGI8uraxzWqDIk/v7NZXv
# m4XBscaB+Iri
# =oKgk
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Sep 2023 04:11:46 EDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2023-09-01' of https://gitlab.com/hreitz/qemu:
tests/file-io-error: New test
file-posix: Simplify raw_co_prw's 'out' zone code
file-posix: Fix zone update in I/O error path
file-posix: Check bs->bl.zoned for zone info
file-posix: Clear bs->bl.zoned on error
block/throttle-groups: Use ThrottleDirection instread of bool is_write
fsdev: Use ThrottleDirection instread of bool is_write
throttle: use THROTTLE_MAX/ARRAY_SIZE for hard code
throttle: use enum ThrottleDirection instead of bool is_write
cryptodev: use NULL throttle timer cb for read direction
test-throttle: test read only and write only
throttle: support read-only and write-only
test-throttle: use enum ThrottleDirection
throttle: introduce enum ThrottleDirection
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We duplicate the same condition three times here, pull it out to the top
level.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-5-hreitz@redhat.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
We must check that zone information is present before running
update_zones_wp().
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2234374
Fixes: Coverity CID 1512459
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-4-hreitz@redhat.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
Instead of checking bs->wps or bs->bl.zone_size for whether zone
information is present, check bs->bl.zoned. That is the flag that
raw_refresh_zoned_limits() reliably sets to indicate zone support. If
it is set to something other than BLK_Z_NONE, other values and objects
like bs->wps and bs->bl.zone_size must be non-null/zero and valid; if it
is not, we cannot rely on their validity.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-3-hreitz@redhat.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
bs->bl.zoned is what indicates whether the zone information is present
and valid; it is the only thing that raw_refresh_zoned_limits() sets if
CONFIG_BLKZONED is not defined, and it is also the only thing that it
sets if CONFIG_BLKZONED is defined, but there are no zones.
Make sure that it is always set to BLK_Z_NONE if there is an error
anywhere in raw_refresh_zoned_limits() so that we do not accidentally
announce zones while our information is incomplete or invalid.
This also fixes a memory leak in the last error path in
raw_refresh_zoned_limits().
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-2-hreitz@redhat.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
The g_file_get_contents() function returns a g_boolean. If it fails, the
returned value will be 0 instead of -1. Solve the issue by skipping
assigning ret value.
This issue was found by Matthew Rosato using virtio-blk-{pci,ccw} backed
by an NVMe partition e.g. /dev/nvme0n1p1 on s390x.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230727115844.8480-1-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
raw_co_getlength is called by handle_aiocb_write_zeroes, which is not a coroutine
function. This is harmless because raw_co_getlength does not actually suspend,
but in the interest of clarity make it a non-coroutine_fn that is just wrapped
by the coroutine_fn raw_co_getlength. Likewise, check_cache_dropped was only
a coroutine_fn because it called raw_co_getlength, so it can be made non-coroutine
as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-2-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.
Note that a dev_max_batch check is dropped in laio_io_unplug() because
the semantics of unplug_fn() are different from .bdrv_co_unplug():
1. unplug_fn() is only called when the last blk_io_unplug() call occurs,
not every time blk_io_unplug() is called.
2. unplug_fn() is per-thread, not per-BlockDriverState, so there is no
way to get per-BlockDriverState fields like dev_max_batch.
Therefore this condition cannot be moved to laio_unplug_fn(). It is not
obvious that this condition affects performance in practice, so I am
removing it instead of trying to come up with a more complex mechanism
to preserve the condition.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230530180959.1108766-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-5-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A zone append command is a write operation that specifies the first
logical block of a zone as the write position. When writing to a zoned
block device using zone append, the byte offset of the call may point at
any position within the zone to which the data is being appended. Upon
completion the device will respond with the position where the data has
been written in the zone.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since Linux doesn't have a user API to issue zone append operations to
zoned devices from user space, the file-posix driver is modified to add
zone append emulation using regular writes. To do this, the file-posix
driver tracks the wp location of all zones of the device. It uses an
array of uint64_t. The most significant bit of each wp location indicates
if the zone type is conventional zones.
The zones wp can be changed due to the following operations issued:
- zone reset: change the wp to the start offset of that zone
- zone finish: change to the end location of that zone
- write to a zone
- zone append
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051510.177850-2-faithilikerun@gmail.com
[Fix errno propagation from handle_aiocb_zone_mgmt()
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-8-faithilikerun@gmail.com
Message-id: 20230324090605.28361-8-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Putting zoned/non-zoned BlockDrivers on top of each other is not
allowed.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-6-faithilikerun@gmail.com
Message-id: 20230324090605.28361-6-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and clarify that the check is about zoned
BlockDrivers.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use get_sysfs_str_val() to get the string value of device
zoned model. Then get_sysfs_zoned_model() can convert it to
BlockZoneModel type of QEMU.
Use get_sysfs_long_val() to get the long value of zoned device
information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-3-faithilikerun@gmail.com
Message-id: 20230324090605.28361-3-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_get_current_aio_context() where possible, since we always
submit work to the current thread anyways.
We want to also be sure that the thread submitting the work is
the same as the one processing the pool, to avoid adding
synchronization to the pool list.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-4-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LuringState.
In order to prevent mistakes from the caller side, avoid passing LuringState
in luring_io_{plug/unplug} and luring_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-3-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LinuxAioState.
In order to prevent mistakes from the caller side, avoid passing LinuxAioState
in laio_io_{plug/unplug} and laio_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-2-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fill in the field in BlockLimits directly for host devices, and
copy it from there for the raw format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-5-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_create() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_copy_range() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_flush() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When calling bdrv_getlength() in handle_aiocb_write_zeroes(), the
function creates a new coroutine and then waits that it finishes using
AIO_WAIT_WHILE.
The problem is that this function could also run in a worker thread,
that has a different AioContext from main loop and iothreads, therefore
in AIO_WAIT_WHILE we will have in_aio_context_home_thread(ctx) == false
and therefore
assert(qemu_get_current_aio_context() == qemu_get_aio_context());
in the else branch will fail, crashing QEMU.
Aside from that, bdrv_getlength() is wrong also conceptually, because
it reads the BDS graph from another thread and is not protected by
any lock.
Replace it with raw_co_getlength, that doesn't create a coroutine and
doesn't read the BDS graph.
Reported-by: Ninad Palsule <ninad@linux.vnet.ibm.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230209154522.1164401-1-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add some (optional) information that the file driver can provide for
image files, namely the extent size hint.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-3-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_lock_medium() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
The only caller of this function is blk_lock_medium(). Therefore make
blk_lock_medium() a co_wrapper, so that it always creates a new
coroutine, and then make bdrv_lock_medium() a coroutine_fn where the
lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_eject() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
The only caller of this function is blk_eject(). Therefore make
blk_eject() a co_wrapper, so that it always creates a new coroutine, and
then make bdrv_eject() coroutine_fn where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_info() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_allocated_file_size() is categorized as an I/O function, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since it traverses the block nodes graph, which however is only
possible in a coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_getlength is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Because now this function creates a new coroutine and polls, we need to
take the AioContext lock where it is missing, for the only reason that
internally co_wrapper calls AIO_WAIT_WHILE and it expects to release the
AioContext lock.
This is especially messy when a co_wrapper creates a coroutine and polls
in bdrv_open_driver, because this function has so many callers in so
many context that it can easily lead to deadlocks. Therefore the new
rule for bdrv_open_driver is that the caller must always hold the
AioContext lock of the given bs (except if it is a coroutine), because
the function calls bdrv_refresh_total_sectors() which is now a
co_wrapper.
Once the rwlock is ultimated and placed in every place it needs to be,
we will poll using AIO_WAIT_WHILE_UNLOCKED and remove the AioContext
lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_inserted() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
At the same time, add also blk_is_inserted as co_wrapper_mixed, since it
is called in both coroutine and non-coroutine contexts.
Because now this function creates a new coroutine and polls, we need to
take the AioContext lock where it is missing, for the only reason that
internally c_w_mixed_bdrv_rdlock calls AIO_WAIT_WHILE and it expects to
release the AioContext lock. Once the rwlock is ultimated and placed in
every place it needs to be, we will poll using AIO_WAIT_WHILE_UNLOCKED
and remove the AioContext lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_io_unplug is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
The only caller of this function is blk_io_unplug(), therefore make
blk_io_unplug() a co_wrapper, so that we're always running in a
coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_io_plug is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
The only caller of this function is blk_io_plug(), therefore make
blk_io_plug() a co_wrapper, so that we're always running in a coroutine
where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit d7e2fe4aac.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
There is a defined RETRY_ON_EINTR() macro in qemu/osdep.h
which handles the same while loop.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/415
Signed-off-by: Nikita Ivanov <nivanov@cloudlinux.com>
Message-Id: <20221023090422.242617-3-nivanov@cloudlinux.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[thuth: Dropped the hunk that changed socket_accept() in libqtest.c]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Block drivers may optimize I/O requests accessing buffers previously
registered with bdrv_register_buf(). Checking whether all elements of a
request's QEMUIOVector are within previously registered buffers is
expensive, so we need a hint from the user to avoid costly checks.
Add a BDRV_REQ_REGISTERED_BUF request flag to indicate that all
QEMUIOVector elements in an I/O request are known to be within
previously registered buffers.
Always pass the flag through to driver read/write functions. There is
little harm in passing the flag to a driver that does not use it.
Passing the flag to drivers avoids changes across many block drivers.
Filter drivers would need to explicitly support the flag and pass
through to their children when the children support it. That's a lot of
code changes and it's hard to remember to do that everywhere, leading to
silent reduced performance when the flag is accidentally dropped.
The only problematic scenario with the approach in this patch is when a
driver passes the flag through to internal I/O requests that don't use
the same I/O buffer. In that case the hint may be set when it should
actually be clear. This is a rare case though so the risk is low.
Some drivers have assert(!flags), which no longer works when
BDRV_REQ_REGISTERED_BUF is passed in. These assertions aren't very
useful anyway since the functions are called almost exclusively by
bdrv_driver_preadv/pwritev() so if we get flags handling right there
then the assertion is not needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The field is unused (only ever set, but never read) since commit
ac9185603. Additionally, the commit message of commit 34fa110e already
explained earlier why it's unreliable. Remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220923142838.91043-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Callers of coroutine_fn must be coroutine_fn themselves, or the call
must be within "if (qemu_in_coroutine())". Apply coroutine_fn to
functions where this holds.
Reviewed-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An iov length needs to be aligned to the logical block size, which may
be larger than the memory alignment.
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20220929200523.3218710-3-kbusch@meta.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is only user of bdrv_qiov_is_aligned(), so move the alignment
function to there and make it static.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20220929200523.3218710-2-kbusch@meta.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
