For now, it has no effect. It will be used in dump detach support.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-5-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of malloc/free each time for DumpState, make it
static. Added DumpStatus to show status for dump.
This is to be used for detached dump.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-4-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch only adds the interfaces, but does not implement them.
"detach" parameter is made optional, to make sure that all the old
dump-guest-memory requests will still be able to work.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It might be a little bit confusing and error prone to do
dump_cleanup() in these two functions. A better way is to do
dump_cleanup() before dump finish, no matter whether dump has
succeeded or not.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They seem to have snuck in when applying Janosch Frank
<frankja@linux.vnet.ibm.com>'s previous patch.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455848416-13177-1-git-send-email-famz@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Tested-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=1sMO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 22 Feb 2016 15:59:25 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (34 commits)
qemu-iotests: 140: make description slightly more verbose
qemu-iotests: 140: don't use IDE device
qemu-iotests: 067: ignore QMP events
blockdev: unset inappropriate flags when changing medium
MAINTAINERS: Add myself as maintainer of the throttling code
docs: Document the throttling infrastructure
qapi: Correct the name of the iops_rd parameter
qemu-iotests: Extend iotest 093 to test bursts
throttle: Test throttle_compute_wait() during bursts
throttle: Check that burst_level leaks correctly
qapi: Add burst length fields to BlockDeviceInfo
qapi: Add burst length parameters to block_set_io_throttle
throttle: Add command-line settings to define the burst periods
throttle: Add support for burst periods
throttle: Use throttle_config_init() to initialize ThrottleConfig
throttle: Merge all functions that check the configuration into one
throttle: Set always an average value when setting a maximum value
throttle: Make throttle_is_valid() set errp
throttle: Make throttle_max_is_missing_limit() set errp
throttle: Make throttle_conflicting() set errp
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWyy91AAoJEDuxQgLoOKytfvoH/266teXkX9+Ulx3hV4UR/rgC
t1jNcpLqDcTISfW6YcjMMI5jFehTcekpaJvYOTvU6bm3eyPVjQI0JnCMB37WA2ey
kZlqwXx6TYjHbGQBzG9noNjJCSke2Pn7qS/D2sliQOXJasSG2e4WOJ7tql+fSxdV
ivPKVLG+kFyxHFbw1DwJ2njapJd50NkiWftl23+TqP05FExaN0Mt09LlfPmZ7I0f
H1ayqgiRpRuFGOU6Fnn4ho93U+osutyxf2ONVWQT2unY66OEXxYX1C3UJiFyaIIG
PGSj/xCd2Y5KpqrHFsAFIjUrOtEKRLp5SEotx4J4g/SH3GR/4/rQ1R4qZbMXSyg=
=9CzK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-02-22' into queue-block
Block patches of the last three weeks.
# gpg: Signature made Mon Feb 22 16:55:33 2016 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-02-22:
qemu-iotests: 140: make description slightly more verbose
qemu-iotests: 140: don't use IDE device
qemu-iotests: 067: ignore QMP events
blockdev: unset inappropriate flags when changing medium
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Describe in a little more detail what the test is supposed to achieve.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-3-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
IDE is only implemented by very few architectures (mostly PC). The
test doesn't actually need a block device attached to the
BlockBackend, so just drop it and adjust the reference output
accordingly.
Fixes: 16dee418 ("iotests: Add test for eject under NBD server")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The relative ordering of "device_del" return value and the
"DEVICE_DELETED" QMP event depends on the architecture being
tested. On x86 unplugging virtio disks is asynchronous
(=qdev_unplug()= → =hotplug_handler_unplug_request()=) while on s390x
it is synchronous (=qdev_unplug()= → =hotplug_handler_unplug()=). This
leads to the actual output on s390x consistently differing from the
reference output (that was probably produced on x86).
The easiest way to address this is to filter out QMP events in
067. The DEVICE_DELETED event is already getting explicitly tested by
the Python-based test case 139, so the test coverage should be
unaffected. Make use of the recently introduced _filter_qmp_events()
to remove QMP events from the test case output and adjust the
reference output accordingly.
The tr / sed / tr trick used for filtering was suggested by Max Reitz
<mreitz@redhat.com>.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455886869-139916-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Most importantly, this removes BDRV_O_TEMPORARY, to avoid unlink()ing an
image which replaces a snapshotted one.
Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org>
Message-id: 20160206133618.GA16635@li141-249.members.linode.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a new test that checks that the burst settings
('iops_max', 'iops_max_length', etc.) of the throttling code work as
expected.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test simulates an I/O burst for more than two seconds and checks
that it works as expected.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch expands test_leak_bucket() to check that burst_level leaks
correctly.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the new bps_*_max_length and iops_*_max_length
parameters to the BlockDeviceInfo struct.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the new bps_*_max_length and iops_*_max_length
parameters to the block_set_io_throttle command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds all the throttling.*-max-length command-line
parameters to define the length of the burst periods.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds support for burst periods to the throttling code.
With this feature the user can keep performing bursts as defined by
the LeakyBucket.max rate for a configurable period of time.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can currently initialize ThrottleConfig by zeroing all its fields,
but this will change with the new fields to define the length of the
burst periods.
This patch introduces a new throttle_config_init() function and uses it
to replace all memset() calls that initialize ThrottleConfig directly.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's no need to keep throttle_conflicting(), throttle_is_valid()
and throttle_max_is_missing_limit() as separate functions, so this
patch merges all three into one.
As a consequence, check_throttle_config() becomes redundant and can be
replaced with throttle_is_valid().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When testing the ranges of valid values, set_cfg_value() creates
sometimes invalid throttling configurations by setting bucket.max
while leaving bucket.avg uninitialized.
While this doesn't break the current tests, it will as soon as
we unify all functions that check the validity of the throttling
configuration.
This patch ensures that the value of bucket.avg is valid when setting
bucket.max.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The caller does not need to set it, and this will allow us to refactor
this function later.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The caller does not need to set it, and this will allow us to refactor
this function later.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The caller does not need to set it, and this will allow us to refactor
this function later.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is only used internally in throttle.c
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using 'migrate -b', we must make sure to take ownership of the
image before writing to it. Otherwise metadata would be thrown away on
migration completion; this was caught by the assertions introduced in
commit 09e0c771.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When declaring the 'struct option' array, use the standard
constants no_argument/required_argument, instead of magic
values 0 and 1.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When declaring the 'struct option' array, use the standard
constants no_argument/required_argument, instead of magic
values 0 and 1.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When defining values for long options, the normal practice is
to start numbering from 256, to avoid overlap with the range
of valid values for short options.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu-img allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg
qemu-img info https://127.0.0.1/images/centos7.iso
This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.
qemu-img info --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
This flag is mutually exclusive with the '-f' / '-F' flags.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu-nbd allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg
qemu-nbd https://127.0.0.1/images/centos7.iso
qemu-nbd /home/berrange/demo.qcow2
This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.
qemu-nbd --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
qemu-nbd --image-opts driver=file,filename=/home/berrange/demo.qcow2
This flag is mutually exclusive with the '-f' flag.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu-io allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg
qemu-io https://127.0.0.1/images/centos7.iso
qemu-io /home/berrange/demo.qcow2
By contrast when using the interactive shell, it is possible to
use --option with the 'open' command, or to omit the filename.
This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.
qemu-io --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
qemu-io --image-opts driver=qcow2,file.filename=/home/berrange/demo.qcow2
This flag is mutually exclusive with the '-f' flag and with
the '-o' flag to the 'open' command
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow creation of user creatable object types with qemu-img
via a new --object command line arg. This will be used to supply
passwords and/or encryption keys to the various block driver
backends via the recently added 'secret' object type.
# printf letmein > mypasswd.txt
# qemu-img info --object secret,id=sec0,file=mypasswd.txt \
...other info args...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow creation of user creatable object types with qemu-io
via a new --object command line arg. This will be used to supply
passwords and/or encryption keys to the various block driver
backends via the recently added 'secret' object type.
# printf letmein > mypasswd.txt
# qemu-io --object secret,id=sec0,file=mypasswd.txt \
...other args...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BDRV_O_INACTIVE flag should only be set for images explicitly opened
by the user. snapshot=on needs to create a new qcow2 image and write
some metadata to it. This is not a problem because it can't come from
the source, so there's no reason to mark it as BDRV_O_INACTIVE, even
though it is opened while waiting for the migration to complete.
This fixes an assertion failure when -incoming and snapshot=on are
combined.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new feature for qcow2: storing bitmaps.
This patch adds new header extension to qcow2 - Bitmaps Extension. It
provides an ability to store virtual disk related bitmaps in a qcow2
image. For now there is only one type of such bitmaps: Dirty Tracking
Bitmap, which just tracks virtual disk changes from some moment.
Note: Only bitmaps, relative to the virtual disk, stored in qcow2 file,
should be stored in this qcow2 file. The size of each bitmap
(considering its granularity) is equal to virtual disk size.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 16b0d555 introduced an issue where we are not initializing
has_filename for the 'next' MapEntry object, which leads to interesting
errors in both Valgrind and Clang -fsanitize=undefined.
Zero the stack object at allocation AND make sure the utility to
populate the fields properly marks has_filename as false if applicable.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only the echo field is used in the temporary VirtualConsole, so the
damage was limited. But still, if echo was incorrectly set to true,
the result would be some puzzling output in VTE monitor and serial
consoles.
Fixes: fba958c692
Cc: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1455015557-15106-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current documentation of chardev mux=on is rather brief and opaque;
expand it to hopefully be a bit more helpful.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1455643738-6068-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* update MAINTAINERS with a section for softfloat
* drop all the uses of int_fast*_t types
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bjQ9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-softfloat-20160219' into staging
softfloat queue:
* update MAINTAINERS with a section for softfloat
* drop all the uses of int_fast*_t types
# gpg: Signature made Fri 19 Feb 2016 16:34:35 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-softfloat-20160219:
MAINTAINERS: Add section for FPU emulation
osdep.h: Remove int_fast*_t Solaris compatibility code
fpu: Use plain 'int' rather than 'int_fast16_t' for exponents
fpu: Use plain 'int' rather than 'int_fast16_t' for shift counts
fpu: Remove use of int_fast16_t in conversions to int16
target-mips: Stop using uint_fast*_t types in r4k_tlb_t struct
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even PCI_CAP_FLAGS has the same value as PCI_MSIX_FLAGS, the later one is
the more proper on retrieving MSIX entries.
This patch uses PCI_MSIX_FLAGS to retrieve the MSIX entries.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
qemu_fdt_setprop asserts in case of error hence no need to check
the returned value.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch allows the instantiation of the vfio-amd-xgbe device
from the QEMU command line (-device vfio-amd-xgbe,host="<device>").
The guest is exposed with a device tree node that combines the description
of both XGBE and PHY (representation supported from 4.2 onwards kernel):
Documentation/devicetree/bindings/net/amd-xgbe.txt.
There are 5 register regions, 6 interrupts including 4 optional
edge-sensitive per-channel interrupts.
Some property values are inherited from host device tree. Host device tree
must feature a combined XGBE/PHY representation (>= 4.2 host kernel).
2 clock nodes (dma and ptp) also are created. It is checked those clocks
are fixed on host side.
AMD XGBE node creation function has a dependency on vfio Linux header and
more generally node creation function for VFIO platform devices only make
sense with CONFIG_LINUX so let's protect this code with #ifdef CONFIG_LINUX.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
