Provides a blocking call to read a character from the console using
semihosting.chardev, if specified. This takes some careful command
line options to use stdio successfully as the serial ports, monitor
and semihost all want to use stdio. Here's a sample set of command
line options which share stdio between semihost, monitor and serial
ports:
qemu \
-chardev stdio,mux=on,id=stdio0 \
-serial chardev:stdio0 \
-semihosting-config enable=on,chardev=stdio0 \
-mon chardev=stdio0,mode=readline
This creates a chardev hooked to stdio and then connects all of the
subsystems to it. A shorter mechanism would be good to hear about.
Signed-off-by: Keith Packard <keithp@keithp.com>
Message-Id: <20191104204230.12249-1-keithp@keithp.com>
[AJB: fixed up deadlock, minor commit title reword]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Before we introduce blocking semihosting calls we need to ensure we
can restart the system on semi hosting exception. To be able to do
this the EXCP_SEMIHOST operation should be idempotent until it finally
completes. Practically this means ensureing we only update the pc
after the semihosting call has completed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Convert the final bit of DEBUG_MMAP to a tracepoint and remove the
last remanents of the #ifdef hackery.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-6-alex.bennee@linaro.org>
The CPU_LOG_PAGE flag is woefully underused and could stand to do
extra duty tracking page changes. If the user doesn't want to see the
details as things change they still have the tracepoints available.
We push the locking into log_page_dump and pass a reason for the
banner text.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-5-alex.bennee@linaro.org>
For full details we also want to see where the mmaps end up.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-4-alex.bennee@linaro.org>
It is a pain to re-compile when you need to debug and tracepoints are
a fairly low impact way to instrument QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-3-alex.bennee@linaro.org>
It is a pain to re-compile when you need to debug and tracepoints are
a fairly low impact way to instrument QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-2-alex.bennee@linaro.org>
The virtual timebase register (VTB) is a 64-bit register which
increments at the same rate as the timebase register, present on POWER8
and later processors.
The register is able to be read/written by the hypervisor and read by
the supervisor. All other accesses are illegal.
Currently the VTB is just an alias for the timebase (TB) register.
Implement the VTB so that is can be read/written independent of the TB.
Make use of the existing method for accessing timebase facilities where
by the compensation is stored and used to compute the value on reads/is
updated on writes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ARMv8.2 introduced support for Data Cache Clean instructions
to PoP (point-of-persistence) - DC CVAP and PoDP (point-of-deep-persistence)
- DV CVADP. Both specify conceptual points in a memory system where all writes
that are to reach them are considered persistent.
The support provided considers both to be actually the same so there is no
distinction between the two. If none is available (there is no backing store
for given memory) both will result in Data Cache Clean up to the point of
coherency. Otherwise sync for the specified range shall be performed.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191121000843.24844-5-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All timestamps were copied to atime instead of to their respective
fields.
Fixes: efa921845c ("linux-user: Add support for translation of statx() syscall")
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191122174040.569252-1-ariadne@dereferenced.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
stime() has been withdrawn from glibc
(12cbde1dae6f "Use clock_settime to implement stime; withdraw stime.")
Implement the target stime() syscall using host
clock_settime(CLOCK_REALTIME, ...) as it is done internally in glibc.
Tested qemu-ppc/x86_64 with:
#include <time.h>
#include <stdio.h>
int main(void)
{
time_t t;
int ret;
/* date -u -d"2019-11-12T15:11:00" "+%s" */
t = 1573571460;
ret = stime(&t);
printf("ret %d\n", ret);
return 0;
}
# date; ./stime; date
Tue Nov 12 14:18:32 UTC 2019
ret 0
Tue Nov 12 15:11:00 UTC 2019
Buglink: https://bugs.launchpad.net/qemu/+bug/1852115
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191112142556.6335-1-laurent@vivier.eu>
This value is not, as far as I know, used by any linux software,
but it is set by the kernel and is part of the ABI.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We failed to set the secondary return value in %o1
we failed to advance the PC past the syscall,
we failed to adjust regwptr into the new structure,
we stored the stack pointer into the wrong register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191106113318.10226-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use WREG_I0 not WREG_O0 in order to properly save the "ins".
The "outs" were saved separately in setup___siginfo.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191106113318.10226-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
s/UREG_FP/WREG_SP/g
This is non-obvious because the UREG_FP constant is fact wrong.
However, the previous search-and-replace patch made it clear that
UREG_FP expands to WREG_O6, and we can see from the enumeration in
target/sparc/cpu.h that WREG_O6 is in fact WREG_SP, the stack pointer.
The UREG_SP define is unused; remove it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is non-obvious because the UREG constants are in fact wrong.
s/UREG_I/WREG_O/g
s/UREG_O/WREG_I/g
s/UREG_L/WREG_L/g
These substitutions have identical integer values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This fixes a naming bug wherein we used "UREG_FP" to access the
stack pointer. OTOH, the "UREG_FP" constant was also defined
incorrectly such that it *did* reference the stack pointer.
Note that the kernel legitimately uses the name "FP", because it
utilizes the rolled stack window in processing the system call.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This change includes support for all AF_NETLINK socket options up to about
kernel version 5.4 (5.4 is not formally released at the time of writing).
Socket options that were introduced in kernel versions before the oldest
currently stable kernel version are guarded by kernel version macros.
This change has been built under gcc 8.3, and clang 9.0, and it passes
`make check`. The netlink options have been tested by emulating some
non-trival software that uses NETLINK socket options, but they have
not been exaustively verified.
Signed-off-by: Josh Kunz <jkz@google.com>
Message-Id: <20191029224310.164025-1-jkz@google.com>
[lv: updated patch according to CODING_STYLE]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To avoid too much duplication add a wrapper that the existing trace
and the new plugin calls can live in. We could move the -strace code
here as well but that is left for a future series as the code is
subtly different between the bsd and linux.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[AJB: wrap in syscall-trace.h, expand commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The CPU loop tagged all the queued signals as QEMU_SI_KILL while it was
filling the `_sigfault` part of `siginfo`: this caused QEMU to copy the
wrong fields over to the userspace program.
Make sure the fault address recorded by the MMU is is stored in the CPU
environment structure.
In case of memory faults store the exception address into `siginfo`.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-24-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-23-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Begin setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the format is not the syscall last argument, a comma is append.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191021114857.20538-9-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Extract common print_sockfd() from various socket related syscalls.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191021114857.20538-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In any of these `*_for_each_*` functions, the last entry in the buffer (so the
"remaining length in the buffer" `len` is equal to the length of the
entry `nlmsg_len`/`nla_len`/etc) has size that is not a multiple of the
alignment, the aligned lengths `*_ALIGN(*_len)` will be greater than `len`.
Since `len` is unsigned (`size_t`), it underflows and the loop will read
pass the buffer.
This may manifest as random EINVAL or EOPNOTSUPP error on IO or network
system calls.
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191018001920.178283-1-scw@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl2OHYsZHHBldGVyLm1h
eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3oHlD/4iD57WzVkf2EagPg61EbqV
KJU0bloj6lpfhI410zv6RLfSxRhuJKj1voBPl0wh/uWz4kIHBjcYZgRQGZz5+Fem
XE4j7bLfgXlbYkjl6CFo3oqZJM+iVmMofKVbpj7nEnO6cB9nW2O4Uk88vPTqCRUp
uip/ZveoQ3WvzyM8ERWiIiGZrvCRPnfTFvWGNEDd+ESx3ACmNbeAHilMURESkXR8
3iRt83bzL+H7xRpVEmLvUAbjJlf+4dzyftJSwTDquLsu+g4I45BDe1ki7ip9U06B
EvgNZ0TKchNI2kn6I4R0XAYAdZyKRONWqYTPE3xEtweihLwOKYsKfQViSHkhYxuE
upqMfsSzpT2ivqMb5myFU8JbG6jZZGTguAZ40MQT073gckgFoFfWjAtzR0fWa/Cy
VJ79fWIfOXrRsc76UDBeDuJ3CFEliFMSzDJWwglxlp9JX6ckfHH0Vwfmj9NPcuRw
AeAkI7Xh+emNKftJzNtC+6Ba7jMhMLLDBoe1r3NQYK1BFg/JRtkGCja3UAswotXH
hEYMicbMnkhOGEKxjKL0jbl33XKKAVq3pens2tT0QIz3Xqzh9iIcceCnv4MsddK9
MPU8yfQYcj6eNxVBLofhuRGURMK4BpQzj2Rxg03G3dRpFuNEwneUrx64q8lEv4Y5
EWSFxOoBPEpooiMCoboZ/A==
=/0m2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190927' into staging
target-arm queue:
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
# gpg: Signature made Fri 27 Sep 2019 15:32:43 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190927:
hw/arm/boot: Use the IEC binary prefix definitions
hw/arm/boot.c: Set NSACR.{CP11,CP10} for NS kernel boots
tests/tcg: add linux-user semihosting smoke test for ARM
target/arm: remove run-time semihosting checks for linux-user
target/arm: remove run time semihosting checks
target/arm: handle A-profile semihosting at translate time
target/arm: handle M-profile semihosting at translate time
tests/tcg: clean-up some comments after the de-tangling
target/arm: fix CBAR register for AArch64 CPUs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/tcg/arm/Makefile.target
Now we do all our checking at translate time we can make cpu_loop a
little bit simpler. We also introduce a simple linux-user semihosting
test case to defend the functionality. The out-of-tree softmmu based
semihosting tests are still more comprehensive.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-6-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly using the 64-bit AIX ABI instead of the 32-bit
SYSV ABI for setting NIP for the signal handler.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
FDFLUSH is used for flushing buffers of floppy drives. Support in
QEMU is needed because some of Debian packages use this ioctl while
running post-build tests. One such example is 'tar' package.
Signed-off-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1567601968-26946-5-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
FIOGETOWN and FIOSETOWN ioctls have platform-specific definitions,
hence non-standard definition in QEMU too.
Other than that, they both have a single integer argument, and their
functionality is emulated in a straightforward way.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1567601968-26946-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
RNDRESEEDCRNG is a newer ioctl (added in kernel 4.17), and an
"ifdef" guard is used for that reason in this patch.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1567601968-26946-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU_STRACE and QEMU_RAND_SEED are handled by the parse_args, no need to
do it again in main.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190906165736.5612-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Xtensa binaries built for call0 ABI don't rotate register window on
function calls and returns. Invocation of signal handlers from the
kernel is therefore different in windowed and call0 ABIs.
There's currently no way to determine xtensa ELF binary ABI from the
binary itself. Add handler for the -xtensa-abi-call0 command line
parameter/QEMU_XTENSA_ABI_CALL0 envitonment variable to the qemu-user
and record ABI choice. Use it to initialize PS.WOE in xtensa_cpu_reset.
Check PS.WOE in setup_rt_frame to determine how a signal should be
delivered.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20190906165713.5558-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is needed to support debugging PIE ELF binaries running under QEMU
user mode. Currently, `code_offset` and `data_offset` remain unset for
all ELF binaries, so GDB is unable to correctly locate the position of
the binary's text and data.
The fields `code_offset`, and `data_offset` were originally added way
back in 2006 to support debugging of bFMT executables (978efd6aac),
and support was just never added for ELF. Since non-PIE binaries are
loaded at exactly the address specified in the binary, GDB does not need
to relocate any symbols, so the buggy behavior is not normally observed.
http://sourceware.org/gdb/onlinedocs/gdb/General-Query-Packets.html#index-qOffsets-packet
Buglink: https://bugs.launchpad.net/qemu/+bug/1528239
Signed-off-by: Josh Kunz <jkz@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190816233422.16715-1-jkz@google.com>
[lv: added link to documentation]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Limit the virtual address space for M-profile cpus to 2GB,
so that we avoid all of the magic addresses in the top half
of the M-profile system map.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190822185929.16891-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Turn the scalar macro into a functional macro. Move the creation
of the cpu up a bit within main() so that we can pass it to the
invocation of MAX_RESERVED_VA. Delay the validation of the -R
parameter until MAX_RESERVED_VA is computed.
So far no changes to any of the MAX_RESERVED_VA macros to actually
use the cpu in any way, but ARM will need it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190822185929.16891-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for the memfd_create syscall. If the host does not have the
libc wrapper, translate to a direct syscall with NC-macro.
Buglink: https://bugs.launchpad.net/qemu/+bug/1734792
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190819180947.180725-1-scw@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Just passing NULL means we end up ignoring the bad dfilter spec
instead of reporting it and exiting as we should.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190830143648.2967-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
timer_getoverrun returns the "overrun count" for the timer, which is not
a file descriptor and thus should not call fd_trans_unregister on it.
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190819185348.221825-1-scw@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add the HWCAP2_* bits from kernel version v5.3-rc3.
Enable the bits corresponding to ARMv8.5-CondM and ARMv8.5-FRINT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190809171156.3476-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
filename is only used to open the file if AT_EXECFD is not provided.
But exec_path already contains the path of the file to open.
Remove filename as it is only used in main.c whereas exec_path is
also used in syscall.c.
Fixes: d088d664f2 ("linux-user: identify running binary in /proc/self/exe")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190714134028.315-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is hardware support for double-precision floating-point using
pairs of 32-bit registers. Fix latent bugs in the heretofore unused
helper_itofd and helper_ftoid. Include the bit for cpu "any".
Change the default cpu for linux-user to "any".
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should avoid including the whole of softfloat headers in cpu.h and
explicitly include it only where we will be calling softfloat
functions. We can use the -types.h in cpu.h for the few bits that are
global. We also move the restore_snan_bit_mode into internal.h and
include -helpers.h there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
The alternate signal stack set up by the sigaltstack syscall is
supposed to be per-thread. We were incorrectly implementing it as
process-wide. This causes problems for guest binaries that rely on
this. Notably the Go runtime does, and so we were seeing crashes
caused by races where two guest threads might incorrectly both
execute on the same stack simultaneously.
Replace the global target_sigaltstack_used with a field
sigaltstack_used in the TaskState, and make all the references to the
old global instead get a pointer to the TaskState and use the field.
Fixes: https://bugs.launchpad.net/qemu/+bug/1696773
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190725131645.19501-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The SIOCGSTAMP symbol was previously defined in the
asm-generic/sockios.h header file. QEMU sees that header
indirectly via sys/socket.h
In linux kernel commit 0768e17073dc527ccd18ed5f96ce85f9985e9115
the asm-generic/sockios.h header no longer defines SIOCGSTAMP.
Instead it provides only SIOCGSTAMP_OLD, which only uses a
32-bit time_t on 32-bit architectures.
The linux/sockios.h header then defines SIOCGSTAMP using
either SIOCGSTAMP_OLD or SIOCGSTAMP_NEW as appropriate. If
SIOCGSTAMP_NEW is used, then the tv_sec field is 64-bit even
on 32-bit architectures
To cope with this we must now convert the old and new type from
the target to the host one.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20190718130641.15294-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix a crash with LTP testsuite and aarch64:
tst_test.c:1015: INFO: Timeout per run is 0h 05m 00s
qemu-aarch64: .../qemu/accel/tcg/translate-all.c:2522: page_check_range: Assertion `start < ((target_ulong)1 << L1_MAP_ADDR_SPACE_BITS)' failed.
qemu:handle_cpu_signal received signal outside vCPU context @ pc=0x60001554
page_check_range() should never be called with address outside the guest
address space. This patch adds a guest_addr_valid() check in access_ok()
to only call page_check_range() with a valid address.
Fixes: f6768aa1b4 ("target/arm: fix AArch64 virtual address space size")
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190704084115.24713-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Structure ucontext for MIPS is defined in the following way in
Linux kernel:
(arch/mips/include/uapi/asm/ucontext.h, lines 54-64)
struct ucontext {
/* Historic fields matching asm-generic */
unsigned long uc_flags;
struct ucontext *uc_link;
stack_t uc_stack;
struct sigcontext uc_mcontext;
sigset_t uc_sigmask;
/* Extended context structures may follow ucontext */
unsigned long long uc_extcontext[0];
};
Fix the structure target_ucontext for MIPS to reflect the definition
above, except the correction for field uc_extcontext, which will
follow at some later time.
Fixes: 94c5495d
Reported-by: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1562931470-3700-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This pull request contains a handful of patches that I'd like to target
for the 4.1 soft freeze. There are a handful of new features:
* Support for the 1.11.0, the latest privileged specification.
* Support for reading and writing the PRCI registers.
* Better control over the ISA of the target machine.
* Support for the cpu-topology device tree node.
Additionally, there are a handful of bug fixes including:
* Load reservations are now broken by both store conditional and by
scheduling, which fixes issues with parallel applications.
* Various fixes to the PMP implementation.
* Fixes to the 32-bit linux-user syscall ABI.
* Various fixes for instruction decodeing.
* A fix to the PCI device tree "bus-range" property.
This boots 32-bit and 64-bit OpenEmbedded.
Changes since v2 [riscv-for-master-4.1-sf1-v2]:
* Dropped OpenSBI.
Changes since v1 [riscv-for-master-4.1-sf1]:
* Contains a fix to the sifive_u OpenSBI integration.
-----BEGIN PGP SIGNATURE-----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=lliO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-sf1-v3' into staging
RISC-V Patches for the 4.1 Soft Freeze, Part 2 v3
This pull request contains a handful of patches that I'd like to target
for the 4.1 soft freeze. There are a handful of new features:
* Support for the 1.11.0, the latest privileged specification.
* Support for reading and writing the PRCI registers.
* Better control over the ISA of the target machine.
* Support for the cpu-topology device tree node.
Additionally, there are a handful of bug fixes including:
* Load reservations are now broken by both store conditional and by
scheduling, which fixes issues with parallel applications.
* Various fixes to the PMP implementation.
* Fixes to the 32-bit linux-user syscall ABI.
* Various fixes for instruction decodeing.
* A fix to the PCI device tree "bus-range" property.
This boots 32-bit and 64-bit OpenEmbedded.
Changes since v2 [riscv-for-master-4.1-sf1-v2]:
* Dropped OpenSBI.
Changes since v1 [riscv-for-master-4.1-sf1]:
* Contains a fix to the sifive_u OpenSBI integration.
# gpg: Signature made Wed 03 Jul 2019 09:39:09 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.1-sf1-v3: (32 commits)
hw/riscv: Extend the kernel loading support
hw/riscv: Add support for loading a firmware
hw/riscv: Split out the boot functions
riscv: sifive_u: Update the plic hart config to support multicore
riscv: sifive_u: Do not create hard-coded phandles in DT
disas/riscv: Fix `rdinstreth` constraint
disas/riscv: Disassemble reserved compressed encodings as illegal
riscv: virt: Add cpu-topology DT node.
RISC-V: Update syscall list for 32-bit support.
RISC-V: Clear load reservations on context switch and SC
RISC-V: Add support for the Zicsr extension
RISC-V: Add support for the Zifencei extension
target/riscv: Add support for disabling/enabling Counters
target/riscv: Remove user version information
target/riscv: Require either I or E base extension
qemu-deprecated.texi: Deprecate the RISC-V privledge spec 1.09.1
target/riscv: Set privledge spec 1.11.0 as default
target/riscv: Add the mcountinhibit CSR
target/riscv: Add the privledge spec version 1.11.0
target/riscv: Restructure deprecatd CPUs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU_IFLA_BR_MULTI_BOOLOPT has been added to the wrong function
host_to_target_slave_data_bridge_nlattr(). Move it to
host_to_target_data_bridge_nlattr().
This fixes following error:
Unknown QEMU_IFLA_BR type 46
Fixes: 61b463fbf6 ("linux-user: add new netlink types")
Message-Id: <20190626150855.27446-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Handle EXCP_FPE properly for MIPS in cpu loop.
Note that a vast majority of FP instructions are not affected by
the absence of the code in this patch, as they use alternative code
paths for handling floating point exceptions (see, for example,
invocations of update_fcr31()) - they rely on softfloat library for
keeping track on exceptions that needs to be raised. However, there
are few MIPS FP instructions (an example is CTC1) that use function
do_raise_exception() directly, and they need the case that is added
in this patch to propagate the FPE exception as designed.
The code is based on kernel's function force_fcr31_sig() in
arch/mips/kernel.traps.c.
Reported-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-6-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Bring target_flock definitions to be more in sync with the way
flock is defined in kernel.
Basically, the rules from the kernel are:
1. Majority of architectures have a common flock definition.
2. Architectures with 32-bit MIPS ABIs have a sligtly different
flock definition; those architectures are the only arcitectures
that have HAVE_ARCH_STRUCT_FLOCK defined, and that preprocessor
constant is used in the common header as a flag for including or
not including common flock definition.
3. Sparc architectures also have a sligtly different flock
definition, but the difference is only the padding at the end of
the structure. The presence of that padding is determined by
preprocessor constants __ARCH_FLOCK6_PAD and __ARCH_FLOCK64_PAD.
QEMU linux-user already implements rules 1. and 3. in a very
similar way as they are implemented in kernel. However, rule 2.
is implemented in a dissimilar way (for example, the constant
TARGET_HAVE_ARCH_STRUCT_FLOCK is missing), and this patch brings
QEMU implementation much closer to the kernel implementation.
TARGET_HAVE_ARCH_STRUCT_FLOCK64 constant is also introduced to
mimic HAVE_ARCH_STRUCT_FLOCK64 from kernel, but it is not defined
anywhere, however, this is the case with HAVE_ARCH_STRUCT_FLOCK64
in kernel as well.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-5-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Among MIPS ABIs, only MIPS O32 and N32 have special (different
than other architectures) definition of structure flock in kernel.
Bring target_flock definition in QEMU for MIPS O64 ABI to the
correct state, which is currently different than the most common
definition, and it should actually be the same.
Reported-by: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All of the flags need to be conditional as old systems don't have
statx support. Otherwise it works the same as other stat family
syscalls. This requires the pending patch to add statx support.
Tested on Ubuntu 16.04 (no host statx) and Ubuntu 19.04 (with host
statx) using a riscv32-linux toolchain.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Implement support for translation of system call statx().
The implementation is based on "best effort" approach: if host
is capable of executing statx(), host statx() is used. If not,
the implementation includes invoking a more mature system call
fstatat() on the host side to achieve as close as possible
functionality.
Support for statx() in kernel and glibc was, however, introduced
at different points of time (the difference is more than a year):
- kernel: Linux 4.11 (30 April 2017)
- glibc: glibc 2.28 (1 Aug 2018)
In this patch, the availability of statx() support is established
via __NR_statx (if it is defined, statx() is considered available).
This coincedes with statx() introduction in kernel.
However, the structure statx definition may not be available in
any header for hosts with glibc older than 2.28 (and it is, by
design, to be defined in one of glibc headers), even though the
full statx() functionality may be supported in kernel. Hence, a
structure "target_statx" is defined in this patch, to remove that
dependency on glibc headers, and to use statx() functionality as
soon as the host kernel is capable of supporting it. Such statx
structure definition is used for both target and host structures
statx (of course, this doesn't mean the endian arrangement is
the same on target and host - the endian conversion is done in
all necessary cases).
Signed-off-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This interface has been introduced in 2005 with the
coldfire implementation (e6e5906b6e ColdFire target.)
and looks like to do what the linux-user interface already
does with the TRAP exception rather than the ILLEGAL
exception.
This interface has not been maintained since that.
The semi-hosting interface is not removed so coldfire kernel
with semi-hosting is always supported.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190524162049.806-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
32-bit RISC-V uses _llseek instead of lseek as syscall number 62.
Update syscall list from open-embedded build, primarily because
32-bit RISC-V requires statx support.
Tested with cross gcc testsuite runs for rv32 and rv64, with the
pending statx patch also applied.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The default CPU for pseries has been set to POWER9 by default.
We can use the same default for linux-user
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190609143521.19374-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU_PPC_FEATURE2_VEC_CRYPTO enables the use
of VSX instructions in libcrypto that are accelerated
by the TCG vector instructions now.
QEMU_PPC_FEATURE2_DARN allows to use the new builtin
qemu_guest_getrandom() function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190609143521.19374-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for the option IPV6_<ADD|DROP>_MEMBERSHIP of the syscall
setsockopt(). This option controls membership in multicast groups.
Argument is a pointer to a struct ipv6_mreq.
The glibc <netinet/in.h> header defines the ipv6_mreq structure,
which includes the following members:
struct in6_addr ipv6mr_multiaddr;
unsigned int ipv6mr_interface;
Whereas the kernel in its <linux/in6.h> header defines following
members of the same structure:
struct in6_addr ipv6mr_multiaddr;
int ipv6mr_ifindex;
POSIX defines ipv6mr_interface [1].
__UAPI_DEF_IVP6_MREQ appears in kernel headers with v3.12:
cfd280c91253 net: sync some IP headers with glibc
Without __UAPI_DEF_IVP6_MREQ, kernel defines ipv6mr_ifindex, and
this is explained in cfd280c91253:
"If you include the kernel headers first you get those,
and if you include the glibc headers first you get those,
and the following patch arranges a coordination and
synchronization between the two."
So before 3.12, a program can't include both <netinet/in.h> and
<linux/in6.h>.
In linux-user/syscall.c, we only include <netinet/in.h> (glibc) and
not <linux/in6.h> (kernel headers), so ipv6mr_interface is the one
to use.
[1] http://pubs.opengroup.org/onlinepubs/009695399/basedefs/netinet/in.h.html
Signed-off-by: Neng Chen <nchen@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1560953834-29584-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for options SOL_ALG of the syscall setsockopt(). This
option is used in relation to Linux kernel Crypto API, and allows
a user to set additional information for the cipher operation via
syscall setsockopt(). The field "optname" must be one of the
following:
- ALG_SET_KEY – seting the key
- ALG_SET_AEAD_AUTHSIZE – set the authentication tag size
SOL_ALG is relatively newer setsockopt() option. Therefore, the
code that handles SOL_ALG is enclosed in "ifdef" so that the build
does not fail for older kernels that do not contain support for
SOL_ALG. "ifdef" also contains check if ALG_SET_KEY and
ALG_SET_AEAD_AUTHSIZE are defined.
Signed-off-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1560953834-29584-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When we have updated kernel headers to 5.2-rc1 we have introduced
new syscall numbers that can be not supported by older kernels
and fail with ENOSYS while the guest emulation succeeded before
because the syscalls were emulated with ipc().
This patch fixes the problem by using ipc() if the new syscall
returns ENOSYS.
Fixes: 86e636951d ("linux-user: fix __NR_semtimedop undeclared error")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190529084804.25950-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is ostensibly to avoid the weirdness of len looking like it might
come from a guest and sometimes being used. While we are at it fix up
the error checking for the arm-linux-user implementation of the API
which got flagged up by Coverity (CID 1401700).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
Cleanup in the boilerplate that each target must define.
Replace xtensa_env_get_cpu with env_archcpu. The combination
CPU(xtensa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Move cpu_get_tb_cpu_state below the include of "exec/cpu-all.h"
so that the definition of env_cpu is available.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace tilegx_env_get_cpu with env_archcpu. The combination
CPU(tilegx_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace sparc_env_get_cpu with env_archcpu. The combination
CPU(sparc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace sh_env_get_cpu with env_archcpu. The combination
CPU(sh_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace s390_env_get_cpu with env_archcpu. The combination
CPU(s390_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace riscv_env_get_cpu with env_archcpu. The combination
CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace ppc_env_get_cpu with env_archcpu. The combination
CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace openrisc_env_get_cpu with env_archcpu. The combination
CPU(openrisc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace mips_env_get_cpu with env_archcpu. The combination
CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace mb_env_get_cpu with env_archcpu. The combination
CPU(mb_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Move cpu_mmu_index below the include of "exec/cpu-all.h",
so that the definition of env_archcpu is available.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
The combination CPU(m68k_env_get_cpu) should have used
ENV_GET_CPU to begin; use env_cpu now.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace x86_env_get_cpu with env_archcpu. The combination
CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace hppa_env_get_cpu with env_archcpu. The combination
CPU(hppa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace cris_env_get_cpu with env_archcpu. The combination
CPU(cris_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
