VGIF allows STGI and CLGI to execute in guest mode and control virtual
interrupts in guest mode.
When the VGIF feature is enabled then:
* executing STGI in the guest sets bit 9 of the VMCB offset 60h.
* executing CLGI in the guest clears bit 9 of the VMCB offset 60h.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210730070742.9674-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APM2 requires that VMRUN and VMLOAD canonicalize (sign extend to 63
from 48/57) all base addresses in the segment registers that have been
respectively loaded.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210804113058.45186-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Booting Fedora kernels with -cpu max hangs very early in boot. Disabling
the la57 CPUID bit fixes the problem. git bisect traced the regression to
commit 213ff024a2 (HEAD, refs/bisect/bad)
Author: Lara Lazier <laramglazier@gmail.com>
Date: Wed Jul 21 17:26:50 2021 +0200
target/i386: Added consistency checks for CR4
All MBZ bits in CR4 must be zero. (APM2 15.5)
Added reserved bitmask and added checks in both
helper_vmrun and helper_write_crN.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In this commit CR4_RESERVED_MASK is missing CR4_LA57_MASK and
two others. Adding this lets Fedora kernels boot once again.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20210831175033.175584-1-berrange@redhat.com>
[Removed VMXE/SMXE, matching the commit message. - Paolo]
Fixes: 213ff024a2 ("target/i386: Added consistency checks for CR4", 2021-07-22)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the new gen16 features to the default model and fence them for
machine version 6.1 and earlier.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210907101017.27126-1-borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's enable storage keys lazily under TCG, just as we do under KVM.
Only fairly old Linux versions actually make use of storage keys, so it
can be kind of wasteful to allocate quite some memory and track
changes and references if nobody cares.
We have to make sure to flush the TLB when enabling storage keys after
the VM was already running: otherwise it might happen that we don't
catch references or modifications afterwards.
Add proper documentation to all callbacks.
The kvm-unit-tests skey tests keeps on working with this change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-14-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avoid setting the key if nothing changed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-9-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's move address validation into mmu_translate() and
mmu_translate_real(). This allows for checking whether an absolute
address is valid before looking up the storage key. We can now get rid of
the ram_size check.
Interestingly, we're already handling LOAD REAL ADDRESS wrong, because
a) We're not supposed to touch storage keys
b) We're not supposed to convert to an absolute address
Let's use a fake, negative MMUAccessType to teach mmu_translate() to
fix that handling and to not perform address validation.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-8-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Looks like we forgot to adjust documentation of one parameter.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-7-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The access type is unused since commit 81d7e3bc45 ("s390x/mmu: Inject
DAT exceptions from a single place").
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-6-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's replace the ram_size check by a proper physical address space
check (for example, to prepare for memory hotplug), trigger addressing
exceptions and trace the return value of the storage key getter/setter.
Provide an helper mmu_absolute_addr_valid() to be used in other context
soon. Always test for "read" instead of "write" as we are not actually
modifying the page itself.
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-5-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For RRBE, SSKE, and ISKE, we're dealing with real addresses, so we have to
convert to an absolute address first.
In the future, when adding EDAT1 support, we'll have to pay attention to
SSKE handling, as we'll be dealing with absolute addresses when the
multiple-block control is one.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-4-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Right now we could set an 8-bit storage key via SSKE and retrieve it
again via ISKE, which is against the architecture description:
SSKE:
"
The new seven-bit storage-key value, or selected bits
thereof, is obtained from bit positions 56-62 of gen-
eral register R 1 . The contents of bit positions 0-55
and 63 of the register are ignored.
"
ISKE:
"
The seven-bit storage key is inserted in bit positions
56-62 of general register R 1 , and bit 63 is set to zero.
"
Let's properly ignore bit 63 to create the correct seven-bit storage key.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-3-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's wrap the address just like for SSKE and ISKE.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-2-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
schib->pmcw.chars is 32bit, not 16bit. This fixes the kvm-unit-tests
"css" test, which fails with:
FAIL: Channel Subsystem: measurement block format1: Unaligned MB origin:
Program interrupt: expected(21) == received(0)
Because we end up not injecting an operand program exception.
Fixes: a54b8ac340 ("css: SCHIB measurement block origin must be aligned")
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20210805143753.86520-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We not only invalidate the translation of the range 0x0-0x2000, we also
invalidate the translation of the new prefix range and the translation
of the old prefix range -- because real2abs would return different
results for all of these ranges when changing the prefix location.
This fixes the kvm-unit-tests "edat" test that just hangs before this
patch because we end up clearing the new prefix area instead of the old
prefix area.
While at it, let's not do anything in case the prefix doesn't change.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20210805125938.74034-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a definition for the Fujitsu A64FX processor.
The A64FX processor does not implement the AArch32 Execution state,
so there are no associated AArch32 Identification registers.
For SVE, the A64FX processor supports only 128,256 and 512bit vector
lengths.
The Identification register values are defined based on the FX700,
and have been tested and confirmed.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have a complete MVE emulation, so we can enable it in our
Cortex-M55 model by setting the ID registers to match those of a
Cortex-M55 with full MVE support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VRINT insns, which round floating point inputs
to integer values, leaving them in floating point format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT instruction which converts between single
and half precision floating point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT which converts from floating-point to integer
using a rounding mode specified by the instruction. We implement
this similarly to the Neon equivalents, by passing the required
rounding mode as an extra integer parameter to the helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE "VCVT (between floating-point and integer)" insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT insns which convert between floating and fixed
point. As with the Neon equivalents, these use essentially the same
constant encoding as right-shift-by-immediate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp scalar comparisons VCMP and VPT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp vector comparisons VCMP and VPT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXNMV, VMINNMV, VMAXNMAV, VMINNMAV insns. These
calculate the maximum or minimum of floating point elements across a
vector, starting with a value in a general purpose register and
returning the result there.
The pseudocode silences a possible SNaN in the accumulating result
on every iteration (by calling FPConvertNaN), but we do it only
on the input ra, because if none of the inputs to float*_maxnum
or float*_minnum are SNaNs then the result can't be an SNaN.
Note that we can't use the float*_maxnuma() etc functions we defined
earlier for VMAXNMA and VMINNMA, because we mustn't take the absolute
value of the starting general-purpose register value, which could be
negative.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp-with-scalar VFMA and VFMAS insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE scalar floating point insns VADD, VSUB and VMUL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXNMA and VMINNMA insns; these are 2-operand, but
the destination register must be the same as one of the source
registers.
We defer the decode of the size in bit 28 to the individual insn
patterns rather than doing it in the format, because otherwise we
would have a single insn pattern that overlapped with two groups (eg
VMAXNMA with the VMULH_S and VMULH_U groups). Having two insn
patterns per insn seems clearer than a complex multilevel nesting
of overlapping and non-overlapping groups.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VCMUL and VCMLA insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VFMA and VFMS insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VCADD insn. Note that here the size bit is the
opposite sense to the other 2-operand fp insns.
We don't check for the sz == 1 && Qd == Qm UNPREDICTABLE case,
because that would mean we can't use the DO_2OP_FP macro in
translate-mve.c.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement more simple 2-operand floating point MVE insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VADD (floating-point) insn. Handling of this is
similar to the 2-operand integer insns, except that we must take care
to only update the floating point exception status if the least
significant bit of the predicate mask for each element is active.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove gen_get_gpr, as the function becomes unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-25-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Exit early if check_access fails.
Split out do_hlv, do_hsv, do_hlvx subroutines.
Use dest_gpr, get_gpr in the new subroutines.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-24-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-23-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-22-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Always use tcg_gen_deposit_z_tl; the special case for
shamt >= 32 is handled there.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-21-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-20-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduce csrr and csrw helpers, for read-only and write-only insns.
Note that we do not properly implement this in riscv_csrrw, in that
we cannot distinguish true read-only (rs1 == 0) from any other zero
write_mask another source register -- this should still raise an
exception for read-only registers.
Only issue gen_io_start for CF_USE_ICOUNT.
Use ctx->zero for csrrc.
Use get_gpr and dest_gpr.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-19-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We failed to write into *val for these read functions;
replace them with read_zero. Only warn about unsupported
non-zero value when writing a non-zero value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-18-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We distinguish write-only by passing ret_value as NULL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-17-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-16-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Narrow the scope of t0 in trans_jalr.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-15-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These operations can be done in one instruction on some hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-14-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These operations are greatly simplified by ctx->w, which allows
us to fold gen_shiftw into gen_shift. Split gen_shifti into
gen_shift_imm_{fn,tl} like we do for gen_arith_imm_{fn,tl}.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use ctx->w for ctpopw, which is the only one that can
re-use the generic algorithm for the narrow operation.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-12-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvb.c.inc.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvm.c.inc.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Split out gen_mulh and gen_mulhu and use the common helper.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-9-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
