There's a bug on dest that if a double fault triggered on dest qemu (a
network issue during postcopy-recover), we won't set PAUSED correctly
because we assumed we always came from ACTIVE.
Fix that by always overwriting the state to PAUSE.
We could also check for these two states, but maybe it's an overkill. We
did the same on the src QEMU to unconditionally switch to PAUSE anyway.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-10-peterx@redhat.com>
A few code paths exist in the source code,where a migration is
marked as failed via MIGRATION_STATUS_FAILED, but the failure happens
outside of migration.c
In such cases, an error_report() call is made, however the current
MigrationState is never updated with the error description, and hence
clients like libvirt never know the actual reason for the failure.
This patch covers such cases outside of migration.c and updates the
error description at the appropriate places.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-3-tejus.gk@nutanix.com>
Currently, a few code paths exist in the function vmstate_save_state_v,
which ultimately leads to a migration failure. However, an update in the
current MigrationState for the error description is never done.
vmstate.c somehow doesn't seem to allow the use of migrate_set_error due
to some dependencies for unit tests. Hence, this patch introduces a new
function vmstate_save_state_with_err, which will eventually propagate
the error message to savevm.c where a migrate_set_error call can be
eventually done.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-2-tejus.gk@nutanix.com>
Add a new .save_prepare() handler to struct SaveVMHandlers. This handler
is called early, even before migration starts, and can be used by
devices to perform early checks.
Refactor migrate_init() to be able to return errors and call
.save_prepare() from there.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Initialization of mig_stats, compression_counters and VFIO bytes
transferred is hard-coded in migration code path and snapshot code path.
Make the code cleaner by initializing them in migrate_init().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The functions in target.c are not static, yet they don't have a proper
migration prefix. Add such prefix.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We do a qemu_fclose() just after that, that also does a qemu_fflush(),
so remove one qemu_fflush().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230530183941.7223-3-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fast don't say much. Noflush indicates more clearly that it is like
qemu_file_transferred but without the flush.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230530183941.7223-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, VFIO bytes_transferred is not reset properly:
1. bytes_transferred is not reset after a VM snapshot (so a migration
following a snapshot will report incorrect value).
2. bytes_transferred is a single counter for all VFIO devices, however
upon migration failure it is reset multiple times, by each VFIO
device.
Fix it by introducing a new function vfio_reset_bytes_transferred() and
calling it during migration and snapshot start.
Remove existing bytes_transferred reset in VFIO migration state
notifier, which is not needed anymore.
Fixes: 3710586caa ("qapi: Add VFIO devices migration stats in Migration stats")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Implement switchover ack logic. This prevents the source from stopping
the VM and completing the migration until an ACK is received from the
destination that it's OK to do so.
To achieve this, a new SaveVMHandlers handler switchover_ack_needed()
and a new return path message MIG_RP_MSG_SWITCHOVER_ACK are added.
The switchover_ack_needed() handler is called during migration setup in
the destination to check if switchover ack is used by the migrated
device.
When switchover is approved by all migrated devices in the destination
that support this capability, the MIG_RP_MSG_SWITCHOVER_ACK return path
message is sent to the source to notify it that it's OK to do
switchover.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Actually global_state_store() can never fail. Let's get rid of extra
error paths.
To make things clear, use new runstate_get() and use same approach for
global_state_store() and global_state_store_running().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Function is already quite long.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-7-quintela@redhat.com>
Change all the functions that use it. It was already passed as
uint64_t.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504113841.23130-8-quintela@redhat.com>
migration_stats is just too long, and it is going to have more than
ram counters in the near future.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
There is already include/qemu/stats.h, so stats.h was a bad idea.
We want this file to not depend on anything else, we will move all the
migration counters/stats to this struct.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
For VMS_ARRAY typed vmsd fields, also dump the number of entries in the
array in -vmstate-dump.
Without such information, vmstate static checker can report false negatives
of incompatible vmsd on VMS_ARRAY typed fields, when the src/dst do not
have the same type of array defined. It's because in the checker we only
check against size of fields within a VMSD field.
One example: e1000e used to have a field defined as a boolean array with 5
entries, then removed it and replaced it with UNUSED (in 31e3f318c8):
- VMSTATE_BOOL_ARRAY(core.eitr_intr_pending, E1000EState,
- E1000E_MSIX_VEC_NUM),
+ VMSTATE_UNUSED(E1000E_MSIX_VEC_NUM),
It's a legal replacement but vmstate static checker is not happy with it,
because it checks only against the "size" field between the two
fields (here one is BOOL_ARRAY, the other is UNUSED):
For BOOL_ARRAY:
{
"field": "core.eitr_intr_pending",
"version_id": 0,
"field_exists": false,
"size": 1
},
For UNUSED:
{
"field": "unused",
"version_id": 0,
"field_exists": false,
"size": 5
},
It's not the script to blame because there's just not enough information
dumped to show the total size of the entry for an array. Add it.
Note that this will not break old vmstate checker because the field will
just be ignored.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead of print it to STDERR, bring the error upwards so that it can be
reported via QMP responses.
E.g.:
{ "execute": "migrate-set-capabilities" ,
"arguments": { "capabilities":
[ { "capability": "postcopy-ram", "state": true } ] } }
{ "error":
{ "class": "GenericError",
"desc": "Postcopy is not supported: Host backend files need to be TMPFS
or HUGETLBFS only" } }
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once that we are there, we rename the function to migrate_block()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
We move there all capabilities helpers from migration.c.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Following David advise:
- looked through the history, capabilities are newer than 2012, so we
can remove that bit of the header.
- This part is posterior to Anthony.
Original Author is Orit. Once there,
I put myself. Peter Xu also did quite a bit of work here.
Anyone else wants/needs to be there? I didn't search too hard
because nobody asked before to be added.
What do you think?
It is clear from the context what that means, and such a long name
with the extra long names of the capabilities make very difficilut to
stay inside the 80 columns limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that res_compatible is removed, they don't make sense anymore.
We remove the _only preffix. And to make things clearer we rename
them to must_precopy and can_postcopy.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Nothing assigns to it after previous commit.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy with preempt-mode enabled needs two channels to communicate. The
order of channel establishment is not guaranteed. It can happen that the
dest QEMU got the preempt channel connection request before the main
channel is established, then the migration may make no progress even during
precopy due to the wrong order.
To fix it, create the preempt channel only if we know the main channel is
established.
For a general postcopy migration, we delay it until postcopy_start(),
that's where we already went through some part of precopy on the main
channel. To make sure dest QEMU has already established the channel, we
wait until we got the first PONG received. That's something we do at the
start of precopy when postcopy enabled so it's guaranteed to happen sooner
or later.
For a postcopy recovery, we delay it to qemu_savevm_state_resume_prepare()
where we'll have round trips of data on bitmap synchronizations, which
means the main channel must have been established.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I called the helper function from the wrong top level function.
This code was introduced in:
commit c8df4a7aef
Author: Juan Quintela <quintela@redhat.com>
Date: Mon Oct 3 02:00:03 2022 +0200
migration: Split save_live_pending() into state_pending_*
We split the function into to:
- state_pending_estimate: We estimate the remaining state size without
stopping the machine.
- state pending_exact: We calculate the exact amount of remaining
state.
Thanks to Avihai Horon <avihaih@nvidia.com> for finding it.
Fixes:c8df4a7aeffcb46020f610526eea621fa5b0cd47
When we introduced that patch, we enden calling
state_pending_estimate() helper from qemu_savevm_statepending_exact()
and
state_pending_exact() helper from qemu_savevm_statepending_estimate()
This patch fixes it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Perform a check on vmsd structures during test runs in the hope
of catching any missing terminators and other simple screwups.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We fairly regularly forget VMSTATE_END_OF_LIST markers off descriptions;
given that the current check is only for ->name being NULL, sometimes
we get unlucky and the code apparently works and no one spots the error.
Explicitly add a flag, VMS_END that should be set, and assert it is
set during the traversal.
Note: This can't go in until we update the copy of vmstate.h in slirp.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For virtio-mem, we want to have the plugged/unplugged state of memory
blocks available before migrating any actual RAM content, and perform
sanity checks before touching anything on the destination. This
information is immutable on the migration source while migration is active,
We want to use this information for proper preallocation support with
migration: currently, we don't preallocate memory on the migration target,
and especially with hugetlb, we can easily run out of hugetlb pages during
RAM migration and will crash (SIGBUS) instead of catching this gracefully
via preallocation.
Migrating device state via a VMSD before we start iterating is currently
impossible: the only approach that would be possible is avoiding a VMSD
and migrating state manually during save_setup(), to be restored during
load_state().
Let's allow for migrating device state via a VMSD early, during the
setup phase in qemu_savevm_state_setup(). To keep it simple, we
indicate applicable VMSD's using an "early_setup" flag.
Note that only very selected devices (i.e., ones seriously messing with
RAM setup) are supposed to make use of such early state migration.
While at it, also use a bool for the "unmigratable" member.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>S
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
... and store it in the migration state. This is a preparation for
storing selected vmds's already in qemu_savevm_state_setup().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's move more code into vmstate_save(), reducing code duplication and
preparing for reuse of vmstate_save() in qemu_savevm_state_setup(). We
have to move vmstate_save() to make the compiler happy.
We'll now also trace from qemu_save_device_state(), triggering the same
tracepoints as previously called from
qemu_savevm_state_complete_precopy_non_iterable() only. Note that
qemu_save_device_state() ignores iterable device state, such as RAM,
and consequently doesn't trigger some other trace points (e.g.,
trace_savevm_state_setup()).
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Until previous commit, save_live_pending() was used for ram. Now with
the split into state_pending_estimate() and state_pending_exact() it
is not needed anymore, so remove them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We split the function into to:
- state_pending_estimate: We estimate the remaining state size without
stopping the machine.
- state pending_exact: We calculate the exact amount of remaining
state.
The only "device" that implements different functions for _estimate()
and _exact() is ram.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit d7e2fe4aac.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To allow postcopy recovery, the ram fast load (preempt-only) dest QEMU thread
needs similar handling on fault tolerance. When ram_load_postcopy() fails,
instead of stopping the thread it halts with a semaphore, preparing to be
kicked again when recovery is detected.
A mutex is introduced to make sure there's no concurrent operation upon the
socket. To make it simple, the fast ram load thread will take the mutex during
its whole procedure, and only release it if it's paused. The fast-path socket
will be properly released by the main loading thread safely when there's
network failures during postcopy with that mutex held.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185506.27257-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Create a new socket for postcopy to be prepared to send postcopy requested
pages via this specific channel, so as to not get blocked by precopy pages.
A new thread is also created on dest qemu to receive data from this new channel
based on the ram_load_postcopy() routine.
The ram_load_postcopy(POSTCOPY) branch and the thread has not started to
function, and that'll be done in follow up patches.
Cleanup the new sockets on both src/dst QEMUs, meanwhile look after the new
thread too to make sure it'll be recycled properly.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185502.27149-1-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: With Peter's fix to quieten compiler warning on
start_migration
Now that all QEMUFile callbacks are removed, the entire concept can be
deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With this change, all QEMUFile usage is backed by QIOChannel at
last.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Wrap long lines
The name 'ftell' gives the misleading impression that the QEMUFile
objects are seekable. This is not the case, as in general we just
have an opaque stream. The users of this method are only interested
in the total bytes processed. This switches to a new name that
reflects the intended usage.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Wrapped long line
Previously migration didn't have an easy way to cleanup the listening
transport, migrate recovery only allows to execute once. That's done with a
trick flag in postcopy_recover_triggered.
Now the facility is already there.
Drop postcopy_recover_triggered and instead allows a new migrate-recover to
release the previous listener transport.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-8-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Snapshots run also under the BQL, so they all are
in the global state API. The aiocontext lock that they hold
is currently an overkill and in future could be removed.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-23-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the bdrv_activate renaming, change also the name
of the respective callers.
bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Postcopy create threads. A common manner is we init a sem and use it to sync
with the thread. Namely, we have fault_thread_sem and listen_thread_sem and
they're only used for this.
Make it a shared infrastructure so it's easier to create yet another thread.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-7-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Postcopy handles huge pages in a special way that currently we can only have
one "channel" to transfer the page.
It's because when we install pages using UFFDIO_COPY, we need to have the whole
huge page ready, it also means we need to have a temp huge page when trying to
receive the whole content of the page.
Currently all maintainance around this tmp page is global: firstly we'll
allocate a temp huge page, then we maintain its status mostly within
ram_load_postcopy().
To enable multiple channels for postcopy, the first thing we need to do is to
prepare N temp huge pages as caching, one for each channel.
Meanwhile we need to maintain the tmp huge page status per-channel too.
To give some example, some local variables maintained in ram_load_postcopy()
are listed; they are responsible for maintaining temp huge page status:
- all_zero: this keeps whether this huge page contains all zeros
- target_pages: this counts how many target pages have been copied
- host_page: this keeps the host ptr for the page to install
Move all these fields to be together with the temp huge pages to form a new
structure called PostcopyTmpPage. Then for each (future) postcopy channel, we
need one structure to keep the state around.
For vanilla postcopy, obviously there's only one channel. It contains both
precopy and postcopy pages.
This patch teaches the dest migration node to start realize the possible number
of postcopy channels by introducing the "postcopy_channels" variable. Its
value is calculated when setup postcopy on dest node (during POSTCOPY_LISTEN
phase).
Vanilla postcopy will have channels=1, but when postcopy-preempt capability is
enabled (in the future), we will boost it to 2 because even during partial
sending of a precopy huge page we still want to preempt it and start sending
the postcopy requested page right away (so we start to keep two temp huge
pages; more if we want to enable multifd). In this patch there's a TODO marked
for that; so far the channels is always set to 1.
We need to send one "host huge page" on one channel only and we cannot split
them, because otherwise the data upon the same huge page can locate on more
than one channel so we need more complicated logic to manage. One temp host
huge page for each channel will be enough for us for now.
Postcopy will still always use the index=0 huge page even after this patch.
However it prepares for the latter patches where it can start to use multiple
channels (which needs src intervention, because only src knows which channel we
should use).
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-5-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed up long line
Remove the old two tracepoints and they're even near each other:
trace_loadvm_postcopy_handle_run_cpu_sync()
trace_loadvm_postcopy_handle_run_vmstart()
Add trace_loadvm_postcopy_handle_run_bh() with a finer granule trace.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The enablement of postcopy listening has a few steps, add a few tracepoints to
be there ready for some basic measurements for them.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It'll be easier to read the name rather than index of sub-cmd when debugging.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Should qemu_savevm_state_iterate() encounter a failure when calling a
particular save_live_iterate function, report the error code returned
by the function.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
