The NVIDIA BAR5 quirk is targeting an ioport BAR. Some older devices
have a BAR5 which is not ioport and can induce a segfault here. Test
the BAR type to skip these devices.
Link: https://bugs.launchpad.net/qemu/+bug/1678466
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This reverts commit c2b2e158cc.
The original patch intend to prevent linux i915 driver from using
stolen meory. But this patch breaks windows IGD driver loading on
Gen9+, as IGD HW will use stolen memory on Gen9+, once windows IGD
driver see zero size stolen memory, it will unload.
Meanwhile stolen memory will be disabled in 915 when i915 run as
a guest.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
[aw: Gen9+ is SkyLake and newer]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Regardless of running in UPT or legacy mode, the guest igd
drivers may attempt to use stolen memory, however only legacy
mode has BIOS support for reserving stolen memmory in the
guest VM. We zero out the stolen memory size in all cases,
then guest igd driver won't use stolen memory.
In legacy mode, user could use x-igd-gms option to specify the
amount of stolen memory which will be pre-allocated and reserved
by bios for igd use.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99028https://bugs.freedesktop.org/show_bug.cgi?id=99025
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since commit 4bb571d857 ("pci/pcie: don't assume cap id 0 is
reserved") removes the internal use of extended capability ID 0, the
comment here becomes invalid. However, peeling back the onion, the
code is still correct and we still can't seed the capability chain
with ID 0, unless we want to muck with using the version number to
force the header to be non-zero, which is much uglier to deal with.
The comment also now covers some of the subtleties of using cap ID 0,
such as transparently indicating absence of capabilities if none are
added. This doesn't detract from the correctness of the referenced
commit as vfio in the kernel also uses capability ID zero to mask
capabilties. In fact, we should skip zero capabilities precisely
because the kernel might also expose such a capability at the head
position and re-introduce the problem.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Tested-by: Jintack Lim <jintack@cs.columbia.edu>
Currently we ignore this error, report it with error_reportf_err()
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Linux vfio driver supports to do VFIO_IOMMU_UNMAP_DMA for a very big
region. This can be leveraged by QEMU IOMMU implementation to cleanup
existing page mappings for an entire iova address space (by notifying
with an IOTLB with extremely huge addr_mask). However current
vfio_iommu_map_notify() does not allow that. It make sure that all the
translated address in IOTLB is falling into RAM range.
The check makes sense, but it should only be a sensible checker for
mapping operations, and mean little for unmap operations.
This patch moves this check into map logic only, so that we'll get
faster unmap handling (no need to translate again), and also we can then
better support unmapping a very big region when it covers non-ram ranges
or even not-existing ranges.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A cleanup for vfio_iommu_map_notify(). Now we will fetch vaddr even if
the operation is unmap, but it won't hurt much.
One thing to mention is that we need the RCU read lock to protect the
whole translation and map/unmap procedure.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We traces its range, but we don't know whether it's a MAP/UNMAP. Let's
dump it as well.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both devices seem to be specific to the ARM platform. It's confusing
for the users if they show up on other target architectures, too
(e.g. when the user runs QEMU with "-device ?" to get a list of
supported devices). Thus let's introduce proper configuration switches
so that the devices are only compiled and included when they are
really required.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The device has "bridge" in its name, so it should obviously be in
the category DEVICE_CATEGORY_BRIDGE.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Previous IGD, up through Broadwell, only seem to write GTT values into
the first 1MB of space allocated for the BDSM, but clearly the GTT
can be multiple MB in size. Our test in vfio_igd_quirk_data_write()
correctly filters out indexes beyond 1MB, but given the 1MB mask we're
using, we re-apply writes only to the first 1MB of the guest allocated
BDSM.
We can't assume either the host or guest BDSM is naturally aligned, so
we can't simply apply a different mask. Instead, save the host BDSM
and do the arithmetic to subtract the host value to get the BDSM
offset and add it to the guest allocated BDSM.
Reported-by: Alexander Indenbaum <alexander.indenbaum@gmail.com>
Tested-by: Alexander Indenbaum <alexander.indenbaum@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
msix_init() reports errors with error_report(), which is wrong when
it's used in realize(). The same issue was fixed for msi_init() in
commit 1108b2f. In order to make the API change as small as possible,
leave the return value check to later patch.
For some devices(like e1000e, vmxnet3, nvme) who won't fail because of
msix_init's failure, suppress the error report by passing NULL error
object.
Bonus: add comment for msix_init.
CC: Jiri Pirko <jiri@resnulli.us>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Hannes Reinecke <hare@suse.de>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now the kernel commit 05f0c03fbac1 ("vfio-pci: Allow to mmap
sub-page MMIO BARs if the mmio page is exclusive") allows VFIO
to mmap sub-page BARs. This is the corresponding QEMU patch.
With those patches applied, we could passthrough sub-page BARs
to guest, which can help to improve IO performance for some devices.
In this patch, we expand MemoryRegions of these sub-page
MMIO BARs to PAGE_SIZE in vfio_pci_write_config(), so that
the BARs could be passed to KVM ioctl KVM_SET_USER_MEMORY_REGION
with a valid size. The expanding size will be recovered when
the base address of sub-page BAR is changed and not page aligned
any more in guest. And we also set the priority of these BARs'
memory regions to zero in case of overlap with BARs which share
the same page with sub-page BARs in guest.
Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When a PCI device is reset, pci_do_device_reset resets all BAR addresses
in the relevant PCIDevice's config buffer.
The VFIO configuration space stays untouched, so the guest OS may choose
to skip restoring the BAR addresses as they would seem intact. The PCI
device may be left non-operational.
One example of such a scenario is when the guest exits S3.
Fix this by resetting the BAR addresses in the VFIO configuration space
as well.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As reported in the link below, user has a PCI device with a 4KB BAR
which contains the MSI-X table. This seems to hit a corner case in
the kernel where the region reports being mmap capable, but the sparse
mmap information reports a zero sized range. It's not entirely clear
that the kernel is incorrect in doing this, but regardless, we need
to handle it. To do this, fill our mmap array only with non-zero
sized sparse mmap entries and add an error return from the function
so we can tell the difference between nr_mmaps being zero based on
sparse mmap info vs lack of sparse mmap info.
NB, this doesn't actually change the behavior of the device, it only
removes the scary "Failed to mmap ... Performance may be slow" error
message. We cannot currently create an mmap over the MSI-X table.
Link: http://lists.nongnu.org/archive/html/qemu-discuss/2016-10/msg00009.html
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Setting skip_dump on a MemoryRegion allows us to modify one specific
code path, but the restriction we're trying to address encompasses
more than that. If we have a RAM MemoryRegion backed by a physical
device, it not only restricts our ability to dump that region, but
also affects how we should manipulate it. Here we recognize that
MemoryRegions do not change to sometimes allow dumps and other times
not, so we replace setting the skip_dump flag with a new initializer
so that we know exactly the type of region to which we're applying
this behavior.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
When vfio device is reset(encounter FLR, or bus reset), if need to do
bus reset(vfio_pci_hot_reset_one is called), vfio_pci_pre_reset &
vfio_pci_post_reset will be called twice.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introductory comment for rtl8168 VFIO MSI-X quirk states:
At BAR2 offset 0x70 there is a dword data register,
offset 0x74 is a dword address register.
vfio: vfio_bar_read(0000:05:00.0:BAR2+0x70, 4) = 0xfee00398 // read data
Thus, correct offset for data read is 0x70,
but function vfio_rtl8168_quirk_data_read() wrongfully uses offset 0x74.
Signed-off-by: Thorsten Kohfeldt <thorsten.kohfeldt@gmx.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In case the end-user calls qemu with -vfio-pci option without passing
either sysfsdev or host property value, the device is interpreted as
0000:00:00.0. Let's create a specific error message to guide the end-user.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The returned value (either -errno or -1) is not used anymore by the caller,
vfio_realize, since the error now is stored in the error object. So let's
remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The returned value is not used anymore by the caller, vfio_realize,
since the error now is stored in the error object. So let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch converts VFIO PCI to realize function.
Also original initfn errors now are propagated using QEMU
error objects. All errors are formatted with the same pattern:
"vfio: %s: the error description"
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch propagates errors encountered during vfio_base_device_init
up to the realize function.
In case the host value is not set or badly formed we now report an
error.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In case the vfio_init_intp fails we currently do not return an
error value. This patch fixes the bug. The returned value is not
explicit but in practice the error object is the one used to
report the error to the end-user and the actual returned error
value is not used.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Propagate the vfio_populate_device errors up to vfio_base_device_init.
The error object also is passed to vfio_init_intp. At the moment we
only report the error. Subsequent patches will propagate the error
up to the realize function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
In vfio platform vfio_base_device_init we currently just report the
error. Subsequent patches will propagate the error up to the realize
function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
For the time being let's just simply report the error in
vfio platform's vfio_base_device_init(). A subsequent patch will
duly propagate the error up to vfio_platform_realize.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The error is currently simply reported in vfio_get_group. Don't
bother too much with the prefix which will be handled at upper level,
later on.
Also return an error value in case container->error is not 0 and
the container is teared down.
On vfio_spapr_remove_window failure, we also report an error whereas
it was silent before.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
In vfio_probe_igd_bar4_quirk, simply report the error.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
The error is cascaded downto vfio_add_std_cap and then vfio_msi(x)_setup,
vfio_setup_pcie_cap.
vfio_add_ext_cap does not return anything else than 0 so let's transform
it into a void function.
Also use pci_add_capability2 which takes an error object.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
The error object is propagated down to vfio_intx_enable_kvm().
The three other callers, vfio_intx_enable_kvm(), vfio_msi_disable_common()
and vfio_pci_post_reset() do not propagate the error and simply call
error_reportf_err() with the ERR_PREFIX formatting.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
The returned value will be removed later on.
We now format an error in case of reading failure for
- the MSIX flags
- the MSIX table,
- the MSIX PBA.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
The returned value will be removed later on.
The case where error recovery cannot be enabled is not converted into
an error object but directly reported through error_report, as before.
Populating an error instead would cause the future realize function to
fail, which is not wanted.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for the same operation in
vfio_populate_device. Eventually this contributes to the migration
to VFIO-PCI realize.
We now report an error on vfio_get_region_info failure.
vfio_probe_igd_bar4_quirk is not involved in the migration to realize
and simply calls error_reportf_err.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To prepare for migration to realize, let's use a local error
object in vfio_initfn. Also let's use the same error prefix for all
error messages.
On top of the 1-1 conversion, we start using a common error prefix for
all error messages. We also introduce a similar warning prefix which will
be used later on.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
IOMMU Notifier list is used for notifying IO address mapping changes.
Currently VFIO is the only user.
However it is possible that future consumer like vhost would like to
only listen to part of its notifications (e.g., cache invalidations).
This patch introduced IOMMUNotifier and IOMMUNotfierFlag bits for a
finer grained control of it.
IOMMUNotifier contains a bitfield for the notify consumer describing
what kind of notification it is interested in. Currently two kinds of
notifications are defined:
- IOMMU_NOTIFIER_MAP: for newly mapped entries (additions)
- IOMMU_NOTIFIER_UNMAP: for entries to be removed (cache invalidates)
When registering the IOMMU notifier, we need to specify one or multiple
types of messages to listen to.
When notifications are triggered, its type will be checked against the
notifier's type bits, and only notifiers with registered bits will be
notified.
(For any IOMMU implementation, an in-place mapping change should be
notified with an UNMAP followed by a MAP.)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
d1f6af6 "kvm-irqchip: simplify kvm_irqchip_add_msi_route" was a cleanup
of kvmchip routing configuration, that was mostly intended for x86.
However, it also contains a subtle change in behaviour which breaks EEH[1]
error recovery on certain VFIO passthrough devices on spapr guests. So far
it's only been seen on a BCM5719 NIC on a POWER8 server, but there may be
other hardware with the same problem. It's also possible there could be
circumstances where it causes a bug on x86 as well, though I don't know of
any obvious candidates.
Prior to d1f6af6, both vfio_msix_vector_do_use() and
vfio_add_kvm_msi_virq() used msg == NULL as a special flag to mark this
as the "dummy" vector used to make the host hardware state sync with the
guest expected hardware state in terms of MSI configuration.
Specifically that flag caused vfio_add_kvm_msi_virq() to become a no-op,
meaning the dummy irq would always be delivered via qemu. d1f6af6 changed
vfio_add_kvm_msi_virq() so it takes a vector number instead of the msg
parameter, and determines the correct message itself. The test for !msg
was removed, and not replaced with anything there or in the caller.
With an spapr guest which has a VFIO device, if an EEH error occurs on the
host hardware, then the device will be isolated then reset. This is a
combination of host and guest action, mediated by some EEH related
hypercalls. I haven't fully traced the mechanics, but somehow installing
the kvm irqchip route for the dummy irq on the BCM5719 means that after EEH
reset and recovery, at least some irqs are no longer delivered to the
guest.
In particular, the guest never gets the link up event, and so the NIC is
effectively dead.
[1] EEH (Enhanced Error Handling) is an IBM POWER server specific PCI-*
error reporting and recovery mechanism. The concept is somewhat
similar to PCI-E AER, but the details are different.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1373802
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Gavin Shan <gwshan@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Fixes: d1f6af6a17 ("kvm-irqchip: simplify kvm_irqchip_add_msi_route")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In the past, we are doing gsi route commit for each irqchip route
update. This is not efficient if we are updating lots of routes in the
same time. This patch removes the committing phase in
kvm_irqchip_update_msi_route(). Instead, we do explicit commit after all
routes updated.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the original MSIMessage parameter in kvm_irqchip_add_msi_route
into the vector number. Vector index provides more information than the
MSIMessage, we can retrieve the MSIMessage using the vector easily. This
will avoid fetching MSIMessage every time before adding MSI routes.
Meanwhile, the vector info will be used in the coming patches to further
enable gsi route update notifications.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU supports ARI on downstream ports and assigned devices may support
ARI in their extended capabilities. The endpoint ARI capability
specifies the next function, such that the OS doesn't need to walk
each possible function, however this next function is relative to the
host, not the guest. This leads to device discovery issues when we
combine separate functions into virtual multi-function packages in a
guest. For example, SR-IOV VFs are not enumerated by simply probing
the function address space, therefore the ARI next-function field is
zero. When we combine multiple VFs together as a multi-function
device in the guest, the guest OS identifies ARI is enabled, relies on
this next-function field, and stops looking for additional function
after the first is found.
Long term we should expose the ARI capability to the guest to enable
configurations with more than 8 functions per slot, but this requires
additional QEMU PCI infrastructure to manage the next-function field
for multiple, otherwise independent devices. In the short term,
hiding this capability allows equivalent functionality to what we
currently have on non-express chipsets.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This ioctl() call to VFIO_IOMMU_SPAPR_TCE_REMOVE was left over from an
earlier version of the code and has since been folded into
vfio_spapr_remove_window().
It wasn't caught because although the argument structure has been removed,
the libc function remove() means this didn't trigger a compile failure.
The ioctl() was also almost certain to fail silently and harmlessly with
the bogus argument, so this wasn't caught in testing.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXe4l4AAoJECgfDbjSjVRpIz4IALye7mKG61/POA4Gqmhalc3d
HnlNSZ2YcKAuvPg7WWkBuRacrQvVY/MbW1mLloG1lY0tdFgZG8Cy+CY6wJg1NE4c
cXd+77vHkIyrnl+Nil+QOgTFiAsMnD+mXHHsnCDw2jGn3JbgVNuCMi7V34fGkQd2
PDkZyYfwTqO3HytuG0/j2Somc9du1gjYdn+9qigfZVgP96jGDojBuJWuuU5flCB3
Kj5xrOuI01XlbdTk71tVjBJBektQurWr6r7GECDqZIpUfc+BI70FU9jPh+OlLTO/
92yi29ncjyStz4tRnf18xoQ8uBgH/tD1xigEUPRtnm1+0i/tgONBL8cAdBF9FBE=
=ABGE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Jul 2016 11:18:32 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (30 commits)
vmw_pvscsi: remove unnecessary internal msi state flag
e1000e: remove unnecessary internal msi state flag
vmxnet3: remove unnecessary internal msi state flag
mptsas: remove unnecessary internal msi state flag
megasas: remove unnecessary megasas_use_msi()
pci: Convert msi_init() to Error and fix callers to check it
pci bridge dev: change msi property type
megasas: change msi/msix property type
mptsas: change msi property type
intel-hda: change msi property type
usb xhci: change msi/msix property type
change pvscsi_init_msi() type to void
tests: add APIC.cphp and DSDT.cphp blobs
tests: acpi: add CPU hotplug testcase
log: Permit -dfilter 0..0xffffffffffffffff
range: Replace internal representation of Range
range: Eliminate direct Range member access
log: Clean up misuse of Range for -dfilter
pci_register_bar: cleanup
Revert "virtio-net: unbreak self announcement and guest offloads after migration"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
msi_init() reports errors with error_report(), which is wrong
when it's used in realize().
Fix by converting it to Error.
Fix its callers to handle failure instead of ignoring it.
For those callers who don't handle the failure, it might happen:
when user want msi on, but he doesn't get what he want because of
msi_init fails silently.
cc: Gerd Hoffmann <kraxel@redhat.com>
cc: John Snow <jsnow@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Jason Wang <jasowang@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Hannes Reinecke <hare@suse.de>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Alex Williamson <alex.williamson@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
