Migrating a VM during reboot sometimes results in differences
between the source and destination in the SMRAM area.
This is because migration_bitmap_sync() only fetches from KVM
the dirty log of address_space_memory. SMRAM memory slots
are ignored and the modifications to SMRAM are not sent to the
destination.
Reported-by: He Rongguang <herongguang.he@huawei.com>
Reviewed-by: He Rongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the two users don't make use of the returned offset,
beyond ensuring that the entire buffer is zero, consider the
can_use_buffer_find_nonzero_offset and buffer_find_nonzero_offset
functions internal.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-4-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Code of inet socket & unix socket is merged together.
Also add some newlines, make code block well separated.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469696074-12744-4-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Because of commit 11808bb0c4, which remove some condition checks
of 'f->ops->writev_buffer', 'qemu_put_qemu_file' should be enhanced
to clear the 'f_src->iovcnt', or 'f_src->iovcnt' may exceed the
MAX_IOV_SIZE which will break live migration. This should be fixed.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Jinshi Zhang <jinshi.c.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1470702146-24399-1-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
mmap man page:
"On success, mmap() returns a pointer to the mapped area. On error, the
value MAP_FAILED (that is, (void *) -1) is returned, and errno is set
to indicate the cause of the error."
The check in postcopy_get_tmp_page is definitely wrong and should be
fixed.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1469785705-16670-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469776231-23820-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Release the qstring allocated in qjson_new().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a migration fails/is cancelled during the postcopy stage we currently
end up with the runstate as finish-migrate, where it should be post-migrate.
There's a small window in precopy where I think the same thing can
happen, but I've never seen it.
It rarely matters; the only postcopy case is if you restart a migration, which
again is a case that rarely matters in postcopy because it's only
safe to restart the migration if you know the destination hasn't
been running (which you might if you started the destination with -S
and hadn't got around to 'c' ing it before the postcopy failed).
Even then it's a small window but potentially you could hit if
there's a problem loading the devices on the destination.
This corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=1355683
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1468601086-32117-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Currently, the output of 'info snapshots' shows fully available snapshots.
It's opaque, hides some snapshot information to users. It's not convenient
if users want to know more about all of snapshot information on every block
device via monitor.
Follow Kevin's and Max's proposals, The patch makes the output more detailed:
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
List of partial (non-loadable) snapshots on 'drive_image1':
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
Signed-off-by: Lin Ma <lma@suse.com>
Message-id: 1467869164-26688-3-git-send-email-lma@suse.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently qemu uses snapshot id to determine whether a snapshot is fully
available, It causes incorrect output in some scenario.
For instance:
(qemu) info block
drive_image1 (#block113): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk0.qcow2
(qcow2)
Cache mode: writeback
drive_image2 (#block349): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk1.qcow2
(qcow2)
Cache mode: writeback
(qemu)
(qemu) info snapshots
There is no snapshot available.
(qemu)
(qemu) snapshot_blkdev_internal drive_image1 snap1
(qemu)
(qemu) info snapshots
There is no suitable snapshot available
(qemu)
(qemu) savevm checkpoint-1
(qemu)
(qemu) info snapshots
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
(qemu)
$ qemu-img snapshot -l disk0.qcow2
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
2 checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
$ qemu-img snapshot -l disk1.qcow2
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 checkpoint-1 0 2016-05-22 16:58:07 00:02:06.813
The patch uses snapshot name instead of snapshot id to determine whether a
snapshot is fully available and uses '--' instead of snapshot id in output
because the snapshot id is not guaranteed to be the same on all images.
For instance:
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1467869164-26688-2-git-send-email-lma@suse.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move all trace-events for files in the migration/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-6-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use 'QemuMutex comp_done_lock' and 'QemuCond comp_done_cond' instead
of 'QemuMutex *comp_done_lock' and 'QemuCond comp_done_cond'. To keep
consistent with 'QemuMutex decomp_done_lock' and
'QemuCond comp_done_cond'.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-10-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The current code for multi-thread decompression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-9-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The current code for multi-thread compression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-8-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
quit_comp_thread and quit_decomp_thread are accessed by several
thread, it's better to protect them with locks. We use a per
thread flag to replace the global one, and the new flag is protected
by a lock.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-7-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Use qemu_put_compression_data to do the compression directly
instead of using do_compress_ram_page, avoid some data copy.
very small improvement, at the same time, add code to check
if the compression is successful.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-6-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Current qemu_put_compression_data can only work with no writable
QEMUFile, and can't work with the writable QEMUFile. But it does
not provide any measure to prevent users from using it with a
writable QEMUFile.
We should fix this flaw to make it works with writable QEMUFile.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-5-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
page_buffer is set twice repeatedly, remove the previous set.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-4-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
At the end of live migration and before vm_start() on the destination
side, we should make sure all the decompression tasks are finished, if
this can not be guaranteed, the VM may get the incorrect memory data,
or the updated memory may be overwritten by the decompression thread.
Add the code to fix this potential issue.
Suggested-by: David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-3-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Recently, a bug related to multiple thread compression feature for
live migration is reported. The destination side will be blocked
during live migration if there are heavy workload in host and
memory intensive workload in guest, this is most likely to happen
when there is one decompression thread.
Some parts of the decompression code are incorrect:
1. The main thread receives data from source side will enter a busy
loop to wait for a free decompression thread.
2. A lock is needed to protect the decomp_param[idx]->start, because
it is checked in the main thread and is updated in the decompression
thread.
Fix these two issues by following the code pattern for compression.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The following sequence of operations fails:
virsh start vm
virsh snapshot-create vm
virshh save vm --file file
with the following error
error: Failed to save domain vm to file
error: internal error: unable to execute QEMU command 'migrate':
There's a migration process in progress
The problem is that qemu_savevm_state() calls migrate_init() which sets
migration state to MIGRATION_STATUS_SETUP and never cleaned it up.
This patch do the job.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1466003203-26263-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
A couple of improvements to tracing that have come out of helping
people with migration problems:
* vmstate_n_elems trace the count/name - for when you have problems
getting array counts right
* vmstate_subsection_load_bad - add the idstr, for when you receive a
subsection you weren't expecting.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465896986-16132-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The *_to_cpup() and cpu_to_*w() functions just compose a pointer
dereference with a byteswap. Instead use ld*_p() and st*_p(),
which handle potential pointer misalignment and avoid the need
to cast the pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1465574962-2710-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apply the following renames for starting incoming migration:
process_incoming_migration -> migration_fd_process_incoming
migration_set_incoming_channel -> migration_channel_process_incoming
migration_tls_set_incoming_channel -> migration_tls_channel_process_incoming
and for starting outgoing migration:
migration_set_outgoing_channel -> migration_channel_connect
migration_tls_set_outgoing_channel -> migration_tls_channel_connect
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1464776234-9910-3-git-send-email-berrange@redhat.com
Message-Id: <1464776234-9910-3-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Knowing whether the destination host supports migration with
postcopy can be tricky.
The destination doesn't need the capability set, however
if we set it then use the opportunity to do the test and
tell the user/management layer early.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1465816605-29488-7-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-7-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
On the source, add a count of page requests received from the
destination.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The RAM section of qmp_query_migrate is reasonably complex
and repeated 3 times. Split it out into a helper.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1465816605-29488-3-git-send-email-dgilbert@redhat.com
Reviwed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1465816605-29488-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The discard code in migration/ram.c would send request for
zero length discards in the case where no discards were needed.
It doesn't appear to have had any bad effect.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Introduce a "xen-load-devices-state" QAPI command that can be used to
load the state of all devices, but not the RAM or the block devices of
the VM.
We only have hmp commands savevm/loadvm, and qmp commands
xen-save-devices-state.
We use this new command for COLO:
1. suspend both primary vm and secondary vm
2. sync the state
3. resume both primary vm and secondary vm
In such case, we need to update all devices' state in any time.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
This creates a new BlockBackend for copying data from an images to the
migration stream on the source host. All I/O for block migration goes
through BlockBackend now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This converts the loading part of block migration to use BlockBackend
interfaces rather than accessing the BlockDriverState directly.
Note that this takes a lazy shortcut. We should really use a separate
BlockBackend that is configured for the migration rather than for the
guest (e.g. writethrough caching is unnecessary) and holds its own
reference to the BlockDriverState, but the impact isn't that big and we
didn't have a separate migration reference before either, so it must be
good enough, I guess...
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename to bdrv_pwrite_zeroes() to let the compiler ensure we
cater to the updated semantics. Do the same for bdrv_co_write_zeroes().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Of the two callers, one does not use it, and the other can compute
it itself based on the other output argument (offset) and the RAMBlock.
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=AYEK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-2' into staging
migration: add TLS support to the migration data channel
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
# gpg: Signature made Thu 26 May 2016 07:07:08 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-2.7-2: (28 commits)
migration: remove qemu_get_fd method from QEMUFile
migration: remove support for non-iovec based write handlers
migration: add support for encrypting data with TLS
migration: define 'tls-creds' and 'tls-hostname' migration parameters
migration: don't use an array for storing migrate parameters
migration: move definition of struct QEMUFile back into qemu-file.c
migration: delete QEMUFile stdio implementation
migration: delete QEMUFile sockets implementation
migration: delete QEMUSizedBuffer struct
migration: delete QEMUFile buffer implementation
migration: convert savevm to use QIOChannel for writing to files
migration: convert RDMA to use QIOChannel interface
migration: convert exec socket protocol to use QIOChannel
migration: convert fd socket protocol to use QIOChannel
migration: convert tcp socket protocol to use QIOChannel
migration: rename unix.c to socket.c
migration: convert unix socket protocol to use QIOChannel
migration: convert post-copy to use QIOChannelBuffer
migration: add reporting of errors for outgoing migration
migration: add helpers for creating QEMUFile from a QIOChannel
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that there is a set_blocking callback in QEMUFileOps,
and all users needing non-blocking support have been
converted to QIOChannel, there is no longer any codepath
requiring the qemu_get_fd() method for QEMUFile. Remove it
to avoid further code being introduced with an expectation
of direct file handle access.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-29-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
All the remaining QEMUFile implementations provide an iovec
based write handler, so the put_buffer callback can be removed
to simplify the code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-28-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This extends the migration_set_incoming_channel and
migration_set_outgoing_channel methods so that they
will automatically wrap the QIOChannel in a
QIOChannelTLS instance if TLS credentials are configured
in the migration parameters.
This allows TLS to work for tcp, unix, fd and exec
migration protocols. It does not (currently) work for
RDMA since it does not use these APIs, but it is
unlikely that TLS would be desired with RDMA anyway
since it would degrade the performance to that seen
with TCP defeating the purpose of using RDMA.
On the target host, QEMU would be launched with a set
of TLS credentials for a server endpoint
$ qemu-system-x86_64 -monitor stdio -incoming defer \
-object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=server,id=tls0 \
...other args...
To enable incoming TLS migration 2 monitor commands are
then used
(qemu) migrate_set_str_parameter tls-creds tls0
(qemu) migrate_incoming tcp:myhostname:9000
On the source host, QEMU is launched in a similar
manner but using client endpoint credentials
$ qemu-system-x86_64 -monitor stdio \
-object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=client,id=tls0 \
...other args...
To enable outgoing TLS migration 2 monitor commands are
then used
(qemu) migrate_set_str_parameter tls-creds tls0
(qemu) migrate tcp:otherhostname:9000
Thanks to earlier improvements to error reporting,
TLS errors can be seen 'info migrate' when doing a
detached migration. For example:
(qemu) info migrate
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
Migration status: failed
total time: 0 milliseconds
error description: TLS handshake failed: The TLS connection was non-properly terminated.
Or
(qemu) info migrate
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
Migration status: failed
total time: 0 milliseconds
error description: Certificate does not match the hostname localhost
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-27-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Define two new migration parameters to be used with TLS encryption.
The 'tls-creds' parameter provides the ID of an instance of the
'tls-creds' object type, or rather a subclass such as 'tls-creds-x509'.
Providing these credentials will enable use of TLS on the migration
data stream.
If using x509 certificates, together with a migration URI that does
not include a hostname, the 'tls-hostname' parameter provides the
hostname to use when verifying the server's x509 certificate. This
allows TLS to be used in combination with fd: and exec: protocols
where a TCP connection is established by a 3rd party outside of
QEMU.
NB, this requires changing the migrate_set_parameter method in the
HMP to accept a 's' (string) value instead of 'i' (integer). This
is backwards compatible, because the parsing of strings allows the
quotes to be optional, thus any integer is also a valid string.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-26-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The MigrateState struct uses an array for storing migration
parameters. This presumes that all future parameters will
be integers too, which is not going to be the case. There
is no functional reason why an array is used, if anything
it makes the code less clear. The QAPI schema already
defines a struct - MigrationParameters - capable of storing
all the individual parameters, so just use that instead of
an array.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-25-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that the memory buffer based QEMUFile impl is gone, there
is no need for any backend to be accessing internals of the
QEMUFile struct, so it can be moved back into qemu-file.c
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-24-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that the exec migration backend and savevm have converted
to use the QIOChannel based QEMUFile, there is no user remaining
for the stdio based QEMUFile impl and it can be deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-23-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that the tcp, unix and fd migration backends have converted
to use the QIOChannel based QEMUFile, there is no user remaining
for the sockets based QEMUFile impl and it can be deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-22-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that we don't have have a buffer based QemuFile
implementation, the QEMUSizedBuffer code is also
unused and can be deleted. A simpler buffer class
also exists in util/buffer.c which other code can
used as needed.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-21-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The qemu_bufopen() method is no longer used, so the memory
buffer based QEMUFile backend can be deleted entirely.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-20-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Convert the exec savevm code to use QIOChannel and QEMUFileChannel,
instead of the stdio APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-19-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This converts the RDMA code to provide a subclass of QIOChannel
that uses RDMA for the data transport.
This implementation of RDMA does not correctly handle non-blocking
mode. Reads might block if there was not already some pending data
and writes will block until all data is sent. This flawed behaviour
was already present in the existing impl, so appears to not be a
critical problem at this time. It should be on the list of things
to fix in the future though.
The RDMA code would be much better off it it could be split up in
a generic RDMA layer, a QIOChannel impl based on RMDA, and then
the RMDA migration glue. This is left as a future exercise for
the brave.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-18-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
