This only has a fix for ipv4-after-ipv6 booting problem.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's my next pull request for qemu-4.1. I'm not sure if this will
squeak in just before the soft freeze, or just after. I don't think
it really matters - most of this is bugfixes anyway. There's some
cleanups which aren't stictly bugfixes, but which I think are safe
enough improvements to go in the soft freeze. There's no true feature
work.
Unfortunately, I wasn't able to complete a few of my standard battery
of pre-pull tests, due to some failures that appear to also be in
master. I'm hoping that hasn't missed anything important in here.
Highlights are:
* A number of fixe and cleanups for the XIVE implementation
* Cleanups to the XICS interrupt controller to fit better with the new
XIVE code
* Numerous fixes and improvements to TCG handling of ppc vector
instructions
* Remove a number of unnnecessary #ifdef CONFIG_KVM guards
* Fix some errors in the PCI hotplug paths
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----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=QAyU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190702' into staging
ppc patch queue 2019-07-2
Here's my next pull request for qemu-4.1. I'm not sure if this will
squeak in just before the soft freeze, or just after. I don't think
it really matters - most of this is bugfixes anyway. There's some
cleanups which aren't stictly bugfixes, but which I think are safe
enough improvements to go in the soft freeze. There's no true feature
work.
Unfortunately, I wasn't able to complete a few of my standard battery
of pre-pull tests, due to some failures that appear to also be in
master. I'm hoping that hasn't missed anything important in here.
Highlights are:
* A number of fixe and cleanups for the XIVE implementation
* Cleanups to the XICS interrupt controller to fit better with the new
XIVE code
* Numerous fixes and improvements to TCG handling of ppc vector
instructions
* Remove a number of unnnecessary #ifdef CONFIG_KVM guards
* Fix some errors in the PCI hotplug paths
* Assorted other fixes
# gpg: Signature made Tue 02 Jul 2019 07:07:15 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190702: (49 commits)
spapr/xive: Add proper rollback to kvmppc_xive_connect()
ppc/xive: Fix TM_PULL_POOL_CTX special operation
ppc/pnv: Rework cache watch model of PnvXIVE
ppc/xive: Make the PIPR register readonly
ppc/xive: Force the Physical CAM line value to group mode
spapr/xive: simplify spapr_irq_init_device() to remove the emulated init
spapr/xive: rework the mapping the KVM memory regions
spapr_pci: Unregister listeners before destroying the IOMMU address space
target/ppc: improve VSX_FMADD with new GEN_VSX_HELPER_VSX_MADD macro
target/ppc: decode target register in VSX_EXTRACT_INSERT at translation time
target/ppc: decode target register in VSX_VECTOR_LOAD_STORE_LENGTH at translation time
target/ppc: introduce GEN_VSX_HELPER_R2_AB macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_R2 macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_R3 macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_X1 macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_X2_AB macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_X2 macro to fpu_helper.c
target/ppc: introduce separate generator and helper for xscvqpdp
target/ppc: introduce GEN_VSX_HELPER_X3 macro to fpu_helper.c
target/ppc: introduce separate VSX_CMP macro for xvcmp* instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment the rtas's Makefile uses generic QEMU rules which means
that when QEMU is compiled on a little endian system, the spapr-rtas.bin
is compiled as little endian too which is incorrect as it is always
executed in big endian mode.
This enforces -mbig by defining %.o:%.S rule as spapr-rtas.bin is
a standalone guest binary which should not depend on QEMU flags anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190612020723.96802-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Built from master (commit 6e56ed129c9782ba050a5fbfbf4ac12335b230f7),
which has ati vgabios support merged (checkout master branch in
roms/seabios submodule, then run "make -C roms seavgabios-ati").
Temporary exception until the next seabios major version is
released (probably 1.13, fall 2019).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620151104.2678-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Refresh the "pc-bios/README" file with edk2, OpenSSL, and Berkeley
SoftFloat release info, matching the edk2-stable201905 firmware images
added in the previous patch.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Rebuild the pc-bios/edk2-*.fd.bz2 binaries, and regenerate
pc-bios/edk2-licenses.txt, based on the edk2-stable201905 release.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Newer versions of zipl have the ability to write signature entries to the boot
script for secure boot. We don't yet support secure boot, but we need to skip
over signature entries while reading the boot script in order to maintain our
ability to boot guest operating systems that have a secure bootloader.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1556543381-12671-1-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
atoui() and get_index() pass char values to isdigit(). With a
standard isdigit(), we'd get undefined behavior when the value is
negative. Can't happen as char is unsigned on s390x. Even if it
ould, we're actually using isdigit() from pc-bios/s390-ccw/libc.h
here, which works fine for negative values. Clean up anyway, just
to avoid setting a bad example.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190418145355.21100-6-armbru@redhat.com>
[thuth: updated the commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tJvv
-----END PGP SIGNATURE-----
Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging
Support for booting from a vfio-ccw passthrough dasd device
# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
* tag 's390-ccw-bios-2019-04-12':
pc-bios/s390: Update firmware images
s390-bios: Use control unit type to find bootable devices
s390-bios: Support booting from real dasd device
s390-bios: Add channel command codes/structs needed for dasd-ipl
s390-bios: Use control unit type to determine boot method
s390-bios: Refactor virtio to run channel programs via cio
s390-bios: Factor finding boot device out of virtio code path
s390-bios: Extend find_dev() for non-virtio devices
s390-bios: cio error handling
s390-bios: Support for running format-0/1 channel programs
s390-bios: ptr2u32 and u32toptr
s390-bios: Map low core memory
s390-bios: Decouple channel i/o logic from virtio
s390-bios: Clean up cio.h
s390-bios: decouple common boot logic from virtio
s390-bios: decouple cio setup from virtio
s390 vfio-ccw: Add bootindex property and IPLB data
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Update the README file with information on the images added previously,
and provide firmware descriptor documents that conform to
"docs/interop/firmware.json".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add the files built by the last patch: (compressed) binaries, and the
cumulative license text that covers them.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
s390-ccw.img contains support for booting from vfio-ccw dasd passthrough
devices now, and s390-netboot.img is updated since there were changes
to the code that is shared between s390-ccw.img and s390-netboot.img.
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the user does not specify which device to boot from then we end
up guessing. Instead of simply grabbing the first available device let's
be a little bit smarter and only choose devices that might be bootable
like disk, and not console devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1554388475-18329-17-git-send-email-jjherne@linux.ibm.com>
[thuth: Added fix for virtio_is_supported() not being called anymore]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allows guest to boot from a vfio configured real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-16-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The dasd IPL procedure needs to execute a few previously unused
channel commands. Let's define them and their associated data
structures.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-15-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The boot method is different depending on which device type we are
booting from. Let's examine the control unit type to determine if we're
a virtio device. We'll eventually add a case to check for a real dasd device
here as well.
Since we have to call enable_subchannel() in main now, might as well
remove that call from virtio.c : run_ccw(). This requires adding some
additional enable_subchannel calls to not break calls to
virtio_is_supported().
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-14-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we have a Channel I/O library let's modify virtio boot code to
make use of it for running channel programs.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-13-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make a new routine find_boot_device to locate the boot device for all
cases, not just virtio.
The error message for the case where no boot device has been specified
and a suitable boot device cannot be auto detected was specific to
virtio devices. We update this message to remove virtio specific wording.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-12-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need a method for finding the subchannel of a dasd device. Let's
modify find_dev to handle this since it mostly does what we need. Up to
this point find_dev has been specific to only virtio devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-11-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add verbose error output for when unexpected i/o errors happen. This eases the
burden of debugging and reporting i/o errors. No error information is printed
in the success case, here is an example of what is output on error:
cio device error
ssid : 0x0000000000000000
cssid : 0x0000000000000000
sch_no: 0x0000000000000000
Interrupt Response Block Data:
Function Ctrl : [Start]
Activity Ctrl : [Start-Pending]
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status : [Unit-Check]
Channel Status :
cpa=: 0x000000007f8d6038
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
Eckd Dasd Sense Data (fmt 32-bytes):
Sense Condition Flags :
Residual Count =: 0x0000000000000000
Phys Drive ID =: 0x000000000000009e
low cyl address =: 0x0000000000000000
head addr & hi cyl =: 0x0000000000000000
format/message =: 0x0000000000000008
fmt-dependent[0-7] =: 0x0000000000000004
fmt-dependent[8-15]=: 0xe561282305082fff
prog action code =: 0x0000000000000016
Configuration info =: 0x00000000000040e0
mcode / hi-cyl =: 0x0000000000000000
cyl & head addr [0]=: 0x0000000000000000
cyl & head addr [1]=: 0x0000000000000000
cyl & head addr [2]=: 0x0000000000000000
The Sense Data section is currently only printed for ECKD DASD.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-10-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce a library function for executing format-0 and format-1
channel programs and waiting for their completion before continuing
execution.
Add cu_type() to channel io library. This will be used to query control
unit type which is used to determine if we are booting a virtio device or a
real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1554388475-18329-9-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce inline functions to convert between pointers and unsigned 32-bit
ints. These are used to hide the ugliness required to avoid compiler
warnings.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-8-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a new header for basic architecture specific definitions and add a
mapping of low core memory. This mapping will be used by the real dasd boot
process.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-7-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a separate library for channel i/o related code. This decouples
channel i/o operations from virtio and allows us to make use of them for
the real dasd boot path.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-6-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add proper typedefs to all structs and modify all bit fields to use consistent
formatting.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-5-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a boot_setup function to handle getting boot information from
the machine/hypervisor. This decouples common boot logic from the
virtio code path and allows us to make use of it for the real dasd boot
scenario.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-4-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move channel i/o setup code out to a separate function. This decouples cio
setup from the virtio code path and allows us to make use of it for booting
dasd devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-3-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Report machine checks to the kernel.
It is now using these for probing missing devices.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pick up the config updates. Also add a few keys to the maps which
got a QKeyCode assigned since the last time we generated the maps
(Hiragana_Katakana, Muhenkan). Sync with xkbcommon updates.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190315110248.29208-3-kraxel@redhat.com
The reverse keymap code can't handle dead keys. So use the nodeadkeys
variant of the keyboard layout for the german and french maps.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190315110248.29208-2-kraxel@redhat.com
This patch fixes two issues in the hppa/parisc emulation:
1. The CPU HPA was wrong in the sense that we had negative module
offsets in the firmware-internal module table (which we ignored up to
now). Get it correct by changing the CPU HPA to 0xfffb0000 which is
greater than the DINO_HPA of 0xfff80000.
This change requires the seabios-firmware update.
2. Sven noticed that the FPU register cr10 is only able to reference up
to 8 FPUs, so let's reduce the maximum amount of SMP CPUs too.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20190315164130.GA7800@ls3530>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quite a while has passed since we last updated U-Boot for e500. This patch
bumps it to the last released version 2019.01 to make sure users don't feel
like they're using out of date software.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20190304103930.16319-1-agraf@csgraf.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
some versions of HP-UX 10.20 seems to rely on the fact that DINO
strips out the lower 2 bits of the PCI configuration address.
Also update the binary SeaBIOS distributed to the latest version
from Helge's repository, which is required with that change.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190218183314.20157-1-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If we found initrd through fw_cfg, we can load it and use the
first module of hvm_start_info to pass initrd address and size
to the kernel.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new pvh.bin option rom can be used with SeaBIOS to boot
uncompressed kernel using the x86/HVM direct boot ABI.
pvh.S contains the entry point of the option rom. It runs
in real mode, loads the e820 table querying the BIOS, and
then it switches to 32bit protected mode and jumps to the
pvh_load_kernel() written in pvh_main.c.
pvh_load_kernel() loads the cmdline and kernel entry_point
using fw_cfg, then it looks for RSDP, fills the
hvm_start_info required by x86/HVM ABI, and finally jumps
to the kernel entry_point.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
In order to allow other option roms to use these common
useful functions and definitions, this patch put them
in two new C header files called optrom.h and
optrom_fw_cfg.h. We also add useful out*() in*()
functions for different size, and new fw_cfg functions
to use when DMA feature is not available.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
FW_CFG_DMA_CTL_* bits and struct fw_cfg_dma_access are
defined in the qemu_fw_cfg.h header file already included
in linuxboot_dma.c, so we can remove the definition of
BIOS_CFG_DMA_CTL_* and struct FWCfgDmaAccess.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This update to qemu_vga.ndrv includes the following changes:
- Build guest resolution list from QEMU EDID data if enabled
- Fixes to re-enable 256 color mode
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This includes spapr-vio and usb-storage fixes, phandles fix for NVLink2
pass through support and other compile improvements.
The full list of changes is:
* vio-vscsi: Support multiple channels / buses
* board-qemu/slof/vio-vscsi: Scan up to 64 SCSI IDs
* usb/storage: Implement block write support
* usb/storage: Invert the logic of the IF-statements
* fdt: Fix phandles for NVLink/NVLink2
* fdt: Factor out code to replace a phandle in place
* pci: use appropriate base class ids
* Makefile: Set a proper DRIVER_NAME when building from a git tree
* romfs/tools: Silence more compiler warnings with GCC 8.1
* romfs/tools: Silence GCC 8.1 compiler warning with FLASHFS_MAGIC
* romfs/tools: Remove superfluous union around the rom header struct
* make.rules: Compile SLOF with -fno-asynchronous-unwind-tables
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
