Linux writes zeroes at bootup into the default ports for LASI audio and
LASI floppy controller to reset those devices. Allow writing to those
registers to avoid HPMCs.
Signed-off-by: Helge Deller <deller@gmx.de>
Add the do_transaction_failed() handler to tigger a HPMC to the CPU
in case of I/O transaction errors.
This is a preparation commit.
We still lack implementation for some registers, so do not yet enable sending
HPMCs. Having this hunk here now nevertheless helps for the further
development, so that it can easily be enabled later on.
Signed-off-by: Helge Deller <deller@gmx.de>
Firmware and qemu reads and writes the MAC address for the LASI LAN via
registers in LASI. Allow those accesses and return zero even if LASI
LAN isn't enabled to avoid HPMCs (=crashes).
Signed-off-by: Helge Deller <deller@gmx.de>
The Astro/Elroy chip can work in either Hard-Fail or Soft-Fail mode.
Hard fail means the system bus will send an HPMC (=crash) to the
processor, soft fail means the system bus will ignore timeouts of
MMIO-reads or MMIO-writes and return -1ULL.
The HF mode is controlled by a bit in the status register and is usually
programmed by the OS. Return the corresponing values based on the current
value of that bit.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Instead of stopping the emulation, report a MEMTX_DECODE_ERROR if the OS
tries to access non-existent registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For debugging purposes at the early stage of the bootup process,
the SeaBIOS-hppa firmware sometimes needs to output characters to the
serial console. Note that the serial console is the default output
method for parisc machines.
At this stage PCI busses and other devices haven't been initialized
yet. So, SeaBIOS-hppa will not be able to find the correct I/O ports
for the serial ports yet.
Instead, add an emulation for the "diag 0x101" opcode to assist here.
Without any other dependencies, SeaBIOS-hppa can then load the character
to be printed in register %r26 and issue the diag assembly instruction.
The qemu diag_console_output() helper function will then print
that character to the first serial port.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The upcoming syscall catchpoint support needs to get control on syscall
entry and return. Provide the necessary hooks for that, which are
no-ops for now.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240202152506.279476-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-13-alex.bennee@linaro.org>
The upcoming syscall catchpoint support needs to send stop packets with
an associated reason to GDB. Add an extra parameter to gdb_handlesig()
for that, and rename it to gdb_handlesig_reason(). Provide a
compatibility wrapper with an old name.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240202152506.279476-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-12-alex.bennee@linaro.org>
The upcoming syscall catchpoint support needs to send SIGTRAP stop
packets to GDB. Being able to compile this support only once for all
targets is a good thing, and it requires hiding TARGET_SIGTRAP behind
a function call.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240202152506.279476-2-iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-11-alex.bennee@linaro.org>
Just like all other dependencies, these can be expressed in Kconfig
files rather than in the default configurations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240129115809.1039924-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-10-alex.bennee@linaro.org>
This regressed qemu-system-xtensa:
TEST test_load_store on xtensa
qemu-system-xtensa: Some ROM regions are overlapping
These ROM regions might have been loaded by direct user request or by default.
They could be BIOS/firmware images, a guest kernel, initrd or some other file loaded into guest memory.
Check whether you intended to load all this guest code, and whether it has been built to load to the correct addresses.
The following two regions overlap (in the memory address space):
test_load_store ELF program header segment 1 (addresses 0x0000000000001000 - 0x0000000000001f26)
test_load_store ELF program header segment 2 (addresses 0x0000000000001ab8 - 0x0000000000001ab8)
make[1]: *** [Makefile:187: run-test_load_store] Error 1
This reverts commit 62570f1434.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-5-alex.bennee@linaro.org>
Commit 39fb3cfc28 ("configure: clean up plugin option handling", 2023-10-18)
dropped the CONFIG_PLUGIN line from tests/tcg/config-host.mak, due to confusion
caused by the shadowing of $config_host_mak. However, TCG tests were still
expecting it. Oops.
Put it back, in the meanwhile the shadowing is gone so it's clear that it goes
in the tests/tcg configuration.
Cc: <alex.bennee@linaro.org>
Fixes: 39fb3cfc28 ("configure: clean up plugin option handling", 2023-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240124115332.612162-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-4-alex.bennee@linaro.org>
This might be premature but while streamlining the avocado tests I
realised the only tests we have are "check-tcg" ones. The ageing
fedora-cris-cross image works well enough for developers but can't be
used in CI as we need supported build platforms to build QEMU.
Does this mean the writing is on the wall for this architecture?
Cc: Rabin Vincent <rabinv@axis.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-3-alex.bennee@linaro.org>
Avocado needs sqlite3:
Failed to load plugin from module "avocado.plugins.journal":
ImportError("Module 'sqlite3' is not installed.
Use: sudo zypper install python311 to install it")
>From 'zypper info python311':
"This package supplies rich command line features provided by
readline, and sqlite3 support for the interpreter core, thus forming
a so called "extended" runtime."
Include the appropriate package in the lcitool mappings which will
guarantee the dockerfile gets properly updated when lcitool is
run. Also include the updated dockerfile.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240117164227.32143-1-farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-2-alex.bennee@linaro.org>
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
-----BEGIN PGP SIGNATURE-----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=yuRM
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.0
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmXGBRAACgkQr3yVEwxT
# gBPqVA//etMiwP8+lQb2E4pw+QwBIzpm3qFyBlqgSCFrekj1u2kYNd4CH3CKurWE
# ysoQ6OAMeb0MUbRHdjrejjzD/wOg7JNA9h7ynM1VbupveBrJY3GWC6qQWSG+A1j/
# LSgmr/dDya74chDxjxa+7ld3xqloHi5OtdGaeORfdPXl7mjCCKKCoSKYCex1ykup
# uuB7bsjeWeWEbuUsntmeuHJLZJuhpnbuZJmp17tEo+3vWXqjxV00Lik+XMwh3gua
# KOLiAqHjGr2NEhA3Mg1JLcQ+6JLTDM9ugZpQeNGQwMkfuB/RAU7jO/1Di3flbadF
# 8l2xOHu3mydDbfdxTGZNJjcIrMTX/YEewAYZLRYpNsyPOMntgq8HEegwCdWGvK7C
# M5Tc59MNSuBt+zkZkHd21qLYusa2ThP4YT/schh7IA+2F1TSKdhlptEzi2oebIc7
# ilLSgZ9Of72QlAH2OPJNSAL9Nbc06MHEM0JiHIJa5u+XdcVRhZus5h1YIOKXisqF
# YPP22RnI5Jj5d5csa/0ONAZGFh5SRMTJtpjKoKSkzoYJWDjCQ2MiUAOmLscchMZd
# wbK0vjeRf6kRG4U4z7nTmHS9kzH8RXUZDecVcOITuMpKih9LhUiCZ+xPunFYPycJ
# WNFa9/pENcCXJweXvtk4NHwx933rX56678lF6KY2hwUwwaiBOv4=
# =yuRM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 10:57:20 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu: (61 commits)
target/riscv: add rv32i, rv32e and rv64e CPUs
target/riscv/cpu.c: add riscv_bare_cpu_init()
target/riscv: Enable xtheadsync under user mode
qemu-options: enable -smbios option on RISC-V
target/riscv: SMBIOS support for RISC-V virt machine
smbios: function to set default processor family
smbios: add processor-family option
target/riscv: support new isa extension detection devicetree properties
target/riscv: use misa_mxl_max to populate isa string rather than TARGET_LONG_BITS
target/riscv: Expose Zaamo and Zalrsc extensions
target/riscv: Check 'A' and split extensions for atomic instructions
target/riscv: Add Zaamo and Zalrsc extension infrastructure
hw/riscv/virt.c: use g_autofree in create_fdt_*
hw/riscv/virt.c: use g_autofree in virt_machine_init()
hw/riscv/virt.c: use g_autofree in create_fdt_virtio()
hw/riscv/virt.c: use g_autofree in create_fdt_sockets()
hw/riscv/virt.c: use g_autofree in create_fdt_socket_cpus()
hw/riscv/numa.c: use g_autofree in socket_fdt_write_distance_matrix()
hw/riscv/virt-acpi-build.c: fix leak in build_rhct()
target/riscv: Use RISCVException as return type for all csr ops
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also, add a section to the MAINTAINERS file for detached
LUKS header, it only has a test case in it currently.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When querying the LUKS disk with the qemu-img tool or other APIs,
add information about whether the LUKS header is detached.
Additionally, update the test case with the appropriate
modification.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Even though a LUKS header might be created with cryptsetup,
qemu-img should be enhanced to accommodate it as well.
Add the 'detached-header' option to specify the creation of
a detached LUKS header. This is how it is used:
$ qemu-img create --object secret,id=sec0,data=abc123 -f luks
> -o cipher-alg=aes-256,cipher-mode=xts -o key-secret=sec0
> -o detached-header=true header.luks
Using qemu-img or cryptsetup tools to query information of
an LUKS header image as follows:
Assume a detached LUKS header image has been created by:
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
Header image information could be queried using cryptsetup:
$ cryptsetup luksDump test-header.img
or qemu-img:
$ qemu-img info 'json:{"driver":"luks","file":{"filename":
> "test-payload.img"},"header":{"filename":"test-header.img"}}'
When using qemu-img, keep in mind that the entire disk
information specified by the JSON-format string above must be
supplied on the commandline; if not, an overlay check will reveal
a problem with the LUKS volume check logic.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[changed to pass 'cflags' to block_crypto_co_create_generic]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, enable the ability to choose the block device containing
a detachable LUKS header by adding the 'header' parameter to
BlockdevCreateOptionsLUKS.
Secondly, when formatting the LUKS volume with a detachable header,
truncate the payload volume to length without a header size.
Using the qmp blockdev command, create the LUKS volume with a
detachable header as follows:
1. add the secret to lock/unlock the cipher stored in the
detached LUKS header
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type": "secret", "id": "sec0", "data": "foo"}}'
2. create a header img with 0 size
$ virsh qemu-monitor-command vm '{"execute":"blockdev-create",
> "arguments":{"job-id":"job0", "options":{"driver":"file",
> "filename":"/path/to/detached_luks_header.img", "size":0 }}}'
3. add protocol blockdev node for header
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments": {"driver":"file", "filename":
> "/path/to/detached_luks_header.img", "node-name":
> "detached-luks-header-storage"}}'
4. create a payload img with 0 size
$ virsh qemu-monitor-command vm '{"execute":"blockdev-create",
> "arguments":{"job-id":"job1", "options":{"driver":"file",
> "filename":"/path/to/detached_luks_payload_raw.img", "size":0}}}'
5. add protocol blockdev node for payload
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments": {"driver":"file", "filename":
> "/path/to/detached_luks_payload_raw.img", "node-name":
> "luks-payload-raw-storage"}}'
6. do the formatting with 128M size
$ virsh qemu-monitor-command c81_node1 '{"execute":"blockdev-create",
> "arguments":{"job-id":"job2", "options":{"driver":"luks", "header":
> "detached-luks-header-storage", "file":"luks-payload-raw-storage",
> "size":134217728, "preallocation":"full", "key-secret":"sec0" }}}'
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Expand the signature of qcrypto_block_create to enable the
formation of LUKS volumes with detachable headers. To accomplish
that, introduce QCryptoBlockCreateFlags to instruct the creation
process to set the payload_offset_sector to 0.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To support detached LUKS header creation, make the existing 'file'
field in BlockdevCreateOptionsLUKS optional.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By enhancing the LUKS driver, it is possible to implement
the LUKS volume with a detached header.
Normally a LUKS volume has a layout:
disk: | header | key material | disk payload data |
With a detached LUKS header, you need 2 disks so getting:
disk1: | header | key material |
disk2: | disk payload data |
There are a variety of benefits to doing this:
* Secrecy - the disk2 cannot be identified as containing LUKS
volume since there's no header
* Control - if access to the disk1 is restricted, then even
if someone has access to disk2 they can't unlock
it. Might be useful if you have disks on NFS but
want to restrict which host can launch a VM
instance from it, by dynamically providing access
to the header to a designated host
* Flexibility - your application data volume may be a given
size and it is inconvenient to resize it to
add encryption.You can store the LUKS header
separately and use the existing storage
volume for payload
* Recovery - corruption of a bit in the header may make the
entire payload inaccessible. It might be
convenient to take backups of the header. If
your primary disk header becomes corrupt, you
can unlock the data still by pointing to the
backup detached header
Take the raw-format image as an example to introduce the usage
of the LUKS volume with a detached header:
1. prepare detached LUKS header images
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
2. block-add a protocol blockdev node of payload image
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-storage", "driver":"file",
> "filename":"test-payload.img"}}'
3. block-add a protocol blockdev node of LUKS header as above.
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-storage", "driver":"file",
> "filename": "test-header.img" }}'
4. object-add the secret for decrypting the cipher stored in
LUKS header above
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type":"secret", "id":
> "libvirt-2-storage-secret0", "data":"abc123"}}'
5. block-add the raw-drived blockdev format node
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-format", "driver":"raw",
> "file":"libvirt-1-storage"}}'
6. block-add the luks-drived blockdev to link the raw disk
with the LUKS header by specifying the field "header"
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-format", "driver":"luks",
> "file":"libvirt-1-format", "header":"libvirt-2-storage",
> "key-secret":"libvirt-2-format-secret0"}}'
7. hot-plug the virtio-blk device finally
$ virsh qemu-monitor-command vm '{"execute":"device_add",
> "arguments": {"num-queues":"1", "driver":"virtio-blk-pci",
> "drive": "libvirt-2-format", "id":"virtio-disk2"}}'
Starting a VM with a LUKS volume with detached header is
somewhat similar to hot-plug in that both maintaining the
same json command while the starting VM changes the
"blockdev-add/device_add" parameters to "blockdev/device".
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The chardev socket backend will unref the QIOChannel object while
it is still potentially open. When using TLS there could be a
pending TLS handshake taking place. If the channel is left open
then when the TLS handshake callback runs, it can end up accessing
free'd memory in the tcp_chr_tls_handshake method.
Closing the QIOChannel will unregister any pending handshake
source.
Reported-by: jiangyegen <jiangyegen@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This picks up the new EPYC-Genoa, SapphireRapids & GraniteRapids CPUs,
removes the now deleted Icelake-Client CPU, and adds the newer versions
of many existing CPUs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'header-rows' directive indicates how many rows in the generated
table are to be highlighted as headers. We only have one such row in
the CSV file included. This removes the accident bold highlighting
of the 'i486' CPU model.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The RST doc include can't be made to skip the comment indicating the CPU
CSV file is auto-generated when importing it. This comment line was
previously manually removed from the generated output that was committed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For a long time now, libvirt has pre-created the monitor connection
socket and passed the pre-opened FD into QEMU during startup. Thus
libvirt does not have any timeouts waiting for the monitor socket
to appear, it is immediately connected.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Each VNC feature enum entry has a corresponding _MASK constant
which is the bit-shifted value. It is very easy for contributors
to accidentally use the _MASK constant, instead of the non-_MASK
constant, or the reverse. No compiler warning is possible and
it'll just silently do the wrong thing at runtime.
By introducing the vnc_set_feature helper method, we can drop
all the _MASK constants and thus prevent any future accidents.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many configurations, e.g. multiple vNICs with multiple queues or
with many Ceph OSDs, the default soft limit of 1024 is not enough.
QEMU is supposed to work fine with file descriptors >= 1024 and does
not use select() on POSIX. Bump the soft limit to the allowed hard
limit to avoid issues with the aforementioned configurations.
Of course the limit could be raised from the outside, but the man page
of systemd.exec states about 'LimitNOFILE=':
> Don't use.
> [...]
> Typically applications should increase their soft limit to the hard
> limit on their own, if they are OK with working with file
> descriptors above 1023,
If the soft limit is already the same as the hard limit, avoid the
superfluous setrlimit call. This can avoid a warning with a strict
seccomp filter blocking setrlimit if NOFILE was already raised before
executing QEMU.
Buglink: https://bugzilla.proxmox.com/show_bug.cgi?id=4507
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the SM4 cipher algorithms (OSCCA GB/T 32907-2016).
SM4 (GBT.32907-2016) is a cryptographic standard issued by the
Organization of State Commercial Administration of China (OSCCA)
as an authorized cryptographic algorithms for the use within China.
Detect the SM4 cipher algorithms and enable the feature silently
if it is available.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When scanning the list of warning flags to see if one is present, it is
helpful if they are in alphabetical order. It is further helpful to
separate out the 'no-' prefixed warnings.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- William's fix on hwpoison migration which used to crash QEMU
- Peter's multifd cleanup + bugfix + optimizations
- Avihai's fix on multifd crash over non-socket channels
- Fabiano's multifd thread-race fix
- Peter's CI fix series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZcREtRIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wacrwEAl2aeQkh51h/e+OKX7MG4/4Y6Edf6Oz7o
IJLk/cyrUFQA/2exo2lOdv5zHNOJKwAYj8HYDraezrC/MK1eED4Wji0M
=k53l
-----END PGP SIGNATURE-----
Merge tag 'migration-staging-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull
- William's fix on hwpoison migration which used to crash QEMU
- Peter's multifd cleanup + bugfix + optimizations
- Avihai's fix on multifd crash over non-socket channels
- Fabiano's multifd thread-race fix
- Peter's CI fix series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZcREtRIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wacrwEAl2aeQkh51h/e+OKX7MG4/4Y6Edf6Oz7o
# IJLk/cyrUFQA/2exo2lOdv5zHNOJKwAYj8HYDraezrC/MK1eED4Wji0M
# =k53l
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 08 Feb 2024 03:04:21 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-staging-pull-request' of https://gitlab.com/peterx/qemu: (34 commits)
ci: Update comment for migration-compat-aarch64
ci: Remove tag dependency for build-previous-qemu
tests/migration-test: Stick with gicv3 in aarch64 test
migration/multifd: Add a synchronization point for channel creation
migration/multifd: Unify multifd and TLS connection paths
migration/multifd: Move multifd_send_setup into migration thread
migration/multifd: Move multifd_send_setup error handling in to the function
migration/multifd: Remove p->running
migration/multifd: Join the TLS thread
migration: Fix logic of channels and transport compatibility check
migration/multifd: Optimize sender side to be lockless
migration/multifd: Fix MultiFDSendParams.packet_num race
migration/multifd: Stick with send/recv on function names
migration/multifd: Cleanup multifd_load_cleanup()
migration/multifd: Cleanup multifd_save_cleanup()
migration/multifd: Rewrite multifd_queue_page()
migration/multifd: Change retval of multifd_send_pages()
migration/multifd: Change retval of multifd_queue_page()
migration/multifd: Split multifd_send_terminate_threads()
migration/multifd: Forbid spurious wakeups
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bare bones 32 bit RVI CPU, rv32i, will make users lives easier when a
full customized 32 bit CPU is desired, and users won't need to disable
defaults by hand as they would with the rv32 CPU. [1] has an example of
a situation that would be avoided with rv32i.
In fact, add bare bones CPUs for RVE as well. Trying to use RVE in QEMU
requires one to disable every single default extension, including RVI,
and then add the desirable extension set. Adding rv32e/rv64e makes it
more pleasant to use embedded CPUs in QEMU.
[1] https://lore.kernel.org/qemu-riscv/258be47f-97be-4308-bed5-dc34ef7ff954@Spark/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122123348.973288-3-dbarboza@ventanamicro.com>
[ Changes by AF:
- Rebase on latest changes
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Next patch will add more bare CPUs. Their cpu_init() functions would be
glorified copy/pastes of rv64i_bare_cpu_init(), differing only by a
riscv_cpu_set_misa() call.
Add a new .instance_init for the TYPE_RISCV_BARE_CPU typ to avoid this
code repetition. While we're at it, add a better explanation on why
we're disabling the timing extensions for bare CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122123348.973288-2-dbarboza@ventanamicro.com>
[ Changes by AF:
- Rebase on latest changes
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With SMBIOS support added for RISC-V we also should enable the command line
option.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-5-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Generate SMBIOS tables for the RISC-V mach-virt.
Add CONFIG_SMBIOS=y to the RISC-V default config.
Set the default processor family in the type 4 table.
The implementation is based on the corresponding ARM and Loongson code.
With the patch the following firmware tables are provided:
etc/smbios/smbios-anchor
etc/smbios/smbios-tables
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-4-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Provide a function to set the default processor family.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-3-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For RISC-V the SMBIOS standard requires specific values of the processor
family value depending on the bitness of the CPU.
Add a processor-family option for SMBIOS table 4.
The value of processor-family may exceed 255 and therefore must be provided
in the Processor Family 2 field. Set the Processor Family field to 0xFE
which signals that the Processor Family 2 is used.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-2-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A few months ago I submitted a patch to various lists, deprecating
"riscv,isa" with a lengthy commit message [0] that is now commit
aeb71e42caae ("dt-bindings: riscv: deprecate riscv,isa") in the Linux
kernel tree. Primarily, the goal was to replace "riscv,isa" with a new
set of properties that allowed for strictly defining the meaning of
various extensions, where "riscv,isa" was tied to whatever definitions
inflicted upon us by the ISA manual, which have seen some variance over
time.
Two new properties were introduced: "riscv,isa-base" and
"riscv,isa-extensions". The former is a simple string to communicate the
base ISA implemented by a hart and the latter an array of strings used
to communicate the set of ISA extensions supported, per the definitions
of each substring in extensions.yaml [1]. A beneficial side effect was
also the ability to define vendor extensions in a more "official" way,
as the ISA manual and other RVI specifications only covered the format
for vendor extensions in the ISA string, but not the meaning of vendor
extensions, for obvious reasons.
Add support for setting these two new properties in the devicetrees for
the various devicetree platforms supported by QEMU for RISC-V. The Linux
kernel already supports parsing ISA extensions from these new
properties, and documenting them in the dt-binding is a requirement for
new extension detection being added to the kernel.
A side effect of the implementation is that the meaning for elements in
"riscv,isa" and in "riscv,isa-extensions" are now tied together as they
are constructed from the same source. The same applies to the ISA string
provided in ACPI tables, but there does not appear to be any strict
definitions of meanings in ACPI land either.
Link: https://lore.kernel.org/qemu-riscv/20230702-eats-scorebook-c951f170d29f@spud/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/extensions.yaml [1]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240124-unvarying-foothold-9dde2aaf95d4@spud>
[ Changes by AF:
- Rebase on recent changes
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A cpu may not have the same xlen as the compile time target, and
misa_mxl_max is the source of truth for what the hart supports.
The conversion from misa_mxl_max to xlen already has one user, so
introduce a helper and use that to populate the isa string.
Link: https://lore.kernel.org/qemu-riscv/20240108-efa3f83dcd3997dc0af458d7@orel/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240124-swear-monthly-56c281f809a6@spud>
[ Changes by AF:
- Convert to use RISCVCPUClass *mcc
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Expose the newly added extensions to the guest and allow their control
through the CPU properties.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240123111030.15074-4-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Following the pattern for 'M' and Zmmul check if either the 'A'
extension is enabled or the appropriate split extension for the
instruction.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240123111030.15074-3-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These extensions represent the atomic operations from A (Zaamo) and the
Load-Reserved/Store-Conditional operations from A (Zalrsc)
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240123111030.15074-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have a lot of cases where a char or an uint32_t pointer is used once
to alloc a string/array, read/written during the function, and then
g_free() at the end. There's no pointer re-use - a single alloc, a
single g_free().
Use 'g_autofree' to avoid the g_free() calls.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move 'soc_name' to the loop, and give it g_autofree, to avoid the manual
g_free().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240122221529.86562-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
