This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We don't have to duplicate the definition any more now that we may refer
to a type instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The Abort action can be used to test QMP 'transaction' failure. Add it
as the last action to exercise the .abort() and .cleanup() code paths
for all previous actions.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a transactional version of the drive-backup QMP command.
It allows atomic snapshots of multiple drives along with automatic
cleanup if there is a failure to start one of the backup jobs.
Note that QMP events are emitted for block job completion/cancellation
and the block job will be listed by query-block-jobs.
@device: the name of the device whose writes should be mirrored.
@target: the target of the new image. If the file exists, or if it
is a device, the existing file/device will be used as the new
destination. If it does not exist, a new file will be created.
@format: #optional the format of the new destination, default is to
probe if @mode is 'existing', else the format of the source
@mode: #optional whether and how QEMU should create a new image, default is
'absolute-paths'.
@speed: #optional the maximum speed, in bytes per second
@on-source-error: #optional the action to take on an error on the source,
default 'report'. 'stop' and 'enospc' can only be used
if the block device supports io-status (see BlockInfo).
@on-target-error: #optional the action to take on an error on the target,
default 'report' (no limitations, since this applies to
a different block device than @device).
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
@drive-backup
Start a point-in-time copy of a block device to a new destination. The
status of ongoing drive-backup operations can be checked with
query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
The operation can be stopped before it has completed using the
block-job-cancel command.
@device: the name of the device which should be copied.
@target: the target of the new image. If the file exists, or if it
is a device, the existing file/device will be used as the new
destination. If it does not exist, a new file will be created.
@format: #optional the format of the new destination, default is to
probe if @mode is 'existing', else the format of the source
@mode: #optional whether and how QEMU should create a new image, default is
'absolute-paths'.
@speed: #optional the maximum speed, in bytes per second
@on-source-error: #optional the action to take on an error on the source,
default 'report'. 'stop' and 'enospc' can only be used
if the block device supports io-status (see BlockInfo).
@on-target-error: #optional the action to take on an error on the target,
default 'report' (no limitations, since this applies to
a different block device than @device).
Note that @on-source-error and @on-target-error only affect background I/O.
If an error occurs during a guest write request, the device's rerror/werror
actions will be used.
Returns: nothing on success
If @device is not a valid block device, DeviceNotFound
Since 1.6
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This capability allows you to disable dynamic chunk registration
for better throughput on high-performance links.
For example, using an 8GB RAM virtual machine with all 8GB of memory in
active use and the VM itself is completely idle using a 40 gbps infiniband link:
1. x-rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
2. x-rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps
These numbers would of course scale up to whatever size virtual machine
you have to migrate using RDMA.
Enabling this feature does *not* have any measurable affect on
migration *downtime*. This is because, without this feature, all of the
memory will have already been registered already in advance during
the bulk round and does not need to be re-registered during the successive
iteration rounds.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This exposes throughput (in megabits/sec) through QMP.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Just use the TARGET_NAME free string.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1370349928-20419-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now image info will be retrieved as an embbed json object inside
BlockDeviceInfo, backing chain info and all related internal snapshot
info can be got in the enhanced recursive structure of ImageInfo. New
recursive member *backing-image is added to reflect the backing chain
status.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There's no reason to restrict transactions to operations related to
block devices, so rename the type now before schema introspection stops
us from doing so.
Also change the schema documentation of 'transaction' to not refer to
block devices or snapshots any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now we have memory char device, but the backend name of it
is a little confusion. We actually register it by 'memory', but
the description in qemu-option, the name of open functions
and the new api backend called it 'ringbuf'. It should keep
consistent. This patch named it all to 'memory'.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When register and open a chardev udp, the backend name should be udp
not dgram, and we do not have backend dgram in the chardev list. This
patch makes the new qapi udp backend consistent with the original
udp device.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Message-id: 1369032665-18159-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This property will be useful for libvirt, as libvirt already has logic
based on low-level feature bits (not feature names), so it will be
really easy to convert the current libvirt logic to something using the
"feature-words" property.
The property will have two main use cases:
- Checking host capabilities, by checking the features of the "host"
CPU model
- Checking which features are enabled on each CPU model
Example output:
$ ./QMP/qmp --path=/tmp/m \
qom-get --path=/machine/icc-bridge/icc/child[0] \
--property=feature-words
item[0].cpuid-register: EDX
item[0].cpuid-input-eax: 2147483658
item[0].features: 0
item[1].cpuid-register: EAX
item[1].cpuid-input-eax: 1073741825
item[1].features: 0
item[2].cpuid-register: EDX
item[2].cpuid-input-eax: 3221225473
item[2].features: 0
item[3].cpuid-register: ECX
item[3].cpuid-input-eax: 2147483649
item[3].features: 101
item[4].cpuid-register: EDX
item[4].cpuid-input-eax: 2147483649
item[4].features: 563346425
item[5].cpuid-register: EBX
item[5].cpuid-input-eax: 7
item[5].features: 0
item[5].cpuid-input-ecx: 0
item[6].cpuid-register: ECX
item[6].cpuid-input-eax: 1
item[6].features: 2155880449
item[7].cpuid-register: EDX
item[7].cpuid-input-eax: 1
item[7].features: 126614521
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Adds "cpu-add id=xxx" QMP command.
cpu-add's "id" argument is a CPU number in a range [0..max-cpus)
Example QMP command:
-> { "execute": "cpu-add", "arguments": { "id": 2 } }
<- { "return": {} }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The guest will be in this state when it is panicked.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 0255f263ffdc2a3716f73e89098b96fd79a235b3.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Libvirt has no way to probe if an option or property is supported,
This patch introduces a new qmp command to query command line
option information. hmp command isn't added because it's not needed.
Signed-off-by: Amos Kong <akong@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Osier Yang <jyang@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This reverts commit 4d700430a2 as asked by
Luiz. The patch has been obsoleted by extending MachineInfo structure
by cpu-max field.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Alter the query-machines QMP command to output information about
maximum number of CPUs for each machine type with default value
set to 1 in case the number of max_cpus is not set.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new qmp event for hotplug support by myself.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRUfDAAAoJECgfDbjSjVRp5wwH/RiNzEuC0SNuMArXh2LS+qjn
EavcSRTas5800Rl8bW2iYwJV38WhyW7jKs3JxbL5iK6XLeZvr7mureMRpsT6N5cR
WPqoZBw2jIxcHmYZODHTGd9SrAmF2LpfKypN3a86P5P4sQvV/dEusPQx7ZNyi5I5
kdhqNyP6Q6scAUbJVrNUbcOy8euLUtpEO2VQju/gikz2KLsQj6Hyxt9vKV2ZquYU
B7pKvYt5UZhNPqhfBmRptW+U0CMYUPiZBZkZsTEPUibIFHQqGkMD/KtthFFDZc/U
hjxttuETzjACR3KKgegwLVYCFEF8WadPJark4LWb4D9TA1MIdgo2NabNpqYxqrA=
=PY9F
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,pci,qom
Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new qmp event for hotplug support by myself.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Alex Williamson (13) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony: (23 commits)
pcie: Add endpoint capability initialization wrapper
roms: switch oldnoconfig to olddefconfig
pcie: Mangle types to match topology
pci: Create and use API to determine root buses
pci: Create pci_bus_is_express helper
pci: Q35, Root Ports, and Switches create PCI Express buses
pci: Allow PCI bus creation interfaces to specify the type of bus
pci: Move PCI and PCIE type defines
pci: Create and register a new PCI Express TypeInfo
exec: assert that RAMBlock size is non-zero
pci: refuse empty ROM files
pci_bridge: Remove duplicate IRQ swizzle function
pci_bridge: Use a default map_irq function
pci: Fix INTx routing notifier recursion
pci_bridge: drop formatting from source
pci_bridge: factor out common code
pci: Teach PCI Bridges about VGA routing
pci: Add PCI VGA helpers
virtio-pci: guest notifier mask without non-irqfd
virtio-net: remove layout assumptions for mq ctrl
...
# By Peter Lieven (9) and others
# Via Juan Quintela
* quintela/migration.next: (22 commits)
Use qemu_put_buffer_async for guest memory pages
Add qemu_put_buffer_async
Use writev ops if available
Store the data to send also in iovec
Update bytes_xfer in qemu_put_byte
Add socket_writev_buffer function
Add QemuFileWritevBuffer QemuFileOps
migration: use XBZRLE only after bulk stage
migration: do not search dirty pages in bulk stage
migration: do not sent zero pages in bulk stage
migration: add an indicator for bulk state of ram migration
migration: search for zero instead of dup pages
bitops: unroll while loop in find_next_bit()
buffer_is_zero: use vector optimizations if possible
cutils: add a function to find non-zero content in a buffer
move vector definitions to qemu-common.h
savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definition
savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32
savevm: Add VMSTATE_FLOAT64 helpers
savevm: Add VMSTATE_UINTTL_EQUAL helper
...
during bulk stage of ram migration if a page is a
zero page do not send it at all.
the memory at the destination reads as zero anyway.
even if there is an madvise with QEMU_MADV_DONTNEED
at the target upon receipt of a zero page I have observed
that the target starts swapping if the memory is overcommitted.
it seems that the pages are dropped asynchronously.
this patch also updates QMP to return the number of
skipped pages in MigrationStats.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These commands return the maximum number of CPUs supported by the
currently running emulator instance, as defined in its QEMUMachine
struct.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
libvirt has a long-standing bug: when removing the device,
it can request removal but does not know when the
removal completes. Add an event so we can fix this in a robust way.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds 'memory' support to qapi and also switches over
the memory chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'vc' support to qapi and also switches over the
vc chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'pipe' support to qapi and also switches over the
pipe chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'console' support to qapi and also switches over the
console chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'stdio' support to qapi and also switches over the
stdio chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'braille' support to qapi and also switches over
the braille chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'msmouse' support to qapi and also switches over
the msmouse chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Show how many clusters are compressed. This can be used to monitor how
many compressed clusters remain and whether to recompress the image.
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This option --output=[human|json] makes qemu-img check output a human
or JSON representation at the choice of the user.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New device, has never been released, so we can still improve things
without worrying about compatibility.
Naming is a mess. The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO". "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver. Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory. Therefore:
* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
"ringbuf" in the API.
* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.
* Rename device parameter from maxcapacity to size (simple words are
good for you).
* Clearly mark the parameter as optional in documentation.
* Fix error reporting so that chardev-add reports to current monitor,
not stderr.
* Replace cirmem in C identifiers by ringbuf.
* Rework documentation. Document the impact of our crappy UTF-8
handling on reading.
* QMP examples that even work.
I could split this up into multiple commits, but they'd change the
same documentation lines multiple times. Not worth it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New errors should be generic unless there's a real use case for rich
errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The data returned has a well-defined size, which makes the size
returned along with it redundant at best. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Command memchar-write takes data and size parameter. Begs the
question what happens when data doesn't match size.
With format base64, qmp_memchar_write() copies the full data argument,
regardless of size argument.
With format utf8, qmp_memchar_write() copies size bytes from data,
happily reading beyond data. Copies crap from the heap or even
crashes.
Drop the size parameter, and always copy the full data argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF
for a signle device many times to create multiple file descriptors as
independent queues. User could also enable/disabe a specific queue through
TUNSETQUEUE.
The patch adds the generic infrastructure to create multiqueue taps. To achieve
this a new parameter "queues" were introduced to specify how many queues were
expected to be created for tap by qemu itself. Alternatively, management could
also pass multiple pre-created tap file descriptors separated with ':' through a
new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file
descriptors could also be passed in this way.
Each TAPState were still associated to a tap fd, which mean multiple TAPStates
were created when user needs multiqueue taps. Since each TAPState contains one
NetClientState, with the multiqueue nic support, an N peers of NetClientState
were built up.
A new parameter, mq_required were introduce in tap_open() to create multiqueue
tap fds.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
This makes sense when the next commit starts using the extra buffer space
to perform many I/O operations asynchronously.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The desired granularity may be very different depending on the kind of
operation (e.g. continuous replication vs. collapse-to-raw) and whether
the VM is expected to perform lots of I/O while mirroring is in progress.
Allow the user to customize it, while providing a sane default so that
in general there will be no extra allocated space in the target compared
to the source.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Next commit will re-enable balloon stats with a different interface, but
this old code conflicts with it. Let's drop it.
It's important to note that the QMP and HMP interfaces are also dropped
by this commit. That shouldn't be a problem though, because:
1. All QMP fields are optional
2. This feature has always been disabled
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The ptsname is returned directly, so there is no need to
use query-chardev to figure the pty device path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu_chr_open_socket is split into two functions. All initialization
after creating the socket file handler is split away into the new
qemu_chr_open_socket_fd function.
chr->filename doesn't get filled from QemuOpts any more. Qemu gathers
the information using getsockname and getnameinfo instead. This way it
will also work correctly for file handles passed via file descriptor
passing.
Finally qmp_chardev_open_socket() is the actual qmp hotplug
implementation which basically just calls socket_listen or
socket_connect and the new qemu_chr_open_socket_fd function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Similar to file, except that no separate in/out files are supported
because it's pointless for direct device access. Also the special
tty ioctl hooks (pass through linespeed settings etc) are activated
on Unix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add chardev-add and chardev-remove qmp commands. Hotplugging
a null chardev is supported for now, more will be added later.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch will allow the user to include the domain-search option in
replies from the built-in DHCP server. The domain suffixes can be
specified by adding dnssearch= entries to the "-net user" parameter.
[Jan: tiny style adjustments]
Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* kwolf/for-anthony: (32 commits)
osdep: Less restrictive F_SEFL in qemu_dup_flags()
qemu-iotests: add testcases for mirroring on-source-error/on-target-error
qmp: add pull_event function
mirror: add support for on-source-error/on-target-error
iostatus: forward block_job_iostatus_reset to block job
qemu-iotests: add mirroring test case
mirror: implement completion
qmp: add drive-mirror command
mirror: introduce mirror job
block: introduce BLOCK_JOB_READY event
block: add block-job-complete
block: rename block_job_complete to block_job_completed
block: export dirty bitmap information in query-block
block: introduce new dirty bitmap functionality
block: add bdrv_open_backing_file
block: add bdrv_query_stats
block: add bdrv_query_info
qemu-config: Add new -add-fd command line option
monitor: Prevent removing fd from set during init
monitor: Enable adding an inherited fd to an fd set
...
Conflicts:
vl.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'queue/qmp' of git://repo.or.cz/qemu/qmp-unstable:
migration: go to paused state after finishing incoming migration with -S
qmp: handle stop/cont in INMIGRATE state
hmp: fix info cpus for sparc targets
Right now, stop followed by an incoming migration will let the
virtual machine start. cont before an incoming migration instead
will fail.
This is bad because the actual behavior is not predictable; it is
racy with respect to the start of the incoming migration. That's
because incoming migration is blocking, and thus will delay the
processing of stop/cont until the end of the migration.
In addition, there's nothing that really prevents the user from
typing the block device's passwords before incoming migration is
done, so returning the DeviceEncrypted error is also helpful in
the QMP case.
Both things can be fixed by just toggling the autostart variable when
stop/cont are called in INMIGRATE state.
Note that libvirt is currently working around the race by looping
if the MigrationExpected answer is returned. After this patch, the
command will return right away without ever raising an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Error management is important for mirroring; otherwise, an error on the
target (even something as "innocent" as ENOSPC) requires to start again
with a full copy. Similar to on_read_error/on_write_error, two separate
knobs are provided for on_source_error (reads) and on_target_error (writes).
The default is 'report' for both.
The 'ignore' policy will leave the sector dirty, so that it will be
retried later. Thus, it will not cause corruption.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the monitor commands that start the mirroring job.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background. This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program. It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.
The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.
The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.
In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source. (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).
It is not yet possible to complete the job and switch over to the target
disk. The next patches will fix this and add many refinements to the
basic idea introduced here. These include improved error management,
some tunable knobs and performance optimizations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even for jobs that need to be manually completed, management may want
to take care itself of the completion, not requiring the user to issue
a command to terminate the job. In this case we want to avoid that
they poll us continuously, waiting for completion to become available.
Thus, add a new event that signals the phase switch and the availability
of the block-job-complete command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.
Add a new block job command that manually completes background operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The first call to add an fd to an fd set was previously not
allowed to choose the fd set ID. The ID was generated as
the first available and ensuing calls could add more fds by
specifying the fd set ID. This change allows users to
choose the fd set ID on the first call.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding an NBD server inside QEMU is trivial, since all the logic is
in nbd.c and can be shared easily between qemu-nbd and QEMU itself.
The main difference is that qemu-nbd serves a single unnamed export,
while QEMU serves named exports.
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* sstabellini/xen-2012-10-03:
xen: Set the vram dirty when an error occur.
exec, memory: Call to xen_modified_memory.
exec: Introduce helper to set dirty flags.
xen: Introduce xen_modified_memory.
QMP, Introduce xen-set-global-dirty-log command.
qemu/xen: Add 64 bits big bar support on qemu
xen: Fix, no unplug of pt device by platform device.
* kwolf/for-anthony: (30 commits)
qemu-iotests: add tests for streaming error handling
qemu-iotests: map underscore to dash in QMP argument names
blkdebug: process all set_state rules in the old state
stream: add on-error argument
block: introduce block job error
iostatus: reorganize io error code
iostatus: change is_read to a bool
iostatus: move BlockdevOnError declaration to QAPI
iostatus: rename BlockErrorAction, BlockQMPEventAction
qemu-iotests: add test for pausing a streaming operation
qmp: add block-job-pause and block-job-resume
block: add support for job pause/resume
qmp: add 'busy' member to BlockJobInfo
block: add block_job_query
block: move job APIs to separate files
block: fix documentation of block_job_cancel_sync
qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
qemu-iotests: add initial tests for live block commit
QAPI: add command for live block commit, 'block-commit'
block: helper function, to find the base image of a chain
...
This command is used during a migration of a guest under Xen. It calls
memory_global_dirty_log_start or memory_global_dirty_log_stop according to the
argument pass to the command.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch adds support for error management to streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following behaviors are possible:
'report': The behavior is the same as in 1.1. An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.
'ignore': An I/O error, respectively during a read or a write, will be
ignored. For streaming, the job will complete with an error and the
backing file will be left in place. For mirroring, the sector will be
marked again as dirty and re-examined later.
'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running. This can only be
specified if the block device has rerror=stop and werror=stop or enospc.
'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.
In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.
It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests. In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add QMP commands matching the functionality.
Paused jobs cannot be canceled without first resuming them. This
ensures that I/O errors are never missed by management. However, an
optional force argument can be specified to allow that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Job pausing reuses the existing support for cancellable sleeps. A pause
happens at the next sleeping point and lasts until the coroutine is
re-entered explicitly. Cancellation was already doing a forced resume,
so implement it explicitly in terms of resume.
Paused jobs cannot be canceled without first resuming them. This ensures
that I/O errors are never missed by management.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because pausing a job is asynchronous, we need to know whether it has
completed. This is described by the "busy" field of BlockJob; copy it
to BlockJobInfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The command for live block commit is added, which has the following
arguments:
device: the block device to perform the commit on (mandatory)
base: the base image to commit into; optional (if not specified,
it is the underlying original image)
top: the top image of the commit - all data from inside top down
to base will be committed into base (mandatory for now; see
note, below)
speed: maximum speed, in bytes/sec
Note: Eventually this command will support merging down the active layer,
but that code is not yet complete. If the active layer is passed
in as top, then an error will be returned. Once merging down the
active layer is supported, the 'top' argument may become optional,
and default to the active layer.
The is done as a block job, so upon completion a BLOCK_JOB_COMPLETED will
be emitted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before the qapi conversion, the sendkey command could be used to
send key codes in hex directly to the guest. In HMP, this would
be like:
(qemu) sendkey 0xdc
However, the qapi conversion broke this, as it only supports sending
QKeyCode values to the guest. That's a regression.
This commit fixes the problem by adding hex value support down
the QMP interface, qmp_send_key().
In more detail, this commit:
1. Adds the KeyValue union. This can represent an hex value or
a QKeyCode value
2. *Changes* the QMP send-key command to take an KeyValue argument
instead of a QKeyCode one
3. Adapt hmp_send_key() to the QMP interface changes
Item 2 is an incompatible change, but as we're in development phase
(and this command has been merged a few weeks ago) this shouldn't be
a problem.
Finally, it's not possible to split this commit without breaking the
build.
Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
o Add a note about memory allocation with paging=true
o Fix indentation
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Also fixes a few issues while there:
1. The fd returned by monitor_get_fd() leaks in most error conditions
2. monitor_get_fd() return value is not checked. Best case we get
an error that is not correctly reported, worse case one of the
functions using the fd (with value of -1) will explode
3. A few error conditions aren't reported
4. We now "use up" @fdname always. Before, it was left alone for
invalid @protocol
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
* kwolf/for-anthony:
block: Don't forget to delete temporary file
Don't require encryption password for 'qemu-img info' command
qemu-img: Add json output option to the info command.
qapi: Add SnapshotInfo and ImageInfo.
ahci: properly reset PxCMD on HBA reset
block: fix block tray status
vdi: Fix warning from clang
block/curl: Fix wrong free statement
ide: Fix error messages from static code analysis (no real error)
ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
sheepdog: fix savevm and loadvm
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
qxl: Add set_client_capabilities() interface to QXLInterface
spice: make number of surfaces runtime-configurable.
configure: print spice-protocol and spice-server versions
qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
qxl: disallow unknown revisions
qxl/update_area_io: guest_bug on invalid parameters
spice: increase the verbosity of spice section in "qemu --help"
spice: adding seamless-migration option to the command line
spice: add 'migrated' flag to spice info
spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
spice: notify on vm state change only via spice_server_vm_start/stop
spice: notify spice server on vm start/stop
spice: abort on invalid streaming cmdline params
Convert 'sendkey' to use QAPI.
QAPI passes key's index of mapping table to qmp_send_key(),
not keycode. So we use help functions to convert key/code to
index of key_defs, and 'index' will be converted to 'keycode'
inside qmp_send_key().
For qmp, QAPI would check invalid key and raise error.
For hmp, invalid key is checked in hmp_send_key().
'send-key' of QMP doesn't support key in hexadecimal format.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
key_defs[] in monitor.c is a mapping table of keys and keycodes,
this patch added a QKeyCode enum. Key's index in the enmu is same
as keycode's index in key_defs[].
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The flag is 'true' when spice migration has completed on the src side.
It is needed for a case where libvirt dies before migration completes
and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED.
When libvirt is restored and queries the migration status, it also needs
to query spice and check if its migration has completed.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a 'query-target' QAPI command to allow management applications
to determine what target architecture a QEMU binary is emulating
without having to parse the binary name or -help output
$ qmp-shell -p /tmp/qemu
(QEMU) query-target
{ u'return': { u'arch': u'x86_64' }}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support that enables passing of file descriptors
to the QEMU monitor where they will be stored in specified file
descriptor sets.
A file descriptor set can be used by a client like libvirt to
store file descriptors for the same file. This allows the
client to open a file with different access modes (O_RDWR,
O_WRONLY, O_RDONLY) and add/remove the passed fds to/from an fd
set as needed. This will allow QEMU to (in a later patch in this
series) "open" and "reopen" the same file by dup()ing the fd in
the fd set that corresponds to the file, where the fd has the
matching access mode flag that QEMU requests.
The new QMP commands are:
add-fd: Add a file descriptor to an fd set
remove-fd: Remove a file descriptor from an fd set
query-fdsets: Return information describing all fd sets
Note: These commands are not compatible with the existing getfd
and closefd QMP commands.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qmp/queue/qmp: (48 commits)
target-ppc: add implementation of query-cpu-definitions (v2)
target-i386: add implementation of query-cpu-definitions (v2)
qapi: add query-cpu-definitions command (v2)
compiler: add macro for GCC weak symbols
qapi: add query-machines command
qapi: mark QOM commands stable
qmp: introduce device-list-properties command
qmp: add SUSPEND_DISK event
qmp: qmp-events.txt: add missing doc for the SUSPEND event
qmp: qmp-events.txt: put events in alphabetical order
qmp: emit the WAKEUP event when the guest is put to run
qmp: don't emit the RESET event on wakeup from S3
scripts: qapi-commands.py: qmp-commands.h: include qdict.h
docs: writing-qmp-commands.txt: update error section
error, qerror: drop QDict member
qerror: drop qerror_table and qerror_format()
error, qerror: pass desc string to error calls
error: drop error_get_qobject()/error_set_qobject()
qemu-ga: switch to the new error format on the wire
qmp: switch to the new error format on the wire
...
This command attempts to map to the behavior of -cpu ?. Unfortunately, the
output of this command differs wildly across targets.
To accommodate this, we use a weak symbol to implement a default version of the
command that fails with a QERR_NOT_SUPPORTED error code. Targets can then
override and implement this command if it makes sense for them.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This provides the same output as -M ? but in a structured way.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We've had a cycle to tweak. It is time to commit to supporting them.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This can be used in conjunction with qom-list-types to determine the supported
set of devices and their parameters.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
IMPORTANT: this BREAKS QMP's compatibility for the error response.
This commit changes QMP's wire protocol to make use of the simpler
error format introduced by previous commits.
There are two important (and mostly incompatible) changes:
1. Almost all error classes have been replaced by GenericError. The
only classes that are still supported for compatibility with
libvirt are: CommandNotFound, DeviceNotActive, KVMMissingCap,
DeviceNotFound and MigrationExpected
2. The 'data' field of the error dictionary is gone
As an example, an error response like:
{ "error": { "class": "DeviceNotRemovable",
"data": { "device": "virtio0" },
"desc": "Device 'virtio0' is not removable" } }
Will now be emitted as:
{ "error": { "class": "GenericError",
"desc": "Device 'virtio0' is not removable" } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.
New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can enable/disable a capability for the next migration by using
migrate-set-capabilities QMP command.
The user can use migrate_set_capability HMP command.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Talk about background operations in general, rather than specifically
about streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qmp/queue/qmp:
hmp: show the backing file depth
block: Use bdrv_get_backing_file_depth()
block: create bdrv_get_backing_file_depth()
qapi: qapi.py: allow the "'" character to be escaped
Use the dedicated counting function in qmp_query_block in order to
propagate the backing file depth to HMP and add backing_file_depth
to qmp-commands.hx
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The vlan feature can be implemented in terms of hubs. By introducing a
hub net client it becomes possible to remove the special case vlan code
from net.c and push the vlan feature out of generic networking code.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NetdevTapOptions::sndbuf and NetdevDumpOptions::len use the new "size"
type.
v1->v2:
- NetLegacy::name is optional
- NetLegacyNicOptions::vectors is of type uint32
- NetdevVdeOptions::port and ::mode are of type uint16
- NetLegacy::vlan has type int32
v2->v3:
- NetLegacy::id is allowed and takes precedence over NetLegacy::name
- replace "@traits" with "@opts" in NetLegacy & Netdev descriptions
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We add time spent for migration to the output of "info migrate"
command. 'total_time' means time since the start fo migration if
migration is 'active', and total time of migration if migration is
completed. As we are also interested in transferred ram when
migration completes, adding all ram statistics
Signed-off-by: Juan Quintela <quintela@redhat.com>
Sometimes it is neccessary for an application to determine
whether a particular QMP event is available, so they can
decide whether to use compatibility code instead. This
introduces a new 'query-events' command to QMP to do just
that
{ "execute": "query-events" }
{"return": [{"name": "WAKEUP"},
{"name": "SUSPEND"},
{"name": "DEVICE_TRAY_MOVED"},
{"name": "BLOCK_JOB_CANCELLED"},
{"name": "BLOCK_JOB_COMPLETED"},
...snip...
{"name": "SHUTDOWN"}]}
* monitor.c: Turn MonitorEvent -> string conversion
into a lookup from a static table of constant strings.
Add impl of qmp_query_events monitor command handler
* qapi-schema.json, qmp-commands.hx: Define contract of
query-events command
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is not a full QAPI conversion, but an intermediate step.
In essence, do_netdev_add() is split into three functions:
1. netdev_add(): performs the actual work. This function is fully
converted to Error (thus, it's "qapi-friendly")
2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is
coded by hand and not auto-generated (gen=no in the schema). The
reason for this it's a lot easier and simpler to with QemuOpts
this way
3. hmp_netdev_add(): HMP front-end.
This design was suggested by Paolo Bonzini.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
The command's usage:
dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
fd's name.
Note:
1. If you want to use gdb to process the core, please specify -p option.
The reason why the -p option is not default is:
a. guest machine in a catastrophic state can have corrupted memory,
which we cannot trust.
b. The guest machine can be in read-mode even if paging is enabled.
For example: the guest machine uses ACPI to sleep, and ACPI sleep
state goes in real-mode.
2. If you don't want to dump all guest's memory, please specify the start
physical address and the length.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QEMU enters in this state when the guest suspends to ram (S3).
This is important so that HMP users and QMP clients can know that
the guest is suspended. QMP also has an event for this, but events
are not reliable and are limited (ie. a client can connect to QEMU
after the event has been emitted).
Having a different state for S3 brings a new issue, though. Every
device that doesn't run when the VM is stopped but wants to run
when the VM is suspended has to check for RUN_STATE_SUSPENDED
explicitly. This is the case for the keyboard and mouse devices,
for example.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add mouse_mode, either server or mouse, to qmp and hmp commands, based
on spice_server_is_server_mouse added in spice-server 0.10.3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed. Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are at least two different errors that can occur in
block_job_set_speed(): the job might not support setting speeds or the
value might be invalid.
Use the Error mechanism to report the error where it occurs.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The block streaming and job commands used '_' instead of '-' for reasons
of compatibility with libvirt, which already included support for the
'_' naming. However, the semantics of block_job_cancel have changed and
libvirt now needs to handle the new semantics.
Since the old semantics were never in a QEMU release we can still rename
the commands to use '-' instead of '_'. Libvirt is also happy because
the new name can be used to distinguish QEMU binaries that support the
latest block-job-cancel semantics from those that include a downstream
block_job_cancel command.
Therefore, let's apply the QAPI/QMP naming rules to the block streaming
and job commands. QEMU 1.1 will be the first release with these
commands so no upstream users can break.
Note that HMP commands are left with '_' because that is the convention
there.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* sstabellini/saverestore-8:
xen: do not allocate RAM during INMIGRATE runstate
xen mapcache: check if memory region has moved.
xen: record physmap changes to xenstore
Set runstate to INMIGRATE earlier
Introduce "xen-save-devices-state"
cirrus_vga: do not reset videoram
Conflicts:
qapi-schema.json
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- add an "is_ram" flag to SaveStateEntry;
- register_savevm_live sets is_ram for live_savevm devices;
- introduce a "xen-save-devices-state" QAPI command that can be used to save
the state of all devices, but not the RAM or the block devices of the
VM.
Changes in v8:
- rename save-devices-state to xen-save-devices-state.
Changes in v7:
- rename save_devices to save-devices-state.
Changes in v6:
- remove the is_ram parameter from register_savevm_live and sets is_ram
if the device is a live_savevm device;
- introduce save_devices as a QAPI command, write a better description
for it;
- fix CODING_STYLE;
- introduce a new doc to explain the save format used by save_devices.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.
The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.
Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.
To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.
All these changes should be transparent to the user.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* kwolf/for-anthony:
test-coroutine: add performance test for nesting
coroutine: adding configure option for sigaltstack coroutine backend
coroutine: adding configure choose mechanism for coroutine backend
coroutine: adding sigaltstack method (.c source)
qcow2: Reduce number of I/O requests
qcow2: Add qcow2_alloc_clusters_at()
qcow2: Factor out count_cow_clusters
qmp: convert blockdev-snapshot-sync to a wrapper around transactions
add mode field to blockdev-snapshot-sync transaction item
rename blockdev-group-snapshot-sync
qapi: complete implementation of unions
use QSIMPLEQ_FOREACH_SAFE when freeing list elements
Add 'make check-block'
make check: Add qemu-iotests subset
qemu-iotests: Mark some tests as quick
qcow2: Add error messages in qcow2_truncate
block: handle -EBUSY in bdrv_commit_all()
qcow2: Add some tracing
qed: do not evict in-use L2 table cache entries
Group snapshot: Fix format name for backing file
Simplify the blockdev-snapshot-sync code and gain failsafe operation
by turning it into a wrapper around the new transaction command. A new
option is also added matching "mode".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mode field lets a management application create the snapshot
destination outside QEMU.
Right now, the only modes are "existing" and "absolute-paths". Mirroring
introduces "no-backing-file". In the future "relative-paths" could be
implemented too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will add other kinds of operation. Prepare for this by adjusting
the schema.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
