The old CentOS image didn't work anymore because it was already EOL at
the beginning of 2022.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220708153503.18864-4-jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the initial setup fails, you've permanently altered the state of the
downloaded image in an unknowable way. Use 'cp' like our other test
setup scripts do.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220708153503.18864-3-jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running from the build tree, the executable is able to find
the BIOS on its own; when running from the source tree, a firmware
blob should already be installed and there is no guarantee that
the one in the source tree works with the QEMU that is being used for
the installation.
Just remove the -bios option, since it is unnecessary and in fact
there are other x86 VM tests that do not bother specifying it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tests/vm/Makefile.include used to assume that it could run in an unconfigured
source tree, and Cirrus CI relies on that. It was however broken by commit
f4c66f1705 ("tests: use tests/venv to run basevm.py-based scripts", 2022-06-06),
which co-opted the virtual environment being used by avocado tests
to also run the basevm.py tests.
For now, reintroduce the usage of qemu.qmp from the source directory, but
without the sys.path() hacks. The CI configuration can be changed to
install the package via pip when qemu.qmp is removed from the source tree.
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch co-opts the virtual environment being used by avocado tests
to also run the basevm.py tests. This is being done in preparation for
for the qemu.qmp package being removed from qemu.git.
As part of the change, remove any sys.path() hacks and treat "qemu" as a
normal third-party import.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220526000921.1581503-8-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Capstone library that is shipped with NetBSD and OpenBSD works
fine when compiling QEMU, so let's enable this in our build-test
VMs to get a little bit more build-test coverage.
Message-Id: <20220516145823.148450-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
tests/vm/openbsd: Update to release 7.1
Signed-off-by: Brad Smith <brad@comstyle.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <YnRed7sw45lTbRjb@humpty.home.comstyle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The perl test harness is not necessary anymore since commit 3d2f73ef75
("build: use "meson test" as the test harness"). Thus remove it from
tests/lcitool/projects/qemu.yml, run "make lcitool-refresh" and manually
clean the remaining docker / vm files that are not managed by lcitool yet.
Message-Id: <20220329102808.423681-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The old image did not have python3 yet, and thus was not usable
for compiling QEMU anymore.
Suggested-by: Alexander von Gluck IV <kallisti5@unixzen.com>
Message-Id: <20220216154208.2985103-1-kallisti5@unixzen.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Note, since libtasn1 was fixed in 12.3 [*], this commit re-enables GnuTLS.
[*] https://gitlab.com/gnutls/libtasn1/-/merge_requests/71
Signed-off-by: Brad Smith <brad@comstyle.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <YdUCQLVe5JSWZByQ@humpty.home.comstyle.com>
Message-Id: <20220105135009.1584676-31-alex.bennee@linaro.org>
While it is useful to run these images using TCG their performance
will not be anything like the native guests. Don't do it by default.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/393
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211115142915.3797652-4-alex.bennee@linaro.org>
Making the list alphabetical makes it easier to find the config option
you are looking for.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211115142915.3797652-3-alex.bennee@linaro.org>
There are two minor changes required in the script for the
network configuration of the newer release.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211018205313.3526915-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently the centos8 image expects to run an in-src build to find the
kick starter file. Fix this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210602103527.32021-1-alex.bennee@linaro.org>
* Bump minimum versions of some requirements after removing CentOS 7 support
-----BEGIN PGP SIGNATURE-----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=RAkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging
* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support
# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-9-berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
move python/qemu/*.py to python/qemu/[machine, qmp, utils]/*.py and
update import directives across the tree.
This is done to create a PEP420 namespace package, in which we may
create subpackages. To do this, the namespace directory ("qemu") should
not have any modules in it. Those files will go into new 'machine',
'qmp' and 'utils' subpackages instead.
Implement machine/__init__.py making the top-level classes and functions
from its various modules available directly inside the package. Change
qmp.py to qmp/__init__.py similarly, such that all of the useful QMP
library classes are available directly from "qemu.qmp" instead of
"qemu.qmp.qmp".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Slightly different versions for the same utility code are currently
present on different locations. This unifies them all, giving
preference to the version from virtiofs_submounts.py, because of the
last tweaks added to it.
While at it, this adds a "qemu.utils" module to host the utility
function and a test.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210412044644.55083-4-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
[Squashed in below fix. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210601154546.130870-2-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
FreeBSD 12.1 has reached end of life. Use 12.2 instead so that FreeBSD's
project's packages will work. Update which timezone to pick. Work around a QEMU
bug that incorrectly raises an exception on a CRC32 instruction with the FPU
disabled. The qemu bug is described here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg784158.html
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210307155654.993-2-imp@bsdimp.com>
[thuth: Disable gnutls to work-around a problem with libtasn1]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Setuptools is not needed anymore by the bundled copy of meson,
remove it.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander von Gluck IV <kallisti5@unixzen.com>
[PMD: Avoid recreating the image each time]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: Add ninja package, /usr/bin/env hack and --disable-slirp]
Message-Id: <20201114165137.15379-5-thuth@redhat.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1715203
Signed-off-by: Thomas Huth <thuth@redhat.com>
A double dash at the end of a package name removes ambiguity
when the intent is to install a non-FLAVORed package.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201027053048.GB64546@humpty.home.comstyle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson warns if xgettext is not found. In the future we may want to add
a required argument to i18n.gettext(); in the meanwhile, I am adding a
--enable-gettext/--disable-gettext option and feature detection in
configure. This preserves QEMU's default behavior of detecting system
features, without any warning, if neither --enable-* nor --disable-*
is requested.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to do it in the configure file if it is only used for a help message.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just make EFI_AARCH64 a variable in the makefile that defaults to the efi
firmware included with QEMU. It can be redefined on the "make" command
line.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are adding the shutdown timeout to solve an issue
we now see where the aarch64 VMs timeout on shutdown
under TCG.
There is a new 3 second timeout in machine.py,
which we override in basevm.py when shutting down.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200717203041.9867-4-robert.foley@linaro.org>
Message-Id: <20200724064509.331-17-alex.bennee@linaro.org>
We currently limit TCG guests to -smp 1 but now we have added some
aarch64 guests we can do better when running on x86_64 hardware.
Raise the limit for TCG guests when it is safe to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-16-alex.bennee@linaro.org>
optparse has been deprecated since version 3.2 and argparse is the
blessed replacement. Take the opportunity to enhance our help output
showing defaults when called.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200701135652.1366-15-alex.bennee@linaro.org>
This adds support to basevm.py so that we always
drain the console chars. This makes use of
support added in an earlier commit that allows
QEMUMachine to use the ConsoleSocket.
This is a workaround we found was needed since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
We also added the option of logging the console to a file.
LOG_CONSOLE=1 will now log the output to a file.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-10-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-14-alex.bennee@linaro.org>
This change converts existing scripts to using for example self.ROOT_PASS,
to self._config['root_pass'].
We made similar changes for GUEST_USER, and GUEST_PASS.
This allows us also to remove the change in basevm.py,
which adds __getattr__ for backwards compatibility.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200601211421.1277-8-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-12-alex.bennee@linaro.org>
centos.aarch64 creates a CentOS 8 image.
Also added a new kickstart script used to build the centos.aarch64 image.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-7-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-11-alex.bennee@linaro.org>
ubuntu.aarch64 provides a script to create an Ubuntu 18.04 VM.
Another new file is also added aarch64vm.py, which is a module with
common methods used by aarch64 VMs, such as how to create the
flash images.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-6-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-10-alex.bennee@linaro.org>
Add a common Ubuntu python module and make use of
it with the ubuntu.i386 script.
This is preparation for adding an Ubuntu script
ubuntu.aarch64. Splitting out the common
logic such as build_image() will reduce duplication.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-5-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-9-alex.bennee@linaro.org>
Changes to tests/vm/basevm.py to allow accepting a configuration file
as a parameter. Allows for specifying VM options such as
cpu, machine, memory, and arbitrary qemu arguments for specifying options
such as NUMA configuration.
Also added an example conf_example_aarch64.yml and conf_example_x86.yml.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-4-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-8-alex.bennee@linaro.org>
Added use of a configuration to tests/vm/basevm.py.
The configuration provides parameters used to configure a VM.
This allows for providing alternate configurations to the VM being
created/launched. cpu, machine, memory, and NUMA configuration are all
examples of configuration which we might want to vary on the VM being created
or launched.
This will for example allow for creating an aarch64 vm.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-3-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-7-alex.bennee@linaro.org>
Adding the args parameter to BaseVM's __init__.
We will shortly need to pass more parameters to the class
so let's just pass args rather than growing the parameter list.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-2-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-6-alex.bennee@linaro.org>
QEMU does not use flex/bison packages.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200515163029.12917-3-philmd@redhat.com>
This allows for waiting for completion of arbitrary commands.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-7-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Added a new special variable QEMU_LOCAL=1, which
will indicate to take the QEMU binary from the current
build.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-6-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This helps debug issues that occur during the boot sequence.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-5-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
If we have an alternative to genisoimage we really need to tell the
script about it as well so it can use it. It will still default to
genisoimage in case it is run outside our build machinery.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200519132259.405-3-robert.foley@linaro.org>
When the patch was merged it was part of a longer series which had
already merged the config changes. Semu-revert the config related
changes for now so things will build.
Fixes: b081986c85
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200323161514.23952-6-alex.bennee@linaro.org>
The installer supports GPT now, so the install workflow has changed a
bit. Also: run without VGA device. This works around a bug in the
seabios sercon code and makes the bootloader menu show up on the serial
line, so we can drop the quirk for that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200310083218.26355-5-kraxel@redhat.com>
Message-Id: <20200323161514.23952-5-alex.bennee@linaro.org>
Move '-device VGA' from basevm.py to the guests, so they have
the chance to opt out and run without display device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200310083218.26355-3-kraxel@redhat.com>
Message-Id: <20200323161514.23952-3-alex.bennee@linaro.org>
Run "tail -f /var/tmp/*/qemu*console.raw" in another terminal
to watch the install console.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200310083218.26355-2-kraxel@redhat.com>
Message-Id: <20200323161514.23952-2-alex.bennee@linaro.org>
This is used for some of the vm-build tests so lets detect it and
behave sanely when it is not installed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-8-alex.bennee@linaro.org>
This method was located in both centos and ubuntu.i386.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-6-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-6-alex.bennee@linaro.org>
Allow wait_ssh to wait for root user to be ready.
This solves the issue where we perform a wait_ssh()
successfully, but the root user is not yet ready
to be logged in.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200219163537.22098-5-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-5-alex.bennee@linaro.org>
Add change to increase timeout waiting for VM to boot.
Needed for some emulation cases where it can take longer
than 5 minutes to boot.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200219163537.22098-4-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-4-alex.bennee@linaro.org>
Add changes to tests/vm/basevm.py so that during debug mode we show ssh output.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-3-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-3-alex.bennee@linaro.org>
Change Makefile.include to use $(PYTHON) so for vm-boot-ssh to be
consistent with other cases like vm-build.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-2-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-2-alex.bennee@linaro.org>
Add it to several build systems to make testing good.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-5-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
FreeBSD seems to use python37 by default now, which breaks the build
script. Add python to the package list, to explicitly pick the version,
and also adapt the configure command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200106123746.18201-1-kraxel@redhat.com>
By default VM build test use qemu-img from system's PATH to
create the image disk. Due the lack of qemu-img on the system
or the desire to simply use a version built with QEMU, it would
be nice to allow one to set its path. So this patch makes that
possible by reading the path to qemu-img from QEMU_IMG if set,
otherwise it fallback to default behavior.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191114134246.12073-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This creates the 'accel' Python module to be the home for
utilities that deal with accelerators. Also moved kvm_available()
from __init__.py to this new module.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216191438.93418-2-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The current image is broken while running qtests but the bug go away
when built with a newer Ubuntu i386 image. I was unable to replicate
the crash on Debian Buster for i386 either so I'm concluding it is a
distro problem. Let's paper over that crack by updating our 32 bir
test image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The iotests in particular don't like the output being spammed with
warnings about locales.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
To be able to run the docker tests centos has here we have to install
python3 as well as the basic tools.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
While the concept of only dropping to ssh if a test fails is nice it
is more useful for this to be unconditional. You usually just want to
get the build up and running and then noodle around debugging or
attempting to replicate.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The NetBSD project uses SHA512 for its checksums so lets support that
in the download helper.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use new helper to read all pending console output,
not just a single char. Unblocks installer boot.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191031085306.28888-4-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Helper function to read all console output.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191031085306.28888-3-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Instead of fetching the prebuilt image from patchew download the install
iso and prepare the image locally. Install to disk, using the serial
console. Create qemu user, configure ssh login. Install packages
needed for qemu builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Tested-by: Thomas Huth <thuth@redhat.com>
[ehabkost: rebased to latest qemu.git master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191031085306.28888-2-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Workaround for issues when the host has no IPv6 connectivity.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191018181705.17957-4-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The mechanism will be used to work around issues related to IPv6
on the netbsd image builder.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018181705.17957-3-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The LinuxInitrd.test_with_2gib_file_should_work_with_linux_v4_16 test,
from tests/acceptance/linux_initrd.py, is currently failing to fetch
the "vmlinuz" file. The reason for the failure is that the Fedora
project retires older versions from the "dl.fedoraproject.org" URL,
and keeps them in "archives.fedoraproject.org". As an added note,
that test uses a Fedora 28 image, because of the specific Linux kernel
version requirements of the test.
For the sake of stability, let's use URLs from the archived and
supposedely ever stable URLs. The good news is that the currently
supported versions are also hosted on the later. This change limits
itself to change the URLs, while keeping the fetched files the same
(as can be evidenced by the unchanged hashes).
Documentation and the "vm tests" fedora definition were also updated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Yash Mankad <ymankad@redhat.com>
Message-Id: <20190904005218.12536-1-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
For testing whether the VMs can deal with multiple CPUs correctly,
it is useful to be able to use the "J=<cpus>" setting for the
vm-boot-ssh targets, too.
Message-Id: <20190726100207.19112-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We already have 'make check-help', use the 'make vm-help' form
to display helps about VM testing. Keep the old target to not
bother old customs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190531064341.29730-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Configure apt proxy so package downloads
can be cached and can pass firewalls.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-12-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Download the install iso and prepare the image locally. Install to
disk, using the serial console. Create qemu user, configure ssh login.
Install packages needed for qemu builds.
Yes, we have docker images for fedora. But for trouble-shooting it
might be helpful to have a vm too. When vm builds fail you can use
it to figure whenever the vm setup or the guest os is the problem.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-11-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Instead of fetching the prebuilt image from patchew download the install
iso and prepare the image locally. Install to disk, using the serial
console. Create qemu user, configure ssh login. Install packages
needed for qemu builds.
Note that freebsd package downloads are delivered as non-cachable
content, so I had to configure squid with "ignore-no-store
ignore-private ignore-reload" for pkgmir.geo.freebsd.org to make the
caching actually work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190617043858.8290-9-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Instead of fetching the prebuilt image from patchew download the install
iso and prepare the image locally. Install to disk, using the serial
console. Create qemu user, configure ssh login. Install packages
needed for qemu builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-8-kraxel@redhat.com>
[AJB: added tags]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add a bunch of helpers to talk to the guest using the
serial console.
Also drop the hard-coded -serial parameter for the vm
so QEMUMachine.set_console() actually works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-7-kraxel@redhat.com>
[AJB: added tags]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
For testing/troubleshooting convenience.
make vm-boot-serial-<guest>
Boot guest, with the serial console on stdio.
make vm-boot-ssh-<guest>
Boot guest, login via ssh.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-6-kraxel@redhat.com>
[AJB: added tags]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When not running in snapshot mode ask the guest to poweroff and wait for
this to finish instead of simply quitting qemu, so the guest can flush
pending updates to disk.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-5-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The build script doesn't shutdown the guest VMs properly,
which results in filesystem corruption and guest boot
failures sooner or later.
Use the --snapshot to run builds on a snapshot,
That way killing the VM doesn't corrupt the base image.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-4-kraxel@redhat.com>
[AJB: added tags]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Allways ask ssh to run with a pseudo terminal.
Not having a terminal causes problems now and then.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-3-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Packages are fetched via proxy that way, if configured on the host.
That might be required to pass firewalls, and it allows to route
package downloads through a caching proxy server.
Needs AcceptEnv setup in sshd_config on the guest side to work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-2-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Possibly because of different behavior on the newly update
cloud-image, trying to run 'apt-get build-dep' results in:
E: You must put some 'source' URIs in your sources.list
This enables all source repos (even though some are not
needed) for simplicity sake.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613130718.3763-5-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's a good practice to always have the same components used in tests.
According to:
https://cloud-images.ubuntu.com/releases/16.04/
New images are released from time to time, and the "release/"
directory points to the latest release. Let's pin to the latest
available version, and while at it, set a hash for verification.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613130718.3763-4-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Python's os.rename() will silently replace an existing file,
so there's no need for the extra check and removal.
Reference: https://docs.python.org/3/library/os.html#os.rename
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613130718.3763-3-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The image copy is only really needed because xz doesn't know to
properly decompress a file not named properly. Instead of
decompressing to stdout, and having to rely on a shell, let's just
create a link instead of copying the file.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613130718.3763-2-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's not obvious that something named __init__.py actually houses
important code that isn't relevant to python packaging glue. Move the
QEMUMachine and related error classes out into their own module.
Adjust users to the new import location.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190627212816.27298-2-jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add proper unicode handling when processing strings.
Also need to explicitly say we want int not float.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190520124716.30472-3-kraxel@redhat.com>
[AJB: fix conflicts with tests/vm: Port basevm to Python 3]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Added description of variables missing on vm-test help.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190329210804.22121-6-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
`make vm-build-centos` run docker-based tests on CentOS. The
created containers should have network otherwise some tests
fail. Also fixed the BUILD_SCRIPT template to correctly
evaluate "V=1" for verbose output.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190329210804.22121-5-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixed tests/vm/basevm.py to run with Python 3:
- hashlib.sha1() requires an binary encoded object.
- uses floor division ("//") (PEP 238).
- decode bytes to unicode when needed.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190329210804.22121-3-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Changed the vm-test makefile to execute python scripts
with the interpreter configured on build. This allows to
run vm-test targets properly in Linux distros with Python 3
only support.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190329210804.22121-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
