For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
Recent kernels have moved to keeping the userspace headers
in uapi/ subdirectories. This breaks the detection of whether an
architecture has KVM support in the kernel because kvm.h has
moved in the kernel source tree. Update the check to support
both the old and new locations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Change the kvm_cpu_fill_host() function to use
kvm_arch_get_supported_cpuid() instead of running the CPUID instruction
directly, when checking for supported CPUID features.
This should solve two problems at the same time:
* "-cpu host" was not enabling features that don't need support on
the host CPU (e.g. x2apic);
* "check" and "enforce" options were not detecting problems when the
host CPU did support a feature, but the KVM kernel code didn't
support it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Rationale:
* "-cpu host" is available only when using KVM
* The current implementation of -cpu check/enforce
(check_features_against_host()) makes sense only when using KVM.
So this makes the functions check_features_against_host() and
cpu_x86_fill_host() KVM-specific, document them as such, and rename them
to kvm_check_features_against_host() and kvm_cpu_fill_host().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The return value of that function is always 0, and is always ignored.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -tdf option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port drive boot option. From the qemu-kvm original commit message:
We do not want to maintain this option forever. It will be removed after
a grace period of a few releases. So warn the user that this option has
no effect and will become invalid soon.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-pit-reinjection.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-pit option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-irqchip option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Allow RAM size to be configurable for cirrus, to allow migration
compatibility from qemu-kvm.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently "-cpu host,-kvmclock,-kvm_nopiodelay,-kvm_mmu" does not
turn off all bits in CPUID 0x40000001 EAX.
The missing ones is KVM_FEATURE_STEAL_TIME.
This adds the name kvm_steal_time.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Now that CPUID leaf 7 features can be enabled/disabled on the
command-line, we need to filter them properly using GET_SUPPORTED_CPUID,
at the same place where other features are filtered out.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cosmetic, but it will also help to make futher patches easier to review.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
cpu.c contains the code that will check if all requested CPU features
are available, so the filtering of KVM features must be there, so we can
implement "check" and "enforce" properly.
The only point where kvm_arch_init_vcpu() is called on i386 is:
- cpu_x86_init()
- x86_cpu_realize() (after cpu_x86_register() is called)
- qemu_init_vcpu()
- qemu_kvm_start_vcpu()
- qemu_kvm_thread_fn() (on a new thread)
- kvm_init_vcpu()
- kvm_arch_init_vcpu()
With this patch, the filtering will be done earlier, at:
- cpu_x86_init()
- cpu_x86_register() (before x86_cpu_realize() is called)
Also, the KVM CPUID filtering will now be done at the same place where
the TCG CPUID feature filtering is done. Later, the code can be changed
to use the same filtering code for the "check" and "enforce" modes, as
now the cpu.c code knows exactly which CPU features are going to be
exposed to the guest (and much earlier).
One thing I was worrying about when doing this is that
kvm_arch_get_supported_cpuid() depends on kvm_irqchip_in_kernel(), and
maybe the 'kvm_kernel_irqchip' global variable wasn't initialized yet at
CPU creation time. But kvm_kernel_irqchip is initialized during
kvm_init(), that is called very early (much earlier than the machine
init function), and kvm_init() is already a requirement to run the
GET_SUPPORTED_CPUID ioctl() (as kvm_init() initializes the kvm_state
global variable).
Side note: it would be nice to keep KVM-specific code inside kvm.c. The
problem is that properly implementing -cpu check/enforce code (that's
inside cpu.c) depends directly on the feature bit filtering done using
kvm_arch_get_supported_cpuid(). Currently -cpu check/enforce is broken
because it simply uses the host CPU feature bits instead of
GET_SUPPORTED_CPUID, and we need to fix that.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This way all the filtering by GET_SUPPORTED_CPUID is being done at the
same place in the code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of masking the KVM feature bits very late (while building the
KVM_SET_CPUID2 data), mask it out on env->cpuid_kvm_features, at the
same point where the other feature words are masked out.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This is necessary so that x2apic is not improperly enabled when the
in-kernel irqchip is disabled.
This won't generate a warning with "-cpu ...,check" because the current
check/enforce code is broken (it checks the host CPU data directly,
instead of using kvm_arch_get_supported_cpuid()), but it will be
eventually fixed to properly report the missing x2apic flag.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This moves the CPUID_EXT_TSC_DEADLINE_TIMER CPUID flag hacking from
kvm_arch_init_vcpu() to kvm_arch_get_supported_cpuid().
Full git grep for kvm_arch_get_supported_cpuid:
kvm.h:uint32_t kvm_arch_get_supported_cpuid(KVMState *env, uint32_t function,
target-i386/cpu.c: x86_cpu_def->cpuid_7_0_ebx_features = kvm_arch_get_supported_cpuid(kvm_state, 0x7, 0, R_EBX);
target-i386/cpu.c: *eax = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EAX);
target-i386/cpu.c: *ebx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EBX);
target-i386/cpu.c: *ecx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_ECX);
target-i386/cpu.c: *edx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EDX);
target-i386/cpu.c: *eax = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EAX);
target-i386/cpu.c: *ebx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EBX);
target-i386/cpu.c: *ecx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_ECX);
target-i386/cpu.c: *edx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EDX);
target-i386/kvm.c:uint32_t kvm_arch_get_supported_cpuid(KVMState *s, uint32_t function,
target-i386/kvm.c: cpuid_1_edx = kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
target-i386/kvm.c: env->cpuid_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
* target-i386/kvm.c: env->cpuid_ext_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_ECX);
target-i386/kvm.c: env->cpuid_ext2_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
target-i386/kvm.c: env->cpuid_ext3_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
target-i386/kvm.c: env->cpuid_svm_features &= kvm_arch_get_supported_cpuid(s, 0x8000000A,
target-i386/kvm.c: kvm_arch_get_supported_cpuid(s, KVM_CPUID_FEATURES, 0, R_EAX);
target-i386/kvm.c: kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX);
Note that there is only one call for CPUID[1].ECX above (*), and it is
the one that gets hacked to include CPUID_EXT_TSC_DEADLINE_TIMER, so we
can simply make kvm_arch_get_supported_cpuid() set it, to let the rest
of the code know the flag can be safely set by QEMU.
One thing I was worrying about when doing this is that now
kvm_arch_get_supported_cpuid() depends on kvm_irqchip_in_kernel(). But
the 'kvm_kernel_irqchip' global variable is initialized during
kvm_init(), that is called very early, and kvm_init() is already a
requirement to run the GET_SUPPORTED_CPUID ioctl() (as kvm_init() is the
function that initializes the 'kvm_state' global variable).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Additional fixups will be added, and making them a single 'if/else if'
chain makes it clearer than two nested switch statements.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The reg switch will be moved to a separate function, so store the entry
pointer in a variable.
No behavior change, just code movement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of a function-specific has_kvm_features variable, simply use a
"found" variable that will be checked in case we have to use the legacy
get_para_features() interface.
No behavior change, just code cleanup.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The for loop will become a separate function, so clean it up so it can
become independent from the bit hacking for R_EDX.
No behavior change[1], just code movement.
[1] Well, only if the kernel returned CPUID leafs 1 or 0x80000001 as
unsupported, but there's no kernel version that does that.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Adapt emulate_spapr_hypercall() accordingly.
Needed for changing spapr_hypercall() argument type to PowerPCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Needed for changing cpu_has_work() argument type to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Needed for changing qemu_cpu_kick() argument type to CPUState and
for moving halted field into CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer needed except for iterating the CPUs.
Needed for qemu_tcg_init_vcpu().
KVM and dummy threads still need CPUArchState for cpu_single_env.
Signed-off-by: Andreas Färber <afaerber@suse.de>