Introduce "nvdimm" device which is based on pc-dimm device type
Currently, nothing is specific for nvdimm but hotplug is disabled
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for memory-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-21-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
it allows safely cancel memory hotplug if vhost backend
doesn't support necessary amount of memory slots and prevents
QEMU crashing in vhost due to hitting vhost limit on amount
of supported memory ranges.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc_dimm_realize() validates the NUMA node to which memory hotplug is
being performed only in case of NUMA configuration. Include a check to
fail for invalid nodes in case of non-NUMA configuration too.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
setting gap to TRUE will make sparse DIMM
address auto allocation, leaving gaps between
a new DIMM address and preceeding existing DIMM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Start storing the (start_addr, end_addr) of the pc-dimm memory
in corresponding numa_info[node] so that this information can be used
to lookup node by address.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
pc_dimm_plug() has code that will be needed for memory plug handlers
in other archs too. Extract code from pc_dimm_plug() into a generic
routine pc_dimm_memory_plug() that resides in pc-dimm.c. Also
correspondingly refactor re-usable unplug code into pc_dimm_memory_unplug().
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Drop superfluous pc-dimm alignment on hot-pluggable mem
range size assert, since it causes QEMU crash during hotplug
when hotplugging pc-dimm with alignment bigger than
an alignment of hot-pluggable mem range size.
Instead allow pc_dimm_get_free_addr() find free address
and bail out gracefully later in that function during
checking if pc-dimm will fit in hot-pluggable mem range.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The pc-dimm option presented on device list (by argument "-device \?")
is the unique option that don't have any information about it. This
patch adds a description for the pc-dimm device to help users to
identify it.
Signed-off-by: Paulo Vital <paulo.vital@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The global parameter 'ram_size' does not take into account
the hotplugged memory.
In some codes, we use 'ram_size' as current VM's real RAM size,
which is not correct.
Add function 'get_current_ram_size' to calculate VM's current RAM size,
it will enumerate present memory devices and also plus ram_size.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Not all sysemu.h users need the NUMA declarations, and keeping them in a
separate file makes it easier to see what are the interfaces provided by
numa.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that pc_existing_dimms_capacity() is an API, include Error pointer
as an argument and modify the caller appropriately.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Move pc_existing_dimms_capacity() to pc-dimm.c since it would be needed
by PowerPC memory hotplug code too.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running in KVM mode, kvm_set_phys_mem() will silently
fail if registered MemoryRegion address/size is not page
aligned. Causing memory hotplug failure in guest.
Mapping non aligned MemoryRegion in TCG mode 'works', but
sane guest OS still expects page aligned memory module
and fails to initialize it if it's not aligned.
So do not allow non aligned (i.e. valid) address/size
values for DIMM to avoid either KVM failure or guest
issues caused by it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It should not break memory hotplug feature if there is non-NUMA option.
This patch would also allow to use pc-dimm as replacement for initial memory
for non-NUMA configs.
Note: After this patch, the memory hotplug can work normally for Linux guest OS
when there is non-NUMA option and NUMA option. But not support Windows guest OS
to hotplug memory with no-NUMA config, actully, it's Windows limitation.
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If user specifies a node number that exceeds the available numa nodes in
emulated system for pc-dimm device, the device will report an invalid _PXM
to OSPM. Fix this by checking the node property value.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
fixes QEMU abort in case it's started without memory
hotplug enabled.
as result of fix it will print following messages:
"
-device pc-dimm,id=d1,memdev=m1: memory hotplug is not enabled, enable it on startup
-device pc-dimm,id=d1,memdev=m1: Device 'pc-dimm' could not be initialized
"
Also fixup assert condition to detect hotplug address
space overflow.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- if slot property is not specified on -device/device_add command,
treat default value as request for assigning PCDIMMDevice to
the first free slot.
- if slot is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- if 'addr' property is not specified on -device/device_add command,
treat the default value as request for assigning PCDIMMDevice to
the first free memory region.
- if 'addr' is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied or falls inside
of an existing PCDIMMDevice memory region.
Note:
GCompareFunc(a, b) used by g_slist_insert_sorted() returns 'gint',
however it might be too small to fit difference between
2 addresses. So use 128bit to calculate the difference and normalize
result to -1/0/1 return values.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andrey Korolyov <andrey@xdel.ru>
MST: commit log tweaks
using the same memdev backend more than once will cause
assertion at MemoryRegion mapping time because it's already
mapped. Prevent it by checking that the associated MemoryRegion
is not mapped.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: tweak commit log
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
guest address space
Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.
To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
