... in order to advertise the XEN_HVM_CPUID_UPCALL_VECTOR feature,
which will come in a subsequent commit.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Paul Durrant <paul@xen.org>
A previous implementation of this stuff used a 64-bit field for all of
the port information (vcpu/type/type_val) and did atomic exchanges on
them. When I implemented that in Qemu I regretted my life choices and
just kept it simple with locking instead.
So there's no need for the XenEvtchnPort to be so simplistic. We can
use a union for the pirq/virq/interdomain information, which lets us
keep a separate bit for the 'remote domain' in interdomain ports. A
single bit is enough since the only possible targets are loopback or
qemu itself.
So now we can ditch PORT_INFO_TYPEVAL_REMOTE_QEMU and the horrid
manual masking, although the in-memory representation is identical
so there's no change in the saved state ABI.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The xen_evtchn_soft_reset() function requires the iothread mutex, but is
also called for the EVTCHNOP_reset hypercall. Ensure the mutex is taken
in that case.
Cc: qemu-stable@nongnu.org
Fixes: a15b10978f ("hw/xen: Implement EVTCHNOP_reset")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
When fire_watch_cb() found the response buffer empty, it would call
deliver_watch() to generate the XS_WATCH_EVENT message in the response
buffer and send an event channel notification to the guest… without
actually *copying* the response buffer into the ring. So there was
nothing for the guest to see. The pending response didn't actually get
processed into the ring until the guest next triggered some activity
from its side.
Add the missing call to put_rsp().
It might have been slightly nicer to call xen_xenstore_event() here,
which would *almost* have worked. Except for the fact that it calls
xen_be_evtchn_pending() to check that it really does have an event
pending (and clear the eventfd for next time). And under Xen it's
defined that setting that fd to O_NONBLOCK isn't guaranteed to work,
so the emu implementation follows suit.
This fixes Xen device hot-unplug.
Cc: qemu-stable@nongnu.org
Fixes: 0254c4d19d ("hw/xen: Add xenstore wire implementation and implementation stubs")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The refcounts actually correspond to 'active_ref' structures stored in a
GHashTable per "user" on the backend side (mostly, per XenDevice).
If we zero map_track[] on reset, then when the backend drivers get torn
down and release their mapping we hit the assert(s->map_track[ref] != 0)
in gnt_unref().
So leave them in place. Each backend driver will disconnect and reconnect
as the guest comes back up again and reconnects, and it all works out OK
in the end as the old refs get dropped.
Cc: qemu-stable@nongnu.org
Fixes: de26b26197 ("hw/xen: Implement soft reset for emulated gnttab")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
A guest which has configured the per-vCPU upcall vector may set the
HVM_PARAM_CALLBACK_IRQ param to fairly much anything other than zero.
For example, Linux v6.0+ after commit b1c3497e604 ("x86/xen: Add support
for HVMOP_set_evtchn_upcall_vector") will just do this after setting the
vector:
/* Trick toolstack to think we are enlightened. */
if (!cpu)
rc = xen_set_callback_via(1);
That's explicitly setting the delivery to GSI#1, but it's supposed to be
overridden by the per-vCPU vector setting. This mostly works in Qemu
*except* for the logic to enable the in-kernel handling of event channels,
which falsely determines that the kernel cannot accelerate GSI delivery
in this case.
Add a kvm_xen_has_vcpu_callback_vector() to report whether vCPU#0 has
the vector set, and use that in xen_evtchn_set_callback_param() to
enable the kernel acceleration features even when the param *appears*
to be set to target a GSI.
Preserve the Xen behaviour that when HVM_PARAM_CALLBACK_IRQ is set to
*zero* the event channel delivery is disabled completely. (Which is
what that bizarre guest behaviour is working round in the first place.)
Cc: qemu-stable@nongnu.org
Fixes: 91cce75617 ("hw/xen: Add xen_evtchn device for event channel emulation")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This was introduced in KVM in Linux 2.6.33, we can require it
unconditionally. KVM_CLOCK_TSC_STABLE was only added in Linux 4.9,
for now do not require it (though it would allow the removal of some
pretty yucky code).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
kvm_pc_setup_irq_routing() is only defined for x86 targets (in
hw/i386/kvm/apic.c). Its declaration is pointless on all
other targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_has_pit_state2() is only defined for x86 targets (in
target/i386/kvm/kvm.c). Its declaration is pointless on
all other targets. Have it return a boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-13-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvmclock_create() is only implemented in hw/i386/kvm/clock.h.
Restrict the "hw/kvm/clock.h" header to i386 by moving it to
hw/i386/.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230620083228.88796-3-philmd@linaro.org>
We shouldn't call kvmclock_create() when KVM is not available
or disabled:
- check for kvm_enabled() before calling it
- assert KVM is enabled once called
Since the call is elided when KVM is not available, we can
remove the stub (it is never compiled).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230620083228.88796-2-philmd@linaro.org>
Fuzzing showed that a guest could bind an interdomain port to itself, by
guessing the next port to be allocated and putting that as the 'remote'
port number. By chance, that works because the newly-allocated port has
type EVTCHNSTAT_unbound. It shouldn't.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230801175747.145906-4-dwmw2@infradead.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity points out (CID 1508128) a bounds checking error. We need to check
for gsi >= IOAPIC_NUM_PINS, not just greater-than.
Also fix up an assert() that has the same problem, that Coverity didn't see.
Fixes: 4f81baa33e ("hw/xen: Support GSI mapping to PIRQ")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230801175747.145906-2-dwmw2@infradead.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity was unhappy (CID 1508359) because we didn't check the return of
init_walk_op() in transaction_commit(), despite doing so at every other
call site.
Strictly speaking, this is a false positive since it can never fail. It
only fails for invalid user input (transaction ID or path), and both of
those are hard-coded to known sane values in this invocation.
But Coverity doesn't know that, and neither does the casual reader of the
code.
Returning an error here would be weird, since the transaction *is*
committed by this point; all the walk_op is doing is firing watches on
the newly-committed changed nodes. So make it a g_assert(!ret), since
it really should never happen.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20076888f6bdf06a65aafc5cf954260965d45b97.camel@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverity points out that if (!s && !s->impl) isn't really what we intended
to do here. CID 1508131.
Fixes: 0324751272 ("hw/xen: Add emulated implementation of XenStore operations")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230412185102.441523-6-dwmw2@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
I initially put the basic platform init (overlay pages, grant tables,
event channels) into mc->kvm_type because that was the earliest place
that could sensibly test for xen_mode==XEN_EMULATE.
The intent was to do this early enough that we could then initialise the
XenBus and other parts which would have depended on them, from a generic
location for both Xen and KVM/Xen in the PC-specific code, as seen in
https://lore.kernel.org/qemu-devel/20230116221919.1124201-16-dwmw2@infradead.org/
However, then the Xen on Arm patches came along, and *they* wanted to
do the XenBus init from a 'generic' Xen-specific location instead:
https://lore.kernel.org/qemu-devel/20230210222729.957168-4-sstabellini@kernel.org/
Since there's no generic location that covers all three, I conceded to
do it for XEN_EMULATE mode in pc_basic_devices_init().
And now there's absolutely no point in having some of the platform init
done from pc_machine_kvm_type(); we can move it all up to live in a
single place in pc_basic_devices_init(). This has the added benefit that
we can drop the separate xen_evtchn_connect_gsis() function completely,
and pass just the system GSIs in directly to xen_evtchn_create().
While I'm at it, it does no harm to explicitly pass in the *number* of
said GSIs, because it does make me twitch a bit to pass an array of
impicit size. During the lifetime of the KVM/Xen patchset, that had
already changed (albeit just cosmetically) from GSI_NUM_PINS to
IOAPIC_NUM_PINS.
And document a bit better that this is for the *output* GSI for raising
CPU0's events when the per-CPU vector isn't available. The fact that
we create a whole set of them and then only waggle the one we're told
to, instead of having a single output and only *connecting* it to the
GSI that it should be connected to, is still non-intuitive for me.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230412185102.441523-2-dwmw2@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Both TYPE_KVM_I8254 and TYPE_I8254 have their own but same implementation of
the "iobase" property. The storage for the property already resides in
PITCommonState, so also move the property definition there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230523195608.125820-2-shentey@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need to suspend activity between aio_disable_external() and
aio_enable_external(), which is mainly used for the block layer's drain
operation.
This is part of ongoing work to remove the aio_disable_external() API.
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-9-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This is only part of it; we will also need to get the PV back end drivers
to tear down their own mappings (or do it for them, but they kind of need
to stop using the pointers too).
Some more work on the actual PV back ends and xen-bus code is going to be
needed to really make soft reset and migration fully functional, and this
part is the basis for that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
We don't actually access the guest's page through the grant, because
this isn't real Xen, and we can just use the page we gave it in the
first place. Map the grant anyway, mostly for cosmetic purposes so it
*looks* like it's in use in the guest-visible grant table.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Now that we have an internal implementation of XenStore, we can populate
the xenstore_backend_ops to allow PV backends to talk to it.
Watches can't be processed with immediate callbacks because that would
call back into XenBus code recursively. Defer them to a QEMUBH to be run
as appropriate from the main loop. We use a QEMUBH per XS handle, and it
walks all the watches (there shouldn't be many per handle) to fire any
which have pending events. We *could* have done it differently but this
allows us to use the same struct watch_event as we have for the guest
side, and keeps things relatively simple.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is limited to mapping a single grant at a time, because under Xen the
pages are mapped *contiguously* into qemu's address space, and that's very
hard to do when those pages actually come from anonymous mappings in qemu
in the first place.
Eventually perhaps we can look at using shared mappings of actual objects
for system RAM, and then we can make new mappings of the same backing
store (be it deleted files, shmem, whatever). But for now let's stick to
a page at a time.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
We provided the backend-facing evtchn functions very early on as part of
the core Xen platform support, since things like timers and xenstore need
to use them.
By what may or may not be an astonishing coincidence, those functions
just *happen* all to have exactly the right function prototypes to slot
into the evtchn_backend_ops table and be called by the PV backends.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This implements the basic migration support in the back end, with unit
tests that give additional confidence in the node-counting already in
the tree.
However, the existing PV back ends like xen-disk don't support migration
yet. They will reset the ring and fail to continue where they left off.
We will fix that in future, but not in time for the 8.0 release.
Since there's also an open question of whether we want to serialize the
full XenStore or only the guest-owned nodes in /local/domain/${domid},
for now just mark the XenStore device as unmigratable.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Store perms as a GList of strings, check permissions.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Firing watches on the nodes that still exist is relatively easy; just
walk the tree and look at the nodes with refcount of one.
Firing watches on *deleted* nodes is more fun. We add 'modified_in_tx'
and 'deleted_in_tx' flags to each node. Nodes with those flags cannot
be shared, as they will always be unique to the transaction in which
they were created.
When xs_node_walk would need to *create* a node as scaffolding and it
encounters a deleted_in_tx node, it can resurrect it simply by clearing
its deleted_in_tx flag. If that node originally had any *data*, they're
gone, and the modified_in_tx flag will have been set when it was first
deleted.
We then attempt to send appropriate watches when the transaction is
committed, properly delete the deleted_in_tx nodes, and remove the
modified_in_tx flag from the others.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Given that the whole thing supported copy on write from the beginning,
transactions end up being fairly simple. On starting a transaction, just
take a ref of the existing root; swap it back in on a successful commit.
The main tree has a transaction ID too, and we keep a record of the last
transaction ID given out. if the main tree is ever modified when it isn't
the latest, it gets a new transaction ID.
A commit can only succeed if the main tree hasn't moved on since it was
forked. Strictly speaking, the XenStore protocol allows a transaction to
succeed as long as nothing *it* read or wrote has changed in the interim,
but no implementations do that; *any* change is sufficient to abort a
transaction.
This does not yet fire watches on the changed nodes on a commit. That bit
is more fun and will come in a follow-on commit.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Starts out fairly simple: a hash table of watches based on the path.
Except there can be multiple watches on the same path, so the watch ends
up being a simple linked list, and the head of that list is in the hash
table. Which makes removal a bit of a PITA but it's not so bad; we just
special-case "I had to remove the head of the list and now I have to
replace it in / remove it from the hash table". And if we don't remove
the head, it's a simple linked-list operation.
We do need to fire watches on *deleted* nodes, so instead of just a simple
xs_node_unref() on the topmost victim, we need to recurse down and fire
watches on them all.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is a fairly simple implementation of a copy-on-write tree.
The node walk function starts off at the root, with 'inplace == true'.
If it ever encounters a node with a refcount greater than one (including
the root node), then that node is shared with other trees, and cannot
be modified in place, so the inplace flag is cleared and we copy on
write from there on down.
Xenstore write has 'mkdir -p' semantics and will create the intermediate
nodes if they don't already exist, so in that case we flip the inplace
flag back to true as we populate the newly-created nodes.
We put a copy of the absolute path into the buffer in the struct walk_op,
with *two* NUL terminators at the end. As xs_node_walk() goes down the
tree, it replaces the next '/' separator with a NUL so that it can use
the 'child name' in place. The next recursion down then puts the '/'
back and repeats the exercise for the next path element... if it doesn't
hit that *second* NUL termination which indicates the true end of the
path.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This implements the basic wire protocol for the XenStore commands, punting
all the actual implementation to xs_impl_* functions which all just return
errors for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The default number of PIRQs is set to 256 to avoid issues with 32-bit MSI
devices. Allow it to be increased if the user desires.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The way that Xen handles MSI PIRQs is kind of awful.
There is a special MSI message which targets a PIRQ. The vector in the
low bits of data must be zero. The low 8 bits of the PIRQ# are in the
destination ID field, the extended destination ID field is unused, and
instead the high bits of the PIRQ# are in the high 32 bits of the address.
Using the high bits of the address means that we can't intercept and
translate these messages in kvm_send_msi(), because they won't be caught
by the APIC — addresses like 0x1000fee46000 aren't in the APIC's range.
So we catch them in pci_msi_trigger() instead, and deliver the event
channel directly.
That isn't even the worst part. The worst part is that Xen snoops on
writes to devices' MSI vectors while they are *masked*. When a MSI
message is written which looks like it targets a PIRQ, it remembers
the device and vector for later.
When the guest makes a hypercall to bind that PIRQ# (snooped from a
marked MSI vector) to an event channel port, Xen *unmasks* that MSI
vector on the device. Xen guests using PIRQ delivery of MSI don't
ever actually unmask the MSI for themselves.
Now that this is working we can finally enable XENFEAT_hvm_pirqs and
let the guest use it all.
Tested with passthrough igb and emulated e1000e + AHCI.
CPU0 CPU1
0: 65 0 IO-APIC 2-edge timer
1: 0 14 xen-pirq 1-ioapic-edge i8042
4: 0 846 xen-pirq 4-ioapic-edge ttyS0
8: 1 0 xen-pirq 8-ioapic-edge rtc0
9: 0 0 xen-pirq 9-ioapic-level acpi
12: 257 0 xen-pirq 12-ioapic-edge i8042
24: 9600 0 xen-percpu -virq timer0
25: 2758 0 xen-percpu -ipi resched0
26: 0 0 xen-percpu -ipi callfunc0
27: 0 0 xen-percpu -virq debug0
28: 1526 0 xen-percpu -ipi callfuncsingle0
29: 0 0 xen-percpu -ipi spinlock0
30: 0 8608 xen-percpu -virq timer1
31: 0 874 xen-percpu -ipi resched1
32: 0 0 xen-percpu -ipi callfunc1
33: 0 0 xen-percpu -virq debug1
34: 0 1617 xen-percpu -ipi callfuncsingle1
35: 0 0 xen-percpu -ipi spinlock1
36: 8 0 xen-dyn -event xenbus
37: 0 6046 xen-pirq -msi ahci[0000:00:03.0]
38: 1 0 xen-pirq -msi-x ens4
39: 0 73 xen-pirq -msi-x ens4-rx-0
40: 14 0 xen-pirq -msi-x ens4-rx-1
41: 0 32 xen-pirq -msi-x ens4-tx-0
42: 47 0 xen-pirq -msi-x ens4-tx-1
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This wires up the basic infrastructure but the actual interrupts aren't
there yet, so don't advertise it to the guest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Just hook up the basic hypercalls to stubs in xen_evtchn.c for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Extract requests, return ENOSYS to all of them. This is enough to allow
older Linux guests to boot, as they need *something* back but it doesn't
matter much what.
A full implementation of a single-tentant internal XenStore copy-on-write
tree with transactions and watches is waiting in the wings to be sent in
a subsequent round of patches along with hooking up the actual PV disk
back end in qemu, but this is enough to get guests booting for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Just the basic shell, with the event channel hookup. It only dumps the
buffer for now; a real ring implmentation will come in a subsequent patch.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The provides the QEMU side of interdomain event channels, allowing events
to be sent to/from the guest.
The API mirrors libxenevtchn, and in time both this and the real Xen one
will be available through ops structures so that the PV backend drivers
can use the correct one as appropriate.
For now, this implementation can be used directly by our XenStore which
will be for emulated mode only.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Introduce support for one shot and periodic mode of Xen PV timers,
whereby timer interrupts come through a special virq event channel
with deadlines being set through:
1) set_timer_op hypercall (only oneshot)
2) vcpu_op hypercall for {set,stop}_{singleshot,periodic}_timer
hypercalls
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
