Commit Graph

27 Commits

Author SHA1 Message Date
John Wang
5e623f2bf1 hw/misc: add an EMC141{3,4} device model
Largely inspired by the TMP421 temperature sensor, here is a model for
the EMC1413/EMC1414 temperature sensors.

Specs can be found here :
  http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf

Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-12-10 12:11:03 +01:00
Bin Meng
0f25065cb6 hw/misc: Add Microchip PolarFire SoC SYSREG module support
This creates a minimum model for Microchip PolarFire SoC SYSREG
module. It only implements the ENVM_CR register to tell guest
software that eNVM is running at the configured divider rate.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-7-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03 07:17:23 -08:00
Bin Meng
a937b30283 hw/misc: Add Microchip PolarFire SoC IOSCB module support
This creates a model for PolarFire SoC IOSCB [1] module. It actually
contains lots of sub-modules like various PLLs to control different
peripherals. Only the mininum capabilities are emulated to make the
HSS DDR memory initialization codes happy. Lots of sub-modules are
created as an unimplemented devices.

[1] PF_SoC_RegMap_V1_1/MPFS250T/mpfs250t_ioscb_memmap_dri.htm in
    https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-5-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03 07:17:23 -08:00
Bin Meng
3400b15bbe hw/misc: Add Microchip PolarFire SoC DDR Memory Controller support
The PolarFire SoC DDR Memory Controller mainly includes 2 modules,
called SGMII PHY module and the CFG module, as documented in the
chipset datasheet.

This creates a single file that groups these 2 modules, providing
the minimum functionalities that make the HSS DDR initialization
codes happy.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-3-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03 07:17:23 -08:00
Philippe Mathieu-Daudé
435db7ebf5 hw/misc/mps2-scc: Use the LED device
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical
Reference Manual' (100112_0200_07_en):

  2.1  Overview of the MPS2 and MPS2+ hardware

       The MPS2 and MPS2+ FPGA Prototyping Boards contain the
       following components and interfaces:

       * User switches and user LEDs:

         - Two green LEDs and two push buttons that connect to
           the FPGA.
         - Eight green LEDs and one 8-way dip switch that connect
           to the MCC.

Add the 8 LEDs connected to the MCC.

This replaces the 'mps2_scc_leds' trace events by the generic
'led_set_intensity' event.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20200912134041.946260-7-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Philippe Mathieu-Daudé
65ad1da23e hw/misc/mps2-fpgaio: Use the LED device
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical
Reference Manual' (100112_0200_07_en):

  2.1  Overview of the MPS2 and MPS2+ hardware

       The MPS2 and MPS2+ FPGA Prototyping Boards contain the
       following components and interfaces:

       * User switches and user LEDs:

         - Two green LEDs and two push buttons that connect to
           the FPGA.
         - Eight green LEDs and one 8-way dip switch that connect
           to the MCC.

Add the 2 LEDs connected to the FPGA.

This replaces the 'mps2_fpgaio_leds' trace events by the generic
'led_set_intensity' event.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20200912134041.946260-6-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Philippe Mathieu-Daudé
c1b2982627 hw/misc/led: Add a LED device
Add a LED device which can be connected to a GPIO output.
They can also be dimmed with PWM devices. For now we do
not implement the dimmed mode, but in preparation of a
future implementation, we start using the LED intensity.

LEDs are limited to a fixed set of colors.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200912134041.946260-2-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Bin Meng
a4b84608ba hw/riscv: Move sifive_test model to hw/misc
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_test model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Bin Meng
0fa9e32945 hw/riscv: Move sifive_u_otp model to hw/misc
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_u_otp model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Bin Meng
9fe640a53d hw/riscv: Move sifive_u_prci model to hw/misc
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_u_prci model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Bin Meng
89ece6f76f hw/riscv: Move sifive_e_prci model to hw/misc
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_e_prci model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Michael Rolnik
dc288de082 hw/misc: avr: Add limited support for power reduction device
This is a simple device of just one register, and whenever this
register is written to it calls qemu_set_irq function for each
of 8 bits/IRQs. It is used to implement AVR Power Reduction.

[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash include fix and file rename from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-22-huth@tuxfamily.org>
2020-07-11 11:02:05 +02:00
Alistair Francis
e64d8c83f9 hw/misc: Add the STM32F4xx EXTI device
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ef941d59fd8658589d34ed432e1d6dfdcf7fb1d0.1576658572.git.alistair@alistair23.me
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17 14:09:29 +00:00
Alistair Francis
870c034da0 hw/misc: Add the STM32F4xx Sysconfig device
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 49b01423a09cef2ca832ff73a84a996568f1a8fc.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17 14:09:29 +00:00
Laurent Vivier
87a34e2adb hw/m68k: implement ADB bus support for via
VIA needs to be able to poll the ADB interface and to read/write data
from/to the bus.

This patch adds functions allowing that.

Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-7-laurent@vivier.eu>
2019-10-28 19:06:45 +01:00
Laurent Vivier
6dca62a000 hw/m68k: add VIA support
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used
to interface the keyboard, Mouse, and real-time clock. It also provides
control line for the floppy disk driver, video interface, sound circuitry
and serial interface.

This implementation is based on the MOS6522 object.

Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-6-laurent@vivier.eu>
2019-10-28 19:06:42 +01:00
Thomas Huth
5aa78a8957 hw/misc: Add a config switch for the "unimplemented" device
The device is only used by some few boards. Let's use a proper Kconfig
switch so that we only compile this code if we really need it.

Message-Id: <20190817101931.28386-8-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-08-20 09:11:17 +02:00
Thomas Huth
73129f43dd hw/arm: Express dependencies of the fsl-imx31 machine with Kconfig
Add Kconfig dependencies for the fsl-imx31 / kzm machine.
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:31 +02:00
Paolo Bonzini
d6c1bd4a22 kconfig: add dependencies on CONFIG_MSI_NONBROKEN
For devices that require msi_init/msix_init to succeed, add a
dependency on CONFIG_MSI_NONBROKEN.  This will prevent those devices
from appearing in a binary that cannot instantiate them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-18 09:39:57 +01:00
Paolo Bonzini
8c75eec06d sparc-softmmu.mak: express dependencies with Kconfig
%-softmmu.mak only keep boards and optional device
definitions in Kconfig mode.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:46:19 +01:00
Thomas Huth
d7cfb520cf ppc: Express dependencies of the Mac machines with kconfig
This will make it for example easier if the users want to disable
one of the two machines for their builds.

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:46:19 +01:00
Paolo Bonzini
9533dcdd41 ptimer: express dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-39-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
1550b0e6bf i2c: express dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
a7e2315907 isa: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
7c28b925b7 build: convert pci.mak to Kconfig
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available.  However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.

Done mostly with the following script:

  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y if PCI_DEVICES\' -e'    depends on PCI' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/pci.mak

followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00