Our example should use the correct quotes to match what someone
could actually pass over the wire.
* qmp-commands.hx: Use correct JSON quotes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
expose the count that logs the times of updating the dirty bitmap to
end user.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Stefan Fritsch just fixed a virtio-net driver bug [1], virtio-net won't
filter out VLAN-tagged packets if VIRTIO_NET_F_CTRL_VLAN isn't negotiated.
This patch added a new field to @RxFilterInfo to indicate vlan receive
state ('normal', 'none', 'all'). If VIRTIO_NET_F_CTRL_VLAN isn't
negotiated, vlan receive state will be 'all', then all VLAN-tagged packets
will be received by guest.
This patch also fixed a boundary issue in visiting vlan table.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2014-02/msg02604.html
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The "query-iothreads" command returns a list of information about
iothreads. See the patch for API documentation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'query-dump-guest-memory-capability' is used to query the available formats for
'dump-guest-memory'. The output of the command will be like:
-> { "execute": "query-dump-guest-memory-capability" }
<- { "return": { "formats":
["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make monitor command 'dump-guest-memory' be able to dump in kdump-compressed
format. The command's usage:
dump [-p] protocol [begin] [length] [format]
'format' is used to specified the format of vmcore and can be:
1. 'elf': ELF format, without compression
2. 'kdump-zlib': kdump-compressed format, with zlib-compressed
3. 'kdump-lzo': kdump-compressed format, with lzo-compressed
4. 'kdump-snappy': kdump-compressed format, with snappy-compressed
Without 'format' being set, it is same as 'elf'. And if non-elf format is
specified, paging and filter is not allowed.
Note:
1. The kdump-compressed format is readable only with the crash utility and
makedumpfile, and it can be smaller than the ELF format because of the
compression support.
2. The kdump-compressed format is the 6th edition.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Introduce 'query-chardev-backends' QMP command which lists all
supported character device backends.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This updates the documentation for commiting snapshot images.
Specifically, this highlights what happens when the base image
is either smaller or larger than the snapshot image being committed.
In the case of the base image being smaller, it is resized to the
larger size of the snapshot image. In the case of the base image
being larger, it is not resized automatically, but once the commit
has completed it is safe for the user to truncate the base image.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
There was two candidate ways to implement named node manipulation:
1)
{ 'command': 'block_passwd', 'data': {'*device': 'str',
'*node-name': 'str', 'password': 'str'}
}
2)
{ 'command': 'block_passwd', 'data': {'device': 'str',
'*device-is-node': 'bool',
'password': 'str'} }
Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to
rewrite the QMP block interface for 2.0.
Luiz does not like in 1 the fact that 2 fields are optional but one of them must
be specified leading to an abuse of the QMP semantic.
Kevin argumented that 2 what a clear abuse of the device field and would not be
practical when reading fast some log file because the user would read "device"
and think that a device is manipulated when it's in fact a node name.
Documentation of 1 make it pretty clear what to do for the user.
Kevin argued that all bs are node including devices ones so 2 does not make
sense.
Kevin also argued that rewriting the QMP block interface would not make disapear
the current one.
Kevin pushed the argument that making the QAPI generator compatible with the
semantic of the operation would need a rewrite that no one has done yet.
A vote has been done on the list to elect the version to use and 1 won.
For reference the complete thread is:
"[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver
states."
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two commands that are the monitor counterparts of -object. The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
These two commands invoke the "unparent" method of Object.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This interface use id and name as optional parameters, to handle the
case that one image contain multiple snapshots with same name which
may be '', but with different id.
Adding parameter id is for historical compatiability reason, and
that case is not possible in qemu's new interface for internal
snapshot at block device level, but still possible in qemu-img.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unlike savevm, the qmp_transaction interface will not generate
snapshot name automatically, saving trouble to return information
of the new created snapshot.
Although qcow2 support storing multiple snapshots with same name
but different ID, here it will fail when an snapshot with that name
already exist before the operation. Format such as rbd do not support
ID at all, and in most case, it means trouble to user when he faces
multiple snapshots with same name, so ban that case. Request with
empty name will be rejected.
Snapshot ID can't be specified in this interface.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This feature can be used in case where users are avoiding the iops limit by
doing jumbo I/Os hammering the storage backend.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The max parameter of the leaky bucket throttling algorithm can be used to
allow the guest to do bursts.
The max value is a pool of I/O that the guest can use without being throttled
at all. Throttling is triggered once this pool is empty.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Per the qapi schema, block_set_io_throttle takes most arguments
as ints, not strings.
* qmp-commands.hx (block_set_io_throttle): Use correct type. Fix
whitespace and a copy-paste bug in the process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is the 'nmi' command that is used to trigger a guest dump via kdump feature on x86.
s390 uses RESTART interrupt to trigger kdump.
So, this patch provides a mean to use 'nmi' command on s390 to raise RESTART interrupt.
The CPU to receive the RESTART interrupt is the "default" one.
There is an infrastructure to select the "default" CPU using 'cpu' command.
The 'info cpus' command can be used to see which one is the "default".
In order to wire up the RESTART to 'nmi' command we had to:
1. implement the kvm_s390_cpu_restart function by exporting the existing code
2. implement s390_cpu_restart function as kvm-aware wrapper
3. modify the qmp_inject_nmi function to enable (for s390) the scan for
"default" CPU and call s390_cpu_restart for it;
3. fix some messages.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Was missing 'setup-time' in some of the QMP documentation...
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1376078746-24948-7-git-send-email-mrhines@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds sync-modes to the drive-backup interface and
implements the FULL, NONE and TOP modes of synchronization.
FULL performs as before copying the entire contents of the drive
while preserving the point-in-time using CoW.
NONE only copies new writes to the target drive.
TOP copies changes to the topmost drive image and preserves the
point-in-time using CoW.
For sync mode TOP are creating a new target image using the same backing
file as the original disk image. Then any new data that has been laid
on top of it since creation is copied in the main backup_run() loop.
There is an extra check in the 'TOP' case so that we don't bother to copy
all the data of the backing file as it already exists in the target.
This is where the bdrv_co_is_allocated() is used to determine if the
data exists in the topmost layer or below.
Also any new data being written is intercepted via the write_notifier
hook which ends up calling backup_do_cow() to copy old data out before
it gets overwritten.
For mode 'NONE' we create the new target image and only copy in the
original data from the disk image starting from the time the call was
made. This preserves the point in time data by only copying the parts
that are *going to change* to the target image. This way we can
reconstruct the final image by checking to see if the given block exists
in the new target image first, and if it does not, you can get it from
the original image. This is basically an optimization allowing you to
do point-in-time snapshots with low overhead vs the 'FULL' version.
Since there is no old data to copy out the loop in backup_run() for the
NONE case just calls qemu_coroutine_yield() which only wakes up after
an event (usually cancel in this case). The rest is handled by the
before_write notifier which again calls backup_do_cow() to write out
the old data so it can be preserved.
Signed-off-by: Ian Main <imain@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Amos Kong (1) and Luiz Capitulino (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
qmp: update send-key document
qapi: qapi-commands: fix possible leaks on visitor dealloc
Message-id: 1374093679-29213-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR5meNAAoJECgfDbjSjVRp24IIAMOkxbb85FJ323G/x5cQBzA/
gjFDmvB6geIMBorX1YZRnIM+RFhx+mkXtBTu2raWVTNTt5G2u3vAQQWW2zSiOTBL
gH4BhzJnUoqLHOydWql2MsGS7DMQo4Fq8OnzRBkZ119AEEqNMad1w2LykwFWs4ra
k3bsPNCZM+ZNiLMWtQLOcD3FYvoiISinqFd81KOnxvDiT90rczk4dLWqjv8smNif
WqZ7aCD1hGJ5yD7JI2YjCbhVvu4F7tBK+fWkT/O3oYslh/o241lyxUriOXMKdKML
04sNXa5eWue9cOKlbo1G+yfFwFg1JDsAMe/Usg0KXz1MMK91wiWE763ESPbFBK0=
=P+pr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pc: don't access fw cfg if NULL
virtio-net: add feature bit for any header s/g
net: add support of mac-programming over macvtap in QEMU side
pci: fix BRDIGE typo
pci-bridge: update mappings for migration/restore
Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit 9f328977 changes qmp_send_key() to accept key codes in hex,
but the document wasn't updated. The items of keys list is union
now, not enum.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.
Design:
QEMU notifies Libvirt when rx-filter config is changed in guest,
then Libvirt query the rx-filter information by a monitor command,
and sync the change to macvtap device. Related rx-filter config
of the nic contains main mac, rx-mode items and vlan table.
This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.
Test:
If we repeatedly add/remove vlan, and change macaddr of vlan
interfaces in guest by a loop script.
Result:
The events will flood the QMP client(management), management takes
too much resource to process the events.
Event_throttle API (set rate to 1 ms) can avoid the events to flood
QMP client, but it could cause an unexpected delay (~1ms), guests
guests normally expect rx-filter updates immediately.
So we use a flag for each nic to avoid events flooding, the event
is emitted once until the query command is executed. The flag
implementation could not introduce unexpected delay.
There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.
Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
"additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The drive-backup command is similar to the drive-mirror command, except
no guest data written after the command executes gets copied. Add a
sync mode argument which determines whether the entire disk is copied,
just allocated clusters, or only clusters being written to by the guest.
Currently only sync mode 'full' is supported - it copies the entire disk.
For read-only point-in-time snapshots we may only need sync mode 'none'
since the target can be a qcow2 file using the guest's disk as its
backing file (no need to copy the entire disk). Finally, sync mode
'top' is useful if we wish to preserve the backing chain.
Note that this patch just adds the sync mode argument to drive-backup.
It does not implement sync modes 'top' or 'none'. This patch is
necessary so we can add a drive-backup HMP command that behaves like the
existing drive-mirror HMP command and takes a sync mode.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
@drive-backup
Start a point-in-time copy of a block device to a new destination. The
status of ongoing drive-backup operations can be checked with
query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
The operation can be stopped before it has completed using the
block-job-cancel command.
@device: the name of the device which should be copied.
@target: the target of the new image. If the file exists, or if it
is a device, the existing file/device will be used as the new
destination. If it does not exist, a new file will be created.
@format: #optional the format of the new destination, default is to
probe if @mode is 'existing', else the format of the source
@mode: #optional whether and how QEMU should create a new image, default is
'absolute-paths'.
@speed: #optional the maximum speed, in bytes per second
@on-source-error: #optional the action to take on an error on the source,
default 'report'. 'stop' and 'enospc' can only be used
if the block device supports io-status (see BlockInfo).
@on-target-error: #optional the action to take on an error on the target,
default 'report' (no limitations, since this applies to
a different block device than @device).
Note that @on-source-error and @on-target-error only affect background I/O.
If an error occurs during a guest write request, the device's rerror/werror
actions will be used.
Returns: nothing on success
If @device is not a valid block device, DeviceNotFound
Since 1.6
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now image info will be retrieved as an embbed json object inside
BlockDeviceInfo, backing chain info and all related internal snapshot
info can be got in the enhanced recursive structure of ImageInfo. New
recursive member *backing-image is added to reflect the backing chain
status.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Igor Mammedov (21) and others
# Via Andreas Färber
* afaerber/qom-cpu: (29 commits)
Drop redundant resume_all_vcpus() from main()
cpus: Fix pausing TCG CPUs while in vCPU thread
target-i386: Replace cpuid_*features fields with a feature word array
target-i386: Break CPUID feature definition lines
target-i386/kvm.c: Code formatting changes
target-i386: Group together level, xlevel, xlevel2 fields
pc: Implement QEMUMachine::hot_add_cpu hook
QMP: Add cpu-add command
Add hot_add_cpu hook to QEMUMachine
target-i386: Move APIC to ICC bus
target-i386: Attach ICC bus to CPU on its creation
target-i386: Introduce ICC bus/device/bridge
cpu: Move cpu_write_elfXX_note() functions to CPUState
kvmvapic: Make dependency on sysbus.h explicit
target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZE
target-i386: Do not allow to set apic-id once CPU is realized
target-i386: Introduce apic-id CPU property
target-i386: Introduce feat2prop() for CPU properties
acpi_piix4: Add infrastructure to send CPU hot-plug GPE to guest
cpu: Add helper cpu_exists(), to check if CPU with specified id exists
...
similiar -> similar
recieve -> receive
transfered -> transferred
preperation -> preparation
Most changes are in comments, one modifies a parameter name in a function
prototype.
The spelling fixes were made using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Adds "cpu-add id=xxx" QMP command.
cpu-add's "id" argument is a CPU number in a range [0..max-cpus)
Example QMP command:
-> { "execute": "cpu-add", "arguments": { "id": 2 } }
<- { "return": {} }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Libvirt has no way to probe if an option or property is supported,
This patch introduces a new qmp command to query command line
option information. hmp command isn't added because it's not needed.
Signed-off-by: Amos Kong <akong@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Osier Yang <jyang@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This reverts commit 4d700430a2 as asked by
Luiz. The patch has been obsoleted by extending MachineInfo structure
by cpu-max field.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Peter Lieven (9) and others
# Via Juan Quintela
* quintela/migration.next: (22 commits)
Use qemu_put_buffer_async for guest memory pages
Add qemu_put_buffer_async
Use writev ops if available
Store the data to send also in iovec
Update bytes_xfer in qemu_put_byte
Add socket_writev_buffer function
Add QemuFileWritevBuffer QemuFileOps
migration: use XBZRLE only after bulk stage
migration: do not search dirty pages in bulk stage
migration: do not sent zero pages in bulk stage
migration: add an indicator for bulk state of ram migration
migration: search for zero instead of dup pages
bitops: unroll while loop in find_next_bit()
buffer_is_zero: use vector optimizations if possible
cutils: add a function to find non-zero content in a buffer
move vector definitions to qemu-common.h
savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definition
savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32
savevm: Add VMSTATE_FLOAT64 helpers
savevm: Add VMSTATE_UINTTL_EQUAL helper
...
during bulk stage of ram migration if a page is a
zero page do not send it at all.
the memory at the destination reads as zero anyway.
even if there is an madvise with QEMU_MADV_DONTNEED
at the target upon receipt of a zero page I have observed
that the target starts swapping if the memory is overcommitted.
it seems that the pages are dropped asynchronously.
this patch also updates QMP to return the number of
skipped pages in MigrationStats.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These commands return the maximum number of CPUs supported by the
currently running emulator instance, as defined in its QEMUMachine
struct.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New device, has never been released, so we can still improve things
without worrying about compatibility.
Naming is a mess. The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO". "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver. Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory. Therefore:
* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
"ringbuf" in the API.
* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.
* Rename device parameter from maxcapacity to size (simple words are
good for you).
* Clearly mark the parameter as optional in documentation.
* Fix error reporting so that chardev-add reports to current monitor,
not stderr.
* Replace cirmem in C identifiers by ringbuf.
* Rework documentation. Document the impact of our crappy UTF-8
handling on reading.
* QMP examples that even work.
I could split this up into multiple commits, but they'd change the
same documentation lines multiple times. Not worth it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The data returned has a well-defined size, which makes the size
returned along with it redundant at best. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Command memchar-write takes data and size parameter. Begs the
question what happens when data doesn't match size.
With format base64, qmp_memchar_write() copies the full data argument,
regardless of size argument.
With format utf8, qmp_memchar_write() copies size bytes from data,
happily reading beyond data. Copies crap from the heap or even
crashes.
Drop the size parameter, and always copy the full data argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, we are using 'tray_open' in QMP and 'tray-open' in
HMP. However, the QMP documentation was mistakenly using the
HMP version.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
