Making 'allow-oob' optional in SchemaInfoCommand permits omitting it
in the common case. Shrinks query-qmp-schema's output from 122.1KiB
to 118.6KiB for me.
Note that out-of-band execution is still experimental (you have to
configure the monitor with x-oob=on to use it).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180718090557.17248-1-armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
According to commit 047f7038f5, option --preconfig
[...] allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine
jumps into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and
additionally configure it using previous query results within one
QEMU instance (i.e. eliminate the need to start QEMU twice, 1st to
query board specific parameters and 2nd for actual VM start using
query results for additional parameters).
The implementation is a bit of a hack: it splices in an additional
main loop before machine creation, in special runstate preconfig. New
command exit-preconfig exits that main loop. QEMU continues
initializing, creates the machine, and runs the good old main loop.
The replacement of the main loop is transparent to monitors.
Sadly, some commands expect initialization to be complete. Running
them in --preconfig's main loop violates their preconditions. Since
we don't really know which commands are safe, we use a whitelist.
This drags the concept of run state into the QMP core.
The whitelist is done as a command flag in the QAPI schema (commit
d6fe3d02e9). Drags the concept of run state further into the QAPI
language.
The command flag is exposed in query-qmp-schema (also commit
d6fe3d02e9). This makes it ABI.
I consider the whole thing an offensively ugly hack, but sometimes an
ugly hack is the best we can do to solve a problem people have.
The need described by the commit message quote above is genuine. The
proper solution would be a main loop that permits complete
configuration via QMP. This is out of reach, thus the hack.
However, even though the need is genuine, it isn't urgent: libvirt is
not going to use this anytime soon. Baking a hack into ABI before it
has any users is a bad idea.
This commit reverts the parts of commit d6fe3d02e9 that affect ABI
via query-qmp-schema. The commit did the following:
(1) Add command flag 'allow-preconfig' to the QAPI schema language
(2) Pass it to code generators
(3) Have the commands.py code generator pass it to the command
registry (so commit 047f7038f5 can use it as whitelist)
(4) Add 'allow-preconfig' to SchemaInfoCommand (neglecting to update
qapi-code-gen.txt section "Client JSON Protocol introspection")
(5) Set 'allow-preconfig': true for commands qmp_capabilities,
query-commands, query-command-line-options, query-status
Revert exactly (4), plus a bit of documentation added to
qemu-tech.info in commit 047f7038f5.
Shrinks query-qmp-schema's output from 126.5KiB to 121.8KiB for me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit d626b6c1ae resolved]
The mechanism to find possible type tokens can sometimes be confused and go into an
infinite loop. This happens for example in QEMU for a line that looks like
uint## BITS ##_t S = _S, T = _T; \
uint## BITS ##_t as, at, xs, xt, xd; \
Because the token pasting operator does not have a space before _t, it does not
match $notPermitted. However, (?x) is turned on in the regular expression for
modifiers, and thus ##_t matches the empty string. As a result, annotate_values
goes in an infinite loop.
The solution is simply to remove token pasting operators from the string before
looking for modifiers. In the example above, the string uintBITS_t will be
evaluated as a candidate modifier. This is not optimal, but it works as long
as people do not write things like a##s##m, and it fits nicely into sub
possible.
For a similar reason, \# should be rejected always, even if it is not
at end of line or followed by whitespace.
The same patch was sent to the Linux kernel mailing list.
Reported-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This gives a more useful summary, sorted by descending % coverage,
after the tests have run. The final numbers will give an idea if our
coverage is getting better or worse.
To keep the width sane we need to post process the file that the old
gcovr tool generates. This is done with a mix of sed, awk and column
in the scripts/coverage-summary.sh script.
As quite a lot of lines don't get covered at all we filter out all the
0% lines. If the file doesn't appear it is not being exercised.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 208ecb3e1a. This was
causing problems by making DEF_TARGET_LIST pointless and having to
jump through hoops to build on mingw with a dully enabled config.
This includes a change to fix the per-guest TCG test probe which was
added after 208ecb3 and used TARGET_LIST.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
The documentation is generated only once, and doesn't know C
pre-conditions. Add 'If:' sections for top-level entities.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-13-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Types & visitors are coupled and must be handled together to avoid
temporary build regression.
Wrap generated types/visitor code with #if/#endif using the context
helpers. Derived from a patch by Marc-André.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-12-marcandre.lureau@redhat.com>
Wrap generated code with #if/#endif using an 'ifcontext' on
QAPIGenCSnippet objects.
This makes a conditional event's qapi_event_send_FOO() compile-time
conditional, but its enum QAPIEvent member remains unconditional for
now. A follow up patch "qapi-event: add 'if' condition to implicit
event enum" will improve this.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-11-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wrap generated code with #if/#endif using an 'ifcontext' on
QAPIGenCSnippet objects.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180703155648.11933-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Line breaks tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This commit adds 'ifcond' conditions to top-level QLit objects.
Future work will add them to object and enum type members, i.e. within
QLit objects.
Extend the QLit generator to_qlit() to accept (@obj, @cond) tuples in
addition to just @obj. The tuple causes the QLit generated for
objects for @obj with #if/#endif conditions for @cond.
See generated tests/test-qmp-introspect.c. Example diff after this
patch:
--- before 2018-01-08 11:55:24.757083654 +0100
+++ tests/test-qmp-introspect.c 2018-01-08 13:08:44.477641629 +0100
@@ -51,6 +51,8 @@
{ "name", QLIT_QSTR("EVENT_F"), },
{}
})),
+#if defined(TEST_IF_CMD)
+#if defined(TEST_IF_STRUCT)
QLIT_QDICT(((QLitDictEntry[]) {
{ "arg-type", QLIT_QSTR("5"), },
{ "meta-type", QLIT_QSTR("command"), },
@@ -58,12 +60,16 @@
{ "ret-type", QLIT_QSTR("0"), },
{}
})),
+#endif /* defined(TEST_IF_STRUCT) */
+#endif /* defined(TEST_IF_CMD) */
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-9-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The following patch is going to break list entries with #if/#endif, so
they should have the trailing ',' as suffix.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add helpers to wrap generated code with #if/#endif lines.
A later patch wants to use QAPIGen for generating C snippets rather
than full C files with copyright headers etc. Splice in class
QAPIGenCCode between QAPIGen and QAPIGenC.
Add a 'with' statement context manager that will be used to wrap
generator visitor methods. The manager will check if code was
generated before adding #if/#endif lines on QAPIGenCSnippet
objects. Used in the following patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180703155648.11933-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Skip preprocessor lines when adding indentation, since that would
likely result in invalid code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-6-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Modify the test visitor to check correct passing of values.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-5-marcandre.lureau@redhat.com>
[Accidental change to roms/seabios dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We commonly initialize attributes to None in .init(), then set their
real value in .check(). Accessing the attribute before .check()
yields None. If we're lucky, the code that accesses the attribute
prematurely chokes on None.
It won't for .ifcond, because None is a legitimate value.
Leave the ifcond attribute undefined until check().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Built-in objects remain unconditional. Explicitly defined objects use
the condition specified in the schema. Implicitly defined objects
inherit their condition from their users. For most of them, there is
exactly one user, so the condition to use is obvious. The exception
is wrapped types generated for simple union variants, which can be
shared by any number of simple unions. The tight condition would be
the disjunction of the conditions of these simple unions. For now,
use the wrapped type's condition instead. Much simpler and good
enough for now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Accept 'if' key in top-level elements, accepted as string or list of
string type. The following patches will modify the test visitor to
check the value is correctly saved, and generate #if/#endif code (as a
single #if/endif line or a series for a list).
Example of 'if' key:
{ 'struct': 'TestIfStruct', 'data': { 'foo': 'int' },
'if': 'defined(TEST_IF_STRUCT)' }
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-2-marcandre.lureau@redhat.com>
[Commit message and Documentation improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
-----BEGIN PGP SIGNATURE-----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=mbu2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/shorne/tags/pull-or-20180703' into staging
OpenRISC cleanups and Fixes for QEMU 3.0
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
# gpg: Signature made Tue 03 Jul 2018 14:44:10 BST
# gpg: using RSA key C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* remotes/shorne/tags/pull-or-20180703: (25 commits)
target/openrisc: Fix writes to interrupt mask register
target/openrisc: Fix delay slot exception flag to match spec
linux-user: Fix struct sigaltstack for openrisc
linux-user: Implement signals for openrisc
target/openrisc: Add support in scripts/qemu-binfmt-conf.sh
target/openrisc: Reorg tlb lookup
target/openrisc: Increase the TLB size
target/openrisc: Stub out handle_mmu_fault for softmmu
target/openrisc: Use identical sizes for ITLB and DTLB
target/openrisc: Fix cpu_mmu_index
target/openrisc: Fix tlb flushing in mtspr
target/openrisc: Reduce tlb to a single dimension
target/openrisc: Merge mmu_helper.c into mmu.c
target/openrisc: Remove indirect function calls for mmu
target/openrisc: Merge tlb allocation into CPUOpenRISCState
target/openrisc: Form the spr index from tcg
target/openrisc: Exit the TB after l.mtspr
target/openrisc: Split out is_user
target/openrisc: Link more translation blocks
target/openrisc: Fix singlestep_enabled
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
some distros provide a qemu-CPU-static binary beside the qemu-CPU one.
This change allows to use it by providing "--qemu-suffix -static" to the
script.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180627205317.10343-4-laurent@vivier.eu>
Since kernel commit 948b701a607f
(binfmt_misc: add persistent opened binary handler for containers)
kernel allows to load the interpreter at the configuration time.
In case of chroot, it allows to have the interpreter in the host root
filesystem and not to copy it to the chroot filesystem.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180627205317.10343-3-laurent@vivier.eu>
move credential value to its own variable to be able to manage
more flags
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180627205317.10343-2-laurent@vivier.eu>
Do not match the IEC binary prefix as camelcase typedefs.
This fixes:
ERROR: "foo * bar" should be "foo *bar"
#310: FILE: hw/ppc/ppc440_uc.c:564:
+ size = 8 * MiB * sh;
total: 1 errors, 0 warnings, 433 lines checked
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-5-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when using GCC with -Wformat-signedness:
migration/trace.h: In function ‘_nocheck__trace_dirty_bitmap_load_success’:
migration/trace.h:6368:24: error: format ‘%zd’ expects argument of type ‘signed size_t’, but argument 3 has type ‘long unsigned int’ [-Werror=format=]
qemu_log("%d@%zd.%06zd:dirty_bitmap_load_success " "" "\n",
~~^
%ld
migration/trace.h:6370:18:
(size_t)_now.tv_sec, (size_t)_now.tv_usec
~~~~~~~~~~~~~~~~~~~
migration/trace.h:6368:30: error: format ‘%zd’ expects argument of type ‘signed size_t’, but argument 4 has type ‘long unsigned int’ [-Werror=format=]
qemu_log("%d@%zd.%06zd:dirty_bitmap_load_success " "" "\n",
~~~~^
%06ld
migration/trace.h:6370:39:
(size_t)_now.tv_sec, (size_t)_now.tv_usec
~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The rest of the code assumes that idtoname is a (int -> str)
dictionary, so convert the data accordingly.
This is necessary to make the script work with Python 3 (where
reads from a binary file return 'bytes' objects, not 'str').
Fixes the following error:
$ python3 ./scripts/simpletrace.py trace-events-all trace-27445
b'object_class_dynamic_cast_assert' event is logged but is not \
declared in the trace events file, try using trace-events-all instead.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20180619194549.15584-1-ehabkost@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since commit 068cf7a44c, qmp-shell
is broken:
$ ./scripts/qmp/qmp-shell
Traceback (most recent call last):
File "./scripts/qmp/qmp-shell", line 70, in <module>
from . import qmp
ValueError: Attempted relative import in non-package
Relative imports don't work on scripts that are executed
directly, so revert the change on the scripts inside scripts/qmp.
Fixes: 068cf7a44c
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180621175451.7948-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit 1a9a507b2e "qapi-introspect: Hide type names" added local
variable @jsons to improve sorting, but also removed the sorting. It
was part of a big series that went to v8, and it made sense until v2
or so...
Commit 7d0f982bfb replaced @jsons by @qlits, preserving the
uselessness.
Get rid of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180620124742.16979-1-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Python 2 happily reads UTF-8 files in text mode, but Python 3 requires
either UTF-8 locale or an explicit encoding passed to open(). Commit
d4e5ec877c fixed this by setting the en_US.UTF-8 locale. Falls apart
when the locale isn't be available.
Matthias Maier and Arfrever Frehtes Taifersar Arahesis proposed to use
binary mode instead, with manual conversion from bytes to str. Works,
but opening with an explicit encoding is simpler, so do that.
Since Python 2's open() doesn't support the encoding parameter, we
need to suppress it with a version check.
Reported-by: Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
Reported-by: Matthias Maier <tamiko@43-1.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180618175958.29073-2-armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It often happens that just a few discriminator values imply extra data in
a flat union. Existing checks did not make possible to leave other values
uncovered. Such cases had to be worked around by either stating a dummy
(empty) type or introducing another (subset) discriminator enumeration.
Both options create redundant entities in qapi files for little profit.
With this patch it is not necessary anymore to add designated union
fields for every possible value of a discriminator enumeration.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-Id: <1529311206-76847-2-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The event generator produces an enum, and put it in the last visited
module. It fits better in the main module, since it's the set of all
visited events, from all modules.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180321115211.17937-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The set_console() method is intended to ease higher level use cases
that require a console device.
The amount of intelligence is limited on purpose, requiring either the
device type explicitly, or the existence of a machine (pattern)
definition.
Because of the console device type selection criteria (by machine
type), users should also be able to define that. It'll then be used
for both '-machine' and for the console device type selection.
Users of the set_console() method will certainly be interested in
accessing the console device, and for that a console_socket property
has been added.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20180530184156.15634-5-crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tests will often need to add extra arguments to QEMU command
line arguments.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180530184156.15634-3-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Replay data is not considered a possible attack vector; add a model that
does not use getc so that "tainted data" warnings are suppressed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180514141218.28438-1-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
-----BEGIN PGP SIGNATURE-----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=oWiH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging
Fixes in syscall numbers,
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
# gpg: Signature made Tue 12 Jun 2018 11:57:18 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
linux-user/sparc64: Add inotify_rm_watch and tee syscalls
linux-user/microblaze: Fix typo in accept4 syscall
linux-user/hppa: Fix typo in mknodat syscall
linux-user/alpha: Fix epoll syscalls
qemu-binfmt-conf.sh: ignore the OS/ABI field
linux-user: disable qemu-bridge-helper and socket_scm_helper build
linux-user: Use is_error() to avoid warnings and make the code clearer
linux-user: Export use is_error(), use it to avoid warnings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the binaries have a value of "UNIX - System V" for the OS/ABI.
But cc1 has a value of "UNIX - GNU", and if we don't update the binfmt
mask to ignore the OS/ABI field, gcc fails to execute it:
gcc: error trying to exec '/usr/lib/gcc/m68k-linux-gnu/7/cc1': execv: Exec format error
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180605194725.8585-1-laurent@vivier.eu>
Python 2.7 (the minimum Python version we require) provides
collections.OrderedDict on the standard library, so we don't need
to carry our own implementation.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608175252.25110-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Python 2.7 (the minimum Python version we require) already
provides the argparse module on the standard library.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608175252.25110-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
