As of the patch to flush qemu-img's "Formatting" message before the
error message, 059 has been broken for vmdk. Fix it.
Fixes: 4e2f441878
("qemu-img: Flush stdout before before potential stderr messages")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200811084150.326377-1-mreitz@redhat.com>
Reviewed-by: Eric blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The current qemu hppa emulation emulates a PA1.1 CPU, which can only execute
the 32-bit instruction set. For unknown 64-bit instructions, a instruction trap
is sent to the virtual CPU.
This behaviour is correct in the sense that we emulate what the PA1.1
specification says.
But when trying to boot older Linux installation images, e.g.
ftp://parisc.parisc-linux.org/debian-cd/debian-5.0/lenny-5.0.10-hppa-iso-cd/cdimage.debian.org/debian-5010-hppa-netinst.iso
one finds that qemu fails to boot those images.
The problem is, that in the Linux kernel (e.g. 2.6.26) of those old images
64-bit instructions were used by mistake in the fault handlers. The relevant
instructions (the ",*" indicates that it's a 64-bit instruction) I see are:
0: 09 3e 04 29 sub,* sp,r9,r9
0: 08 3d 06 3d add,* ret1,r1,ret1
0: 0a 09 02 61 or,* r9,r16,r1
0: 0a ba 00 3a andcm,* r26,r21,r26
0: 08 33 02 33 and,* r19,r1,r19
The interesting part is, that real physical 32-bit machines (like the 700/64
and B160L - which is the one we emulate) do boot those images and thus seem to
simply ignore the 64-bit flag on those instructions.
The patch below modifies the qemu instruction decoder to ignore the 64-bit flag
too - which is what real 32-bit hardware seems to do. With this modification
qemu now successfully boots those older images too.
I suggest to apply the patch below - even if it does not reflect what the SPEC
says. Instead it increases the compatibility to really existing hardware and
seem to not create problems if we add real PA2.0 support anytime later.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Emulate a power button switch, tell SeaBIOS the address via fw_cfg and
bind the power button to the qemu UI.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Change QEMU_FW_CFG_IO_BASE to shorter variant FW_CFG_IO_BASE and hand
over the actual port address in %r19 to SeaBIOS.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Devices on hppa occupy at least 4k starting at the HPA, so MEMORY_HPA+4k is
blocked (by Linux) for the memory module. I noticed this when testing the new
Linux kernel patch to let the fw_cfg entries show up in Linux under /proc.
The Linux kernel driver could not allocate the region for fw_cfg.
This new base address seems to not conflict.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Until now the TLB size was fixed at 256 entries. To allow operating
systems to utilize more TLB entries in the future, we need to tell
firmware how many TLB entries we actually support in the emulation.
Firmware then reports this to the operating system via the
PDC_CACHE_INFO call.
This patch simply does the preparation to allow more TLB entries.
Signed-off-by: Helge Deller <deller@gmx.de>
Both VirtioPCIBusClass and VirtioCcwBusClass are typedefs of
VirtioBusClass, but set .class_size in the TypeInfo anyway
to be safe if that changes in the future.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20200824122051.99432-1-cohuck@redhat.com>
This reverts commit c24a41bb53.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889937478.21294.4192291354416942986.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 7568b20555.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889936871.21294.1454526726636639780.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit dd08ef0318.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889936257.21294.1786224705357428082.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 6121c7fbfd.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889935648.21294.8095493980805969544.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 0c1538cb1a.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889935015.21294.1425332462852607813.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 2e26f4ab3b.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889934379.21294.15323080164340490855.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 247b18c593.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933756.21294.13999336052652073520.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 7b225762c8.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Also fix all the references of pkg_offset.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933119.21294.8112825730577505757.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We do have a QCryptoTLSCipherSuites struct. It must be used when
setting instance_size of the QOM type. Luckily this never caused
problems because the QCryptoTLSCipherSuites struct has only a
parent_obj field and nothing else.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200826171005.4055015-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Setting instance_size correctly at the base class will help us
avoid mistakes when declaring new subclasses.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200826171005.4055015-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move the typedef closer to the QOM type checking macros.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-54-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently we have a RXCPU typedef and a RXCPU type checking
macro, but OBJECT_DECLARE* would transform the RXCPU macro into a
function, and the function name would conflict with the typedef
name.
Rename the RXCPU* QOM type check macros to RX_CPU*, so we will
avoid the conflict and make the macro names consistent with the
TYPE_RX_CPU constant name.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-53-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's a typo in the type name of AARCH64_CPU_GET_CLASS. This
was never detected because the macro is not used by any code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-52-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename the macro to be consistent with RDMA_PROVIDER and
RDMA_PROVIDER_GET_CLASS.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-48-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some QOM macros were using a X86_IOMMU_DEVICE prefix, and others
were using a X86_IOMMU prefix. Rename all of them to use the
same X86_IOMMU_DEVICE prefix.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-47-ehabkost@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename the MOS6522_DEVICE_CLASS and MOS6522_DEVICE_GET_CLASS
macros to be consistent with the TYPE_MOS6522 and MOS6522 macros.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-46-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename it to IMX_CCM_GET_CLASS to be consistent with the existing
IMX_CCM and IXM_CCM_CLASS macro.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-45-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since nvme_map_prp always operate on the request-scoped qsg/iovs, just
pass a single pointer to the NvmeRequest instead of two for each of the
qsg and iov.
Suggested-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Since clean up of the request qsg/iov is now always done post-use, there
is no need to use a stack-allocated qsg/iov in nvme_dma_prp.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Always destroy the request qsg/iov at the end of request use.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Instead of passing around the NvmeNamespace and the NvmeCmd, add them as
members in the NvmeRequest structure.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
The NVM Express specification generally uses 'zeroes' and not 'zeros',
so let us align with it.
Cc: Fam Zheng <fam@euphon.net>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Add 'mdts' device parameter to control the Maximum Data Transfer Size of
the controller and check that it is respected.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Hoist bounds checking into its own function and check for wrap-around.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Before this patch the device already supported PRP lists in the CMB, but
it did not check for the validity of it nor announced the support in the
Identify Controller data structure LISTS field.
If some of the PRPs in a PRP list are in the CMB, then ALL entries must
be there. This patch makes sure that requirement is verified as well as
properly announcing support for PRP lists in the CMB.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Introduce the nvme_map helper to remove some noise in the main nvme_rw
function.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Refactor the nvme_dma_{read,write}_prp functions into a common function
taking a DMADirection parameter.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Make sure the request iov is destroyed before reuse; fixing a memory
leak.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Remove the has_sg member from NvmeRequest since it's redundant.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
The QSG isn't always initialized, so accounting could be wrong. Issue a
call to blk_acct_start instead with the size taken from the QSG or IOV
depending on the kind of I/O.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Add nvme_map_addr, nvme_map_addr_cmb and nvme_addr_to_cmb helpers and
use them in nvme_map_prp.
This fixes a bug where in the case of a CMB transfer, the device would
map to the buffer with a wrong length.
Fixes: b2b2b67a00 ("nvme: Add support for Read Data and Write Data in CMBs.")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com>
This is preparatory to subsequent patches that change how QSGs/IOVs are
handled. It is important that the qsg and iov members of the NvmeRequest
are initially zeroed.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
The SUBNQN field is mandatory in NVM Express 1.3.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-18-its@irrelevant.dk>
Support returning Command Sequence Error if Set Features on Number of
Queues is called after queues have been created.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200706061303.246057-17-its@irrelevant.dk>
Reject the nsid broadcast value (0xffffffff) and 0xfffffffe in the
Active Namespace ID list.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-16-its@irrelevant.dk>
