In preparation for a full implementation, move i.MX watchdog driver
from hw/misc to hw/watchdog. While at it, add the watchdog files
to MAINTAINERS.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GEN_NEON_INTEGER_OP macro is no longer used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Our code to identify syscall numbers has some issues:
* for Thumb mode, we never need the immediate value from the insn,
but we always read it anyway
* bad immediate values in the svc insn should cause a SIGILL, but we
were abort()ing instead (via "goto error")
We can fix both these things by refactoring the code that identifies
the syscall number to more closely follow the kernel COMPAT_OABI code:
* for Thumb it is always r7
* for Arm, if the immediate value is 0, then this is an EABI call
with the syscall number in r7
* otherwise, we XOR the immediate value with 0x900000
(ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel),
which converts valid syscall immediates into the desired value,
and puts all invalid immediates in the range 0x100000 or above
* then we can just let the existing "value too large, deliver
SIGILL" case handle invalid numbers, and drop the 'goto error'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200420212206.12776-5-peter.maydell@linaro.org
The kernel has different handling for syscalls with invalid
numbers that are in the "arm-specific" range 0x9f0000 and up:
* 0x9f0000..0x9f07ff return -ENOSYS if not implemented
* other out of range syscalls cause a SIGILL
(see the kernel's arch/arm/kernel/traps.c:arm_syscall())
Implement this distinction. (Note that our code doesn't look
quite like the kernel's, because we have removed the
0x900000 prefix by this point, whereas the kernel retains
it in arm_syscall().)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200420212206.12776-4-peter.maydell@linaro.org
We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a
NOP for QEMU). This is the wrong syscall number, because in the
svc-immediate OABI syscall numbers are all offset by the
ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002.
(This is handled further down in the code with the other Arm-specific
syscalls like NR_breakpoint.)
When this code was initially added in commit 6f1f31c069 in
2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2)
so the value in the comparison took account of the extra 0x900000
offset. In commit fbb4a2e371 in 2008, the ARM_SYSCALL_BASE
was removed from the definition of ARM_NR_cacheflush and handling
for this group of syscalls was added below the point where we subtract
ARM_SYSCALL_BASE from the SVC immediate value. However that commit
forgot to remove the now-obsolete earlier handling code.
Remove the spurious ARM_NR_cacheflush condition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200420212206.12776-3-peter.maydell@linaro.org
In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly
to EXCP_SWI, which means that if the guest executes a BKPT insn then
QEMU will perform a syscall for it (which syscall depends on what
value happens to be in r7...). The correct behaviour is that the
guest process should take a SIGTRAP.
This code has been like this (more or less) since commit
06c949e62a in 2006 which added BKPT in the first place. This is
probably because at the time the same code path was used to handle
both Linux syscalls and semihosting calls, and (on M profile) BKPT
with a suitable magic number is used for semihosting calls. But
these days we've moved handling of semihosting out to an entirely
different codepath, so we can fix this bug by simply removing this
handling of EXCP_BKPT and instead making it deliver a SIGTRAP like
EXCP_DEBUG (as we do already on aarch64).
Reported-by: <omerg681@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200420212206.12776-2-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1873898
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a minimal documentation of the Musca boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-6-peter.maydell@linaro.org
Add basic documentation of the MPS2 board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-5-peter.maydell@linaro.org
Provide a minimal documentation of the Versatile Express boards
(vexpress-a9, vexpress-a15).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-4-peter.maydell@linaro.org
Sort the board index into alphabetical order. (Note that we need to
sort alphabetically by the title text of each file, which isn't the
same ordering as sorting by the filename.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-3-peter.maydell@linaro.org
Add 'Arm' to the Integrator/CP document title, for consistency with
the titling of the other documentation of Arm devboard models
(versatile, realview).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-2-peter.maydell@linaro.org
The canon-a1100 machine can be used with the Barebox firmware. The
QEMU Advent Calendar 2018 features a pre-compiled image which we
can use for testing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200514190422.23645-1-f4bug@amsat.org
Message-Id: <20200129090420.13954-1-thuth@redhat.com>
[PMD: Rebased MAINTAINERS]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add cases to test tight and non-tight for abstract address type
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
unix_listen/connect_saddr now support abstract address types
two aditional BOOL switches are introduced:
tight: whether to set @addrlen to the minimal string length,
or the maximum sun_path length. default is TRUE
abstract: whether we use abstract address. default is FALSE
cli example:
-monitor unix:/tmp/unix.socket,abstract,tight=off
OR
-chardev socket,path=/tmp/unix.socket,id=unix1,abstract,tight=on
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Include actions for --add, --remove, --clear, --enable, --disable, and
--merge (note that --clear is a bit of fluff, because the same can be
accomplished by removing a bitmap and then adding a new one in its
place, but it matches what QMP commands exist). Listing is omitted,
because it does not require a bitmap name and because it was already
possible with 'qemu-img info'. A single command line can play one or
more bitmap commands in sequence on the same bitmap name (although all
added bitmaps share the same granularity, and and all merged bitmaps
come from the same source file). Merge defaults to other bitmaps in
the primary image, but can also be told to merge bitmaps from a
distinct image.
While this supports --image-opts for the file being modified, I did
not think it worth the extra complexity to support that for the source
file in a cross-file merges. Likewise, I chose to have --merge only
take a single source rather than following the QMP support for
multiple merges in one go (although you can still use more than one
--merge in the command line); in part because qemu-img is offline and
therefore atomicity is not an issue.
Upcoming patches will add iotest coverage of these commands while
also testing other features.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This includes *_is_any_nan, *_is_neg, *_is_inf, etc.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the floatx80 compare specializations with inline functions
that call the standard floatx80_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the float128 compare specializations with inline functions
that call the standard float128_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the float64 compare specializations with inline functions
that call the standard float64_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the float32 compare specializations with inline functions
that call the standard float32_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give the previously unnamed enum a typedef name. Use it in the
prototypes of compare functions. Use it to hold the results
of the compare functions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give the previously unnamed enum a typedef name. Use the packed
attribute so that we do not affect the layout of the float_status
struct. Use it in the prototypes of relevant functions.
Adjust switch statements as necessary to avoid compiler warnings.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Slightly tidies the usage within softfloat.c and the
representation in float_status.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have had this on the to-do list for quite some time.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The existing f{32,64}_addsub_post test, which checks for zero
inputs, is identical to f{32,64}_mul_fast_test. Which means
we can eliminate the fast_test/fast_op hooks in favor of
reusing the same post hook.
This means we have one fewer test along the fast path for multiply.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Upcoming patches want to add some basic bitmap manipulation abilities
to qemu-img. But blockdev.o is too heavyweight to link into qemu-img
(among other things, it would drag in block jobs and transaction
support - qemu-img does offline manipulation, where atomicity is less
important because there are no concurrent modifications to compete
with), so it's time to split off the bare bones of what we will need
into a new file block/monitor/bitmap-qmp-cmds.o.
This is sufficient to expose 6 QMP commands for use by qemu-img (add,
remove, clear, enable, disable, merge), as well as move the three
helper functions touched in the previous patch. Regarding
MAINTAINERS, the new file is automatically part of block core, but
also makes sense as related to other dirty bitmap files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-6-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The next patch will split blockdev.c, which will require accessing
some previously-static functions from more than one .c file. But part
of promoting a function to public is picking a naming scheme that does
not reek of exposing too many internals (two of the three functions
were named starting with 'do_'). To make future code motion easier,
perform the function rename and non-static promotion into its own
patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Upcoming patches will enhance bitmap support in qemu-img, but in doing
so, it turns out to be nice to suppress output when persistent bitmaps
make no sense (such as on a qcow2 v2 image). Add a hook to make this
easier to query.
This patch adds a new callback .bdrv_supports_persistent_dirty_bitmap,
rather than trying to shoehorn the answer in via existing callbacks.
In particular, while it might have been possible to overload
.bdrv_co_can_store_new_dirty_bitmap to special-case a NULL input to
answer whether any persistent bitmaps are supported, that is at odds
with whether a particular bitmap can be stored (for example, even on
an image that supports persistent bitmaps but has currently filled up
the maximum number of bitmaps, attempts to store another one should
fail); and the new functionality doesn't require coroutine safety.
Similarly, we could have added one more piece of information to
.bdrv_get_info, but then again, most callers to that function tend to
already discard extraneous information, and making it a catch-all
rather than a series of dedicated scalar queries hasn't really
simplified life.
In the future, when we improve the ability to look up bitmaps through
a filter, we will probably also want to teach the block layer to
automatically let filters pass this request on through.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513011648.166876-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Missed in commit e13c59fa.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We already list the subcommand summaries alphabetically, we should do
the same for the documentation related to subcommand-specific
parameters.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Dirty bitmaps are important to incremental backups, including exposure
over NBD where I'm already maintainer. Also, I'm aware that lately I
have been doing as much code/review on bitmaps as John Snow who is
trying to scale back in order to focus elsewhere; and many of the
recent patches have come from Vladimir, who is also interested in
taking on maintainer duties, but would like to start with
co-maintainership. Therefore, it's time to revamp the ownership of
this category, as agreed between the three of us.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200514180003.325406-1-eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
- Introduce real BdrvChildRole
- blk/bdrv_make_empty() functions instead of calling callbacks directly
- mirror: Make sure that source and target size match
- block-copy: Fix uninitialized variable
- block/replication: Avoid cancelling the job twice
- ahci: Log lost IRQs
- iotests: Run pylint and mypy in a testcase
- iotests: log messages from notrun()
-----BEGIN PGP SIGNATURE-----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=JSKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Introduce real BdrvChildRole
- blk/bdrv_make_empty() functions instead of calling callbacks directly
- mirror: Make sure that source and target size match
- block-copy: Fix uninitialized variable
- block/replication: Avoid cancelling the job twice
- ahci: Log lost IRQs
- iotests: Run pylint and mypy in a testcase
- iotests: log messages from notrun()
# gpg: Signature made Mon 18 May 2020 18:05:32 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (52 commits)
hw: Use QEMU_IS_ALIGNED() on parallel flash block size
iotests/030: Reduce run time by unthrottling job earlier
hw/ide/ahci: Log lost IRQs
iotests: log messages from notrun()
block/block-copy: Simplify block_copy_do_copy()
block/block-copy: Fix uninitialized variable in block_copy_task_entry
block: Drop @child_class from bdrv_child_perm()
block: Pass BdrvChildRole in remaining cases
block: Drop child_file
block: Drop bdrv_format_default_perms()
block: Make bdrv_filter_default_perms() static
block: Use bdrv_default_perms()
tests: Use child_of_bds instead of child_file
block: Use child_of_bds in remaining places
block: Make filter drivers use child_of_bds
block: Make format drivers use child_of_bds
block: Drop child_backing
block: Make backing files child_of_bds children
block: Drop child_format
block: Switch child_format users to child_of_bds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Based on a mail on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-05/msg02909.html
and some internet research the GTK3 versions on supported
platforms are:
RHEL-7.4: 3.22.10
RHEL-7.5: 3.22.26
Debian (Stretch): 3.22.11
Debian (Buster): 3.24.5
OpenBSD (Ports): 3.22.30
FreeBSD (Ports): 3.22.29
OpenSUSE Leap 15: 3.22.30
SLE12-SP2: Unknown
SLE15: 3.22.30
Ubuntu (Bionic): 3.22.30
Ubuntu (Focal): 3.24.18
macOS (Homebrew): 3.22.30
This justifies increasing the minimum required GTK version in
QEMU to 3.22.0.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-11-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since GTK 3.22 the function gdk_event_get_scancode() is
available. On Windows this function returns keyboard scancodes
and some extended flags. These raw keyboard scancodes are much
better suited for this use case than the half-cooked win32
virtual-key codes because scancodes report the key position on
the keyboard and the positions are independent of national
language settings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-10-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without keyboard grab Windows currently handles the two win keys
and the key events are also sent to the guest. This is undesir-
able. Only one program should handle key events. This patch ap-
plies commit c68f74b02e "win32: do not handle win keys when the
keyboard is not grabbed" from project spice-gtk to ui/gtk.c to
fix this problem.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-9-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU with SDL 1.2 display used to enable keyboard and mouse grab-
bing when started in full screen. The SDL 2.0 code tries to do
the same but fails to enable grabbing because sdl_grab_start(0)
returns early. To do it's work the sdl_grab_start() function
needs a pointer to a sdl2_console structure.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-7-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wire up the keyboard hooking code on Windows to fix the AltGr
key and improve keyboard grabbing.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-6-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the removal of GTK2 code in commit 89d85cde75 the code
around ignore_keys is unused. See commit 1a01716a30 "gtk: Avoid
accel key leakage into guest on console switch" why it was only
needed for GTK2.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This code was last used before commit 2ec78706d1 "ui: convert
GTK and SDL1 frontends to keycodemapdb".
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no way to grab the Ctrl-Alt-Del key combination on
Windows. This key combination will leave all three keys in a
stuck condition. This patch uses the grab-broken-event to
release the keys.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wire up the keyboard hooking code on Windows to fix the AltGr
key and improve keyboard grabbing.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Import win32 keyboard hooking code from project spice-gtk. This
patch removes the extra left control key up/down input events
inserted by Windows for the right alt key up/down input events
with international keyboard layouts. Additionally there's some
code to grab the keyboard.
The next patches will use this code.
Only Windows needs this.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
