Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
Drop unnecessary inclusions from headers. Downgrade a few more to
exec/hwaddr.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
This function is only needed when Q35 is in use. Moving it to
the same file that uses it lets you disable the entire USB
subsystem in x86_64-softmmu.mak; of course doing that will
cause -usb to break horribly, but one thing at a time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1545064358-4601-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The option have been marked as deprecated since QEMU 2.10, and so far
nobody complained that the host, serial, disk and net options are urgently
required anymore. So let's now get rid at least of this legacy pile, to
simplify the usb code quite a bit.
This patch removes the usbdevices host, serial, disk and net. These devices
use their own complicated parameter parsing mechanisms, so they are just
ugly to maintain, without real benefit for the users (the users can use the
corresponding "-device" parameters instead which have the same complexity
as the "-usbdevice" devices here).
Note that the other rather simple -usbdevice options (mouse, tablet, etc.)
are not removed yet (the code is really simple here, so it does not hurt
much to keep it), as well as the two devices "braille" and "bt" which are
easier to use with -usbdevice than with -device.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com
[kraxel] delete some usb_host_device_open() leftovers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's easy to use device_add and device_del as replacement instead.
The usb_add and usb_del commands are deprecated since QEMU 2.10,
and nobody complained that they are still needed, so let's get rid
of them now to make the HMP interface a little bit less overloaded.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Curiously, unrealize() is not being used, but it seems more
appropriate than handle_destroy() together with realize(). It is more
ubiquitous destroy name in qemu code base and may throw errors.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170221141451.28305-25-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Windows 10 reportedly sends these, so accept them in case
the device in question is a superspeed (usb3) device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485870727-21956-2-git-send-email-kraxel@redhat.com
When passing through an USB storage device to a pseries guest, it
is currently not possible to automatically boot from the device
if the "bootindex" property has been specified, too (e.g. when using
"-device nec-usb-xhci -device usb-host,hostbus=1,hostaddr=2,bootindex=0"
at the command line). The problem is that QEMU builds a device tree path
like "/pci@800000020000000/usb@0/usb-host@1" and passes it to SLOF
in the /chosen/qemu,boot-list property. SLOF, however, probes the
USB device, recognizes that it is a storage device and thus changes
its name to "storage", and additionally adds a child node for the
SCSI LUN, so the correct boot path in SLOF is something like
"/pci@800000020000000/usb@0/storage@1/disk@101000000000000" instead.
So when we detect an USB mass storage device with SCSI interface,
we've got to adjust the firmware boot-device path properly that
SLOF can automatically boot from the device.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1354177
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
USB devices in attached state are visible to the guest. This patch adds
a QOM property for this. Write access is opt-in per device. Some
devices manage attached state automatically (usb-host, usb-serial,
usb-redir), so we can't enable write access universally but have to do
it on a case by case base. So far, no device opts in.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1465984019-28963-4-git-send-email-kraxel@redhat.com
[ minor codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu-common.h should only be included by .c files. Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."
qemu/iov.h includes qemu-common.h for QEMUIOVector stuff. Move all
that to qemu/iov.h and drop the ill-advised include. Include
qemu/iov.h where the QEMUIOVector stuff is now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Delete set_usb_string(), usb_ep_get_ifnum(), usb_ep_get_max_packet_size()
usb_ep_get_max_streams() and usb_ep_set_pipeline() since they are
not used anymore.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This loses the messages explaining the error printed with
error_printf_unless_qmp(). The next commit will make up for the loss.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In this way, we can check speed directly, don't need
call usb_device_attach(), which has other conditions,
such as checking the chardev is open.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All usb-bus devices are realized by realize(),
remove init callback function from USBDeviceClass struct.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add "realize/unrealize" in USBDeviceClass, which has errp
as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.
Note: this patch still keep "init" in USBDeviceClass, and
call kclass->init in usb_device_realize(), avoid breaking
git bisect. After realize all usb devices, will be removed.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
add global variables releasing logic when the usb buses
were removed or hot-unpluged.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fixes a warning from smatch (static code analyser).
Fix also the comment with the renamed source file name.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
hw/timer/tusb6010.c | 3 ---
include/hw/usb.h | 7 ++++++-
2 files changed, 6 insertions(+), 4 deletions(-)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We can pick the usb port speed in generic code, by looking at the port
and device speed masks and looking for the fastest match. So add a
function to do exactly that, and drop the speed setting code from
usb_desc_attach as it isn't needed any more.
This way we can set the device speed before calling port->ops->attach,
which fixes some xhci hotplug issues.
https://bugzilla.redhat.com/show_bug.cgi?id=1046873
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for special usb descriptors used by microsoft
windows. They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.
As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add defines for vendor specific usb control requests.
Group defines by Device / Interface / Endpoint while
being at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To be passed to qbus_create_inplace().
Use DEVICE() cast to avoid a direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This patch adds a serial property for all usb devices, which can be
used to set the serial number of a usb device (as listed by lsusb -v)
to a specific value. Applies to emulated devices only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
# By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/hw-dirs: (35 commits)
hw: move private headers to hw/ subdirectories.
MAINTAINERS: update for source code movement
hw: move last file to hw/arm/
hw: move hw/kvm/ to hw/i386/kvm
hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
hw: move other devices to hw/misc/, configure with default-configs/
hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/
hw: move GPIO interfaces to hw/gpio/, configure with default-configs/
hw: move interrupt controllers to hw/intc/, configure with default-configs/
hw: move DMA controllers to hw/dma/, configure with default-configs/
hw: move VFIO and ivshmem to hw/misc/
hw: move PCI bridges to hw/pci-* or hw/ARCH
hw: move SD/MMC devices to hw/sd/, configure with default-configs/
hw: move timer devices to hw/timer/, configure with default-configs/
hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
hw: move char devices to hw/char/, configure via default-configs/
hw: move more files to hw/xen/
hw: move SCSI controllers to hw/scsi/, configure via default-configs/
hw: move SSI controllers to hw/ssi/, configure via default-configs/
hw: move I2C controllers to hw/i2c/, configure via default-configs/
...
Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
