We no longer generate texinfo from the hxtool input files,
so delete all the STEXI/ETEXI blocks.
This commit was created using the following Perl one-liner:
perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the rST versions of the documentation fragments. Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.
Note that most of the SRST fragments are 2-space indented so that the
'info foo' documentation entries appear as a sublist under the 'info'
entry in the top level list.
Again, all we need to do to put the documentation in the Sphinx manual
is a one-line hxtool-doc invocation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-22-peter.maydell@linaro.org
This adds 'info mem' command for RISC-V, to show virtual memory
mappings that aids debugging.
Rather than showing every valid PTE, the command compacts the
output by merging all contiguous physical address mappings into
one block and only shows the merged block mapping details.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Allow interrogating device internals through HMP interface.
The exposed indicators can be used for troubleshooting by developers or
sysadmin.
There is no need to expose these attributes to a management system (e.x.
libvirt) because (1) most of them are not "device-management' related
info and (2) there is no guarantee the interface is stable.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1552300155-25216-6-git-send-email-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Add #if defined(CONFIG_VNC) in generated code, and adjust the
qmp/hmp code accordingly.
query-qmp-schema no longer reports the command/events etc as
available when disabled at compile.
Commands made conditional:
* query-vnc, query-vnc-servers, change-vnc-password
Before the patch, the commands for !CONFIG_VNC are stubs that fail
like this:
{"error": {"class": "GenericError",
"desc": "The feature 'vnc' is not enabled"}}
Afterwards, they fail like this:
{"error": {"class": "CommandNotFound",
"desc": "The command FOO has not been found"}}
I call that an improvement, because it lets clients distinguish
between command unavailable (class CommandNotFound) and command failed
(class GenericError).
Events made conditional:
* VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED
HMP change:
* info vnc
Will return "unknown command: 'info vnc'" when VNC is compiled
out (same as error for spice when --disable-spice)
Occurrences of VNC (case insensitive) in the schema that aren't
covered by this change:
* add_client
Command has other uses, including "socket bases character devices".
These are unconditional as far as I can tell.
* set_password, expire_password
In theory, these commands could be used for managing any service's
password. In practice, they're used for VNC and SPICE services.
They're documented for "remote display session" / "remote display
server".
The service is selected by argument @protocol. The code special-cases
protocol-specific argument checking, then calls a protocol-specific
function to do the work. If it fails, the command fails with "Could
not set password". It does when the service isn't compiled in (it's a
stub then).
We could make these commands conditional on the conjunction of all
services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)],
but I doubt it's worthwhile.
* change
Command has other uses, namely changing media.
This patch inlines a stub; no functional change.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Something that commit 254316fa1f ("intc: make HMP 'info irq' and 'info
pic' commands available on all targets", 2016-10-04) forgot to touch up.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds owners/parents (which are the same, just occasionally
owner==NULL) printing for memory regions; a new '-o' flag
enabled new output.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180604032511.6980-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow a bunch of the info commands to be used in preconfig.
version, chardev, name, uuid,memdev, iothreads
Were enabled in QMP in the previous patch from Igor
status, hotpluggable_cpus
Was enabled in the original allow-preconfig series
history
is HMP specific
qom-tree
Don't have a QMP equivalent
Also enable the qom commands qom-list and qom-set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180620153947.30834-6-dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dropped info numa as per Igor's 2018-06-21 review
The command can be used to show the SEV information when memory
encryption is enabled on AMD platform.
Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-doc has the monitor commands in the "Function Index". The "info
FOO" are listed as "FOO" there. List them as "info FOO" instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A command's STEXI..ETEXI stanza follows the command's initializer.
Two commands got them backwards. Correct that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Screwed up in commit da76ee7.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This adds a new "-d" switch to "info mtree" to print dispatch tree
internals.
This changes the way "-f" is handled - it prints now flat views and
associated address spaces.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-15-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add 'info memory_size_summary' command which is a sibling
of QMP command query-memory-size-summary. It provides the
following memory information in bytes:
* base-memory - size of "base" memory specified with command line option -m.
* plugged-memory - amount of memory that was hot-plugged.
If target does not have CONFIG_MEM_HOTPLUG enabled, no
value is reported.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up comments from Igor's review
Add [apic-id] support for hmp command "info lapic", which is
useful when debugging ipi and so on. Current behavior is not
changed when the parameter isn't specified.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Yun Liu <liu.yunh@zte.com.cn>
Message-Id: <1501049917-4701-3-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The info registers command in the qemu monitor is used to dump register
values.
Currently this command uses the monitor cpu (which can be set by the
user) as the cpu for whose registers will be dumped. Sometimes it is
useful to see the registers for all cpus and currently this requires
setting the monitor cpu and the re-running the command for each cpu
in the system. I would be nice if there was an easier way to do this.
Add the "-a" option to the info registers command to dump the register
values for all cpus.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20170608054116.17203-1-sjitindarsingh@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
To dump information about ramblocks. It looks like:
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 2 MiB 0x0000000000000000 0x0000000080000000 0x0000000080000000
vga.vram 4 KiB 0x0000000080060000 0x0000000001000000 0x0000000001000000
/rom@etc/acpi/tables 4 KiB 0x00000000810b0000 0x0000000000020000 0x0000000000200000
pc.bios 4 KiB 0x0000000080000000 0x0000000000040000 0x0000000000040000
0000:00:03.0/e1000.rom 4 KiB 0x0000000081070000 0x0000000000040000 0x0000000000040000
pc.rom 4 KiB 0x0000000080040000 0x0000000000020000 0x0000000000020000
0000:00:02.0/vga.rom 4 KiB 0x0000000081060000 0x0000000000010000 0x0000000000010000
/rom@etc/table-loader 4 KiB 0x00000000812b0000 0x0000000000001000 0x0000000000001000
/rom@etc/acpi/rsdp 4 KiB 0x00000000812b1000 0x0000000000001000 0x0000000000001000
Ramblock is something hidden internally in QEMU implementation, and this
command should only be used by mostly QEMU developers on RAM stuff. It
is not a command suitable for QMP interface. So only HMP interface is
provided for it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Adding one more option "-f" for "info mtree" to dump the flat views of
all the address spaces.
This will be useful to debug the memory rendering logic, also it'll be
much easier with it to know what memory region is handling what address
range.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is no longer necessary now that we aren't using middle mode
anymore.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Homogenizes the command capabilities with QMP.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the HMP equivalent for QMP query-hotpluggable-cpus.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Fixed problem with printf formats on 32-bit host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will calculate percentage of finished work from completed and
total.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1455772616-8668-11-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dropped by commit da76ee76f78b9705e2a91e3c964aef28fecededb's
transition to hmp-commands-info.hx.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1442589509-10806-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.
From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For moving target- and device-specific code from monitor.c,
to beginning we move info_cmds content to hmp-commands-info.hx
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
