Since the prctl constants are supposed to be generic, supply
any that are not provided by the host.
Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE,
PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL,
PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do
not support these options rather than pass them on to the host.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_SIGSTKSZ is not used, we should remove it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-4-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_MINSIGSTKSZ has been defined in generic/signal.h
or target_signal.h, We don't need to define it again.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
cpu_loop() never exits, so mark it with QEMU_NORETURN.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20211106113916.544587-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux Hexagon port doesn't define a specific 'struct stat'
but uses the generic one (see Linux commit 6103ec56c65c [*]
"asm-generic: add generic ABI headers" which predates the
introduction of the Hexagon port).
Remove the target specific target_stat (which in fact is the
target_stat64 structure but uses incorrect target_long and
ABI unsafe long long types) and use the generic target_stat64
instead.
[*] https://github.com/torvalds/linux/commit/6103ec56c65c3#diff-5f59b07b38273b7d6a74193bc81a8cd18928c688276eae20cb10c569de3253ee
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20211116210919.2823206-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu-binfmt-conf.sh should use "-F" as short option for "--qemu-suffix".
Fix the getopt call to make this work.
Fixes: 7155be7cda ("qemu-binfmt-conf.sh: allow to provide a suffix to the interpreter name")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211129135100.3934-1-mwilck@suse.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Brown bag time: offset 0 from esp is the return address,
offset 4 is the first argument.
Fixes: d7478d4229 ("common-user: Fix tail calls to safe_syscall_set_errno_tail")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix for folding of vector add/sub.
Fix build on loongarch64 with gcc 8.
Remove decl for qemu_run_machine_init_done_notifiers.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmHU6McdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9eaggAlghC84C3D2qAQfL/
KWPHVDzVVcaxQlAcVL2VQevJt8zANq82zlg+p6oNEoNv7uV9TRenbM+6yE0ezSld
njc265n6WpBua52lubVmfBoVOp8PdARGRLfy4xhyzuDKUspzK7pxhxF/uSaKf2Qr
VbWk684Q9DPDMORE4FYruI+hXuM9IX3g3qKLwcxm8/uHEkseU6goS5n0L7XA3YLN
IfntWcHSvL8suZoLArnRYbliJopBwVbVNzsf0sDEmzKQdGB6HDbhksQBqVW3rRXY
xb70ZuarLVr82rp3Avp38cr02wqemN9qx3ebJyPAry2TRG5DEKHHZrklzo5OFthH
XVmKog==
=qTNz
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20220104' of https://gitlab.com/rth7680/qemu into staging
Fix for safe_syscall_base.
Fix for folding of vector add/sub.
Fix build on loongarch64 with gcc 8.
Remove decl for qemu_run_machine_init_done_notifiers.
# gpg: Signature made Tue 04 Jan 2022 04:39:35 PM PST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20220104' of https://gitlab.com/rth7680/qemu:
common-user: Fix tail calls to safe_syscall_set_errno_tail
sysemu: Cleanup qemu_run_machine_init_done_notifiers()
linux-user: Fix trivial build error on loongarch64 hosts
tcg/optimize: Fix folding of vector ops
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For the ABIs in which the syscall return register is not
also the first function argument register, move the errno
value into the correct place.
Fixes: a3310c0397 ("linux-user: Move syscall error detection into safe_syscall_base")
Reported-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220104190454.542225-1-richard.henderson@linaro.org>
Remove qemu_run_machine_init_done_notifiers() since no implementation
and user.
Fixes: f66dc8737c ("vl: move all generic initialization out of vl.c")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220104024136.1433545-1-xiaoyao.li@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When building using GCC 8.3.0 on loongarch64 (Loongnix) we get:
In file included from ../linux-user/signal.c:33:
../linux-user/host/loongarch64/host-signal.h: In function ‘host_signal_write’:
../linux-user/host/loongarch64/host-signal.h:57:9: error: a label can only be part of a statement and a declaration is not a statement
uint32_t sel = (insn >> 15) & 0b11111111111;
^~~~~~~~
We don't use the 'sel' variable more than once, so drop it.
Meson output for the record:
Host machine cpu family: loongarch64
Host machine cpu: loongarch64
C compiler for the host machine: cc (gcc 8.3.0 "cc (Loongnix 8.3.0-6.lnd.vec.27) 8.3.0")
C linker for the host machine: cc ld.bfd 2.31.1-system
Fixes: ad812c3bd6 ("linux-user: Implement CPU-specific signal handler for loongarch64 hosts")
Reported-by: Song Gao <gaosong@loongson.cn>
Suggested-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220104215027.2180972-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bitwise operations are easy to fold, because the operation is
identical regardless of element size. But add and sub need
extra element size info that is not currently propagated.
Fixes: 2f9f08ba43
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/799
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Cleanup of PowerNV PHBs (Daniel and Cedric)
* Cleanup and fixes for PPC405 machine (Cedric)
* Fix for xscvspdpn (Matheus)
* Rework of powerpc exception handling 1/n (Fabiano)
* Optimisation for PMU (Richard and Daniel)
-----BEGIN PGP SIGNATURE-----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=eKtt
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220104' of https://github.com/legoater/qemu into staging
ppc 7.0 queue:
* Cleanup of PowerNV PHBs (Daniel and Cedric)
* Cleanup and fixes for PPC405 machine (Cedric)
* Fix for xscvspdpn (Matheus)
* Rework of powerpc exception handling 1/n (Fabiano)
* Optimisation for PMU (Richard and Daniel)
# gpg: Signature made Mon 03 Jan 2022 11:04:06 PM PST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20220104' of https://github.com/legoater/qemu: (26 commits)
target/ppc: do not call hreg_compute_hflags() in helper_store_mmcr0()
target/ppc: Use env->pnc_cyc_cnt
target/ppc: Rewrite pmu_increment_insns
target/ppc: Cache per-pmc insn and cycle count settings
target/ppc: powerpc_excp: Stop passing excp_model around
target/ppc: powerpc_excp: Move system call vectored code together
target/ppc: powerpc_excp: Set vector earlier
target/ppc: powerpc_excp: Add excp_vectors bounds check
target/ppc: powerpc_excp: Set alternate SRRs directly
target/ppc: do not silence snan in xscvspdpn
ppc/ppc405: Dump specific registers
ppc/ppc405: Introduce a store helper for SPR_40x_PID
ppc/ppc405: Fix timer initialization
ppc/ppc405: Rework ppc_40x_timers_init() to use a PowerPCCPU
ppc/ppc405: Restore TCR and STR write handlers
ppc/ppc405: Activate MMU logs
ppc/ppc4xx: Convert printfs()
target/ppc: Print out literal exception names in logs
target/ppc: Remove static inline
target/ppc: Check effective address validity
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
MMCR0 writes will change only MMCR0 bits which are used to calculate
HFLAGS_PMCC0, HFLAGS_PMCC1 and HFLAGS_INSN_CNT hflags. No other machine
register will be changed during this operation. This means that
hreg_compute_hflags() is overkill for what we need to do.
pmu_update_summaries() is already updating HFLAGS_INSN_CNT without
calling hreg_compure_hflags(). Let's do the same for the other 2 MMCR0
hflags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220103224746.167831-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the cached pmc_cyc_cnt value in pmu_update_cycles
and pmc_update_overflow_timer. This leaves pmc_get_event
and pmc_is_inactive unused, so remove them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103224746.167831-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the cached pmc_ins_cnt value. Unroll the loop over the
different PMC counters. Treat the PMC4 run-latch specially.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103224746.167831-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the combination of frozen bit and counter type, on a per
counter basis. So far this is only used by HFLAGS_INSN_CNT, but
will be used more later.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[danielhb: fixed PMC4 cyc_cnt shift, insn run latch code,
MMCR0_FC handling, "PMC[1-6]" comment]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220103224746.167831-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We can just access it directly in powerpc_excp.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[ clg: Took into account removal of inline ]
Message-Id: <20211229165751.3774248-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that 'vector' is known before calling the interrupt-specific setup
code, we can move all of the scv setup into one place.
No functional change intended.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211229165751.3774248-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
None of the interrupt setup code touches 'vector', so we can move it
earlier in the function. This will allow us to later move the System
Call Vectored setup that is on the top level into the
POWERPC_EXCP_SYSCALL_VECTORED code block.
This patch also moves the verification for when 'excp' does not have
an address associated with it. We now bail a little earlier when that
is the case. This should not cause any visible effects.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The next patch will start accessing the excp_vectors array earlier in
the function, so add a bounds check as first thing here.
This converts the empty return on POWERPC_EXCP_NONE to an error. This
exception number never reaches this function and if it does it
probably means something else went wrong up the line.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There are currently only two interrupts that use alternate SRRs, so
let them write to them directly during the setup code.
No functional change intended.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The non-signalling versions of VSX scalar convert to shorter/longer
precision insns doesn't silence SNaNs in the hardware. To better match
this behavior, use the non-arithmatic conversion of helper_todouble
instead of float32_to_float64. A test is added to prevent future
regressions.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211228120310.1957990-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rework slightly ppc_cpu_dump_state() to replace the various 'if'
statements with a 'switch'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-10-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PID SPR of the 405 CPU contains the translation ID of the TLB
which is a 8-bit field. Enforce the mask with a store helper.
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-8-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Timers are already initialized in ppc4xx_init(). No need to do it a
second time with a wrong set.
Fixes: d715ea9612 ("PPC: 405: Fix ppc405ep initialization")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-8-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a small cleanup to ease reading. It includes the removal of a
check done on the returned value of g_malloc0(), which can not fail.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 timers were broken when booke support was added. Assumption
was made that the register numbers were the same but it's not :
SPR_BOOKE_TSR (0x150)
SPR_BOOKE_TCR (0x154)
SPR_40x_TSR (0x3D8)
SPR_40x_TCR (0x3DA)
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: ddd1055b07 ("PPC: booke timers")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no need to deactivate MMU logging at compile time. Remove all
use of defines. Only keep DUMP_PAGE_TABLES for another series since
page tables could be dumped from the monitor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103063441.3424853-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use a QEMU log primitive for errors and trace events for debug.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.drobear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211222064025.1541490-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It facilitates reading the logs when mask CPU_LOG_INT is activated. We
should do the same for error codes.
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211222064025.1541490-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The compiler should know better how to inline code if necessary.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103063441.3424853-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
For Radix translation, the EA range is 64-bits. when EA(2:11) are
nonzero, a segment interrupt should occur.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20211231073122.3183583-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This change has the same motivation as the one done for pnv-phb3-root-bus
buses previously. Defaulting every bus to 'root-bus' makes it impossible to attach
root ports to specific buses and it doesn't allow for custom bus
naming because we're ignoring the 'id' value when registering the root
bus.
After this patch, creating pnv-phb4 devices with 'id' being set will
result in the following qtree:
qemu-system-ppc64 -m 4G -machine powernv9,accel=tcg \
-device pnv-phb4,chip-id=0,index=0,id=pcie.0 \
-device pnv-phb4,chip-id=1,index=4,id=pcie.1
bus: main-system-bus
type System
dev: pnv-phb4, id "pcie.1"
index = 4 (0x4)
chip-id = 1 (0x1)
version = 704374636546 (0xa400000002)
device-id = 1217 (0x4c1)
x-config-reg-migration-enabled = true
bypass-iommu = false
bus: pcie.1
type pnv-phb4-root-bus
dev: pnv-phb4, id "pcie.0"
index = 0 (0x0)
chip-id = 0 (0x0)
version = 704374636546 (0xa400000002)
device-id = 1217 (0x4c1)
x-config-reg-migration-enabled = true
bypass-iommu = false
bus: pcie.0
type pnv-phb4-root-bus
And without setting any ids:
qemu-system-ppc64 -m 4G -machine powernv9,accel=tcg \
-device pnv-phb4,chip-id=0,index=0,id=pcie.0 \
-device pnv-phb4,chip-id=1,index=4,id=pcie.1
bus: main-system-bus
type System
dev: pnv-phb4, id ""
index = 4 (0x4)
chip-id = 1 (0x1)
version = 704374636546 (0xa400000002)
device-id = 1217 (0x4c1)
x-config-reg-migration-enabled = true
bypass-iommu = false
bus: pnv-phb4-root-bus.1
type pnv-phb4-root-bus
dev: pnv-phb4, id ""
index = 0 (0x0)
chip-id = 0 (0x0)
version = 704374636546 (0xa400000002)
device-id = 1217 (0x4c1)
x-config-reg-migration-enabled = true
bypass-iommu = false
bus: pnv-phb4-root-bus.0
type pnv-phb4-root-bus
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211228193806.1198496-17-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
All pnv-phb3-root-bus buses are being created as 'root-bus'. This
makes it impossible to, for example, add a pnv-phb3-root-port in
a specific root bus, since they all have the same name. By default
the device will be parented by the pnv-phb3 device that precedeced it in
the QEMU command line.
Moreover, this doesn't all for custom bus naming. Libvirt, for instance,
likes to name these buses as 'pcie.N', where 'N' is the index value of
the controller in the domain XML, by using the 'id' command line
attribute. At this moment this is also being ignored - the created root
bus will always be named 'root-bus'.
This patch fixes both scenarios by removing the 'root-bus' name from the
pci_register_root_bus() call. If an "id" is provided, use that.
Otherwise use 'NULL' as bus name. The 'NULL' value will be handled in
qbus_init_internal() and it will defaulted as lowercase bus type + the
global bus_id value.
After this path we can define the bus name by using the 'id' attribute:
qemu-system-ppc64 -m 4G -machine powernv8,accel=tcg \
-device pnv-phb3,chip-id=0,index=1,id=pcie.0
dev: pnv-phb3, id "pcie.0"
index = 1 (0x1)
chip-id = 0 (0x0)
x-config-reg-migration-enabled = true
bypass-iommu = false
bus: pcie.0
type pnv-phb3-root-bus
And without an 'id' we will have the following default:
qemu-system-ppc64 -m 4G -machine powernv8,accel=tcg \
-device pnv-phb3,chip-id=0,index=1
dev: pnv-phb3, id ""
index = 1 (0x1)
chip-id = 0 (0x0)
x-config-reg-migration-enabled = true
bypass-iommu = false
bus: pnv-phb3-root-bus.0
type pnv-phb3-root-bus
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211228193806.1198496-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PHB4 reset handler was preparing ground for PHB5 to set
appropriately the device id. We don't need it for the PHB4 since the
device id is already set in the root port complex. PH5 will introduce
its own.
"device-id" property is now useless. It should be removed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211222063817.1541058-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The POWER8 processors with a NVLink logic unit have 4 PHB3 devices per
chip.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211222063817.1541058-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Disable check-python-tox
Fix emulation of hppa STBY insn
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmHTMwQdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9Rhgf/fFVZTVKscFhrnjzH
T7PjP3c6TeVpFU8uIb6h1NC0Ugyo4rBds2Gg/qIE+/X8jvDIHa6/aW1HKacWq6Uq
3Qea+FU56Oc8BpH1CQZEMR/U2ChDofvtcXf/PGHklnpgYCqZctkpNAFPdWlpT9Fx
jy2Y29rGijV1Q2GEXqD8H6Ij6SX+QZBO5DYaiqGsLSWMS8W2a58rfahBBgslvL82
UkpJ7TMzvERN8XPBlFOzvqzgSUX4CObAxn2/EiFT4rXukRbVuf5PbDtl2nNRtcS4
Rfu59GsrHz0tgl3JTRZ/5ab7Na/w8ewknCUPtNygf0k8kKZn8IhDDMhT0ekepoZ9
dsynQg==
=WrNf
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-20220103' of https://gitlab.com/rth7680/qemu into staging
Fix some meson conversion breakage
Disable check-python-tox
Fix emulation of hppa STBY insn
# gpg: Signature made Mon 03 Jan 2022 09:31:48 AM PST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-misc-20220103' of https://gitlab.com/rth7680/qemu:
gitlab: Disable check-python-tox
target/hppa: Fix atomic_store_3 for STBY
tests/tcg: Unconditionally use 90 second timeout
tests/tcg: Use $cpu in configure.sh
meson: Unify mips and mips64 in host_arch
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Set this test to be manually run, until failures can be fixed.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Clarify qdev_connect_gpio_out() documentation
- Rework test-smp-parse tests following QOM style
- Introduce CPU cluster topology support (Yanan Wang)
- MAINTAINERS updates (Yanan Wang, Li Zhijian, myself)
-----BEGIN PGP SIGNATURE-----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=gP1z
-----END PGP SIGNATURE-----
Merge tag 'machine-core-20211231' of https://github.com/philmd/qemu into staging
Machine core patches
- Clarify qdev_connect_gpio_out() documentation
- Rework test-smp-parse tests following QOM style
- Introduce CPU cluster topology support (Yanan Wang)
- MAINTAINERS updates (Yanan Wang, Li Zhijian, myself)
# gpg: Signature made Fri 31 Dec 2021 04:45:35 AM PST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'machine-core-20211231' of https://github.com/philmd/qemu:
MAINTAINERS: email address change
MAINTAINERS: Change philmd's email address
MAINTAINERS: Self-recommended as reviewer of "Machine core"
tests/unit/test-smp-parse: Keep default MIN/MAX CPUs in machine_base_class_init
tests/unit/test-smp-parse: No need to explicitly zero MachineClass members
tests/unit/test-smp-parse: Add testcases for CPU clusters
hw/core/machine: Introduce CPU cluster topology support
qemu-options: Improve readability of SMP related Docs
hw/core: Rename smp_parse() -> machine_parse_smp_config()
tests/unit/test-smp-parse: Constify some pointer/struct
tests/unit/test-smp-parse: Simplify pointer to compound literal use
tests/unit/test-smp-parse: Add 'smp-generic-valid' machine type
tests/unit/test-smp-parse: Add 'smp-generic-invalid' machine type
tests/unit/test-smp-parse: Add 'smp-with-dies' machine type
tests/unit/test-smp-parse: Split the 'generic' test in valid / invalid
tests/unit/test-smp-parse: Pass machine type as argument to tests
hw/qdev: Rename qdev_connect_gpio_out*() 'input_pin' parameter
hw/qdev: Correct qdev_connect_gpio_out_named() documentation
hw/qdev: Correct qdev_init_gpio_out_named() documentation
hw/qdev: Cosmetic around documentation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fujitsu's mail service has migrated to O365 months ago, the
lizhijian@cn.fujitsu.com address will stop working on 2022-06-01,
change it to my new email address lizhijian@fujitsu.com.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20211231050901.360-1-lizhijian@cn.fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The philmd@redhat.com email address will stop working on
2022-01-01, change it to my personal email address.
Update .mailmap in case anyone wants to send me an email
because of some past commit I authored.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211231000759.707519-1-philmd@redhat.com>
I've built interests in the generic machine subsystem and
have also been working on projects related to this part,
self-recommand myself as a reviewer so that I can help to
review some patches familiar to me, and have a chance to
learn more continuously.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-8-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Most machine types in test-smp-parse will be OK to have the default
MIN/MAX CPUs except "smp-generic-invalid", let's keep the default
values in machine_base_class_init which will be inherited. And if
we hope a different value for a specific machine, modify it in its
own initialization function.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-7-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The default value of the MachineClass members is 0, which
means we don't have to explicitly zero them. Also the value
of "mc->smp_props.prefer_sockets" will be taken care of by
smp_parse_test(), we don't necessarily need the statement
in machine_base_class_init() either.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-6-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add testcases for parsing of the four-level CPU topology hierarchy,
ie sockets/clusters/cores/threads, which will be supported on ARM
virt machines.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-5-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The new Cluster-Aware Scheduling support has landed in Linux 5.16,
which has been proved to benefit the scheduling performance (e.g.
load balance and wake_affine strategy) on both x86_64 and AArch64.
So now in Linux 5.16 we have four-level arch-neutral CPU topology
definition like below and a new scheduler level for clusters.
struct cpu_topology {
int thread_id;
int core_id;
int cluster_id;
int package_id;
int llc_id;
cpumask_t thread_sibling;
cpumask_t core_sibling;
cpumask_t cluster_sibling;
cpumask_t llc_sibling;
}
A cluster generally means a group of CPU cores which share L2 cache
or other mid-level resources, and it is the shared resources that
is used to improve scheduler's behavior. From the point of view of
the size range, it's between CPU die and CPU core. For example, on
some ARM64 Kunpeng servers, we have 6 clusters in each NUMA node,
and 4 CPU cores in each cluster. The 4 CPU cores share a separate
L2 cache and a L3 cache tag, which brings cache affinity advantage.
In virtualization, on the Hosts which have pClusters (physical
clusters), if we can design a vCPU topology with cluster level for
guest kernel and have a dedicated vCPU pinning. A Cluster-Aware
Guest kernel can also make use of the cache affinity of CPU clusters
to gain similar scheduling performance.
This patch adds infrastructure for CPU cluster level topology
configuration and parsing, so that the user can specify cluster
parameter if their machines support it.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211228092221.21068-3-wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Added '(since 7.0)' to @clusters in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
