Introduce a small helper to wait for a migration event, generalized from
the incoming migration path. Make the helper easier to use by allowing it
to keep waiting until the expected event is received.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The tests are only allowed to run in systems that know about the
O_DIRECT flag and in filesystems which support it.
Note: this also brings back migrate_set_parameter_bool() which went
away when we removed the compression tests. I copied it verbatim.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Alter migrate_qmp() to allow use of channels parameter, but only
fill the uri with correct port number if there are no channels.
Here we don't want to allow the wrong cases of having both or
none (ex: migrate_qmp_fail).
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-7-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Alter migrate_qmp_fail() to allow both uri and channels
independently. For channels, convert string to a Dict.
No dealing with migrate_get_socket_address() here because
we will fail before starting the migration anyway.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-5-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add the 'to' object into migrate_qmp(), so we can use
migrate_get_socket_address() inside migrate_qmp() to get
the port value. This is not applied to other migrate_qmp*
because they don't need the port.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-2-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Our usage of gtest results in us losing the very basic functionality
of "knowing which test failed". The issue is that gtest only prints
test names ("paths" in gtest parlance) once the test has finished, but
we use asserts in the tests and crash gtest itself before it can print
anything. We also use a final abort when the result of g_test_run is
not 0.
Depending on how the test failed/broke we can see the function that
trigged the abort, which may be representative of the test, but it
could also just be some generic function.
We have been relying on the primitive method of looking at the name of
the previous successful test and then looking at the code to figure
out which test should have come next.
Add a wrapper to the test registration that does the job of printing
the test name before running.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a test case to verify that the suspended state is handled correctly
during live migration precopy. The test suspends the src, migrates, then
wakes the dest.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-12-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Define a state object to capture events seen by migration tests, to allow
more events to be captured in a subsequent patch, and simplify event
checking in wait_for_migration_pass. No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-10-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Accept the QTEST_QEMU_MACHINE_TYPE environment variable to take a
machine type to use in the tests.
The full machine type is recognized (e.g. pc-q35-8.2). Aliases
(e.g. pc) are also allowed and resolve to the latest machine version
for that alias, or, if using two QEMU binaries, to the latest common
machine version between the two.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-12-farosas@suse.de>
When using two different QEMU binaries for migration testing, we'll
need to find what is the machine version that will work with both
binaries. Add a helper for that.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-7-farosas@suse.de>
There is currently no way to write a test for errors that happened in
qmp_migrate before the migration has started.
Add a version of qmp_migrate that ensures an error happens. To make
use of it a test needs to set MigrateCommon.result as
MIG_TEST_QMP_ERROR.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-6-farosas@suse.de>
file-based migration requires the target to initiate its migration after
the source has finished writing out the data in the file. Currently
there's no easy way to initiate 'migrate-incoming', allow this by
introducing migrate_incoming_qmp helper, similarly to migrate_qmp.
Also make sure migration events are enabled and wait for the incoming
migration to start before returning. This avoid a race when querying
the migration status too soon after issuing the command.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-3-farosas@suse.de>
The following patch will make use of this function from within
migrate-helpers.c, so move it there.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-2-farosas@suse.de>
When running migration tests we monitor for a STOP event so we can skip
redundant waits. This will be needed for the RESUME event too shortly.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-8-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Most usage of wait_command() is followed by qobject_unref(), which
is just a verbose re-implementation of qtest_qmp_assert_success().
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-7-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Change the migration test to use the new qtest event callback to watch
for the stop event. This ensures that we only watch for the STOP event
on the source QEMU. The previous code would set the single 'got_stop'
flag when either source or dest QEMU got the STOP event.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-6-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This function duplicates logic of qtest_qmp_assert_success_ref.
The qtest_qmp_assert_success_ref method has better diagnostics
on failure because it prints the entire QMP response, instead
of just asserting on existance of the 'error' key.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-4-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-6-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test case 'test_migrate_fd_proto' calls socketpair() which does
not exist on win32. Exclude it. The helper function wait_command_fd()
is not needed anymore, hence exclude it too.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220824094029.1634519-22-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add dirty page rate limit test if kernel support dirty ring,
The following qmp commands are covered by this test case:
"calc-dirty-rate", "query-dirty-rate", "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit" and "query-vcpu-dirty-limit".
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <eed5b847a6ef0a9c02a36383dbdd7db367dd1e7e.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Various methods in the migration test call 'query_migrate' to fetch the
current status and then access a particular field. Almost all of these
cases expect the migration to be in a non-failed state. In the case of
'wait_for_migration_pass' in particular, if the status is 'failed' then
it will get into an infinite loop. By validating that the status is
not 'failed' the test suite will assert rather than hang when getting
into an unexpected state.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-10-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Since commit a2ce7dbd91 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
