Add MapCache argument to xen_invalidate_map_cache_entry_unlocked.
This is in preparation for supporting multiple map caches.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240430164939.925307-9-edgar.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add MapCache argument to xen_replace_cache_entry_unlocked in
preparation for supporting multiple map caches.
No functional change.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240430164939.925307-8-edgar.iglesias@gmail.com>
[PMD: Remove last global mapcache pointer, reported by sstabellini]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Break out xen_ram_addr_from_mapcache_single(), a multi-cache
aware version of xen_ram_addr_from_mapcache.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240430164939.925307-7-edgar.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add MapCache argument to xen_remap_bucket in preparation
to support multiple map caches.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240430164939.925307-6-edgar.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Make xen_map_cache take a MapCache as argument. This is in
prepaparation to support multiple map caches.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240430164939.925307-5-edgar.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Make the lock functions take MapCache * as argument. This is
in preparation for supporting multiple caches.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240430164939.925307-4-edgar.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Today xen_ram_addr_from_mapcache() will either abort() or return 0 in
case it can't find a matching entry for a pointer value. Both cases
are bad, so change that to return an invalid address instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20231005181629.4046-5-vikram.garhwal@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240430164939.925307-3-edgar.iglesias@gmail.com>
[PMD: Keep xen_ram_addr_from_mapcache_not_found trace event]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
qemu_plugin_vcpu_exit_hook() is specific to TCG plugins,
so must be restricted to it in cpu_common_unrealizefn(),
similarly to how qemu_plugin_create_vcpu_state() is
restricted in the cpu_common_realizefn() counterpart.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240429213050.55177-2-philmd@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
* Fix a possible abort in the "edu" device
* Add missing qga stubs for stand-alone qga builds and re-enable qga-ssh-test
* Fix memory corruption caused by the stm32l4x5 uart device
* Update the s390x custom runner to Ubuntu 22.04
* Fix READ NATIVE MAX ADDRESS IDE commands to avoid a possible crash
* Shorten the runtime of Cirrus-CI jobs
-----BEGIN PGP SIGNATURE-----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=0OB7
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-04-30' of https://gitlab.com/thuth/qemu into staging
* Clean-ups for "errp" handling in s390x cpu_model code
* Fix a possible abort in the "edu" device
* Add missing qga stubs for stand-alone qga builds and re-enable qga-ssh-test
* Fix memory corruption caused by the stm32l4x5 uart device
* Update the s390x custom runner to Ubuntu 22.04
* Fix READ NATIVE MAX ADDRESS IDE commands to avoid a possible crash
* Shorten the runtime of Cirrus-CI jobs
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYwmaMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUCERAAss5PJMG8rI4i4X/3nW49JYTlPOpgm/YX
# /UWF+eHUlqaqDdE0s+Pdw4Ozo3hXQt/E/CkcyflUTzVpnZtpv9vkhNWyjOoPV31v
# GQyQEzGvxZXl2S595XefyAyaMTP5maBhUTlyZWJo385cQraa60Ot5d4Mibr2CobY
# gIBRxEGB/frJYpbHJPxd/FxJV120gtuWAdZwGGYYYjwMzf2IKu2veODB8CnUErlX
# WNUsIzjtAslfh8Ek2ZmPzD7uktCUeigkukqIrLC1oEU3wzbJHkISv1kXCKPW/Nf6
# ISjVa5TqGwkiiF8fw9aYKvWrnPJS7JkhXw7Gz+b39d846kUdNyDfgLcYJeNS3cZ2
# R1xgR9B6hX8ZmikMbGC+0/Sv15u2Yr+bFxJBTJzq6zdOAb9EJNQY1hW2w/Lbrg3X
# LjY+ltcVweoSILT6AE6vGDPCHfBzO+6FcptFvw7ePvRGOlwAPZ3tEB9G2LEbCYgg
# BjWNP4aRuSfbUebO4x4Todz65WN8aY1EIBXORU/wgUlF2+zajWiOI5JRDKjWz2qQ
# gAMeCbLplli5bYrChWtouRIXtb061cQloULddu/SRFcaJOlV3SCzx4JfN15pU90s
# jRMIhMESAEj4NSfclhxsOiYp3ywZTvlQsVA6MgPlu2i3HJakQnt5zbg59TesRn2d
# r5PfAk83UnA=
# =0OB7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Apr 2024 12:11:31 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-04-30' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/cirrus: Remove the netbsd and openbsd jobs
.gitlab-ci.d/cirrus.yml: Shorten the runtime of the macOS and FreeBSD jobs
tests/qtest/ide-test: Verify READ NATIVE MAX ADDRESS is not limited
hw/ide/core.c (cmd_read_native_max): Avoid limited device parameters
gitlab: remove stale s390x-all-linux-static conf hacks
gitlab: migrate the s390x custom machine to 22.04
build-environment: make some packages optional
hw/char/stm32l4x5_usart: Fix memory corruption by adding correct class_size
qga: Re-enable the qga-ssh-test when running without fuzzing
stubs: Add missing qga stubs
hw: misc: edu: use qemu_log_mask instead of hw_error
hw: misc: edu: rename local vars in edu_check_range
hw: misc: edu: fix 2 off-by-one errors
target/s390x/cpu_models_sysemu: Drop local @err in apply_cpu_model()
target/s390x/cpu_models: Make kvm_s390_apply_cpu_model() return boolean
target/s390x/cpu_models: Drop local @err in get_max_cpu_model()
target/s390x/cpu_models: Make kvm_s390_get_host_cpu_model() return boolean
target/s390x/cpu_model: Drop local @err in s390_realize_cpu_model()
target/s390x/cpu_model: Make check_compatibility() return boolean
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Exposing SYSCFG inputs to the SoC is practical in order to wire the SoC
to the optional DM163 display from the board code (GPIOs outputs need
to be connected to both SYSCFG inputs and DM163 inputs).
STM32L4x5 SYSCFG in-irq interception needed to be changed accordingly.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This device implements the IM120417002 colors shield v1.1 for Arduino
(which relies on the DM163 8x3-channel led driving logic) and features
a simple display of an 8x8 RGB matrix. The columns of the matrix are
driven by the DM163 and the rows are driven externally.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-2-ines.varhol@telecom-paris.fr
[PMM: updated to new reset hold method prototype]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use little endian for derivative OTP fuse key.
Cc: qemu-stable@nongnu.org
Fixes: c752bb079b ("hw/nvram: NPCM7xx OTP device model")
Suggested-by: Avi Fishman <Avi.Fishman@nuvoton.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240422125813.1403-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"make check-qtest-aarch64" recently started failing on FreeBSD builds,
and valgrind on Linux also detected that there is something fishy with
the new stm32l4x5-usart: The code forgot to set the correct class_size
here, so the various class_init functions in this file wrote beyond
the allocated buffer when setting the subc->type field.
Fixes: 4fb37aea7e ("hw/char: Implement STM32L4x5 USART skeleton")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240429075908.36302-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DMA descriptor structures for this device have
a set of "address extension" fields which extend the 32
bit source addresses with an extra 16 bits to give a
48 bit address:
https://docs.amd.com/r/en-US/ug1085-zynq-ultrascale-trm/ADDR_EXT-Field
However, we misimplemented this address extension in several ways:
* we only extracted 12 bits of the extension fields, not 16
* we didn't shift the extension field up far enough
* we accidentally did the shift as 32-bit arithmetic, which
meant that we would have an overflow instead of setting
bits [47:32] of the resulting 64-bit address
Add a type cast and use extract64() instead of extract32()
to avoid integer overflow on addition. Fix bit fields
extraction according to documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: d3c6369a96 ("introduce xlnx-dpdma")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Message-id: 20240428181131.23801-1-adiupina@astralinux.ru
[PMM: adjusted commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In previous versions of the Arm architecture, the frequency of the
generic timers as reported in CNTFRQ_EL0 could be any IMPDEF value,
and for QEMU we picked 62.5MHz, giving a timer tick period of 16ns.
In Armv8.6, the architecture standardized this frequency to 1GHz.
Because there is no ID register feature field that indicates whether
a CPU is v8.6 or that it ought to have this counter frequency, we
implement this by changing our default CNTFRQ value for all CPUs,
with exceptions for backwards compatibility:
* CPU types which we already implement will retain the old
default value. None of these are v8.6 CPUs, so this is
architecturally OK.
* CPUs used in versioned machine types with a version of 9.0
or earlier will retain the old default value.
The upshot is that the only CPU type that changes is 'max'; but any
new type we add in future (whether v8.6 or not) will also get the new
1GHz default.
It remains the case that the machine model can override the default
value via the 'cntfrq' QOM property (regardless of the CPU type).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240426122913.3427983-5-peter.maydell@linaro.org
Currently the sbsa_gdwt watchdog device hardcodes its frequency at
62.5MHz. In real hardware, this watchdog is supposed to be driven
from the system counter, which also drives the CPU generic timers.
Newer CPU types (in particular from Armv8.6) should have a CPU
generic timer frequency of 1GHz, so we can't leave the watchdog
on the old QEMU default of 62.5GHz.
Make the frequency a QOM property so it can be set by the board,
and have our only board that uses this device set that frequency
to the same value it sets the CPU frequency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240426122913.3427983-4-peter.maydell@linaro.org
Currently QEMU CPUs always run with a generic timer counter frequency
of 62.5MHz, but ARMv8.6 CPUs will run at 1GHz. For older versions of
the TF-A firmware that sbsa-ref runs, the frequency of the generic
timer is hardcoded into the firmware, and so if the CPU actually has
a different frequency then timers in the guest will be set
incorrectly.
The default frequency used by the 'max' CPU is about to change, so
make the sbsa-ref board force the CPU frequency to the value which
the firmware expects.
Newer versions of TF-A will read the frequency from the CPU's
CNTFRQ_EL0 register:
4c77fac98d
so in the longer term we could make this board use the 1GHz
frequency. We will need to make sure we update the binaries used
by our avocado test
Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_impdef
before we can do that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20240426122913.3427983-3-peter.maydell@linaro.org
clock_propagate() has an assert that clk->source is NULL, i.e. that
you are calling it on a clock which has no source clock. This made
sense in the original design where the only way for a clock's
frequency to change if it had a source clock was when that source
clock changed. However, we subsequently added multiplier/divider
support, but didn't look at what that meant for propagation.
If a clock-management device changes the multiplier or divider value
on a clock, it needs to propagate that change down to child clocks,
even if the clock has a source clock set. So the assertion is now
incorrect.
Remove the assertion.
Signed-off-by: Raphael Poggi <raphael.poggi@lynxleap.co.uk>
Message-id: 20240419162951.23558-1-raphael.poggi@lynxleap.co.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Rewrote the commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always use the native CHS device parameters for the ATA commands READ
NATIVE MAX ADDRESS and READ NATIVE MAX ADDRESS EXT, not those limited
by the ATA command INITIALIZE_DEVICE_PARAMETERS (introduced in patch
176e4961, hw/ide/core.c: Implement ATA INITIALIZE_DEVICE_PARAMETERS
command, 2022-07-07.)
As stated by the ATA/ATAPI specification, "[t]he native maximum is the
highest address accepted by the device in the factory default
condition." Therefore this patch substitutes the native values in
drive_heads and drive_sectors before calling ide_set_sector().
One consequence of the prior behavior was that setting zero sectors
per track could lead to an FPE within ide_set_sector(). Thanks to
Alexander Bulekov for reporting this issue.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1243
Signed-off-by: Lev Kujawski <lkujaw@mailbox.org>
Message-ID: <20221010085229.2431276-1-lkujaw@mailbox.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"make check-qtest-aarch64" recently started failing on FreeBSD builds,
and valgrind on Linux also detected that there is something fishy with
the new stm32l4x5-usart: The code forgot to set the correct class_size
here, so the various class_init functions in this file wrote beyond
the allocated buffer when setting the subc->type field.
Fixes: 4fb37aea7e ("hw/char: Implement STM32L4x5 USART skeleton")
Message-ID: <20240429075908.36302-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Log a guest error instead of a hardware error when
the guest tries to DMA to / from an invalid address.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Message-ID: <20221018122551.94567-3-cfriedt@meta.com>
[thuth: Add missing #include statement, fix error reported by checkpatch.pl]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This serves to make the local variables a bit less ambiguous.
The latter two arguments are named to match DMA_START, and
DMA_SIZE.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Message-ID: <20221018122551.94567-2-cfriedt@meta.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the case that size1 was zero, because of the explicit
'end1 > addr' check, the range check would fail and the error
message would read as shown below. The correct comparison
is 'end1 >= addr'.
EDU: DMA range 0x40000-0x3ffff out of bounds (0x40000-0x40fff)!
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1254
Signed-off-by: Chris Friedt <cfriedt@meta.com>
[thuth: Adjust patch with regards to the "end1 <= end2" check]
Message-ID: <20221018122551.94567-1-cfriedt@meta.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
rtc node need interrupts and interrupt-parent cells.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-18-gaosong@loongson.cn>
uart node need interrupts and interrupt-parent cells.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-17-gaosong@loongson.cn>
This patch removes the unused fdt irqchip node.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-16-gaosong@loongson.cn>
This patch adds pcie irq_map node for FDT.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-15-gaosong@loongson.cn>
The efi_system_table adds a efi_fdt configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-9-gaosong@loongson.cn>
The efi_system_table adds a efi_initrd configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-8-gaosong@loongson.cn>
The efi_system_table adds a efi_boot_memmap configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-7-gaosong@loongson.cn>
Add init_systab and set boot_info->a2
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-6-gaosong@loongson.cn>
Add init_cmline and set boot_info->a0, a1
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-5-gaosong@loongson.cn>
Load the slave CPU boot code at pflash0 and set
the slave CPU elf_address to VIRT_FLASH0_BASE.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-4-gaosong@loongson.cn>
we load initrd ramdisk after kernel_high address
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-3-gaosong@loongson.cn>
Move some boot functions to boot.c and struct
loongarch_boot_info into struct LoongArchMachineState.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240426091551.2397867-2-gaosong@loongson.cn>
We usually check target endianess before swapping values,
so target_words_bigendian() declaration makes sense in
"exec/tswap.h" with the target swapping helpers.
Remove "hw/core/cpu.h" when it was only included to get
the target_words_bigendian() declaration.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
-----BEGIN PGP SIGNATURE-----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=WEsU
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYqMhMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uVlD/47U3zYP33y4+wJcRScC0QI
# jYd82jS7GhD5YP5QPrIEMaSbDwtYGi4Rez1taaHvZ2fWLg2gE973iixmTaM2mXCd
# xPEqMsRXkFrQnC89K5/v9uR04AvHxoM8J2mD2OKnUT0RVBs38WxCUMLETBsD18/q
# obs1RzDRhEs5BnwwPMm5HI1iQeVvDRe/39O3w3rZfA8DuqerrNOQWuJd43asHYjO
# Gc1QzCGhALlXDoqk11IzjhJ7es8WbJ5XGvrSNe9QLGNJwNsu9oi1Ez+5WK2Eht9r
# eRvGNFjH4kQY1YCShZjhWpdzU9KT0+80KLirMJFcI3vUztrYZ027/rMyKLHVOybw
# YAqgEUELwoGVzacpaJg73f77uknKoXrfTH25DfoLX0yFCB35JHOPcjU4Uq1z1pfV
# I80ZcJBDJ95mXPfyKLrO+0IyVBztLybufedK2aiH16waEGDpgsJv66FB2QRuQBYW
# O0i6/4DEUZmfSpOmr8ct+julz7wCWSjbvo6JFWxzzxvD0M5T3AFKXZI244g1SMdh
# LS8V7WVCVzVJ5mK8Ujp2fVaIIxiBzlXVZrQftWv5rhyDOiIIeP8pdekmPlI6p5HK
# 3/2efzSYNL2UCDZToIq24El/3md/7vHR6DBfBT1/pagxWUstqqLgkJO42jQtTG0E
# JY1cZ/EQY7cqXGrww8lhWA==
# =WEsU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:36:03 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm: (37 commits)
tests/qtest: Add tests for the STM32L4x5 USART
hw/arm: Add the USART to the stm32l4x5 SoC
hw/char/stm32l4x5_usart: Add options for serial parameters setting
hw/char/stm32l4x5_usart: Enable serial read and write
hw/char: Implement STM32L4x5 USART skeleton
reset: Add RESET_TYPE_SNAPSHOT_LOAD
docs/devel/reset: Update to new API for hold and exit phase methods
hw, target: Add ResetType argument to hold and exit phase methods
scripts/coccinelle: New script to add ResetType to hold and exit phases
allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset
hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr
linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
hw/dma: avoid apparent overflow in soc_dma_set_request
hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI
target/arm: Add FEAT_NMI to max
hw/intc/arm_gicv3: Report the VINMI interrupt
hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()
hw/intc/arm_gicv3: Implement NMI interrupt priority
hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()
hw/intc/arm_gicv3: Add NMI handling CPU interface registers
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"cpu.h" is implicitly included. Include it explicitly to
avoid the following error when refactoring headers:
hw/s390x/s390-stattrib.c:86:40: error: use of undeclared identifier 'TARGET_PAGE_SIZE'
len = sac->peek_stattr(sas, addr / TARGET_PAGE_SIZE, buflen, vals);
^
hw/s390x/s390-stattrib.c:94:58: error: use of undeclared identifier 'TARGET_PAGE_MASK'
addr / TARGET_PAGE_SIZE, len, addr & ~TARGET_PAGE_MASK);
^
hw/s390x/s390-stattrib.c:224:40: error: use of undeclared identifier 'TARGET_PAGE_BITS'
qemu_put_be64(f, (start_gfn << TARGET_PAGE_BITS) | STATTR_FLAG_MORE);
^
In file included from hw/s390x/s390-virtio-ccw.c:17:
hw/s390x/s390-virtio-hcall.h:22:27: error: unknown type name 'CPUS390XState'
int s390_virtio_hypercall(CPUS390XState *env);
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Message-ID: <20240322162822.7391-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
