qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power
Added migration: only check page size match if RAM postcopy is enabled
-----BEGIN PGP SIGNATURE-----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=4tbe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210208a' into staging
Migration pull 2021-02-08
v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power
Added migration: only check page size match if RAM postcopy is enabled
# gpg: Signature made Mon 08 Feb 2021 11:28:14 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210208a: (27 commits)
migration: only check page size match if RAM postcopy is enabled
migration: introduce snapshot-{save, load, delete} QMP commands
iotests: fix loading of common.config from tests/ subdir
iotests: add support for capturing and matching QMP events
migration: introduce a delete_snapshot wrapper
migration: wire up support for snapshot device selection
migration: control whether snapshots are ovewritten
block: rename and alter bdrv_all_find_snapshot semantics
block: allow specifying name of block device for vmstate storage
block: add ability to specify list of blockdevs during snapshot
migration: stop returning errno from load_snapshot()
migration: Make save_snapshot() return bool, not 0/-1
block: push error reporting into bdrv_all_*_snapshot functions
migration: Display the migration blockers
migration: Add blocker information
migration: Fix a few absurdly defective error messages
migration: Fix cache_init()'s "Failed to allocate" error messages
migration: Clean up signed vs. unsigned XBZRLE cache-size
migration: Fix migrate-set-parameters argument validation
migration: introduce 'userfaultfd-wrlat.py' script
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Message-Id: <SYCPR01MB3502E9F6EB06DEDCD484F738FCBA9@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the modules that we are checking so far, we can be stricter about the
difference between Optional[T] and T types. Enable that check.
Enabling it now will assist review on further typing and cleanup work.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For everything typed so far, type this parameter as
Optional[QAPISourceInfo].
In the most generic case, QAPISchemaEntity's info field may be None to
represent types that come from built-in definitions. Although some
Entity types may not currently have any built-in definitions, it is not
easily possible to constrain the type except on an ad-hoc basis using
assertions.
It's easier and simpler, then, to just say it's always an Optional type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The previous commit removed the only user of QAPIGen(None). Tighten
the type hint.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-15-jsnow@redhat.com>
QAPISchemaGenCommandVisitor.visit_command() needs to generate the
marshalling function into the current module, and also generate its
registration into the ./init system module. The latter is done
somewhat awkwardly: .__init__() creates a QAPIGenCCode that will not
be written out, each .visit_command() adds its registration to it, and
.visit_end() copies its contents into the ./init module it creates.
Instead provide the means to temporarily switch to another module.
Create the ./init module in .visit_begin(), and generate its initial
part. Add registrations to it in .visit_command(). Finish it in
.visit_end().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-14-jsnow@redhat.com>
Many places assume they can access these fields without checking them
first to ensure they are defined. Eliminating the _genc and _genh fields
and replacing them with functional properties that check for correct
state can ease the typing overhead by eliminating the Optional[T] return
type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use a constant to make it obvious we're referring to a very specific thing.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With callers to _add_system_module now explicitly using the './' prefix
to indicate a system module, there is no longer any reason to have
separate interfaces for adding system vs user modules; use a unified
interface that differentiates based on the name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-10-jsnow@redhat.com>
Use './builtin' as the built-in module name instead of
None. Clarify the typing that this is now always a string.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaModularCVisitor._add_system_module() prefixes './' to its name
argument to make it a module name. Pass the module name instead. This
will allow us to coalesce the methods to add modules later on.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message reworded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaModularCVisitor._begin_system_module() is actually just for
the builtin module. Rename it to ._begin_builtin_module() and drop
its useless @name parameter.
Clarify conditionals in visit_module to make this clear.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-7-jsnow@redhat.com>
Define what a module is and define what kind of a module it is once and
for all, in one place.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We assert _start_if is not None in end_if, but that's opaque to mypy.
By inlining _wrap_ifcond, that constraint becomes provable to mypy.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mypy cannot understand that this match can never be None, so help it
along.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Actually, the arg_type can indeed be Optional.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When boxed is True, expr.py asserts that we must have
arguments. Ultimately, this should mean that if boxed is True that
arg_type should be defined. Mypy cannot infer this, and does not support
'stateful' type inference, e.g.:
```
if x:
assert y is not None
...
if x:
y.etc()
```
does not work, because mypy does not statefully remember the conditional
assertion in the second block. Help mypy out by creating a new local
that it can track more easily.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There are some places where the conditional makefile support is the
simplest solution. Now we don't expose CONFIG_TCG as a variable create
a new one that can be checked for the check-help output.
As check-tcg is a PHONY target we re-use check-softfloat to gate that
as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210202134001.25738-13-alex.bennee@linaro.org>
Commit 4e66c9ef64 "tracetool: add input filename and line number to
Event" forgot to add a line number and a filename argument at one
build method call site.
Traceback (most recent call last):
File "./scripts/simpletrace.py", line 261, in <module>
run(Formatter())
File "./scripts/simpletrace.py", line 236, in run
process(events, sys.argv[2], analyzer, read_header=read_header)
File "./scripts/simpletrace.py", line 177, in process
dropped_event =
Event.build("Dropped_Event(uint64_t num_events_dropped)")
TypeError: build() missing 2 required positional arguments:
'lineno' and 'filename'
Add the missing arguments.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210131173415.3392-1-vr_qemu@t-online.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Timestamps in tracing output can be distracting. Make it possible to
control tid/timestamp printing with -msg timestamp=on|off. The default
is no tid/timestamps. Previously they were always printed.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210125113507.224287-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
macro is not reset after use, so the format decoded is always the
one of the first "PRI" in the format string.
For instance:
vhost_vdpa_set_config(void *dev, uint32_t offset, uint32_t size, \
uint32_t flags) "dev: %p offset: %"PRIu32" \
size: %"PRIu32" flags: 0x%"PRIx32
generates:
printf("%d@%d vhost_vdpa_set_config dev: %p offset: %u size: %u \
flags: 0x%u\n", pid(), gettimeofday_ns(), dev, offset, \
size, flags)
for the "flags" parameter, we can see a "0x%u" rather than a "0x%x"
because the first macro was "PRIu32" (for offset).
In the loop, macro becomes "PRIu32PRIu32PRIx32", and c_macro_to_format()
returns always macro[3] ('u' in this case). This patch resets macro after
the format has been decoded.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210105191721.120463-3-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In macOS 11, QEMU only gets access to Hypervisor.framework if it has the
respective entitlement. Add an entitlement template and automatically self
sign and apply the entitlement in the build.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-22-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Kernel commit a85cbe6159ff ("uapi: move constants from
<linux/kernel.h> to <linux/const.h>") breaks our script
because of the unrecognized include. Let's add that to
our processing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210104202057.48048-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Without this checkpatch keeps complaining about new/changed files even
when MAINTAINERS has been updated. Normal invocations of checkpatch on
patch files rather than commit IDs are unaffected.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-13-alex.bennee@linaro.org>
When decodetree.py was added in commit 568ae7efae, QEMU was
using Python 2 which happily reads UTF-8 files in text mode.
Python 3 requires either UTF-8 locale or an explicit encoding
passed to open(). Now that Python 3 is required, explicit
UTF-8 encoding for decodetree source files.
To avoid further problems with the user locale, also explicit
UTF-8 encoding for the generated C files.
Explicit both input/output are plain text by using the 't' mode.
This fixes:
$ /usr/bin/python3 scripts/decodetree.py test.decode
Traceback (most recent call last):
File "scripts/decodetree.py", line 1397, in <module>
main()
File "scripts/decodetree.py", line 1308, in main
parse_file(f, toppat)
File "scripts/decodetree.py", line 994, in parse_file
for line in f:
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 80:
ordinal not in range(128)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210110000240.761122-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This script first runs the regular gdb's 'bt' command, and then if we are in a
coroutine it prints the coroutines backtraces in the order in which they
were called.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201217155436.927320-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code that dumps the stack frame works like that:
* save current registers
* overwrite current registers (including rip/rsp) with coroutine snapshot
in the jmpbuf
* print backtrace
* restore the saved registers.
If the user has currently selected a non topmost stack frame in gdb,
the above code will still restore the selected frame registers,
but the gdb will then lose the selected frame index, which makes it impossible
to switch back to frame 0, to continue debugging the executable.
Therefore switch temporarily to the topmost frame of the stack
for the above code.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201217155436.927320-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If previous write commands write the same length of data with the same step,
we view it as a hint.
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB3502480AD07811A6A49B8FEAFCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-M1: remove IO commands iteratively
-M2: try setting bits in operand of write/out to zero
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB350204C52E7A39E6B0EEC870FCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Simplifying the crash cases by opportunistically setting bits in operands of
out/write to zero may help to debug, since usually bit one means turn on or
trigger a function while zero is the default turn-off setting.
Tested bug https://bugs.launchpad.net/qemu/+bug/1908062
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB3502C84B6346A3E3DE708C7BFCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now we use a one-time scan and remove strategy in the minimizer,
which is not suitable for timing dependent instructions.
For example, instruction A will indicate an address where the config
chunk locates, and instruction B will make the configuration active.
If we have the following instruction sequence:
...
A1
B1
A2
B2
...
A2 and B2 are the actual instructions that trigger the bug.
If we scan from top to bottom, after we remove A1, the behavior of B1
might be unknowable, including not to crash the program. But we will
successfully remove B1 later cause A2 and B2 will crash the process
anyway:
...
A1
A2
B2
...
Now one more trimming will remove A1.
In the perfect case, we would need to be able to remove A and B (or C!) at
the same time. But for now, let's just add a loop around the minimizer.
Since we only remove instructions, this iterative algorithm is converging.
Tested with Bug 1908062.
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB350263004448040ACCB9A9F1FCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, we split the write commands' data from the middle. If it does not
work, try to move the pivot left by one byte and retry until there is no
space.
But, this method has two flaws:
1. It may fail to trim all unnecessary bytes on the right side.
For example, there is an IO write command:
write addr uuxxxxuu
u is the unnecessary byte for the crash. Unlike ram write commands, in most
case, a split IO write won't trigger the same crash, So if we split from the
middle, we will get:
write addr uu (will be removed in next round)
write addr xxxxuu
For xxxxuu, since split it from the middle and retry to the leftmost byte
won't get the same crash, we will be stopped from removing the last two
bytes.
2. The algorithm complexity is O(n) since we move the pivot byte by byte.
To solve the first issue, we can try a symmetrical position on the right if
we fail on the left. As for the second issue, instead moving by one byte, we
can approach the boundary exponentially, achieving O(log(n)).
Give an example:
xxxxuu len=6
+
|
+
xxx,xuu 6/2=3 fail
+
+--------------+-------------+
| |
+ +
xx,xxuu 6/2^2=1 fail xxxxu,u 6-1=5 success
+ +
+------------------+----+ |
| | +-------------+ u removed
+ +
xx,xxu 5/2=2 fail xxxx,u 6-2=4 success
+
|
+-----------+ u removed
In some rare cases, this algorithm will fail to trim all unnecessary bytes:
xxxxxxxxxuxxxxxx
xxxxxxxx-xuxxxxxx Fail
xxxx-xxxxxuxxxxxx Fail
xxxxxxxxxuxx-xxxx Fail
...
I think the trade-off is worth it.
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB3502D26F1BEB680CBBC169E5FCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead of removing IO instructions one by one, we can try deleting multiple
instructions at once. According to the locality of reference, we double the
number of instructions to remove for the next round and recover it to one
once we fail.
This patch is usually significant for large input.
Test with quadrupled trace input at:
https://bugs.launchpad.net/qemu/+bug/1890333/comments/1
Patched 1/6 version:
real 0m45.904s
user 0m16.874s
sys 0m10.042s
Refined version:
real 0m11.412s
user 0m6.888s
sys 0m3.325s
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB350280A67BB55C3FADF173E3FCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We spend much time waiting for the timeout program during the minimization
process until it passes a time limit. This patch hacks the CLOSED (indicates
the redirection file closed) notification in QTest's output if it doesn't
crash.
Test with quadrupled trace input at:
https://bugs.launchpad.net/qemu/+bug/1890333/comments/1
Original version:
real 1m37.246s
user 0m13.069s
sys 0m8.399s
Refined version:
real 0m45.904s
user 0m16.874s
sys 0m10.042s
Note:
Sometimes the mutated or the same trace may trigger a different crash
summary (second-to-last line) but indicates the same bug. For example, Bug
1910826 [1], which will trigger a stack overflow, may output summaries
like:
SUMMARY: AddressSanitizer: stack-overflow
/home/qiuhao/hack/qemu/build/../softmmu/physmem.c:488 in
flatview_do_translate
or
SUMMARY: AddressSanitizer: stack-overflow
(/home/qiuhao/hack/qemu/build/qemu-system-i386+0x27ca049) in __asan_memcpy
Etc.
If we use the whole summary line as the token, we may be prevented from
further minimization. So in this patch, we only use the first three words
which indicate the type of crash:
SUMMARY: AddressSanitizer: stack-overflow
[1] https://bugs.launchpad.net/qemu/+bug/1910826
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB350251DC04003450348FAF68FCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that timer_free() implicitly calls timer_del(), sequences
timer_del(mytimer);
timer_free(mytimer);
can be simplified to just
timer_free(mytimer);
Add a Coccinelle script to do this transformation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-3-peter.maydell@linaro.org
The compiler encounters trace event format strings in generated code.
Format strings are error-prone and therefore clear compiler errors are
important.
Use the #line directive to show the trace-events filename and line
number in format string errors:
https://gcc.gnu.org/onlinedocs/gcc-10.2.0/cpp/Line-Control.html
For example, if the cpu_in trace event's %u is changed to %p the
following error is reported:
trace-events:29:18: error: format ‘%p’ expects argument of type ‘void *’, but argument 7 has type ‘unsigned int’ [-Werror=format=]
Line 29 in trace-events is where cpu_in is defined. This works for any
trace-events file in the QEMU source tree and the correct path is
displayed.
Unfortunately there does not seem to be a way to set the column, so "18"
is not the right character on that line.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-5-stefanha@redhat.com>
Store the input filename and line number in Event.
A later patch will use this to improve error messages.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-4-stefanha@redhat.com>
Make the output file line number and next line number available to
out().
A later patch will use this to improve error messages.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-3-stefanha@redhat.com>
The tracetool.py script writes to stdout. This means the output filename
is not available to the script. Add the output filename to the
command-line so that the script has access to the filename.
This also simplifies the tracetool.py invocation. It's no longer
necessary to use meson's custom_build(capture : true) to save output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-2-stefanha@redhat.com>
Benchmark for new preallocate filter.
Example usage:
./bench_prealloc.py ../../build/qemu-img \
ssd-ext4:/path/to/mount/point \
ssd-xfs:/path2 hdd-ext4:/path3 hdd-xfs:/path4
The benchmark shows performance improvement (or degradation) when use
new preallocate filter with qcow2 image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-22-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make results_to_text a tool to dump results saved in JSON file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-21-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Performance improvements / degradations are usually discussed in
percentage. Let's make the script calculate it for us.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-20-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: 'seconds' instead of 'secs']
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move to generic format for floats and percentage for error.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-19-vsementsov@virtuozzo.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Let's keep view part in separate: this way it's better to improve it in
the following commits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-18-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Next patch will use utf8 plus-minus symbol, let's use more generic (and
more readable) name.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-17-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Standard deviation is more usual to see after +- than current maximum
of deviations.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-16-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Support benchmarks returning not seconds but iops. We'll use it for
further new test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-15-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-14-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sort .inc files along with the extension including them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201213205132.243628-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When needed, the G_GNUC_CHECK_VERSION() glib macro can be used instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201210134752.780923-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A comment in kernel-doc mentions QEMU's qatomic_set macro, but since
this code originated in Linux we should just revert it and stay as close
to the kernel's copy of the script as possible.
The change was introduced (more or less unintentionally) in QEMU commit
commit d73415a315, which did a global search-and-replace of QEMU's
atomic access macros.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sphinx C domain code after 3.2.1 will start complaning if :c:struct
would be used for an union type:
.../Documentation/gpu/drm-kms-helpers:352: ../drivers/video/hdmi.c:851: WARNING: C 'identifier' cross-reference uses wrong tag: reference name is 'union hdmi_infoframe' but found name is 'struct hdmi_infoframe'. Full reference name is 'union hdmi_infoframe'. Full found name is 'struct hdmi_infoframe'.
So, let's address this issue too in advance, in order to
avoid future issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6e4ec3eec914df62389a299797a3880ae4490f35.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-30-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The typedef regex for function prototypes are very complex.
Split them into 3 separate regex and then join them using
qr.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/3a4af999a0d62d4ab9dfae1cdefdfcad93383356.1603792384.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-29-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The include/linux/genalloc.h file defined this typedef:
typedef unsigned long (*genpool_algo_t)(unsigned long *map,unsigned long size,unsigned long start,unsigned int nr,void *data, struct gen_pool *pool, unsigned long start_addr);
Because it has a type composite of two words (unsigned long),
the parser gets the typedef name wrong:
.. c:macro:: long
**Typedef**: Allocation callback function type definition
Fix the regex in order to accept composite types when
defining a typedef for a function pointer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/328e8018041cc44f7a1684e57f8d111230761c4f.1603792384.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-28-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 19ab6044be.
We will replace the commit with the fix from Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-27-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 3cd3c5193c.
We will replace the commit with the fix from Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-26-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are a few namespace clashes by using c:macro everywhere:
basically, when using it, we can't have something like:
.. c:struct:: pwm_capture
.. c:macro:: pwm_capture
So, we need to use, instead:
.. c:function:: int pwm_capture (struct pwm_device * pwm, struct pwm_capture * result, unsigned long timeout)
for the function declaration.
The kernel-doc change was proposed by Jakob Lykke Andersen here:
6fd2076ec0
Although I did a different implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-25-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Address several issues related to pointing to the wrong line
number:
1) ensure that line numbers will always be initialized
When section is the default (Description), the line number
is not initializing, producing this:
$ ./scripts/kernel-doc --enable-lineno ./drivers/media/v4l2-core/v4l2-mem2mem.c|less
**Description**
#define LINENO 0
In case of streamoff or release called on any context,
1] If the context is currently running, then abort job will be called
2] If the context is queued, then the context will be removed from
the job_queue
Which is not right. Ensure that the line number will always
be there. After applied, the result now points to the right location:
**Description**
#define LINENO 410
In case of streamoff or release called on any context,
1] If the context is currently running, then abort job will be called
2] If the context is queued, then the context will be removed from
the job_queue
2) The line numbers for function prototypes are always + 1,
because it is taken at the line after handling the prototype.
Change the logic to point to the next line after the /** */
block;
3) The "DOC:" line number should point to the same line as this
markup is found, and not to the next one.
Probably part of the issues were due to a but that was causing
the line number offset to be incremented by one, if --export
were used.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-24-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When kernel-doc is called via kerneldoc.py, there's no need to
auto-detect the Sphinx version, as the Sphinx module already
knows it. So, add an optional parameter to allow changing the
Sphinx dialect.
As kernel-doc can also be manually called, keep the auto-detection
logic if the parameter was not specified. On such case, emit
a warning if sphinx-build can't be found at PATH.
I ended using a suggestion from Joe for using a more readable
regex, instead of using a complex one with a hidden group like:
m/^(\d+)\.(\d+)(?:\.?(\d+)?)/
in order to get the optional <patch> argument.
Thanks-to: Joe Perches <joe@perches.com>
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-23-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While kernel-doc needs to parse parameters in order to
identify its name, it shouldn't be touching the type,
as parsing it is very difficult, and errors happen.
One current error is when parsing this parameter:
const u32 (*tab)[256]
Found at ./lib/crc32.c, on this function:
u32 __pure crc32_be_generic (u32 crc, unsigned char const *p, size_t len, const u32 (*tab)[256], u32 polynomial);
The current logic mangles it, producing this output:
const u32 ( *tab
That's something that it is not recognizeable.
So, instead, let's push the argument as-is, and use it
when printing the function prototype and when describing
each argument.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-22-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some typedef expressions are output as normal functions.
As we need to be clearer about the type with Sphinx 3.x,
detect such cases.
While here, fix a wrongly-indented block.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-21-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, the build system doesn't use -nofunction, as
it is pretty much useless, because it doesn't consider
the other output modes (extern, internal), working only
with all.
Also, it is limited to exclude functions.
Re-implement it in order to allow excluding any symbols from
the document output, no matter what mode is used.
The parameter was also renamed to "-nosymbol", as it express
better its meaning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-20-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's currently a bug with the way kernel-doc script
counts line numbers that can be seen with:
$ ./scripts/kernel-doc -rst -enable-lineno include/linux/math64.h >all && ./scripts/kernel-doc -rst -internal -enable-lineno include/linux/math64.h >int && diff -U0 int all
--- int 2020-09-28 12:58:08.927486808 +0200
+++ all 2020-09-28 12:58:08.905486845 +0200
@@ -1 +1 @@
-#define LINENO 27
+#define LINENO 26
@@ -3 +3 @@
-#define LINENO 16
+#define LINENO 15
@@ -9 +9 @@
-#define LINENO 17
+#define LINENO 16
...
This is happening with perl version 5.30.3, but I'm not
so sure if this is a perl bug, or if this is due to something
else.
In any case, fixing it is easy. Basically, when "-internal"
parameter is used, the process_export_file() function opens the
handle "IN". This makes the line number to be incremented, as the
handler for the main open is also "IN".
Fix the problem by using a different handler for the
main open().
While here, add a missing close for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-19-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unfortunately, Sphinx 3.x parser for c functions is too pedantic:
https://github.com/sphinx-doc/sphinx/issues/8241
While it could be relaxed with some configurations, there are
several corner cases that it would make it hard to maintain,
and will require teaching conf.py about several macros.
So, let's instead use the :c:macro notation. This will
produce an output that it is not as nice as currently, but it
should still be acceptable, and will provide cross-references,
removing thousands of warnings when building with newer
versions of Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Sphinx 3.x, the ".. c:type:" tag was changed to accept either:
.. c:type:: typedef-like declaration
.. c:type:: name
Using it for other types (including functions) don't work anymore.
So, there are newer tags for macro, enum, struct, union, and others,
which doesn't exist on older versions.
Add a check for the Sphinx version and change the produced tags
accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 152d1967f6.
We will replace the commit with the fix from Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 92bb29f9b2.
We will replace the commit with the fix from Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PHY kernel-doc markup has gained support for documenting
a typedef enum.
However, right now the parser was not prepared for it.
So, add support for parsing it.
Fixes: 4069a572d423 ("net: phy: Document core PHY structures")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Subroutine dump_struct uses type attributes to check if the struct
syntax is valid. Then, it removes all attributes before using it for
output. `____cacheline_aligned` is an attribute that is
not included in both steps. Add it, since it is used by kernel structs.
Based on previous patch to add ____cacheline_aligned_in_smp.
Motivated by patches to reorder this attribute to before the
variable name. Whilst we could do that in all cases, that would
be a massive change and it is more common in the kernel to place
this particular attribute after the variable name. A quick grep
suggests approximately 400 instances of which 341 have this
attribute just before a semicolon and hence after the variable name.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200910185415.653139-1-jic23@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This should solve bad error reports like this one:
./include/linux/iio/iio.h:0: WARNING: Unknown target name: "devm".
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/56eed0ba50cd726236acd12b11b55ce54854c5ea.1599660067.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kbuild bot recently added the W=1 option, which triggered
documentation cleanups to squelch hundreds of kernel-doc warnings.
To make sure new kernel contributions don't add regressions to
kernel-doc descriptors, this patch suggests an option to treat
warnings as errors in CI/automated tests.
A -Werror command-line option is added to the kernel-doc script. When
this option is set, the script will return the number of warnings
found. The caller can then treat this positive return value as an
error and stop the build.
Using this command line option is however not straightforward when the
kernel-doc script is called from other scripts. To align with typical
kernel compilation or documentation generation, the Werror option is
also set by checking the KCFLAGS environment variable, or if
KDOC_WERROR is defined, as in the following examples:
KCFLAGS="-Wall -Werror" make W=1 sound/
KCFLAGS="-Wall -Werror" make W=1 drivers/soundwire/
KDOC_WERROR=1 make htmldocs
Note that in the last example the documentation build does not stop,
only an additional log is provided.
Credits to Randy Dunlap for suggesting the use of environment variables.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200728162040.92467-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are some function pointer prototypes inside the net
includes, like this one:
int (*pcs_config)(struct phylink_config *config, unsigned int mode,
phy_interface_t interface, const unsigned long *advertising);
There's nothing wrong using it with kernel-doc, but we need to
add a rule for it to parse such kind of prototype.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/fec520dd731a273013ae06b7653a19c7d15b9562.1592895969.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The __ETHTOOL_DECLARE_LINK_MODE_MASK macro is a variant of
DECLARE_BITMAP(), used by phylink.h. As we have already a
parser for DECLARE_BITMAP(), let's add one for this macro,
in order to avoid such warnings:
./include/linux/phylink.h:54: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising' not described in 'phylink_link_state'
./include/linux/phylink.h:54: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising' not described in 'phylink_link_state'
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d1d1dea67a28117c0b0c33271b139c4455fef287.1592895969.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200526060544.25127-1-grandmaster@al2klimov.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sphinx is very pedantic with respect to blank lines. Sometimes,
in order to make it to properly handle something, we need to
add a blank line. However, currently, any blank line inside a
kernel-doc comment like:
/*
* @foo: bar
*
* foobar
*
* some description
will be considered as if "foobar" was part of the description.
This patch changes kernel-doc behavior. After it, foobar will
be considered as part of the parameter text. The description
will only be considered as such if it starts with:
zero spaces after asterisk:
*foo
one space after asterisk:
* foo
or have a explicit Description section:
* Description:
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c07d2862792d75a2691d69c9eceb7b89a0164cc0.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a few places, it sometimes need to indicate a negation of a
parameter, like:
!@fshared
This pattern happens, for example, at:
kernel/futex.c
and it is perfectly valid. However, kernel-doc currently
transforms it into:
!**fshared**
This won't do what it would be expected.
Fortunately, fixing the script is a simple matter of storing
the "!" before "@" and adding it after the bold markup, like:
**!fshared**
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0314b47f8c3e1f9db00d5375a73dc3cddd8a21f2.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pattern @foo->bar() is valid, as it can be used by a
function pointer inside a struct passed as a parameter.
Right now, it causes a warning:
./drivers/firewire/core-transaction.c:606: WARNING: Inline strong start-string without end-string.
In this specific case, the kernel-doc markup is:
/**
* fw_core_remove_address_handler() - unregister an address handler
* @handler: callback
*
* To be called in process context.
*
* When fw_core_remove_address_handler() returns, @handler->callback() is
* guaranteed to not run on any CPU anymore.
*/
With seems valid on my eyes. So, instead of trying to hack
the kernel-doc markup, let's teach it about how to handle
such things. This should likely remove lots of other similar
warnings as well.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/48b46426d7bf6ff7529f20e5718fbf4e9758e62c.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, when kernel-doc encounters a macro with a named variable
argument[1], such as this:
#define hlist_for_each_entry_rcu(pos, head, member, cond...)
... it expects the variable argument to be documented as `cond...`,
rather than `cond`. This is semantically wrong, because the name (as
used in the macro body) is actually `cond`.
With this patch, kernel-doc will accept the name without dots (`cond`
in the example above) in doc comments, and warn if the name with dots
(`cond...`) is used and verbose mode[2] is enabled.
The support for the `cond...` syntax can be removed later, when the
documentation of all such macros has been switched to the new syntax.
Testing this patch on top of v5.4-rc6, `make htmldocs` shows a few
changes in log output and HTML output:
1) The following warnings[3] are eliminated:
./include/linux/rculist.h:374: warning:
Excess function parameter 'cond' description in 'list_for_each_entry_rcu'
./include/linux/rculist.h:651: warning:
Excess function parameter 'cond' description in 'hlist_for_each_entry_rcu'
2) For list_for_each_entry_rcu and hlist_for_each_entry_rcu, the
correct description is shown
3) Named variable arguments are shown without dots
[1]: https://gcc.gnu.org/onlinedocs/cpp/Variadic-Macros.html
[2]: scripts/kernel-doc -v
[3]: See also https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git/commit/?h=dev&id=5bc4bc0d6153617eabde275285b7b5a8137fdf3c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Subroutine dump_struct uses type attributes to check if the struct
syntax is valid. Then, it removes all attributes before using it for
output. `____cacheline_aligned_in_smp` is an attribute that is
not included in both steps. Add it, since it is used by kernel structs.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current regular expression for strip attributes of structs (and
for nested ones as well) also removes all whitespaces that may
surround the attribute. After that, the code will split structs and
iterate for each symbol separated by comma at the end of struct
definition (e.g. "} alias1, alias2;"). However, if the nested struct
does not have any alias and has an attribute, it will result in a
empty string at the closing bracket (e.g "};"). This will make the
split return nothing and $newmember will keep uninitialized. Fix
that, by ensuring that the attribute substitution will leave at least
one whitespace.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows us to do:
./scripts/ci/gitlab-pipeline-status -w -b HEAD -p 2961854
to check out own pipeline status of a recently pushed branch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201117173635.29101-2-alex.bennee@linaro.org>
`make installer` with a DLL directory was broken.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117190640.390359-1-sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123353.19796-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SystemTap's dtrace(1) prints the following warning when it encounters
long long arguments:
Warning: /usr/bin/dtrace:trace/trace-dtrace-hw_virtio.dtrace:76: syntax error near:
probe vhost_vdpa_dev_start
Warning: Proceeding as if --no-pyparsing was given.
Use the uint64_t and int64_t types, respectively. This works with all
host CPU 32- and 64-bit data models (ILP32, LP64, and LLP64) that QEMU
supports.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201020094043.159935-1-stefanha@redhat.com
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We switched to hardlinks in
a942f64cc4 ("scripts/oss-fuzz: use hardlinks instead of copying")
The motivation was to conserve space (50 fuzzers built with ASAN, can
weigh close to 9 GB).
Unfortunately, OSS-Fuzz (partially) treated the underlying copy of the
fuzzer as a standalone fuzzer. To attempt to fix, we tried:
f8b8f37463 ("scripts/oss-fuzz: rename bin/qemu-fuzz-i386")
This was also not a complete fix, because though OSS-Fuzz
ignores the renamed fuzzer, the underlying ClusterFuzz, doesn't:
https://storage.googleapis.com/clusterfuzz-builds/qemu/targets.list.addresshttps://oss-fuzz-build-logs.storage.googleapis.com/log-9bfb55f9-1c20-4aa6-a49c-ede12864eeb2.txt
(clusterfuzz still lists qemu-fuzz-i386.base as a fuzzer)
This change keeps the hard-links, but makes them all point to a file
with a qemu-fuzz-i386-target-.. name. If we have targets, A, B, C, the
result will be:
qemu-fuzz-i386-target-A (base file)
qemu-fuzz-i386-target-B -> qemu-fuzz-i386-target-A
qemu-fuzz-i386-target-C -> qemu-fuzz-i386-target-A
The result should be that every file that looks like a fuzzer to
OSS-Fuzz/ClusterFuzz, can run as a fuzzer (we don't have a separate base
copy). Unfortunately, there is not simple way to test this locally.
In the future, it might be worth it to link the majority of QEMU in as a
shared-object (see https://github.com/google/oss-fuzz/issues/4575 )
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201108171136.160607-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
After the transition to Meson, the build directory now have
subdirectories named "qemu-system-*.p", and device-crash-test
will try to execute them as if they were binaries. This results
in errors like:
PermissionError: [Errno 13] Permission denied: './qemu-system-or1k.p'
When generating the default list of binaries to test, check if
the path is actually a file and if it's executable.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201026125238.2752882-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
OSS-Fuzz changed the way it scans for fuzzers in $DEST_DIR. The new code
also scans subdirectories for fuzzers. This means that OSS-Fuzz is
considering bin/qemu-fuzz-i386 as an independent fuzzer (it is not - it
requires a --fuzz-target argument). This has led to coverage-build
failures and false crash reports. To work around this, we take advantage
of OSS-Fuzz' filename extension check - OSS-Fuzz will not run anything
that has an extension that is not ".exe":
https://github.com/google/oss-fuzz/blob/master/infra/utils.py#L115
Reported-by: OSS-Fuzz (Issue 26725)
Reported-by: OSS-Fuzz (Issue 26679)
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201101212245.185819-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kerneldoc script currently emits Sphinx markup for a macro with
arguments that uses the c:function directive. This is correct for
Sphinx versions earlier than Sphinx 3, where c:macro doesn't allow
documentation of macros with arguments and c:function is not picky
about the syntax of what it is passed. However, in Sphinx 3 the
c:macro directive was enhanced to support macros with arguments,
and c:function was made more picky about what syntax it accepted.
When kerneldoc is told that it needs to produce output for Sphinx
3 or later, make it emit c:function only for functions and c:macro
for macros with arguments. We assume that anything with a return
type is a function and anything without is a macro.
This fixes the Sphinx error:
/home/petmay01/linaro/qemu-from-laptop/qemu/docs/../include/qom/object.h:155:Error in declarator
If declarator-id with parameters (e.g., 'void f(int arg)'):
Invalid C declaration: Expected identifier in nested name. [error at 25]
DECLARE_INSTANCE_CHECKER ( InstanceType, OBJ_NAME, TYPENAME)
-------------------------^
If parenthesis in noptr-declarator (e.g., 'void (*f(int arg))(double)'):
Error in declarator or parameters
Invalid C declaration: Expecting "(" in parameters. [error at 39]
DECLARE_INSTANCE_CHECKER ( InstanceType, OBJ_NAME, TYPENAME)
---------------------------------------^
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-2-peter.maydell@linaro.org
vfio_zdev.h is used by s390x zPCI support to pass device-specific
CLP information between host and userspace.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- add some more individual contributors
- include SDL2 in centos images
- skip checkpatch check when no commits found
- use random port for gdb reverse debugging
- make gitlab use it's own mirrors to clone
- fix detection of make -nqp
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl+X7qsACgkQ+9DbCVqe
KkSpmAf/To0P/c/B6qMEvNfCiWtn/Nuypau8W60q/ZvE/J4IzFarwa5uc7COmyNR
xjvxdoeKp17ykFdwBzGhiKeO83SO8DUH1JmzA6STs4RH5VSFGYycuE0cQ9KugrpE
4yOruOdEgAn2+35oYalE9u6/EugdIVBZsjMS/ofsgR9ysYPuju4Q9by6DEK6ArW0
AmdwJzKAYw75v+D2wKNq9coSWvbqWClsV6j0gaKgn+OQYqWo25T/DzWdr1okCRET
TvB0HZLCDQHz9Friq5PtBtVsmNbZaL+CM9RRekFBGUFEvZE8i4VEDHFfzXsN3U0w
VA5yhlBJzl1/prBQe1qRbrZQL4x58w==
=Bnt1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-271020-1' into staging
Testing and gitdm updates
- add some more individual contributors
- include SDL2 in centos images
- skip checkpatch check when no commits found
- use random port for gdb reverse debugging
- make gitlab use it's own mirrors to clone
- fix detection of make -nqp
# gpg: Signature made Tue 27 Oct 2020 09:55:55 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-271020-1:
makefile: handle -n / -k / -q correctly
gitlab-ci: Clone from GitLab itself
tests/acceptance: pick a random gdb port for reverse debugging
scripts: fix error from checkpatch.pl when no commits are found
gitlab: skip checkpatch.pl checks if no commit delta on branch
tests/docker/dockerfiles/centos: Use SDL2 instead of SDL1
contrib/gitdm: Add more individual contributors
Adding ani's email as an individual contributor
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This script has not seen a patch that was specifically for this script
since it was moved to this location in 2013, and I doubt it is used. It
uses "man qmp" for its help message, which does not exist. It also
presumes there is a manual page for qmp-XXX, for each defined qmp
command XXX. I don't think that's true.
The format it expects arguments in is something like:
block-dirty-bitmap-add --node=foo --name=bar
and has no capacity to support nested JSON arguments, either.
Most developers use either qmp-shell or socat (or pasting JSON directly
into qmp stdio), so this duplication and additional alternate syntax is
not helpful.
Remove it. Leave a breadcrumb script just in case, to be removed next
release cycle.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20201019210430.1063390-1-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If the user selects pretty-printing (-p) the contents of any
dictionaries in the output are sorted by key.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20201013141414.18398-1-david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The error message was supposed to mention the input revision list start
point, not the branch flag.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201019143537.283094-3-berrange@redhat.com>
Message-Id: <20201021163136.27324-6-alex.bennee@linaro.org>
Commit a81df1b68b ("libqemuutil, qapi, trace: convert to meson")
removed it without explanation and it is useful to be able to run a
script without having to figure out which interpreter to use.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923103620.1980151-1-anthony.perard@citrix.com>
Update gensyscalls.sh not to generate an empty line at the end of the file
And then automatically update syscall_nr.h running scripts/gensyscalls.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930003033.554124-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generic-fuzz is not a standalone fuzzer - it requires some env variables
to be set. On oss-fuzz, we set these with some predefined
generic-fuzz-{...} targets, that are thin wrappers around generic-fuzz.
Do not make a link for the generic-fuzz from the oss-fuzz build, so
oss-fuzz does not treat it as a standalone fuzzer.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-18-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
[thuth: Reformatted one comment to stay within the 80 columns limit]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Prior to this, fuzzers in the output oss-fuzz directory were exactly
the same executable, with a different name to do argv[0]-based
fuzz-target selection. This is a waste of space, especially since these
binaries can weigh many MB.
Instead of copying, use hard links, to cut down on wasted space. We need
to place the primary copy of the executable into DEST_DIR, since this is
a separate file-system on oss-fuzz. We should not place it directly into
$DEST_DIR, since oss-fuzz will treat it as an independent fuzzer and try
to run it for fuzzing. Instead, we create a DEST_DIR/bin directory to
store the primary copy.
Suggested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-17-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Once we find a crash, we can convert it into a QTest trace. Usually this
trace will contain many operations that are unneeded to reproduce the
crash. This script tries to minimize the crashing trace, by removing
operations and trimming QTest bufwrite(write addr len data...) commands.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-12-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generic-fuzzer uses hooks to fulfill DMA requests just-in-time.
This means that if we try to use QTEST_LOG=1 to build a reproducer, the
DMA writes will be logged _after_ the in/out/read/write that triggered
the DMA read. To work work around this, the generic-fuzzer annotates
these just-in time DMA fulfilments with a tag that we can use to
discern them. This script simply iterates over a raw qtest
trace (including log messages, errors, timestamps etc), filters it and
re-orders it so that DMA fulfillments are placed directly _before_ the
qtest command that will cause the DMA access.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-11-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Apple's nm implementation includes empty lines in the output that are not
found in GNU binutils. This confuses scripts/undefsym.py, though it did
not confuse the scripts/undefsym.sh script that it replaced. To fix
this, ignore lines that do not have two fields.
Reported-by: Emmanuel Blot <eblot.ml@gmail.com>
Tested-by: Emmanuel Blot <eblot.ml@gmail.com>
Fixes: 604f3e4e90 ("meson: Convert undefsym.sh to undefsym.py", 2020-09-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For nested groups like:
{
[
pattern 1
pattern 2
]
pattern 3
}
the intended behaviour is that patterns 1 and 2 must not
overlap with each other; if the insn matches neither then
we fall through to pattern 3 as the next thing in the
outer overlapping group.
Currently we generate incorrect code for this situation,
because in the code path for a failed match inside the
inner non-overlapping group we generate a "return" statement,
which causes decode to stop entirely rather than continuing
to the next thing in the outer group.
Generate a "break" instead, so that decode flow behaves
as required for this nested group case.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-2-peter.maydell@linaro.org
Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.
The main advantages are, from smallest to largest:
- reducing the possible namespace pollution within the Makefile
- removal of a relatively large Python program
- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.
- tracking of command lines, which provides more accurate rebuilds
In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
-----BEGIN PGP SIGNATURE-----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=lCRK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-13' into staging
* qtest improvements (test for crash found with the fuzzer, increase
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
# gpg: Signature made Tue 13 Oct 2020 11:49:06 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-13: (23 commits)
scripts/ci/gitlab-pipeline-status: wait for pipeline creation
scripts/ci/gitlab-pipeline-status: use more descriptive exceptions
scripts/ci/gitlab-pipeline-status: handle keyboard interrupts
scripts/ci/gitlab-pipeline-status: refactor parser creation
scripts/ci/gitlab-pipeline-status: give early feedback on running pipelines
scripts/ci/gitlab-pipeline-status: improve message regarding timeout
scripts/ci/gitlab-pipeline-status: make branch name configurable
gitlab: assign python helper files to GitLab maintainers section
gitlab: add a CI job to validate the DCO sign off
gitlab: add a CI job for running checkpatch.pl
configure: fixes indent of $meson setup
docs/system/deprecated: Mark the 'moxie' CPU as deprecated
Remove superfluous .gitignore files
MAINTAINERS: Ignore bios-tables-test in the qtest section
Add a comment in bios-tables-test.c to clarify the reason behind approach
softmmu/vl: Be less verbose about missing KVM when running the qtests
tests/migration: Allow longer timeouts
qtest: add fuzz test case
Acceptance tests: show test report on GitLab CI
Acceptance tests: do not show canceled test logs on GitLab CI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When called in wait mode, this script will also wait for the pipeline
to be get to a "running" state. Because many more status may be seen
until a pipeline gets to "running", and those need to be handle too.
Reference: https://docs.gitlab.com/ee/api/pipelines.html#list-project-pipelines
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200904164258.240278-8-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For two very different error conditions.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200904164258.240278-7-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
So that exits based on user requests are handled more gracefully.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200904164258.240278-6-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Out of the main function.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200904164258.240278-5-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When waiting for a pipeline to run and finish, it's better to give
early feedback, and then sleep and wait, than the other wait around.
Specially for the first iteration, it's frustrating to see nothing
while the script is sleeping.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200904164258.240278-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The script has its own timeout, which is about how long the script
will wait (when called with --wait) for the pipeline to complete, and
not necessarily for the pipeline to complete.
Hopefully this new wording will be clearer.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200904164258.240278-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With the utility function `get_local_staging_branch_commit()`, the
name of the branch is hard coded (including in the function name).
For extensibility reasons, let's make that configurable.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200904164258.240278-2-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some objects accidentally inherit ObjectClass instead of Object.
They compile silently but may crash after downcasting.
In this patch, we introduce a coccinelle script to find broken
declarations and fix them manually with proper base type.
Signed-off-by: Sergey Nizovtsev <snizovtsev@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-37-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
And this fixes the pylint report for this file, so make sure we check
this in the future, too.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201009161558.107041-36-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is true by design, but not presently able to be expressed in the
type system. An assertion helps mypy understand our constraints.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-35-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
"John, if pylint told you to jump off a bridge, would you?"
Hey, if it looked like fun, I might.
Now that this file is clean, enable pylint checks on this file.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-34-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-33-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
'fp' and 'fd' are self-evident in context, add them to the list of OK
names.
_top and _bottom also need to stay standard methods because some users
override the method and need to use `self`. Tell pylint to shush.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-32-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make the file handling here just a tiny bit more idiomatic.
(I realize this is heavily subjective.)
Use exist_ok=True for os.makedirs and remove the exception,
use fdopen() to wrap the file descriptor in a File-like object,
and use a context manager for managing the file pointer.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201009161558.107041-31-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
_module_dirname doesn't use the 'what' argument, so remove it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-30-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
_is_user_module() returns thruth values. The next commit wants it to
return bool. Make it so.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201009161558.107041-27-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Shush an error and leave a hint for future cleanups when we're allowed
to use Python 3.7+.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-26-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
A note on typing of __init__: mypy requires init functions with no
parameters to document a return type of None to be considered fully
typed. In the case when there are input parameters, None may be omitted.
Since __init__ may never return any value, it is preferred to omit the
return annotation whenever possible.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-25-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mypy isn't a fan of rebinding a variable with a new data type.
It's easy enough to avoid.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201009161558.107041-22-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clarify them while we're here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-21-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
Note: __init__ does not need its return type annotated, as it is special.
https://mypy.readthedocs.io/en/stable/class_basics.html#annotating-init-methods
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-20-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix a minor typing issue, and then establish a mypy type-checking
baseline.
Like pylint, this should be run from the folder above:
> mypy --config-file=qapi/mypy.ini qapi/
This is designed and tested for mypy 0.770 or greater.
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-19-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Including it in common.py creates a circular import dependency; schema
relies on common, but common.build_params requires a type annotation
from schema. To type this properly, it needs to be moved outside the
cycle.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As docstrings, they'll show up in documentation and IDE help.
The docstring style being targeted is the Sphinx documentation
style. Sphinx uses an extension of ReST with "domains". We use the
(implicit) Python domain, which supports a number of custom "info
fields". Those info fields are documented here:
https://www.sphinx-doc.org/en/master/usage/restructuredtext/domains.html#info-field-lists
Primarily, we use `:param X: descr`, `:return[s]: descr`, and `:raise[s]
Z: when`. Everything else is the Sphinx dialect of ReST.
(No, nothing checks or enforces this style that I am aware of. Sphinx
either chokes or succeeds, but does not enforce a standard of what is
otherwise inside the docstring. Pycharm does highlight when your param
fields are not aligned with the actual fields present. It does not
highlight missing return or exception statements. There is no existing
style guide I am aware of that covers a standard for a minimally
acceptable docstring. I am debating writing one.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
Note that build_params() cannot be fully annotated due to import
dependency issues. The commit after next will take care of it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove qapi/common.py from the pylintrc ignore list.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201009161558.107041-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
