QEMU includes some models of old Arm machine types which are
a bit problematic for us because:
* they're written in a very old way that uses numerous APIs that we
would like to get away from (eg they don't use qdev, they use
qemu_system_reset_request(), they use vmstate_register(), etc)
* they've been that way for a decade plus and nobody particularly has
stepped up to try to modernise the code (beyond some occasional
work here and there)
* we often don't have test cases for them, which means that if we
do try to do the necessary refactoring work on them we have no
idea if they even still work at all afterwards
All these machine types are also of hardware that has largely passed
away into history and where I would not be surprised to find that
e.g. the Linux kernel support was never tested on real hardware
any more.
After some consultation with the Linux kernel developers, we
are going to deprecate:
All PXA2xx machines:
akita Sharp SL-C1000 (Akita) PDA (PXA270)
borzoi Sharp SL-C3100 (Borzoi) PDA (PXA270)
connex Gumstix Connex (PXA255)
mainstone Mainstone II (PXA27x)
spitz Sharp SL-C3000 (Spitz) PDA (PXA270)
terrier Sharp SL-C3200 (Terrier) PDA (PXA270)
tosa Sharp SL-6000 (Tosa) PDA (PXA255)
verdex Gumstix Verdex Pro XL6P COMs (PXA270)
z2 Zipit Z2 (PXA27x)
All OMAP2 machines:
n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
One of the OMAP1 machines:
cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
Rationale:
* for QEMU dropping individual machines is much less beneficial
than if we can drop support for an entire SoC
* the OMAP2 QEMU code in particular is large, old and unmaintained,
and none of the OMAP2 kernel maintainers said they were using
QEMU in any of their testing/development
* although there is a setup that is booting test kernels on some
of the PXA2xx machines, nobody seemed to be using them as part
of their active kernel development and my impression from the
email thread is that PXA is the closest of all these SoC families
to being dropped from the kernel soon
* nobody said they were using cheetah, so it's entirely
untested and quite probably broken
* on the other hand the OMAP1 sx1 model does seem to be being
used as part of kernel development, and there was interest
in keeping collie around
In particular, the mainstone, tosa and z2 machine types have
already been dropped from Linux.
Mark all these machine types as deprecated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240308171621.3749894-1-peter.maydell@linaro.org
Add reset support for mcf5208.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240309093459.984565-1-angelo@kernel-space.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In machine_parse_smp_config(), the number of total CPUs is calculated
by:
drawers * books * sockets * dies * clusters * cores * threads
To avoid missing the future new topology level, use a local variable to
cache the calculation result so that total CPUs are only calculated
once.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308160148.3130837-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".
This is meaningless and confusing, so that the support for this kind of
configurations is marked deprecated since 9.0. And report warning
message for such case like:
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported clusters parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported books parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported drawers parameter mustn't be specified as 1
Users have to ensure that all the topology members described with -smp
are supported by the target machine.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The "parameter=0" SMP configurations have been marked as deprecated
since v6.2.
For these cases, -smp currently returns the warning and adjusts the
zeroed parameters to 1 by default.
Remove the above compatibility logic in v9.0, and return error directly
if any -smp parameter is set as 0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240308160148.3130837-2-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Even if the error is set, the build is not aborted when the ncpus value
is wrong, the return is missing.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 6bf1478543 ("hw/intc/grlib_irqmp: add ncpus property")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308152719.591232-1-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
MacOS X uses multiple techniques for calibrating timers depending upon the detected
hardware. One of these calibration routines compares the change in the timebase
against the KeyLargo timer and uses this to recalculate the clock frequency,
timebase frequency and bus frequency if the calibration exceeds certain limits.
This recalibration occurs despite the correct values being passed via the device
tree, and is likely due to buggy firmware on some hardware.
The timebase frequency of 100MHz was set way back in 2005 by commit fa296b0fb4
("PIC fix - changed back TB frequency to 100 MHz") and with this value on a
mac99,via=pmu machine the OSX 10.2 timer calibration incorrectly calculates the
bus frequency as 400MHz instead of 100MHz. The most noticeable side-effect is
the UI appears sluggish and not very responsive for normal use.
Change the timebase frequency from 100MHz to 25MHz which matches that of a real
G4 AGP machine (the closest match to QEMU's mac99 machine) and allows OSX 10.2
to correctly detect all of the clock frequency, timebase frequency and bus
frequency.
Tested on various MacOS images from OS 9.2 through to OSX 10.4, along with Linux
and NetBSD and I was unable to find any regressions from this change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240304073548.2098806-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Introduce a new enum type property allowing to set an
IOMMU granule. Values are 4k, 8k, 16k, 64k and host.
This latter indicates the vIOMMU granule will match
the host page size.
A subsequent patch will add such a property to the
virtio-iommu device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240227165730.14099-2-eric.auger@redhat.com>
deliver_bitmask is allocated on the heap in apic_deliver(), but there
are many paths in the function that return before the corresponding
g_free() is reached. Fix this by switching to g_autofree and, while at
it, also switch to g_new. Do the same in apic_deliver_irq() as well
for consistency.
Fixes: b5ee0468e9 ("apic: add support for x2APIC mode", 2024-02-14)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240304224133.267640-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The "isapc" machine only provides an ISA bus, not a PCI one,
and doesn't instanciate any i440FX south bridge.
Its machine class defines PCMachineClass::pci_enabled = false,
and pc_init1() only uses the pci_type argument when pci_enabled
is true. Since for this machine the argument is not used,
passing NULL makes more sense.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240301185936.95175-5-philmd@linaro.org>
All callers use host_type=TYPE_I440FX_PCI_HOST_BRIDGE.
Directly use this definition within pc_init1().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-4-philmd@linaro.org>
NotifyVmexitOption_str() is QAPI-generated in
"qapi/qapi-types-run-state.h", which "sysemu/runstate.h"
already includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-3-philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The remote_object_set_fd() passes @errp to error_prepend(), and as a
PropertyInfo.set method, its @errp is so widely sourced that it is
necessary to protect it with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The xen_netdev_connect() passes @errp to error_prepend(), and its @errp
parameter is from xen_device_frontend_changed().
Though its @errp points to @local_err of xen_device_frontend_changed(),
to follow the requirement of @errp, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The xen_console_connect() passes @errp to error_prepend() without
ERRP_GUARD().
There're 2 places will call xen_console_connect():
- xen_console_realize(): the @errp is from DeviceClass.realize()'s
parameter.
- xen_console_frontend_changed(): the @errp points its caller's
@local_err.
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of xen_console_connect().
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-ID: <20240228163723.1775791-15-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In order to build this file once for all targets, replace:
TARGET_PAGE_BITS -> qemu_target_page_bits()
TARGET_PAGE_SIZE -> qemu_target_page_size()
TARGET_PAGE_MASK -> -qemu_target_page_size()
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-4-philmd@linaro.org>
We are going to replace TARGET_PAGE_MASK by a
runtime variable. In order to reduce code duplication,
propagate TARGET_PAGE_MASK to get_physmapping() and
xen_phys_offset_to_gaddr().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-3-philmd@linaro.org>
Use TARGET_PAGE_SIZE to calculate TARGET_PAGE_ALIGN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-2-philmd@linaro.org>
xen-hvm.c calls xc_set_hvm_param() from <xenctrl.h>,
so better compile it with Xen CPPFLAGS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-19-philmd@linaro.org>
"hw/xen/xen_pt.h" requires "hw/xen/xen_native.h" which is target
specific. It also declares IGD methods, which are not target
specific.
Target-agnostic code can use IGD methods. To allow that, extract
these methos into a new "hw/xen/xen_igd.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-18-philmd@linaro.org>
Commit eaab4d60d3 ("Introduce Xen PCI Passthrough, qdevice")
introduced both xen_pt.[ch], but only added the license to
xen_pt.c. Use the same license for xen_pt.h.
Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-17-philmd@linaro.org>
Instead of the target-specific TARGET_PAGE_BITS definition,
use qemu_target_page_bits() which is target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-15-philmd@linaro.org>
To avoid a potential global variable shadow in
hw/i386/pc_piix.c::pc_init1(), rename Xen's
"ram_memory" as "xen_memory".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-11-philmd@linaro.org>
Similarly to the restriction in hw/pci/msix.c (see commit
e1e4bf2252 "msix: fix msix_vector_masked"), restrict the
xen_is_pirq_msi() call in msi_is_masked() to Xen.
No functional change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-7-philmd@linaro.org>
vAPIC isn't KVM specific, so having its name prefixed 'kvm'
is misleading. Rename it simply 'vapic'. Rename the single
function prefixed 'kvm'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230905145159.7898-1-philmd@linaro.org>
When setting GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_58 or higher,
glib adds type safety checks to the g_steal_pointer() macro. This
triggers errors in the ct3_build_cdat_entries_for_mr() function which
uses the g_steal_pointer() for type-casting from one pointer type to
the other (which also looks quite weird since the local pointers have
all been declared with g_autofree though they are never freed here).
Fix it by using a proper typecast instead. For making this possible, we
have to remove the QEMU_PACKED attribute from some structs since GCC
otherwise complains that the source and destination pointer might
have different alignment restrictions. Removing the QEMU_PACKED should
be fine here since the structs are already naturally aligned. Anyway,
add some QEMU_BUILD_BUG_ON() statements to make sure that we've got
the right sizes (without padding in the structs).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When setting GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_58 or higher,
glib adds type safety checks to the g_steal_pointer() macro. This
triggers errors in the build_cdat_table() function which uses the
g_steal_pointer() for type-casting from one pointer type to the other
(which also looks quite weird since the local pointers have all been
declared with g_autofree though they are never freed here). Let's fix
it by using a proper typecast instead. For making this possible, we
have to remove the QEMU_PACKED attribute from some structs since GCC
otherwise complains that the source and destination pointer might
have different alignment restrictions. Removing the QEMU_PACKED should
be fine here since the structs are already naturally aligned. Anyway,
add some QEMU_BUILD_BUG_ON() statements to make sure that we've got
the right sizes (without padding in the structs).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When setting GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_58 or higher
(which we'll certainly do in the not too distant future), glib adds
type safety checks to the g_steal_pointer() macro. This trigger an
error in the ct3_load_cdat() function: The local char *buf variable is
assigned to uint8_t *buf in CDATObject, i.e. a pointer of a different
type. Change the local variable to the same type as buf in CDATObject
to avoid the error.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Not used outside C module.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This pull request contains two small patches to hv-balloon:
the first one replacing alloca() usage with g_malloc0() + g_autofree
and the second one adding additional declaration of a protocol message
struct with an optional field explicitly defined to avoid a Coverity
warning.
Also included is a VMBus patch to print a warning when it is enabled
without the recommended set of Hyper-V features (enlightenments) since
some Windows versions crash at boot in this case.
-----BEGIN PGP SIGNATURE-----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=kVny
-----END PGP SIGNATURE-----
Merge tag 'pull-hv-balloon-20240308' of https://github.com/maciejsszmigiero/qemu into staging
Hyper-V Dynamic Memory and VMBus misc small patches
This pull request contains two small patches to hv-balloon:
the first one replacing alloca() usage with g_malloc0() + g_autofree
and the second one adding additional declaration of a protocol message
struct with an optional field explicitly defined to avoid a Coverity
warning.
Also included is a VMBus patch to print a warning when it is enabled
without the recommended set of Hyper-V features (enlightenments) since
some Windows versions crash at boot in this case.
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmXrQeMACgkQUrHW6VHQ
# zgcvWwv9GUCDnidnDka8WGF2wgBEaPPdC2JXcqRFFLADISBAn/3fhsOERO6FwYuN
# pouhVEJnHpp9ueNAx+et51ySRzGCaL+VdOGGeReQllIOZGsnOnB8JfM58UE4lX4Z
# prCr72bxFsunxRqlqxssejrc8fBhgEQRPo5lQabl73rxftpXkNTHY0CGTwlvnaY1
# CzEBTBuowzkZJbQYDL8Qim2HrYqrSnOaend6bbrj9P6P+UFw9wLJU5tkfYCiHUjg
# Ux2Fjjx+5+qD9yE7khtxSHqjwWYkR7xA9di1yv4Znqg18gzdbuqnlrKR7F0v98yh
# sWFy+fyfVRDg+G2yh2F+vAUjmAJUrfw5+GL3uZTWIevoQUoSHBQfgUEJrlIKvykZ
# WP1XuAZRH3m2akDOXOWZVcDhkb3zPKtPJYZ2WncBZk+DLCs/vg94Taq0FcZefBTn
# 6qsFjs2lHz96uOSzgqICfU34ghcxfU5xgzmvKxKAiriOItmRMHgIYOXLHRfaIJhV
# MT/9OMuW
# =kVny
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 08 Mar 2024 16:50:43 GMT
# gpg: using RSA key E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'pull-hv-balloon-20240308' of https://github.com/maciejsszmigiero/qemu:
vmbus: Print a warning when enabled without the recommended set of features
hv-balloon: define dm_hot_add_with_region to avoid Coverity warning
hv-balloon: avoid alloca() usage
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add new "select" and "imply" directives if needed. The resulting
config-devices.mak files are the same as before.
Builds without default devices will become much smaller
than before, and qtests fail (as expected, though suboptimal)
for mips64-softmmu because most tests do not use -nodefaults,
so remove it from build-without-defaults
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
deliver_bitmask is allocated on the heap in apic_deliver(), but there
are many paths in the function that return before the corresponding
g_free() is reached. Fix this by switching to g_autofree and, while at
it, also switch to g_new. Do the same in apic_deliver_irq() as well
for consistency.
Fixes: b5ee0468e9 ("apic: add support for x2APIC mode", 2024-02-14)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Netbsd isn't happy with qemu lsi53c895a emulation:
cd0(esiop0:0:2:0): command with tag id 0 reset
esiop0: autoconfiguration error: phase mismatch without command
esiop0: autoconfiguration error: unhandled scsi interrupt, sist=0x80 sstat1=0x0 DSA=0x23a64b1 DSP=0x50
This is because lsi_bad_phase() triggers a phase mismatch, which
stops SCRIPT processing. However, after returning to
lsi_command_complete(), SCRIPT is restarted with lsi_resume_script().
Fix this by adding a return value to lsi_bad_phase(), and only resume
script processing when lsi_bad_phase() didn't trigger a host interrupt.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Helge Deller <deller@gmx.de>
Message-ID: <20240302214453.2071388-1-svens@stackframe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HP-UX 10.20 seems to make the lsi53c895a spinning on a memory location
under certain circumstances. As the SCSI controller and CPU are not
running at the same time this loop will never finish. After some
time, the check loop interrupts with a unexpected device disconnect.
This works, but is slow because the kernel resets the scsi controller.
Instead of signaling UDC, start a timer and exit the loop. Until the
timer fires, the CPU can process instructions which might changes the
memory location.
The limit of instructions is also reduced because scripts running on
the SCSI processor are usually very short. This keeps the time until
the loop is exit short.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240229204407.1699260-1-svens@stackframe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some Windows versions crash at boot or fail to enable the VMBus device if
they don't see the expected set of Hyper-V features (enlightenments).
Since this provides poor user experience let's warn user if the VMBus
device is enabled without the recommended set of Hyper-V features.
The recommended set is the minimum set of Hyper-V features required to make
the VMBus device work properly in Windows Server versions 2016, 2019 and
2022.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Since the presence of a hot add memory region is optional in hot add
request message it wasn't part of this message declaration
(struct dm_hot_add).
Instead, the code allocated such enlarged message by simply adding the
necessary size for this extra field to the size of basic hot add message
struct.
However, Coverity considers accessing this extra member to be
an out-of-bounds access, even thought the memory is actually there.
Fix this by adding an extended variant of this message that explicitly has
an additional union dm_mem_page_range at its end.
CID: #1523903
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
alloca() is frowned upon, replace it with g_malloc0() + g_autofree.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
MCFG segments should point to PCI configuration range, not BAR MMIO.
Signed-off-by: Ilya Chugin <danger_mail@list.ru>
Fixes: 55ecd83b36 ("hw/riscv/virt-acpi-build.c: Add IO controllers and devices")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Message-ID: <180d236d-c8e4-411a-b4d2-632eb82092fa@list.ru>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The reads to in_clrip[x] registers return rectified input values of the
interrupt sources.
A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the RISC-V
AIA specification as:
"rectified input value = (incoming wire value) XOR (source is inverted)"
Update the riscv_aplic_read_input_word() implementation to match the above.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The writes to setipnum_le register in APLIC MSI-mode have special
consideration for level-triggered interrupts as-per section "4.9.2
Special consideration for level-sensitive interrupt sources" of the
RISC-V AIA specification.
Particularly, the below text from the RISC-V specification defines
the behaviour of writes to setipnum_le for level-triggered interrupts:
"A second option is for the interrupt service routine to write the
APLIC’s source identity number for the interrupt to the domain’s
setipnum register just before exiting. This will cause the interrupt’s
pending bit to be set to one again if the source is still asserting
an interrupt, but not if the source is not asserting an interrupt."
Fix setipnum_le write emulation for APLIC MSI-mode by implementing
the above behaviour in riscv_aplic_set_pending() function.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'virt' machine makes assumptions on the Advanced Core-Local
Interruptor, or aclint, based on 'tcg_enabled()' conditionals. This
will impact MSI related tests support when adding a RISC-V 'virt' libqos
machine. The accelerator used in that case, 'qtest', isn't being
accounted for and we'll error out if we try to enable aclint.
Create a new virt_aclint_allowed() helper to gate the aclint code
considering both TCG and 'qtest' accelerators. The error message is
left untouched, mentioning TCG only, because we don't expect the
regular user to be aware of 'qtest'.
We want to add 'qtest' support for aclint only, leaving the TCG specific
bits out of it. This is done by changing the current format we use
today:
if (tcg_enabled()) {
if (s->have_aclint) { - aclint logic - }
else { - non-aclint, TCG logic - }
}
into:
if (virt_aclint_allowed() && s->have_aclint) {
- aclint logic -
} else if (tcg_enabled()) {
- non-aclint, TCG logic -
}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We want to add a RISC-V 'virt' libqos machine to increase our test
coverage. Some of the tests will try to plug a virtio-iommu-pci
device into the board and do some tests with it.
Enable virtio-iommu-pci in the 'virt' machine.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Hotplugged FDT nodes will attempt to write this node that, at this
moment, is being created only in create_fdt_pcie() during
finalize_fdt().
Create it earlier.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Enable ACPI NUMA support by adding the following 2 ACPI tables:
SRAT: provides the association for memory/Harts and Proximity Domains
SLIT: provides the relative distance between Proximity Domains
The SRAT RINTC Affinity Structure definition[1] was based on the recently
approved ACPI CodeFirst ECR[2].
[1] https://github.com/riscv-non-isa/riscv-acpi/issues/25
[2] https://mantis.uefi.org/mantis/view.php?id=2433
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240129094200.3581037-1-haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the initrd is placed at 128MB, which overlaps with the kernel
when it is large (for example syzbot kernels are). From the kernel side,
there is no reason we could not push the initrd further away in memory
to accommodate large kernels, so move the initrd at 512MB when possible.
The ideal solution would have been to place the initrd based on the
kernel size but we actually can't since the bss size is not known when
the image is loaded by load_image_targphys_as() and the initrd would
then overlap with this section.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240206154042.514698-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
