Provide an introduction to the main components of a CXL system,
with detailed explanation of memory interleaving, example command
lines and kernel configuration.
This was a challenging document to write due to the need to extract
only that subset of CXL information which is relevant to either
users of QEMU emulation of CXL or to those interested in the
implementation. Much of CXL is concerned with specific elements of
the protocol, management of memory pooling etc which is simply
not relevant to what is currently planned for CXL emulation
in QEMU. All comments welcome
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-43-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the NBD spec, a server that advertises
NBD_FLAG_CAN_MULTI_CONN promises that multiple client connections will
not see any cache inconsistencies: when properly separated by a single
flush, actions performed by one client will be visible to another
client, regardless of which client did the flush.
We always satisfy these conditions in qemu - even when we support
multiple clients, ALL clients go through a single point of reference
into the block layer, with no local caching. The effect of one client
is instantly visible to the next client. Even if our backend were a
network device, we argue that any multi-path caching effects that
would cause inconsistencies in back-to-back actions not seeing the
effect of previous actions would be a bug in that backend, and not the
fault of caching in qemu. As such, it is safe to unconditionally
advertise CAN_MULTI_CONN for any qemu NBD server situation that
supports parallel clients.
Note, however, that we don't want to advertise CAN_MULTI_CONN when we
know that a second client cannot connect (for historical reasons,
qemu-nbd defaults to a single connection while nbd-server-add and QMP
commands default to unlimited connections; but we already have
existing means to let either style of NBD server creation alter those
defaults). This is visible by no longer advertising MULTI_CONN for
'qemu-nbd -r' without -e, as in the iotest nbd-qemu-allocation.
The harder part of this patch is setting up an iotest to demonstrate
behavior of multiple NBD clients to a single server. It might be
possible with parallel qemu-io processes, but I found it easier to do
in python with the help of libnbd, and help from Nir and Vladimir in
writing the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Suggested-by: Nir Soffer <nsoffer@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220512004924.417153-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Enable the n1 for virt and sbsa board use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable the a76 for virt and sbsa board use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns not merging memory access, which TCG does
not implement. Thus we can trivially enable this feature.
Add a comment to handle_hint for the DGH instruction, but no code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns cache speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no branch prediction in TCG, therefore there is no
need to actually include the context number into the predictor.
Therefore all we need to do is add the state for SCXTNUM_ELx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns branch speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is AArch64 only, and applies to physical SErrors,
which QEMU does not implement, thus the feature is a nop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns changes to the External Debug interface,
with Secure and Non-secure access to the debug registers, and all
of it is outside the scope of QEMU. Indicating support for this
is mandatory with FEAT_SEL2, which we do implement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only portion of FEAT_Debugv8p2 that is relevant to QEMU
is CONTEXTIDR_EL2, which is also conditionally implemented
with FEAT_VHE. The rest of the debug extension concerns the
External debug interface, which is outside the scope of QEMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
STEXI and ETEXI is not used anymore since we switched to Sphinx.
Replace them in the example with SRST and ERST, too.
Message-Id: <20220506150146.564244-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The hash is now generated with a Python script.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The specification for VHOST_USER_ADD/REM_MEM_REG messages is unclear
in several points, which has led to clients having incompatible
implementations. This changes the specification to be more explicit
about them:
* VHOST_USER_ADD_MEM_REG is not specified as receiving a file
descriptor, though it obviously does need to do so. All
implementations agree on this one, fix the specification.
* VHOST_USER_REM_MEM_REG is not specified as receiving a file
descriptor either, and it also has no reason to do so. rust-vmm does
not send file descriptors for removing a memory region (in agreement
with the specification), libvhost-user and QEMU do (which is a bug),
though libvhost-user doesn't actually make any use of it.
Change the specification so that for compatibility QEMU's behaviour
becomes legal, even if discouraged, but rust-vmm's behaviour becomes
the explicitly recommended mode of operation.
* VHOST_USER_ADD_MEM_REG doesn't have a documented return value, which
is the desired behaviour in the non-postcopy case. It also implemented
like this in QEMU and rust-vmm, though libvhost-user is buggy and
sometimes sends an unexpected reply. This will be fixed in a separate
patch.
However, in postcopy mode it does reply like VHOST_USER_SET_MEM_TABLE.
This behaviour is shared between libvhost-user and QEMU; rust-vmm
doesn't implement postcopy mode yet. Mention it explicitly in the
spec.
* The specification doesn't mention how VHOST_USER_REM_MEM_REG
identifies the memory region to be removed. Change it to describe the
existing behaviour of libvhost-user (guest address, user address and
size must match).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220407133657.155281-2-kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simple grep for the .bdrv_co_check callback presence gives the following
list of block drivers
* QED
* VDI
* VHDX
* VMDK
* Parallels
which have this callback. The presense of the callback means that
consistency check is supported.
The patch updates documentation accordingly.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220407083932.531965-1-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit a2ce7dbd91 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Imply the TPM sysbus devices. This allows users to add TPM devices to
the RISC-V virt board.
This was tested by first creating an emulated TPM device:
swtpm socket --tpm2 -t -d --tpmstate dir=/tmp/tpm \
--ctrl type=unixio,path=swtpm-sock
Then launching QEMU with:
-chardev socket,id=chrtpm,path=swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-device,tpmdev=tpm0
The TPM device can be seen in the memory tree and the generated device
tree.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/942
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-7-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* refactor to use tcg_constant where appropriate
* Advertise support for FEAT_TTL and FEAT_BBM level 2
* smmuv3: Cache event fault record
* smmuv3: Add space in guest error message
* smmuv3: Advertise support for SMMUv3.2-BBML2
-----BEGIN PGP SIGNATURE-----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=IPEn
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220428' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* refactor to use tcg_constant where appropriate
* Advertise support for FEAT_TTL and FEAT_BBM level 2
* smmuv3: Cache event fault record
* smmuv3: Add space in guest error message
* smmuv3: Advertise support for SMMUv3.2-BBML2
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJqpu4ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pOQD/9G190+ntJm4Vndz0I6bCDP
# svDrWwsioOJ4q5Pah6517JACkwN5sx0adMGyAeRC3Kcbz5B2141vv9hJOnJmLB1D
# l6KbH8XZaftC0B8fXsPkaH6XEdBHGz6YbOZaLOTwmFqF9d18OFW4d8+CAvfldZRc
# +DYeolEhoL9eLTS16BlXPxb0LajQHhbN1Xdu3t8CGh31C52ZrG4h8cus6YMEDjfA
# rfBthh/2QvVFmDedIfX4QrlImCTs+bTaSkhUBmX6qakWII0QykItgQTEZ8IHEr8/
# QmG+xlkP1MmffyHU3F4inEVXpjCSzula4ycZpNVGsrTHYxLBzsTSD+EzicLHMZSt
# 64tQhLxPjAzC1MEHp7bJHyQXon7REWd6u1jPRlMWTGpZqbMMchBPjFrsxK3YPdvi
# a/8KIulXuX+GjzbOIHnpttIy+U0UrjTEyxjpk+Ay2iZ+U6+hA3i2ni++dzq9dYb6
# IiCl+o29r/7fNaWpG3b38kn9vpxjwAAw+qfwwSqyM+8/KMirgJ8rpEmUPei/h7fy
# vqpNlVxd1+Tzb3ljCXNRriZ05xo5I9LIb+dLAig1orENS7w3SzW/GnM+S7raOwQb
# u9mxNmbQJ1MhkjNC/6wzniBre6EBs31X2GIWeuiWe/js2YFPQC06b1WwIc/bYNUv
# anbECOS34mtxbExFfdlxUQ==
# =IPEn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 28 Apr 2022 07:38:38 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220428' of https://git.linaro.org/people/pmaydell/qemu-arm: (54 commits)
hw/arm/smmuv3: Advertise support for SMMUv3.2-BBML2
target/arm: Advertise support for FEAT_BBM level 2
target/arm: Advertise support for FEAT_TTL
hw/arm/smmuv3: Add space in guest error message
hw/arm/smmuv3: Cache event fault record
target/arm: Use field names for accessing DBGWCRn
target/arm: Disable cryptographic instructions when neon is disabled
target/arm: Use tcg_constant for vector descriptor
target/arm: Use tcg_constant for do_brk{2,3}
target/arm: Use tcg_constant for predicate descriptors
target/arm: Use tcg_constant in do_zzi_{sat, ool}, do_fp_imm
target/arm: Use tcg_constant in SUBR
target/arm: Use tcg_constant in LD1, ST1
target/arm: Use tcg_constant in WHILE
target/arm: Use tcg_constant in do_clast_scalar
target/arm: Use tcg_constant in {incr, wrap}_last_active
target/arm: Use tcg_constant in FCPY, CPY
target/arm: Use tcg_constant in SINCDEC, INCDEC
target/arm: Use tcg_constant for trans_INDEX_*
target/arm: Use tcg_constant in trans_CSEL
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The description in the Arm ARM of the requirements of FEAT_BBM is
admirably clear on the guarantees it provides software, but slightly
more obscure on what that means for implementations. The description
of the equivalent SMMU feature in the SMMU specification (IHI0070D.b
section 3.21.1) is perhaps a bit more detailed and includes some
example valid implementation choices. (The SMMU version of this
feature is slightly tighter than the CPU version: the CPU is permitted
to raise TLB Conflict aborts in some situations that the SMMU may
not. This doesn't matter for QEMU because we don't want to do TLB
Conflict aborts anyway.)
The informal summary of FEAT_BBM is that it is about permitting an OS
to switch a range of memory between "covered by a huge page" and
"covered by a sequence of normal pages" without having to engage in
the 'break-before-make' dance that has traditionally been
necessary. The 'break-before-make' sequence is:
* replace the old translation table entry with an invalid entry
* execute a DSB insn
* execute a broadcast TLB invalidate insn
* execute a DSB insn
* write the new translation table entry
* execute a DSB insn
The point of this is to ensure that no TLB can simultaneously contain
TLB entries for the old and the new entry, which would traditionally
be UNPREDICTABLE (allowing the CPU to generate a TLB Conflict fault
or to use a random mishmash of values from the old and the new
entry). FEAT_BBM level 2 says "for the specific case where the only
thing that changed is the size of the block, the TLB is guaranteed
not to do weird things even if there are multiple entries for an
address", which means that software can now do:
* replace old translation table entry with new entry
* DSB
* broadcast TLB invalidate
* DSB
As the SMMU spec notes, valid ways to do this include:
* if there are multiple entries in the TLB for an address,
choose one of them and use it, ignoring the others
* if there are multiple entries in the TLB for an address,
throw them all out and do a page table walk to get a new one
QEMU's page table walk implementation for Arm CPUs already meets the
requirements for FEAT_BBM level 2. When we cache an entry in our TCG
TLB, we do so only for the specific (non-huge) page that the address
is in, and there is no way for the TLB data structure to ever have
more than one TLB entry for that page. (We handle huge pages only in
that we track what part of the address space is covered by huge pages
so that a TLB invalidate operation for an address in a huge page
results in an invalidation of the whole TLB.) We ignore the Contiguous
bit in page table entries, so we don't have to do anything for the
parts of FEAT_BBM that deal with changis to the Contiguous bit.
FEAT_BBM level 2 also requires that the nT bit in block descriptors
must be ignored; since commit 39a1fd2528 we do this.
It's therefore safe for QEMU to advertise FEAT_BBM level 2 by
setting ID_AA64MMFR2_EL1.BBM to 2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220426160422.2353158-3-peter.maydell@linaro.org
The Arm FEAT_TTL architectural feature allows the guest to provide an
optional hint in an AArch64 TLB invalidate operation about which
translation table level holds the leaf entry for the address being
invalidated. QEMU's TLB implementation doesn't need that hint, and
we correctly ignore the (previously RES0) bits in TLB invalidate
operation values that are now used for the TTL field. So we can
simply advertise support for it in our 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220426160422.2353158-2-peter.maydell@linaro.org
Like -set and -readconfig, it would not really be too hard to
extend -writeconfig to parsing mechanisms other than QemuOpts.
However, the uses of -writeconfig are substantially more
limited, as it is generally easier to write the configuration
by hand in the first place. In addition, -writeconfig does
not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping.
Just remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414145721.326866-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add possibility to change addresses where VNC server listens for new
connections. Prior to 6.0 this functionality was available through
'change' qmp command which was deleted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-3-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Users requiring FIPS support must build QEMU with either the libgcrypt
or gnutls libraries as the crytography backend.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The official spelling does not use camel case.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220422083403.1082924-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for the TCG GICv4 to the virt board. For the board,
the GICv4 is very similar to the GICv3, with the only difference
being the size of the redistributor frame. The changes here are thus:
* calculating virt_redist_capacity correctly for GICv4
* changing various places which were "if GICv3" to be "if not GICv2"
* the commandline option handling
Note that using GICv4 reduces the maximum possible number of CPUs on
the virt board from 512 to 317, because we can now only fit half as
many redistributors into the redistributor regions we have defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-42-peter.maydell@linaro.org
It's not the way it is usually written (see https://clang.llvm.org/).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-17-marcandre.lureau@redhat.com>
Describe that the gic-version influences the maximum number of CPUs.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Message-id: 20220413231456.35811-1-heinrich.schuchardt@canonical.com
[PMM: minor punctuation tweaks]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtiofsd has introduced killpriv_v2/no_killpriv_v2 for a while. Add
description of it to docs/helper.
Signed-off-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Message-Id: <20220421095151.2231099-1-liuyd.fnst@fujitsu.com>
[Small documentation fixes: s/as client supports/as the client supports/
and s/. /. /.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 4e99f4b12c dropped simple unions and updated most
documentation accordingly, but in one case we still claim that
there are "two flavors of unions".
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Message-Id: <20220420153408.243584-2-abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- make -M virt test exercise -cpu max
- document how binfmt_misc docker works
- clean-up the devel TOC generation
- clean-up check-tcg cross-compile behaviour
- fix byte swap error in xmm gdbstub access
- add float_convd test with reference files
- more reference files for float_convs
- more cleanly handle gdb crashing during check-tcg
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
=8q12
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu into staging
Testing, docs and gdbstub updates:
- make -M virt test exercise -cpu max
- document how binfmt_misc docker works
- clean-up the devel TOC generation
- clean-up check-tcg cross-compile behaviour
- fix byte swap error in xmm gdbstub access
- add float_convd test with reference files
- more reference files for float_convs
- more cleanly handle gdb crashing during check-tcg
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
# KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
# ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
# 4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
# wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
# mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
# QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
# =8q12
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 08:08:59 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu: (25 commits)
tests/guest-debug: better handle gdb crashes
target/i386: fix byte swap issue with XMM register access
tests/tcg: add missing reference files for float_convs
tests/tcg: add float_convd test
tests/tcg: remove duplicate sha512-sse case
tests/tcg: fix non-static build
tests/docker: remove SKIP_DOCKER_BUILD
tests/tcg: isolate from QEMU's config-host.mak
tests/tcg: invoke Makefile.target directly from QEMU's makefile
tests/tcg: list test targets in Makefile.prereqs
tests/tcg: prepare Makefile.prereqs at configure time
tests/tcg: remove CONFIG_USER_ONLY from config-target.mak
tests/tcg: remove CONFIG_LINUX_USER from config-target.mak
tests/tcg: add compiler test variables when using containers
tests/docker: do not duplicate rules for hexagon-cross
tests/docker: simplify docker-TEST@IMAGE targets
tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES)
tests/docker: inline variable definitions or move close to use
tests/docker: remove unnecessary default definitions
tests/docker: remove dead variable
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This was confusing and in the case of qtest was hiding the details of
the qgraph sub-document in the qtest pages.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-4-alex.bennee@linaro.org>
We document some of this on the wiki but lets move it into our
official developer notes documentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-3-alex.bennee@linaro.org>
SynDbg commands can come from two different flows:
1. Hypercalls, in this mode the data being sent is fully
encapsulated network packets.
2. SynDbg specific MSRs, in this mode only the data that needs to be
transfered is passed.
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220216102500.692781-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a section explaining how the Guest Owner should calculate the
expected guest launch measurement for SEV and SEV-ES.
Also update the name and links to the SEV API Spec document.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220217110059.2320497-1-dovmurik@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220402204523.32643-1-pisa@cmp.felk.cvut.cz
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU plugins can be loaded via command line arguments or via
the QEMU_PLUGIN environment variable. Currently, only the first method
is documented. Let's document QEMU_PLUGIN.
As drive-by cleanup, this patch fixes the path to the plugins
in the same section of the documentation.
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Message-Id: <20220316181412.1550044-1-cmuellner@linux.com>
[AJB: fixed some minor typos]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As far as I can tell nothing in the source tree uses this file. The
original comment mentions texi2pdf and I think that was all culled
when we switched to our rst documentation pipeline.
Fixes: 4ac2ee194b ("docs/interop: Convert qemu-qmp-ref to rST")
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220316161038.3033723-1-alex.bennee@linaro.org>
We have a growing set of developer docs but the index is currently in
order of when stuff was added. Try and make things a bit easier to
find my adding sub indexes and organising into themes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20220315121251.2280317-7-alex.bennee@linaro.org>
