Commit Graph

2406 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé
46fd3201cb hw/pci-host: Rename Raven ASIC PCI bridge as raven.c
The ASIC PCI bridge chipset from Motorola is named 'Raven'.
This chipset is used in the PowerPC Reference Platform (PReP),
but not restricted to it. Rename it accordingly.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210417103028.601124-5-f4bug@amsat.org>
2021-07-11 22:29:04 +02:00
Bharata B Rao
82123b756a target/ppc: Support for H_RPT_INVALIDATE hcall
If KVM_CAP_RPT_INVALIDATE KVM capability is enabled, then

- indicate the availability of H_RPT_INVALIDATE hcall to the guest via
  ibm,hypertas-functions property.
- Enable the hcall

Both the above are done only if the new sPAPR machine capability
cap-rpt-invalidate is set.

Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20210706112440.1449562-3-bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 11:01:06 +10:00
Alexey Kardashevskiy
21bde1ecb6 spapr: Fix implementation of Open Firmware client interface
This addresses the comments from v22.

The functional changes are (the VOF ones need retesting with Pegasos2):

(VOF) setprop will start failing if the machine class callback
did not handle it;
(VOF) unit addresses are lowered in path_offset();
(SPAPR) /chosen/bootargs is initialized from kernel_cmdline if
the client did not change it.

Fixes: 5c991e5d4378 ("spapr: Implement Open Firmware client interface")
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210708065625.548396-1-aik@ozlabs.ru>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 10:55:11 +10:00
BALATON Zoltan
5f2eb04961 ppc/pegasos2: Implement some RTAS functions with VOF
Linux uses RTAS functions to access PCI devices so we need to provide
these with VOF. Implement some of the most important functions to
allow booting Linux with VOF. With this the board is now usable
without a binary ROM image and we can enable it by default as other
boards.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210708215113.B3F747456E3@zero.eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 10:40:43 +10:00
David Gibson
e7dfb29e5a ppc/pegasos2: Fix use of && instead of &
This is obviously intended to be a mask, not a logical operation.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 10:38:19 +10:00
BALATON Zoltan
a6c9808a68 ppc/pegasos2: Use Virtual Open Firmware as firmware replacement
The pegasos2 board comes with an Open Firmware compliant ROM based on
SmartFirmware but it has some changes that are not open source
therefore the ROM binary cannot be included in QEMU. Guests running on
the board however depend on services provided by the firmware. The
Virtual Open Firmware recently added to QEMU implements a minimal set
of these services to allow some guests to boot without the original
firmware. This patch adds VOF as the default firmware for pegasos2
which allows booting Linux and MorphOS via -kernel option while a ROM
image can still be used with -bios for guests that don't run with VOF.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <1d6ed6f290c5c1f0b5a1e1c51cf1151452d70d9a.1624811233.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 10:38:19 +10:00
Nicholas Piggin
17fd09c021 target/ppc/spapr: Update H_GET_CPU_CHARACTERISTICS L1D cache flush bits
There are several new L1D cache flush bits added to the hcall which reflect
hardware security features for speculative cache access issues.

These behaviours are now being specified as negative in order to simplify
patched kernel compatibility with older firmware (a new problem found in
existing systems would automatically be vulnerable).

[dwg: Technically this changes behaviour for existing machine types.
 After discussion with Nick, we've determined this is safe, because
 the worst that will happen if a guest gets the wrong information due
 to a migration is that it will perform some unnecessary workarounds,
 but will remain correct and secure (well, as secure as it was going
 to be anyway).  In addition the change only affects cap-cfpc=safe
 which is not enabled by default, and in fact is not possible to set
 on any current hardware (though it's expected it will be possible on
 POWER10)]

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210615044107.1481608-1-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 10:38:19 +10:00
BALATON Zoltan
a8eda5ed3d ppc/pegasos2: Introduce Pegasos2MachineState structure
Add own machine state structure which will be used to store state
needed for firmware emulation.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <7f6d5fbf4f70c64dba001483174a2921dd616ecd.1624811233.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 10:38:19 +10:00
Alexey Kardashevskiy
fc8c745d50 spapr: Implement Open Firmware client interface
The PAPR platform describes an OS environment that's presented by
a combination of a hypervisor and firmware. The features it specifies
require collaboration between the firmware and the hypervisor.

Since the beginning, the runtime component of the firmware (RTAS) has
been implemented as a 20 byte shim which simply forwards it to
a hypercall implemented in qemu. The boot time firmware component is
SLOF - but a build that's specific to qemu, and has always needed to be
updated in sync with it. Even though we've managed to limit the amount
of runtime communication we need between qemu and SLOF, there's some,
and it has become increasingly awkward to handle as we've implemented
new features.

This implements a boot time OF client interface (CI) which is
enabled by a new "x-vof" pseries machine option (stands for "Virtual Open
Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall
which implements Open Firmware Client Interface (OF CI). This allows
using a smaller stateless firmware which does not have to manage
the device tree.

The new "vof.bin" firmware image is included with source code under
pc-bios/. It also includes RTAS blob.

This implements a handful of CI methods just to get -kernel/-initrd
working. In particular, this implements the device tree fetching and
simple memory allocator - "claim" (an OF CI memory allocator) and updates
"/memory@0/available" to report the client about available memory.

This implements changing some device tree properties which we know how
to deal with, the rest is ignored. To allow changes, this skips
fdt_pack() when x-vof=on as not packing the blob leaves some room for
appending.

In absence of SLOF, this assigns phandles to device tree nodes to make
device tree traversing work.

When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree.

This adds basic instances support which are managed by a hash map
ihandle -> [phandle].

Before the guest started, the used memory is:
0..e60 - the initial firmware
8000..10000 - stack
400000.. - kernel
3ea0000.. - initramdisk

This OF CI does not implement "interpret".

Unlike SLOF, this does not format uninitialized nvram. Instead, this
includes a disk image with pre-formatted nvram.

With this basic support, this can only boot into kernel directly.
However this is just enough for the petitboot kernel and initradmdisk to
boot from any possible source. Note this requires reasonably recent guest
kernel with:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735

The immediate benefit is much faster booting time which especially
crucial with fully emulated early CPU bring up environments. Also this
may come handy when/if GRUB-in-the-userspace sees light of the day.

This separates VOF and sPAPR in a hope that VOF bits may be reused by
other POWERPC boards which do not support pSeries.

This assumes potential support for booting from QEMU backends
such as blockdev or netdev without devices/drivers used.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
[dwg: Adjusted some includes which broke compile in some more obscure
 compilation setups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 10:38:19 +10:00
Alexey Kardashevskiy
7381c5d11f spapr: tune rtas-size
QEMU reserves space for RTAS via /rtas/rtas-size which tells the client
how much space the RTAS requires to work which includes the RTAS binary
blob implementing RTAS runtime. Because pseries supports FWNMI which
requires plenty of space, QEMU reserves more than 2KB which is
enough for the RTAS blob as it is just 20 bytes (under QEMU).

Since FWNMI reset delivery was added, RTAS_SIZE macro is not used anymore.
This replaces RTAS_SIZE with RTAS_MIN_SIZE and uses it in
the /rtas/rtas-size calculation to account for the RTAS blob.

Fixes: 0e236d3477 ("ppc/spapr: Implement FWNMI System Reset delivery")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210622070336.1463250-1-aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-09 10:38:18 +10:00
Daniel Henrique Barboza
b873ed8331 ppc/pef.c: initialize cgs->ready in kvmppc_svm_init()
QEMU is failing to launch a CGS pSeries guest in a host that has PEF
support:

qemu-system-ppc64: ../softmmu/vl.c:2585: qemu_machine_creation_done: Assertion `machine->cgs->ready' failed.
Aborted

This is happening because we're not setting the cgs->ready flag that is
asserted in qemu_machine_creation_done() during machine start.

cgs->ready is set in s390_pv_kvm_init() and sev_kvm_init(). Let's set it
in kvmppc_svm_init() as well.

Reported-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210528201619.52363-1-danielhb413@gmail.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-03 18:10:31 +10:00
Nicholas Piggin
ac559ecbea spapr: Set LPCR to current AIL mode when starting a new CPU
TCG does not keep track of AIL mode in a central place, it's based on
the current LPCR[AIL] bits. Synchronize the new CPU's LPCR to the
current LPCR in rtas_start_cpu(), similarly to the way the ILE bit is
synchronized.

Open-code the ILE setting as well now that the caller's LPCR is
available directly, there is no need for the indirection.

Without this, under both TCG and KVM, adding a POWER8/9/10 class CPU
with a new core ID after a modern Linux has booted results in the new
CPU's LPCR missing the LPCR[AIL]=0b11 setting that the other CPUs have.
This can cause crashes and unexpected behaviour.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210526091626.3388262-3-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-03 13:22:06 +10:00
Nicholas Piggin
7be3bf6c84 spapr: Remove stale comment about power-saving LPCR bits
Commit 47a9b55154 ("spapr: Clean up handling of LPCR power-saving exit
bits") moved this logic but did not remove the comment from the
previous location.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210526091626.3388262-2-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-03 13:22:06 +10:00
Shivaprasad G Bhat
9f9f82dace spapr: nvdimm: Fix the persistent-memory root node name in device tree
The FDT code is adding the pmem root node by name "persistent-memory"
which should have been "ibm,persistent-memory".

The linux fetches the device tree nodes by type and it has been working
correctly as the type is correct. If someone searches by its intended
name it would fail, so fix that.

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <162204278956.219.9061511386011411578.stgit@cc493db1e665>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-03 13:22:06 +10:00
Shivaprasad G Bhat
f93c8f148c spapr: nvdimm: Forward declare and move the definitions
The subsequent patches add definitions which tend to get
the compilation to cyclic dependency. So, prepare with
forward declarations, move the definitions and clean up.

Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <162133925415.610.11584121797866216417.stgit@4f1e6f2bd33e>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-03 13:22:06 +10:00
Mahesh Salgaonkar
ac9ef66832 spapr: Fix EEH capability issue on KVM guest for PCI passthru
With upstream kernel, especially after commit 98ba956f6a389
("powerpc/pseries/eeh: Rework device EEH PE determination") we see that KVM
guest isn't able to enable EEH option for PCI pass-through devices anymore.

[root@atest-guest ~]# dmesg | grep EEH
[    0.032337] EEH: pSeries platform initialized
[    0.298207] EEH: No capable adapters found: recovery disabled.
[root@atest-guest ~]#

So far the linux kernel was assuming pe_config_addr equal to device's
config_addr and using it to enable EEH on the PE through ibm,set-eeh-option
RTAS call. Which wasn't the correct way as per PAPR. The linux kernel
commit 98ba956f6a389 fixed this flow. With that fixed, linux now uses PE
config address returned by ibm,get-config-addr-info2 RTAS call to enable
EEH option per-PE basis instead of per-device basis. However this has
uncovered a bug in qemu where ibm,set-eeh-option is treating PE config
address as per-device config address.

Hence in qemu guest with recent kernel the ibm,set-eeh-option RTAS call
fails with -3 return value indicating that there is no PCI device exist for
the specified PE config address. The rtas_ibm_set_eeh_option call uses
pci_find_device() to get the PC device that matches specific bus and devfn
extracted from PE config address passed as argument. Thus it tries to map
the PE config address to a single specific PCI device 'bus->devices[devfn]'
which always results into checking device on slot 0 'bus->devices[0]'.
This succeeds when there is a pass-through device (vfio-pci) present on
slot 0. But in cases where there is no pass-through device present in slot
0, but present in non-zero slots, ibm,set-eeh-option call fails to enable
the EEH capability.

hw/ppc/spapr_pci_vfio.c: spapr_phb_vfio_eeh_set_option()
   case RTAS_EEH_ENABLE: {
        PCIHostState *phb;
        PCIDevice *pdev;

        /*
         * The EEH functionality is enabled on basis of PCI device,
         * instead of PE. We need check the validity of the PCI
         * device address.
         */
        phb = PCI_HOST_BRIDGE(sphb);
        pdev = pci_find_device(phb->bus,
                               (addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
        if (!pdev || !object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
            return RTAS_OUT_PARAM_ERROR;
        }

hw/pci/pci.c:pci_find_device()

PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn)
{
    bus = pci_find_bus_nr(bus, bus_num);

    if (!bus)
        return NULL;

    return bus->devices[devfn];
}

This patch fixes ibm,set-eeh-option to check for presence of any PCI device
(vfio-pci) under specified bus and enable the EEH if found. The current
code already makes sure that all the devices on that bus are from same
iommu group (within same PE) and fail very early if it does not.

After this fix guest is able to find EEH capable devices and enable EEH
recovery on it.

[root@atest-guest ~]# dmesg | grep EEH
[    0.048139] EEH: pSeries platform initialized
[    0.405115] EEH: Capable adapter found: recovery enabled.
[root@atest-guest ~]#

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Message-Id: <162158429107.145117.5843504911924013125.stgit@jupiter>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-03 13:22:06 +10:00
Greg Kurz
3bf0844f3b spapr: Don't hijack current_machine->boot_order
QEMU 6.0 moved all the -boot variables to the machine. Especially, the
removal of the boot_order static changed the handling of '-boot once'
from:

    if (boot_once) {
        qemu_boot_set(boot_once, &error_fatal);
        qemu_register_reset(restore_boot_order, g_strdup(boot_order));
    }

to

    if (current_machine->boot_once) {
        qemu_boot_set(current_machine->boot_once, &error_fatal);
        qemu_register_reset(restore_boot_order,
                            g_strdup(current_machine->boot_order));
    }

This means that we now register as subsequent boot order a copy
of current_machine->boot_once that was just set with the previous
call to qemu_boot_set(), i.e. we never transition away from the
once boot order.

It is certainly fragile^Wwrong for the spapr code to hijack a
field of the base machine type object like that. The boot order
rework simply turned this software boundary violation into an
actual bug.

Have the spapr code to handle that with its own field in
SpaprMachineState. Also kfree() the initial boot device
string when "once" was used.

Fixes: 4b7acd2ac8 ("vl: clean up -boot variables")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960119
Cc: pbonzini@redhat.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210521160735.1901914-1-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-03 13:22:06 +10:00
Stefano Garzarella
d0fb9657a3 docs: fix references to docs/devel/tracing.rst
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several references to the old file, so let's fix them
with the following command:

  sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-06-02 06:51:09 +02:00
Philippe Mathieu-Daudé
cfa1f4bcee hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'
Per the kconfig.rst:

  A device should be listed [...] ``imply`` if (depending on
  the QEMU command line) the board may or  may not be started
  without it.

This is the case with the NVDIMM device, so use the 'imply'
weak reverse dependency to select the symbol.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511155354.3069141-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-26 14:49:45 +02:00
Lucas Mateus Castro (alqotel)
03282a3ab8 hw/ppc: moved has_spr to cpu.h
Moved has_spr to cpu.h as ppc_has_spr and turned it into an inline function.
Change spr verification in pnv.c and spapr.c to a version that can
compile in a !TCG environment.

Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210507164146.67086-1-lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-19 10:30:28 +10:00
Lucas Mateus Castro (alqotel)
fd1eb085da target/ppc: moved function out of mmu-hash64
The function ppc_hash64_filter_pagesizes has been moved from a function
with prototype in mmu-hash64.h and implemented in mmu-hash64.c to
a static function in hw/ppc/spapr_caps.c as it's only used in that file.

Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210506163941.106984-3-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-19 10:30:28 +10:00
Lucas Mateus Castro (alqotel)
962104f044 hw/ppc: moved hcalls that depend on softmmu
The hypercalls h_enter, h_remove, h_bulk_remove, h_protect, and h_read,
have been moved to spapr_softmmu.c with the functions they depend on. The
functions is_ram_address and push_sregs_to_kvm_pr are not static anymore
as functions on both spapr_hcall.c and spapr_softmmu.c depend on them.
The hypercalls h_resize_hpt_prepare and h_resize_hpt_commit have been
divided, the KVM part stayed in spapr_hcall.c while the softmmu part
was moved to spapr_softmmu.c

Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210506163941.106984-2-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-19 10:30:28 +10:00
Fabiano Rosas
ab5add4c7b hw/ppc/spapr.c: Make sure the host supports the selected MMU mode
Starting with Linux kernel v5.12 we dropped support[1] in KVM for
hosts that can't have their threads running in different MMU modes
(POWER9 < DD2.2). In these hosts, KVM will no longer report the
KVM_CAP_PPC_MMU_HASH_V3 capability[2] when the host is running Radix.

For guests that support both MMU modes, the negotiation during CAS
will make sure it selects the correct one.

For guests that only support Hash, such as P8 compat mode guests, the
following error is currently thrown:

  $ ~/qemu-system-ppc64 -machine pseries,accel=kvm,max-cpu-compat=power8 ...
  error: kvm run failed Invalid argument
  NIP 0000000000000100   LR 0000000000000000 CTR 0000000000000000 XER 0000000000000000 CPU#0
  MSR 8000000000001000 HID0 0000000000000000  HF 8000000000000000 iidx 3 didx 3
  TB 00000000 00000000 DECR 0
  GPR00 0000000000000000 0000000000000000 0000000000000000 000000007ff00000
  GPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR08 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR12 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  CR 00000000  [ -  -  -  -  -  -  -  -  ]             RES ffffffffffffffff
   SRR0 0000000000000000  SRR1 0000000000000000    PVR 00000000004e1201 VRSAVE 0000000000000000
  SPRG0 0000000000000000 SPRG1 0000000000000000  SPRG2 0000000000000000  SPRG3 0000000000000000
  SPRG4 0000000000000000 SPRG5 0000000000000000  SPRG6 0000000000000000  SPRG7 0000000000000000
  HSRR0 0000000000000000 HSRR1 0000000000000000
   CFAR 0000000000000000
   LPCR 000000000004f01f
   PTCR 0000000000000000   DAR 0000000000000000  DSISR 0000000000000000

This patch adds a verification during the writing of the platform
support vector so that we error out as soon as we determine this guest
only supports Hash and the host doesn't.

  ~/qemu-system-ppc64 -machine pseries,accel=kvm,max-cpu-compat=power8 ...
  qemu-system-ppc64: Guest requested unavailable MMU mode (hash).

1- https://git.kernel.org/torvalds/p/b1b1697ae0cc8
2- https://git.kernel.org/torvalds/p/a722076e94702

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210505001130.3999968-3-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-19 10:30:28 +10:00
Fabiano Rosas
068479e1e1 hw/ppc/spapr.c: Extract MMU mode error reporting into a function
A following patch will make use of it.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210505001130.3999968-2-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-19 10:30:28 +10:00
Peter Maydell
d90f154867 ppc patch queue 2021-05-04
Here's the first ppc pull request for qemu-6.1.  It has a wide variety
 of stuff accumulated during the 6.0 freeze.  Highlights are:
 
  * Multi-phase reset cleanups for PAPR
  * Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
  * Cleanup of AIL logic and extension to POWER10
  * Further improvements to handling of hot unplug failures on PAPR
  * Allow much larger numbers of CPU on pseries
  * Support for the H_SCM_HEALTH hypercall
  * Add support for the Pegasos II board
  * Substantial cleanup to hflag handling
  * Assorted minor fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAmCQ4ScACgkQbDjKyiDZ
 s5KmNhAAsICdDqeu/jm1uhRCr0DDT/Wa6KE1xlglQ53ybWb5Hm2ae0Uwzti5ZWkt
 T9yryObX++wiugbU5Dlx9eXTiJIPgTbDoBV1wfOa3a1BAxSEES1t70jwuwAXXBpX
 mgU++SurQB70IB7vVvyXDi2Z592qGvMiKXqT0sdkfoexPHzAL0+KkQPyJZLeFchM
 Ap/zRHAodXf9SuWAl+LwLXeb350jivXYXBWNcFRrBbOGpbVT0AJMYrk/TEa2ZIpi
 SvbzAWuW+9mX0EOmk7JK5JfkT41cGNdcBcwd0bt4xyvUpmkXLaTMFDLVHj3HWSUn
 PFA4RB3uKXyTfISVtWdxJBbFOzMpchI6lEiRJHCS+KuY7UsACqV1T/y54ATOUauC
 ycLc9APgRaStdNPxfDl+xeFfoVb/f0mQsNwcmY1tv7z+3qE/trY9bMyrbgaebBFn
 /TAkmPvXfwtAREnx8xF/57poarWUkvupGTQkANNosdFokpExmrLj8T0sKv90hh5Y
 vkGf5zP4pYGN1Rs8qhOdHu+IjhVJvUl/L3LZYWcoMI6E61D8rGRc0Dkacx7gcja+
 sluFi5Yh2fQn55y6LTi3049cB1wMd6wly0214F11RKoBswguiGuaqJmL4sNDO/s4
 IcMCy5mg6C0jNZA5kHcdWmqsVzD2+XwP5J29n/LedlmgXoHYF+M=
 =N0qr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' into staging

ppc patch queue 2021-05-04

Here's the first ppc pull request for qemu-6.1.  It has a wide variety
of stuff accumulated during the 6.0 freeze.  Highlights are:

 * Multi-phase reset cleanups for PAPR
 * Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
 * Cleanup of AIL logic and extension to POWER10
 * Further improvements to handling of hot unplug failures on PAPR
 * Allow much larger numbers of CPU on pseries
 * Support for the H_SCM_HEALTH hypercall
 * Add support for the Pegasos II board
 * Substantial cleanup to hflag handling
 * Assorted minor fixes and cleanups

# gpg: Signature made Tue 04 May 2021 06:52:39 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits)
  hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
  hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
  hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset()
  target/ppc: removed VSCR from SPR registration
  target/ppc: Reduce the size of ppc_spr_t
  target/ppc: Clean up _spr_register et al
  target/ppc: Add POWER10 exception model
  target/ppc: rework AIL logic in interrupt delivery
  target/ppc: move opcode table logic to translate.c
  target/ppc: code motion from translate_init.c.inc to gdbstub.c
  spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
  spapr.h: increase FDT_MAX_SIZE
  spapr.c: do not use MachineClass::max_cpus to limit CPUs
  ppc: Rename current DAWR macros and variables
  target/ppc: POWER10 supports scv
  target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour
  docs/system: ppc: Add documentation for ppce500 machine
  roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support
  roms/Makefile: Update ppce500 u-boot build directory name
  ppc/spapr: Add support for implement support for H_SCM_HEALTH
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-05 20:29:14 +01:00
Peter Maydell
4bb32cd7b1 hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
The pnv_psi.c code uses device_legacy_reset() for two purposes:
 * to reset itself from its qemu_register_reset() handler
 * to reset a XiveSource object it has

Neither it nor the XiveSource have any qbuses, so the new
device_cold_reset() function (which resets both the device and its
child buses) is equivalent here to device_legacy_reset() and we can
just switch to the new API.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210503151849.8766-4-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 13:12:59 +10:00
Peter Maydell
3e1c8ba988 hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
The spapr_vio_quiesce_one() function resets the TCE table object
(TYPE_SPAPR_TCE_TABLE) via device_legacy_reset().  We know that
objects of that type do not have a qbus of their own, so the new
device_cold_reset() function (which resets both the device and its
child buses) is equivalent here to device_legacy_reset() and we can
just switch to the new API.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210503151849.8766-3-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 13:12:59 +10:00
Nicholas Piggin
526cdce771 target/ppc: Add POWER10 exception model
POWER10 adds a new bit that modifies interrupt behaviour, LPCR[HAIL],
and it removes support for the LPCR[AIL]=0b10 mode.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210501072436.145444-3-npiggin@gmail.com>
[dwg: Corrected tab indenting]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 13:12:46 +10:00
Nicholas Piggin
8b7e6b07a4 target/ppc: rework AIL logic in interrupt delivery
The AIL logic is becoming unmanageable spread all over powerpc_excp(),
and it is slated to get even worse with POWER10 support.

Move it all to a new helper function.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210501072436.145444-2-npiggin@gmail.com>
[dwg: Corrected tab indenting]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 13:12:02 +10:00
Daniel Henrique Barboza
87758fed7a spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
At this moment, PAPR does not provide a way to report errors during a
device removal operation. This led the pSeries machine to implement
extra mechanisms to try to fallback and recover from an error that might
have happened during the hotunplug in the guest side. This started to
change a bit with commit fe1831eff8 ("spapr_drc.c: use DRC
reconfiguration to cleanup DIMM unplug state"), where one way to
fallback from a memory removal error was introduced.

Around the same time, in [1], the idea of using RTAS set-indicator for
this role was first introduced. The RTAS set-indicator call, when
attempting to UNISOLATE a DRC that is already UNISOLATED or CONFIGURED,
returns RTAS_OK and does nothing else for both QEMU and phyp. This gives
us an opportunity to use this behavior to signal the hypervisor layer
when a device removal errir happens, allowing QEMU/phyp to do a proper
error handling. Using set-indicator to report HP errors isn't strange to
PAPR, as per R1-13.5.3.4-4. of table 13.7 of current PAPR [2]:

"For all DR options: If this is a DR operation that involves the user
insert- ing a DR entity, then if the firmware can determine that the
inserted entity would cause a system disturbance, then the set-indicator
RTAS call must not unisolate the entity and must return an error status
which is unique to the particular error."

A change was proposed to the pSeries Linux kernel to call set-indicator
to move a DRC to 'unisolate' in the case of a hotunplug error in the
guest side [3]. Setting a DRC that is already unisolated or configured to
'unisolate' is a no-op (returns RTAS_OK) for QEMU and also for phyp.
Being a benign change for hypervisors that doesn't care about handling
such errors, we expect the kernel to accept this change at some point.

This patch prepares the pSeries machine for this new kernel feature by
changing drc_unisolate_logical() to handle guest side hotunplug errors.
For CPUs it's a simple matter of setting drc->unplug_requested to 'false',
while for LMBs the process is similar to the rollback that is done in
rtas_ibm_configure_connector().

[1] https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg06395.html
[2] https://openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200611.pdf
[3] https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20210416210216.380291-3-danielhb413@gmail.com/

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210420165100.108368-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
Daniel Henrique Barboza
5642e4513e spapr.c: do not use MachineClass::max_cpus to limit CPUs
Up to this patch, 'max_cpus' value is hardcoded to 1024 (commit
6244bb7e58). In theory this patch would simply bump it to 2048, since
it's the default NR_CPUS kernel setting for ppc64 servers nowadays, but
the whole mechanic of MachineClass:max_cpus is flawed for the pSeries
machine. The two supported accelerators, KVM and TCG, can live without
it.

TCG guests don't have a theoretical limit. The user must be free to
emulate as many CPUs as the hardware is capable of. And even if there
were a limit, max_cpus is not the proper way to report it since it's a
common value checked by SMP code in machine_smp_parse() for KVM as well.

For KVM guests, the proper way to limit KVM CPUs is by host
configuration via NR_CPUS, not a QEMU hardcoded value. There is no
technical reason for a pSeries QEMU guest to forcefully stay below
NR_CPUS.

This hardcoded value also disregard hosts that might have a lower
NR_CPUS limit, say 512. In this case, machine.c:machine_smp_parse() will
allow a 1024 value to pass, but then kvm_init() will complain about it
because it will exceed NR_CPUS:

Number of SMP cpus requested (1024) exceeds the maximum cpus supported
by KVM (512)

A better 'max_cpus' value would consider host settings, but
MachineClass::max_cpus is defined well before machine_init() and
kvm_init(). We can't check for KVM limits because it's too soon, so we
end up making a guess.

This patch makes MachineClass:max_cpus settings innocuous by setting it
to INT32_MAX. machine.c:machine_smp_parse() will not fail the
verification based on max_cpus, letting kvm_init() do the checking with
actual host settings. And TCG guests get to do whatever the hardware is
capable of emulating.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210408204049.221802-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
Vaibhav Jain
53d7d7e2b1 ppc/spapr: Add support for implement support for H_SCM_HEALTH
Add support for H_SCM_HEALTH hcall described at [1] for spapr
nvdimms. This enables guest to detect the 'unarmed' status of a
specific spapr nvdimm identified by its DRC and if its unarmed, mark
the region backed by the nvdimm as read-only.

The patch adds h_scm_health() to handle the H_SCM_HEALTH hcall which
returns two 64-bit bitmaps (health bitmap, health bitmap mask) derived
from 'struct nvdimm->unarmed' member.

Linux kernel side changes to enable handling of 'unarmed' nvdimms for
ppc64 are proposed at [2].

References:
[1] "Hypercall Op-codes (hcalls)"
    https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst#n220
[2] "powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe"
    https://lore.kernel.org/linux-nvdimm/20210329113103.476760-1-vaibhav@linux.ibm.com/

Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-Id: <20210402102128.213943-1-vaibhav@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
Alexey Kardashevskiy
4b98e72d97 spapr: Rename RTAS_MAX_ADDR to FDT_MAX_ADDR
SLOF instantiates RTAS since
744a928cce ("spapr: Stop providing RTAS blob")
so the max address applies to the FDT only.

This renames the macro and fixes up the comment.

This should not cause any behavioral change.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210331025123.29310-1-aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
BALATON Zoltan
ba7e5ac18e hw/ppc: Add emulation of Genesi/bPlan Pegasos II
Add new machine called pegasos2 emulating the Genesi/bPlan Pegasos II,
a PowerPC board based on the Marvell MV64361 system controller and the
VIA VT8231 integrated south bridge/superio chips. It can run Linux,
AmigaOS and a wide range of MorphOS versions. Currently a firmware ROM
image is needed to boot and only MorphOS has a video driver to produce
graphics output. Linux could work too but distros that supported this
machine don't include usual video drivers so those only run with
serial console for now.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <30cbfb9cbe6f46a1e15a69a75fac45ac39340122.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
Richard Henderson
e81f17a3f6 hw/ppc/spapr_rtas: Update hflags after setting msr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-16-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:24 +10:00
Richard Henderson
bd4160bc6a hw/ppc/pnv_core: Update hflags after setting msr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-15-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:24 +10:00
Philippe Mathieu-Daudé
03b3542ac9 hw/ppc/mac_newworld: Restrict RAM to 2 GiB
On Mac99 and newer machines, the Uninorth PCI host bridge maps
the PCI hole region at 2GiB, so the RAM area beside 2GiB is not
accessible by the CPU. Restrict the memory to 2GiB to avoid
problems such the one reported in the buglink.

Buglink: https://bugs.launchpad.net/qemu/+bug/1922391
Reported-by: Håvard Eidnes <he@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210406084842.2859664-1-f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:24 +10:00
Thomas Huth
ee86213aa3 Do not include exec/address-spaces.h if it's not really necessary
Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Thomas Huth
2068cabd3f Do not include cpu.h if it's not really necessary
Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Thomas Huth
ead62c75f6 Do not include hw/boards.h if it's not really necessary
Stop including hw/boards.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Thomas Huth
4c386f8064 Do not include sysemu/sysemu.h if it's not really necessary
Stop including sysemu/sysemu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Thomas Huth
19f4ed3652 hw: Do not include qemu/log.h if it is not necessary
Many files include qemu/log.h without needing it. Remove the superfluous
include statements.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210328054833.2351597-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Thomas Huth
e924921f5c hw: Do not include hw/irq.h if it is not necessary
Many files include hw/irq.h without needing it. Remove the superfluous
include statements.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210327050236.2232347-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Cornelia Huck
da7e13c00b hw: add compat machines for 6.1
Add 6.1 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Message-id: 20210331111900.118274-1-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-30 11:16:51 +01:00
Daniel Henrique Barboza
2b18fc794f spapr.c: always pulse guest IRQ in spapr_core_unplug_request()
Commit 47c8c915b1 fixed a problem where multiple spapr_drc_detach()
requests were breaking QEMU. The solution was to just spapr_drc_detach()
once, and use spapr_drc_unplug_requested() to filter whether we already
detached it or not. The commit also tied the hotplug request to the
guest in the same condition.

Turns out that there is a reliable way for a CPU hotunplug to fail. If a
guest with one CPU hotplugs a CPU1, then offline CPU0s via 'echo 0 >
/sys/devices/system/cpu/cpu0/online', then attempts to hotunplug CPU1,
the kernel will refuse it because it's the last online CPU of the
system. Given that we're pulsing the IRQ only in the first try, in a
failed attempt, all other CPU1 hotunplug attempts will fail, regardless
of the online state of CPU1 in the kernel, because we're simply not
letting the guest know that we want to hotunplug the device.

Let's move spapr_hotplug_req_remove_by_index() back out of the "if
(!spapr_drc_unplug_requested(drc))" conditional, allowing for multiple
'device_del' requests to the same CPU core to reach the guest, in case
the CPU core didn't fully hotunplugged previously.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210401000437.131140-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-04-12 12:27:14 +10:00
Daniel Henrique Barboza
d522cb52e6 spapr: rollback 'unplug timeout' for CPU hotunplugs
The pseries machines introduced the concept of 'unplug timeout' for CPU
hotunplugs. The idea was to circunvent a deficiency in the pSeries
specification (PAPR), that currently does not define a proper way for
the hotunplug to fail. If the guest refuses to release the CPU (see [1]
for an example) there is no way for QEMU to detect the failure.

Further discussions about how to send a QAPI event to inform about the
hotunplug timeout [2] exposed problems that weren't predicted back when
the idea was developed. Other QEMU machines don't have any type of
hotunplug timeout mechanism for any device, e.g. ACPI based machines
have a way to make hotunplug errors visible to the hypervisor. This
would make this timeout mechanism exclusive to pSeries, which is not
ideal.

The real problem is that a QAPI event that reports hotunplug timeouts
puts the management layer (namely Libvirt) in a weird spot. We're not
telling that the hotunplug failed, because we can't be 100% sure of
that, and yet we're resetting the unplug state back, preventing any
DEVICE_DEL events to reach out in case the guest decides to release the
device. Libvirt would need to inspect the guest itself to see if the
device was released or not, otherwise the internal domain states will be
inconsistent.  Moreover, Libvirt already has an 'unplug timeout'
concept, and a QEMU side timeout would need to be juggled together with
the existing Libvirt timeout.

All this considered, this solution ended up creating more trouble than
it solved. This patch reverts the 3 commits that introduced the timeout
mechanism for CPU hotplugs in pSeries machines.

This reverts commit 4515a5f786
"qemu_timer.c: add timer_deadline_ms() helper"

This reverts commit d1c2e3ce3d
"spapr_drc.c: add hotunplug timeout for CPUs"

This reverts commit 51254ffb32
"spapr_drc.c: introduce unplug_timeout_timer"

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1911414
[2] https://lists.gnu.org/archive/html/qemu-devel/2021-03/msg04682.html

CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210401000437.131140-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-04-12 12:27:14 +10:00
Peter Maydell
e7e0d52dc6 hw/ppc/e500plat: Only try to add valid dynamic sysbus devices to platform bus
The e500plat machine device plug callback currently calls
platform_bus_link_device() for any sysbus device.  This is overly
broad, because platform_bus_link_device() will unconditionally grab
the IRQs and MMIOs of the device it is passed, whether it was
intended for the platform bus or not.  Restrict hotpluggability of
sysbus devices to only those devices on the dynamic sysbus allowlist.

We were mostly getting away with this because the board creates the
platform bus as the last device it creates, and so the hotplug
callback did not do anything for all the sysbus devices created by
the board itself.  However if the user plugged in a device which
itself uses a sysbus device internally we would have mishandled this
and probably asserted. An example of this is:
 qemu-system-ppc64 -M ppce500 -device macio-oldworld

This isn't a sensible command because the macio-oldworld device
is really specific to the 'g3beige' machine, but we now fail
with a reasonable error message rather than asserting:
qemu-system-ppc64: Device heathrow is not supported by this machine yet.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20210325153310.9131-5-peter.maydell@linaro.org
2021-04-06 11:49:14 +01:00
Greg Kurz
df2d7ca774 spapr: Assert DIMM unplug state in spapr_memory_unplug()
spapr_memory_unplug() is the last step of the hot unplug sequence.
It is indirectly called by:

 spapr_lmb_release()
  hotplug_handler_unplug()

and spapr_lmb_release() already buys us that DIMM unplug state is
present : it gets restored with spapr_recover_pending_dimm_state()
if missing.

g_assert() that spapr_pending_dimm_unplugs_find() cannot return NULL
in spapr_memory_unplug() to make this clear and silence Coverity.

Fixes: Coverity CID 1450767
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161562021166.948373.15092876234470478331.stgit@bahia.lan>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-31 11:10:50 +11:00
Bin Meng
093256789a hw/ppc: e500: Add missing #address-cells and #size-cells in the eTSEC node
Per devicetree spec v0.3 [1] chapter 2.3.5:

The #address-cells and #size-cells properties are not inherited
from ancestors in the devicetree. They shall be explicitly defined.
If missing, a client program should assume a default value of 2
for #address-cells, and a value of 1 for #size-cells.

These properties are currently missing, causing the <reg> property
of the queue-group subnode to be incorrectly parsed using default
values.

[1] https://github.com/devicetree-org/devicetree-specification/releases/download/v0.3/devicetree-specification-v0.3.pdf

Fixes: fdfb7f2cdb ("e500: Add support for eTSEC in device tree")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210311081608.66891-1-bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-31 11:10:50 +11:00
Daniel P. Berrangé
b501018339 hw/ide: remove 'ide-drive' device
The 'ide-hd' and 'ide-cd' devices provide suitable alternatives.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00