min was unknown here, so avoid it.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
size_t needs a different format specifier, so fix this.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With the new gcc format warnings, gcc detected this:
/qemu/hw/virtio-9p.c:1040: error: format ‘%u’ expects type ‘unsigned int’, but argument 4 has type ‘__nlink_t’
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since version 4.4.x, gcc supports additional format attributes.
__attribute__ ((format (gnu_printf, 1, 2)))
should be used instead of
__attribute__ ((format (printf, 1, 2))
because QEMU always uses standard format strings (even with mingw32).
The patch replaces format attribute printf / __printf__ by macro
GCC_FMT_ATTR which uses gnu_printf if supported.
It also removes an #ifdef __GNUC__ (not needed any longer).
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix address truncation in sysbus by using a wider type.
Reported-by: Artyom Tarasenko <atar4qemu@googlemail.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The addition of memory stats reporting to the virtio balloon causes
the 'info balloon' command to become asynchronous. This is a regression
because in some cases it can hang the user monitor.
This is an alternative to Adam Litke's patch. Adam's patch disabled the
corresponding (guest-visible) virtio feature bit, causing issues for migration.
Original discussion is available at:
http://marc.info/?l=qemu-devel&m=128448124328314&w=2
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Adam Litke <agl@us.ibm.com
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init.c.
Haiku doesn't implement madvise() in favor of posix_madvise().
OpenBSD and Solaris 10 don't implement posix_madvise() but madvise().
MinGW implements neither.
Check for madvise() and posix_madvise() in configure and supply qemu_madvise()
as wrapper. Prefer madvise() over posix_madvise() due to flag availability.
Convert all callers to use qemu_madvise() and QEMU_MADV_*.
Note that on Solaris the warning is fixed by moving the madvise() prototype,
not by qemu_madvise() itself. It helps with porting though, and it simplifies
most call sites.
v7 -> v8:
* Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl.
v6 -> v7:
* Adopt madvise() rather than posix_madvise() semantics for returning errors.
* Use EINVAL in place of ENOTSUP.
v5 -> v6:
* Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID.
Spotted by Blue Swirl.
v4 -> v5:
* Introduce QEMU_MADV_INVALID, suggested by Alexander Graf.
Note that this relies on -1 not being a valid advice value.
v3 -> v4:
* Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl.
This will currently break the check in kvm-all.c by calling madvise() with
a supported flag, which will not fail. Ideas/patches welcome.
v2 -> v3:
* Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf.
* Add configure check for madvise(), too.
Add defines to Makefile, not QEMU_CFLAGS.
Convert all callers, untested. Suggested by Blue Swirl.
* Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf.
* Display configure check results.
v1 -> v2:
* Don't rely on posix_madvise() availability, add qemu_madvise().
Suggested by Blue Swirl.
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make it possible for boards to override the kind of interrupt
to be signaled when the decr timer hits. The 405's signal PIT
interrupts while the 440's signal DECR.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
./hw/sd.c: In function ‘sd_init’:
./hw/sd.c:443: error: implicit declaration of function ‘qemu_blockalign’
./hw/sd.c:443: error: nested extern declaration of ‘qemu_blockalign’
./hw/sd.c:443: error: assignment makes pointer from integer without a cast
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix two compiler warnings (when format attribute is applied).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix two compiler warnings (when format attribute is applied)
and one error (missing %) in format strings.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For the RESERVE and RELEASE commands the length must be zero
and xfer_mode must be SCSI_XFER_NONE.
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ensure that pending requests of a SCSI generic device are purged on
system reset. This also avoids calling a NULL function in lsi53c895a.
The lsi code was recently changed to call the .qdev.reset function.
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
IDE is a bit ugly in this respect. For one it doesn't really keep track
of a sector size - most of the protocol is in units of 512 bytes, and we
assume 2048 bytes for CDROMs which is correct most of the time.
Second IDE allocates an I/O buffer long before we know if we're dealing
with a CDROM or not, so increase the alignment for the io_buffer
unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_blockalign for all allocations in the block layer. This allows
increasing the required alignment, which is need to support O_DIRECT on
devices with large block sizes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The OpenIndiana (Solaris) e1000g driver drops frames that are too long
or too short. It expects to receive frames of at least the Ethernet
minimum size. ARP requests in particular are small and will be dropped
if they are not padded appropriately, preventing a Solaris VM from
becoming visible on the network.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the compiler supports the warning flag -Wempty-body, use it.
Adjust the code to avoid the warnings.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix SSSR TFN logic: TX FIFO is never filled, so it is always in
underrun condition if SSP is enabled.
This also avoids a gcc warning with -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove checks which were made useless by r5849,
8da3ff1809.
This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use range_covers_byte() instead of comparisons.
This avoids some warnings with GCC flag -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Because of the use of unsigned types, possible errors during
BIOS or kernel load were ignored.
Fix by using a signed type.
This also avoids some warnings with GCC flag -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is the patch to update serial port parameters after guest is
already loaded.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
file.index is unsigned, hence 'while (--file.index >= 0)'
will loop > forever. Change to while (file.index-- > 0).
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Macros normally should not end with a semicolon,
otherwise their usage results in two statements
where only one statement was expected.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Sending ESP a command caused it to trigger DMA immediately
even if DMA was not enabled at the DMA controller.
Add a signal from DMA controller to ESP to tell ESP about changes in
DMA enable bit. Also use the correct function for setting up GPIO outputs.
This fixes NetBSD 1.6.1 through 3.0 boot.
Thanks to Artyom Tarasenko for extensive debugging of the problem.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Janne Huttunen noticed that the FIFO end pointer is updated by the
guest after writing each word to the FIFO, at least the X.org driver
which is open does this. This means that there's no way for the
host to know if the guest is in the middle a write operation. Qemu
thus needs to read the beginning of the command up to when it's able
to tell how many words are expected for the given command. It will
abort reading and rewind the FIFO if there aren't enough words yet,
this should be relatively rare but it is suspected to have been the
cause of the occasional FIFO overrun that killed the display.
Character devices created by qemu_chr_open don't
allow duplicate device names, so naming all
UART devices "null" no longer works.
Running "qemu-system-arm -M n800" (and some other machines)
results in this error message:
qemu-system-arm: Duplicate ID 'null' for chardev
Can't create serial device, empty char device
This is fixed by setting a default label "uart1",
"uart2" or "uart3".
Cc: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
This patch adds trace events for virtqueue operations including
adding/removing buffers, notifying the guest, and receiving a notify
from the guest.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Symbols with a size of 0 are unusable for the disassembler.
Example:
While running an arm linux kernel, no symbolic names are
used in qemu.log when the cpu is executing an assembler function.
Assume that the size of such symbols is the difference to the
next symbol value.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch applies on top of 9P2000.L patches that we have on the list.
I took a look at how 9P server is handling open() flags in 9P2000.L path.
I think we can do away with the valid_flags() function and simplify the
code. The reasoning is as follows:
O_NOCTTY: (If the file is a terminal, don't make it the controlling
terminal of the process even though the process does not have a controlling
terminal) By the time the control reaches 9P client it is clear that what
we have is not a terminal device. Hence it does not matter what we do with
this flag. In any case 9P server can filter this flag out before making the
syscall.
O_NONBLOCK: (Don't block if i) Can't read/write to the file ii) Can't get
locks) This has an impact on FIFOs, but also on file locks. Hence we can
pass it down to the system call.
O_ASYNC: From the manpage:
O_ASYNC
Enable signal-driven I/O: generate a signal (SIGIO by default, but
this can be changed via fcntl(2)) when input or output becomes pos-
sible on this file descriptor. This feature is only available for
terminals, pseudo-terminals, sockets, and (since Linux 2.6) pipes
and FIFOs. See fcntl(2) for further details.
Again, this does not make any impact on regular files handled by 9P. Also,
we don't want 9P server to receive SIGIO. Hence I think 9P server can
filter this flag out before making the syscall.
O_CLOEXEC: This flag makes sense only on the client. If guest user space
sets this flag the guest VFS will take care of calling close() on the fd if
an exec() happens. Hence 9P client need not be bothered with this flag.
Also I think QEMU will not do an exec, but if it does, it makes sense to
close these fds. Hence we can pass this flag down to the syscall.
O_CREAT: Since we are in open() path it means we have confirmed that the file
exists. Hence there is no need to pass O_CREAT flag down to the system. In fact
on some versions of glibc this causes problems, because we pass O_CREAT flag,
but don't have permission bits. Hence we can just mask this flag out.
So in summary:
Mask out:
O_NOCTTY
O_ASYNC
O_CREAT
Pass-through:
O_NONBLOCK
O_CLOEXEC
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
