Commit Graph

617 Commits

Author SHA1 Message Date
Stefan Hajnoczi
c3673dcf08 qemu-img: allow qemu-img measure --object without a filename
In most qemu-img sub-commands the --object option only makes sense when
there is a filename.  qemu-img measure is an exception because objects
may be referenced from the image creation options instead of an existing
image file.  Allow --object without a filename.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-4-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-11 12:42:29 +01:00
Max Reitz
c69291e712 qemu-img: Fix convert -n -B for backing-less targets
s.target_has_backing does not reflect whether the target BDS has a
backing file; it only tells whether we should use a backing file during
conversion (specified by -B).

As such, if you use convert -n, the target does not necessarily actually
have a backing file, and then dereferencing out_bs->backing fails here.

When converting to an existing file, we should set
target_backing_sectors to a negative value, because first, as the
comment explains, this value is only used for optimization, so it is
always fine to do that.

Second, we use this value to determine where the target must be
initialized to zeroes (overlays are initialized to zero after the end of
their backing file).  When converting to an existing file, we cannot
assume that to be true.

Cc: qemu-stable@nongnu.org
Fixes: 351c8efff9
       ("qemu-img: Special post-backing convert handling")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200121155915.98232-2-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-20 16:43:42 +01:00
David Edmondson
168468fe19 qemu-img: Add --target-is-zero to convert
In many cases the target of a convert operation is a newly provisioned
target that the user knows is blank (reads as zero). In this situation
there is no requirement for qemu-img to wastefully zero out the entire
device.

Add a new option, --target-is-zero, allowing the user to indicate that
an existing target device will return zeros for all reads.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200205110248.2009589-2-david.edmondson@oracle.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-20 16:43:42 +01:00
Aarushi Mehta
cdd267749a qemu-img: adds option to use aio engine for benchmarking
Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-13-stefanha@redhat.com
Message-Id: <20200120141858.587874-13-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30 20:59:42 +00:00
Stefan Hajnoczi
0da7d13a4c qemu-img: fix info --backing-chain --image-opts
Only apply --image-opts to the topmost image when listing an entire
backing chain.  It is incorrect to treat backing filenames as image
options.  Assuming we have the backing chain t.IMGFMT.base <-
t.IMGFMT.mid <- t.IMGFMT, qemu-img info fails as follows:

  $ qemu-img info --backing-chain --image-opts \
      driver=qcow2,file.driver=file,file.filename=t.IMGFMT
  qemu-img: Could not open 'TEST_DIR/t.IMGFMT.mid': Cannot find device=TEST_DIR/t.IMGFMT.mid nor node_name=TEST_DIR/t.IMGFMT.mid

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-18 11:20:57 +01:00
Max Reitz
09c5c6de41 Revert "qemu-img: Check post-truncation size"
This reverts commit 5279b30392.

We no longer need this check because exact=true forces the block driver
to give the image the exact size requested by the user.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-9-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28 12:10:03 +01:00
Max Reitz
e8d04f9237 block: Pass truncate exact=true where reasonable
This is a change in behavior, so all instances need a good
justification.  The comments added here should explain my reasoning.

qed already had a comment that suggests it always expected
bdrv_truncate()/blk_truncate() to behave as if exact=true were passed
(c743849bee came eight months before 55b949c847), so it was simply
broken until now.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-8-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[mreitz: Changed comment in qed.c to explain why a new QED file must be
         empty, as requested and suggested by Maxim]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28 12:08:45 +01:00
Max Reitz
c80d8b06cf block: Add @exact parameter to bdrv_co_truncate()
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk.  Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.

This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around.  All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior.  Future patches take care
of that.

Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28 12:00:07 +01:00
Kevin Wolf
c6e5cdfd4b qemu-img: Support help options for --object
Instead of parsing help options as normal object properties and
returning an error, provide the same help functionality as the system
emulator in qemu-img, too.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-10-14 17:12:48 +02:00
Nir Soffer
1bbbf32d5f block: Use QEMU_IS_ALIGNED
Replace instances of:

    (n & (BDRV_SECTOR_SIZE - 1)) == 0

And:

   (n & ~BDRV_SECTOR_MASK) == 0

With:

    QEMU_IS_ALIGNED(n, BDRV_SECTOR_SIZE)

Which reveals the intent of the code better, and makes it easier to
locate the code checking alignment.

Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827185913.27427-2-nsoffer@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16 14:48:30 +02:00
Vladimir Sementsov-Ogievskiy
ac850bf099 block: define .*_part io handlers in BlockDriver
Add handlers supporting qiov_offset parameter:
    bdrv_co_preadv_part
    bdrv_co_pwritev_part
    bdrv_co_pwritev_compressed_part
This is used to reduce need of defining local_qiovs and hd_qiovs in all
corners of block layer code. The following patches will increase usage
of this new API part by part.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-5-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-5-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-08-27 14:58:42 +01:00
Max Reitz
4d7c487eac qemu-img: Fix bdrv_has_zero_init() use in convert
bdrv_has_zero_init() only has meaning for newly created images or image
areas.  If qemu-img convert did not create the image itself, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-2-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-19 17:13:26 +02:00
Peter Maydell
e018ccb3fb Block layer patches:
- file-posix: Fix O_DIRECT alignment detection
 - Fixes for concurrent block jobs
 - block-backend: Queue requests while drained (fix IDE vs. job crashes)
 - qemu-img convert: Deprecate using -n and -o together
 - iotests: Migration tests with filter nodes
 - iotests: More media change tests
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdVnduAAoJEH8JsnLIjy/W0IgQAKft/M3aDgt0sbTzQh8vdy6A
 yAfTnnSL4Z56+8qAsqhEnplC3rZxvTkg9AGOoNYHOZKl3FgRH9r8g9/Enemh4fWu
 MH52hiRf2ytlFVurIQal3aj9O+i0YTnzuvYbysvkH4ID5zbv2QnwdagtEcBxbbYL
 NZTMZBynDzp4rKIZ7p6T/kkaklLHh4vZrjW+Mzm3LQx9JJr8TwVNqqetSfc4VKIJ
 ByaNbbihDUVjQyIaJ24DXXJdzonGrrtSbSZycturc5FzXymzSRgrXZCeSKCs8X+i
 fjwMXH5v4/UfK511ILsXiumeuxBfD2Ck4sAblFxVo06oMPRNmsAKdRLeDByE7IC1
 lWep/pB3y/au9CW2/pkWJOiaz5s5iuv2fFYidKUJ0KQ1dD7G8M9rzkQlV3FUmTZO
 jBKSxHEffXsYl0ojn0vGmZEd7FAPi3fsZibGGws1dVgxlWI93aUJsjCq0E+lHIRD
 hEmQcjqZZa4taKpj0Y3Me05GkL7tH6RYA153jDNb8rPdzriGRCLZSObEISrOJf8H
 Mh0gTLi8KJNh6bULd12Ake1tKn7ZeTXpHH+gadz9OU7eIModh1qYTSHPlhy5oAv0
 Hm9BikNlS1Hzw+a+EbLcOW7TrsteNeGr7r8T6QKPMq1sfsYcp3svbC2c+zVlQ6Ll
 mLoTssksXOkgBevVqSiS
 =T7L5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests

# gpg: Signature made Fri 16 Aug 2019 10:29:18 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  file-posix: Handle undetectable alignment
  qemu-img convert: Deprecate using -n and -o together
  block-backend: Queue requests while drained
  mirror: Keep mirror_top_bs drained after dropping permissions
  block: Remove blk_pread_unthrottled()
  iotests: Add test for concurrent stream/commit
  tests: Test mid-drain bdrv_replace_child_noperm()
  tests: Test polling in bdrv_drop_intermediate()
  block: Reduce (un)drains when replacing a child
  block: Keep subtree drained in drop_intermediate
  block: Simplify bdrv_filter_default_perms()
  iotests: Test migration with all kinds of filter nodes
  iotests: Move migration helpers to iotests.py
  iotests/118: Add -blockdev based tests
  iotests/118: Create test classes dynamically
  iotests/118: Test media change for scsi-cd

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16 16:43:46 +01:00
Markus Armbruster
d5938f29fe Clean up inclusion of sysemu/sysemu.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Almost a third of its inclusions are actually superfluous.  Delete
them.  Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.

hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it.  The compiler is cool with that, but include it anyway.

This doesn't reduce actual use much, as it's still included into
widely included headers.  The next commit will tackle that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Kevin Wolf
ffd8e8ffd5 qemu-img convert: Deprecate using -n and -o together
bdrv_create options specified with -o have no effect when skipping image
creation with -n, so this doesn't make sense. Warn against the misuse
and deprecate the combination so we can make it a hard error later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-08-16 10:25:16 +02:00
Andrey Shinkevich
170d3bd341 block: include base when checking image chain for block allocation
This patch is used in the 'block/stream: introduce a bottom node'
that is following. Instead of the base node, the caller may pass
the node that has the base as its backing image to the function
bdrv_is_allocated_above() with a new parameter include_base = true
and get rid of the dependency on the base that may change during
commit/stream parallel jobs. Now, if the specified base is not
found in the backing image chain, the QEMU will abort.

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1559152576-281803-2-git-send-email-andrey.shinkevich@virtuozzo.com
[mreitz: Squashed in the following as a rebase on conflicting patches:]
Message-id: e3cf99ae-62e9-8b6e-5a06-d3c8b9363b85@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02 03:53:04 +02:00
Max Reitz
8eaac025fb qemu-img: Add salvaging mode to convert
This adds a salvaging mode (--salvage) to qemu-img convert which ignores
read errors and treats the respective areas as containing only zeroes.
This can be used for instance to at least partially recover the data
from terminally corrupted qcow2 images.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
Max Reitz
3d96cb91d7 qemu-img: Move quiet into ImgConvertState
Move img_convert()'s quiet flag into the ImgConvertState so it is
accessible by nested functions.  -q dictates that it suppresses anything
but errors, so if those functions want to emit warnings, they need to
query this flag first.  (There currently are no such warnings, but there
will be as of the next patch.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
Max Reitz
f22356d955 qemu-img: Fix options leakage in img_rebase()
img_rebase() can leak a QDict in two occasions.  Fix it.

Coverity: CID 1401416
Fixes: d16699b646
Fixes: 330c729571
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190528195338.12376-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Kevin Wolf
d861ab3acf block: Add BlockBackend.ctx
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).

The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Sam Eiderman
330c729571 qemu-img: rebase: Reuse in-chain BlockDriverState
If a chain was detected, don't open a new BlockBackend from the target
backing file which will create a new BlockDriverState. Instead, create
an empty BlockBackend and attach the already open BlockDriverState.

Permissions for blk_new() were copied from blk_new_open() when
flags = 0.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Signed-off-by: Sagi Amit <sagi.amit@oracle.com>
Co-developed-by: Sagi Amit <sagi.amit@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Message-id: 20190523163337.4497-4-shmuel.eiderman@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-05-28 20:30:55 +02:00
Sam Eiderman
863cc78f1b qemu-img: rebase: Reduce reads on in-chain rebase
In the following case:

(base) A <- B <- C (tip)

when running:

    qemu-img rebase -b A C

QEMU would read all sectors not allocated in the file being rebased (C)
and compare them to the new base image (A), regardless of whether they
were changed or even allocated anywhere along the chain between the new
base and the top image (B). This causes many unneeded reads when
rebasing an image which represents a small diff of a large disk, as it
would read most of the disk's sectors.

Instead, use bdrv_is_allocated_above() to reduce the number of
unnecessary reads.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Message-id: 20190523163337.4497-3-shmuel.eiderman@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-05-28 20:30:55 +02:00
Sam Eiderman
4ebe061726 qemu-img: rebase: Reuse parent BlockDriverState
In safe mode we open the entire chain, including the parent backing
file of the rebased file.
Do not open a new BlockBackend for the parent backing file, which
saves opening the rest of the chain twice, which for long chains
saves many "pricy" bdrv_open() calls.

Permissions for blk_new() were copied from blk_new_open() when
flags = 0.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Signed-off-by: Sagi Amit <sagi.amit@oracle.com>
Co-developed-by: Sagi Amit <sagi.amit@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Message-id: 20190523163337.4497-2-shmuel.eiderman@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-05-28 20:30:55 +02:00
Max Reitz
1c6e877992 qemu-img: Use zero writes after source backing EOF
Past the end of the source backing file, we memset() buf_old to zero, so
it is clearly easy to use blk_pwrite_zeroes() instead of blk_pwrite()
then.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-10 16:45:40 +02:00
Max Reitz
35ddd9300b qemu-img: Allow rebase with no input base
Currently, without -u, you cannot add a backing file to an image when it
currently has none:

$ qemu-img rebase -b base.qcow2 foo.qcow2
qemu-img: Could not open old backing file '': The 'file' block driver
requires a file name

It is really simple to allow this, though (effectively by setting
old_backing_size to 0), so this patch does just that.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-10 16:45:40 +02:00
Stefano Garzarella
97ede57a2b qemu-img: Use IEC binary prefixes for size constants
Using IEC binary prefixes in order to make the code more readable.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-10 16:45:40 +02:00
Vladimir Sementsov-Ogievskiy
265a7e54ef qemu-img: use buffer-based io
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30 15:29:00 +02:00
Max Reitz
f4619af0c1 qemu-img: Make create hint at protocol options
qemu-img create allows giving just a format and "-o help" to get a list
of the options supported by that format.  Users may not realize that the
protocol level may offer even more options, which they only get to see
by specifying a filename.

This patch adds a note to hint at that fact.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30 15:29:00 +02:00
Markus Armbruster
e1ce7d747b block/qapi: Clean up how we print to monitor or stdout
bdrv_snapshot_dump(), bdrv_image_info_specific_dump(),
bdrv_image_info_dump() and their helpers take an fprintf()-like
callback and a FILE * to pass to it.

hmp.c passes monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.

qemu-img.c and qemu-io-cmds.c pass fprintf and stdout.

The type-punning is technically undefined behaviour, but works in
practice.  Clean up: drop the callback, and call qemu_printf()
instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-8-armbru@redhat.com>
2019-04-18 22:18:59 +02:00
Markus Armbruster
e9e1d92d1d qemu-img: Use error_vreport() in error_exit()
error_exit() uses low-level error_printf() to report errors.
Modernize it to use error_vreport().

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190417190641.26814-2-armbru@redhat.com>
2019-04-17 21:21:49 +02:00
Christophe Fergeau
f5852efa29 log: Make glib logging go through QEMU
This commit adds a error_init() helper which calls
g_log_set_default_handler() so that glib logs (g_log, g_warning, ...)
are handled similarly to other QEMU logs. This means they will get a
timestamp if timestamps are enabled, and they will go through the
HMP monitor if one is configured.

This commit also adds a call to error_init() to the binaries
installed by QEMU. Since error_init() also calls error_set_progname(),
this means that *-linux-user, *-bsd-user and qemu-pr-helper messages
output with error_report, info_report, ... will slightly change: they
will be prefixed by the binary name.

glib debug messages are enabled through G_MESSAGES_DEBUG similarly to
the glib default log handler.

At the moment, this change will mostly impact SPICE logging if your
spice version is >= 0.14.1. With older spice versions, this is not going
to work as expected, but will not have any ill effect, so this call is
not conditional on the SPICE version.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-3-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-04-17 19:08:27 +02:00
Nir Soffer
a3d6ae2299 qemu-img: Enable BDRV_REQ_MAY_UNMAP in convert
With Kevin's "block: Fix slow pre-zeroing in qemu-img convert"[1]
(commit c9fdcf202f, 'qemu-img: Use BDRV_REQ_NO_FALLBACK for
pre-zeroing') we skip the pre zero step called like this:

    blk_make_zero(s->target, BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK)

And we write zeroes later using:

    blk_co_pwrite_zeroes(s->target,
                         sector_num << BDRV_SECTOR_BITS,
                         n << BDRV_SECTOR_BITS, 0);

Since we use flags=0, this is translated to NBD_CMD_WRITE_ZEROES with
NBD_CMD_FLAG_NO_HOLE flag, which cause the NBD server to allocated space
instead of punching a hole.

Here is an example failure:

$ dd if=/dev/urandom of=src.img bs=1M count=5
$ truncate -s 50m src.img
$ truncate -s 50m dst.img
$ nbdkit -f -v -e '' -U nbd.sock file file=dst.img

$ ./qemu-img convert -n src.img nbd:unix:nbd.sock

We can see in nbdkit log that it received the NBD_CMD_FLAG_NO_HOLE
(may_trim=0):

nbdkit: file[1]: debug: newstyle negotiation: flags: export 0x4d
nbdkit: file[1]: debug: pwrite count=2097152 offset=0
nbdkit: file[1]: debug: pwrite count=2097152 offset=2097152
nbdkit: file[1]: debug: pwrite count=1048576 offset=4194304
nbdkit: file[1]: debug: zero count=33554432 offset=5242880 may_trim=0
nbdkit: file[1]: debug: zero count=13631488 offset=38797312 may_trim=0
nbdkit: file[1]: debug: flush

And the image became fully allocated:

$ qemu-img info dst.img
virtual size: 50M (52428800 bytes)
disk size: 50M

With this change we see that nbdkit did not receive the
NBD_CMD_FLAG_NO_HOLE (may_trim=1):

nbdkit: file[1]: debug: newstyle negotiation: flags: export 0x4d
nbdkit: file[1]: debug: pwrite count=2097152 offset=0
nbdkit: file[1]: debug: pwrite count=2097152 offset=2097152
nbdkit: file[1]: debug: pwrite count=1048576 offset=4194304
nbdkit: file[1]: debug: zero count=33554432 offset=5242880 may_trim=1
nbdkit: file[1]: debug: zero count=13631488 offset=38797312 may_trim=1
nbdkit: file[1]: debug: flush

And the file is sparse as expected:

$ qemu-img info dst.img
virtual size: 50M (52428800 bytes)
disk size: 5.0M

[1] http://lists.nongnu.org/archive/html/qemu-block/2019-03/msg00761.html

Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-02 12:04:44 +02:00
Eric Blake
30065d1424 qemu-img: Gracefully shutdown when map can't finish
Trying 'qemu-img map -f raw nbd://localhost:10809' causes the
NBD server to output a scary message:

qemu-nbd: Disconnect client, due to: Failed to read request: Unexpected end-of-file before all bytes were read

This is because the NBD client, being remote, has no way to expose a
human-readable map (the --output=json data is fine, however). But
because we exit(1) right after the message, causing the client to
bypass all block cleanup, the server sees the abrupt exit and warns,
whereas it would be silent had the client had a chance to send
NBD_CMD_DISC. Other protocols may have similar cleanup issues, where
failure to blk_unref() could cause unintended effects.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190326184043.7544-1-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2019-03-30 10:06:08 -05:00
Eric Blake
2058c2ad26 qemu-img: Report bdrv_block_status failures
If bdrv_block_status_above() fails, we are aborting the convert
process but failing to print an error message.  Broken in commit
690c7301 (v2.4) when rewriting convert's logic.

Discovered when teaching nbdkit to support NBD_CMD_BLOCK_STATUS, and
accidentally violating the protocol by returning more than one extent
in spite of qemu asking for NBD_CMD_FLAG_REQ_ONE.  The qemu NBD code
should probably handle the server's non-compliance more gracefully
than failing with EINVAL, but qemu-img shouldn't be silently
squelching any block status failures. It doesn't help that qemu 3.1
masks the qemu-img bug with extra noise that the nbd code is dumping
to stderr (that noise was cleaned up in d8b4bad8).

Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190323212639.579-2-eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-03-30 10:06:07 -05:00
Kevin Wolf
c9fdcf202f qemu-img: Use BDRV_REQ_NO_FALLBACK for pre-zeroing
If qemu-img convert sees that the target image isn't zero-initialised
yet, it tries to do an efficient zero write for the whole image first
to save the overhead of repeated explicit zero writes during the
conversion. Obviously, this provides only an advantage if the
pre-zeroing is actually efficient. Otherwise, we can end up writing
zeroes slowly while zeroing out the whole image, and then overwrite the
same blocks again with real data, potentially doubling the written data.

Pass BDRV_REQ_NO_FALLBACK to blk_make_zero() to avoid this case. If we
can't efficiently zero out, we'll instead write explicit zeroes only if
there is no data to be written to a block.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
2019-03-26 11:37:51 +01:00
Andrey Shinkevich
9ac404c523 block: iterate_format with account of whitelisting
bdrv_iterate_format (which is currently only used for printing out the
formats supported by the block layer) doesn't take format whitelisting
into account.

This creates a problem for tests: they enumerate supported formats to
decide which tests to enable, but then discover that QEMU doesn't let
them actually use some of those formats.

To avoid that, exclude formats that are not whitelisted from
enumeration, if whitelisting is in use.  Since we have separate
whitelists for r/w and r/o, take this a parameter to
bdrv_iterate_format, and print two lists of supported formats (r/w and
r/o) in main qemu.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-08 12:26:45 +01:00
Peter Maydell
adf2e451f3 Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
 - bdrv_set_aio_context() related fixes
 - HMP snapshot commands: Use only tag, not the ID to identify snapshots
 - qmeu-img, commit: Error path fixes
 - block/nvme: Build fix for gcc 9
 - MAINTAINERS updates
 - Fix various issues with bdrv_refresh_filename()
 - Fix various iotests
 - Include LUKS overhead in qemu-img measure for qcow2
 - A fix for vmdk's image creation interface
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcc/knAAoJEH8JsnLIjy/WptQP/3F8Lh52H4egXaP7NUUuDjQM
 AhqhuDAp/EZBS+xim9kLTogNJADe/rMWdSX/YB5aLpSPYbjasC66NgaLhd6QewgQ
 VIcsLUdlYAyZ5ZjJytimfMTLwm1X02RmVIe55y52DTY8LlfViZzOlf3qwqPm00ao
 EJB2cl8UJLM+PVEu59cCw3R0/06LY+WIJRB32d3tnCBRTkaJwfR9h4lrp/juVcFZ
 U+2eWU68KMbUHSYiWANowN+KRV3uPY4HVA98v3F0vDmcBxlVHOeBg6S+PcT7tK8p
 huzCMwcdwUyPMJgVs/+WBtUnbG0jN6SHUYmFLz859UMVgBnCw5tzBMf8qw1wOA4A
 Iw+zor27Pxj4IlxcLPp5f97YZ8k9acdMR2VKPH6xLJZ1JF+sKa54RfzESd5EJeIj
 Mfcp773H0lIaWcFJ6RY1F0L1E1ta7QigwNBiWMdYfh0a0EWHnDvGyYeaSPYEQ+rl
 e8bZOcfrYwVI7DTDiZOIkGA9D8DXEPDNp+sl6s1DxeY69D0NNaXTtCPqFNNAbFbd
 20uD7yDRZlWq32cQB/K9D5cSkZRSOzdUpLfLU3nQU2+dz11x6OpM6m7DVboSrztD
 1HtPPDzDEvH5dOP7ibd60s+ntjkSiNfNkUgnuVrBE/d/PocC1eHHpZt5V7f43Ofb
 RxVwH5+smzQ9nsNBfQR0
 =gaah
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface

# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (71 commits)
  iotests: Skip 211 on insufficient memory
  vmdk: false positive of compat6 with hwversion not set
  iotests: add LUKS payload overhead to 178 qemu-img measure test
  qcow2: include LUKS payload overhead in qemu-img measure
  iotests.py: s/_/-/g on keys in qmp_log()
  iotests: Let 045 be run concurrently
  iotests: Filter SSH paths
  iotests.py: Filter filename in any string value
  iotests.py: Add is_str()
  iotests: Fix 207 to use QMP filters for qmp_log
  iotests: Fix 232 for LUKS
  iotests: Remove superfluous rm from 232
  iotests: Fix 237 for Python 2.x
  iotests: Re-add filename filters
  iotests: Test json:{} filenames of internal BDSs
  block: BDS options may lack the "driver" option
  block/null: Generate filename even with latency-ns
  block/curl: Implement bdrv_refresh_filename()
  block/curl: Harmonize option defaults
  block/nvme: Fix bdrv_refresh_filename()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-26 19:04:47 +00:00
Max Reitz
645ae7d88e block: bdrv_get_full_backing_filename_from_...'s ret. val.
Make bdrv_get_full_backing_filename_from_filename() return an allocated
string instead of placing the result in a caller-provided buffer.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:26 +01:00
Max Reitz
f30c66ba6e block: Use bdrv_refresh_filename() to pull
Before this patch, bdrv_refresh_filename() is used in a pushing manner:
Whenever the BDS graph is modified, the parents of the modified edges
are supposed to be updated (recursively upwards).  However, that is
nonviable, considering that we want child changes not to concern
parents.

Also, in the long run we want a pull model anyway: Here, we would have a
bdrv_filename() function which returns a BDS's filename, freshly
constructed.

This patch is an intermediate step.  It adds bdrv_refresh_filename()
calls before every place a BDS.filename value is used.  The only
exceptions are protocol drivers that use their own filename, which
clearly would not profit from refreshing that filename before.

Also, bdrv_get_encrypted_filename() is removed along the way (as a user
of BDS.filename), since it is completely unused.

In turn, all of the calls to bdrv_refresh_filename() before this patch
are removed, because we no longer have to call this function on graph
changes.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:25 +01:00
Daniel P. Berrangé
334c43e2c3 qemu-img: fix error reporting for -object
Error reporting for user_creatable_add_opts_foreach was changed so that
it no longer called 'error_report_err' in:

  commit 7e1e0c1112
  Author: Markus Armbruster <armbru@redhat.com>
  Date:   Wed Oct 17 10:26:43 2018 +0200

    qom: Clean up error reporting in user_creatable_add_opts_foreach()

Some callers were updated to pass in "&error_fatal" but all the ones in
qemu-img were left passing NULL. As a result all errors went to
/dev/null instead of being reported to the user.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-25 15:03:19 +01:00
Daniel Henrique Barboza
8c04093c8c block/snapshot: remove bdrv_snapshot_delete_by_id_or_name
After the previous patch, the only instance of this function left
is inside qemu-img.c.

qemu-img is using it inside the 'img_snapshot' function to delete
snapshots in the SNAPSHOT_DELETE case, based on a "snapshot_name"
string that refers to the tag, not ID, of the QEMUSnapshotInfo struct.
This can be verified by checking the SNAPSHOT_CREATE case that
comes shortly before SNAPSHOT_DELETE. In that case, the same
"snapshot_name" variable is being strcpy to the 'name' field
of the QEMUSnapshotInfo struct sn:

pstrcpy(sn.name, sizeof(sn.name), snapshot_name);

Based on that, it is unlikely that "snapshot_name" might contain
an "id" in SNAPSHOT_DELETE.

This patch changes SNAPSHOT_DELETE to use snapshot_find() and
snapshot_delete() instead of bdrv_snapshot_delete_by_id_or_name.
After that, there is no instances left of bdrv_snapshot_delete_by_id_or_name
in the code, so it is safe to remove it entirely.

Suggested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-25 15:03:18 +01:00
Vladimir Sementsov-Ogievskiy
c075a0af22 qemu-img: use qemu_iovec_init_buf
Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-13-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-13-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22 09:42:13 +00:00
Richard W.M. Jones
d339d766d1 qemu-io: Add generic function for reinitializing optind.
On FreeBSD 11.2:

  $ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd'
  Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write

After main option parsing, we reinitialize optind so we can parse each
command.  However reinitializing optind to 0 does not work on FreeBSD.
What happens when you do this is optind remains 0 after the option
parsing loop, and the result is we try to parse argv[optind] ==
argv[0] == "aio_write" as if it was the first parameter.

The FreeBSD manual page says:

  In order to use getopt() to evaluate multiple sets of arguments, or to
  evaluate a single set of arguments multiple times, the variable optreset
  must be set to 1 before the second and each additional set of calls to
  getopt(), and the variable optind must be reinitialized.

(From the rest of the man page it is clear that optind must be
reinitialized to 1).

The glibc man page says:

  A program that scans multiple argument vectors,  or  rescans  the  same
  vector  more than once, and wants to make use of GNU extensions such as
  '+' and '-' at  the  start  of  optstring,  or  changes  the  value  of
  POSIXLY_CORRECT  between scans, must reinitialize getopt() by resetting
  optind to 0, rather than the traditional value of 1.  (Resetting  to  0
  forces  the  invocation  of  an  internal  initialization  routine that
  rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.)

This commit introduces an OS-portability function called
qemu_reset_optind which provides a way of resetting optind that works
on FreeBSD and platforms that use optreset, while keeping it the same
as now on other platforms.

Note that the qemu codebase sets optind in many other places, but in
those other places it's setting a local variable and not using getopt.
This change is only needed in places where we are using getopt and the
associated global variable optind.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190118101114.11759-2-rjones@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31 00:38:19 +01:00
Max Reitz
3ecd5a4f19 qemu-img: Fix leak
create_opts was leaked here.  This is not too bad since the process is
about to exit anyway, but relying on that does not make the code nicer
to read.

Fixes: d402b6a21a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-21 15:17:46 +01:00
Max Reitz
f0998879e0 qemu-img: Fix typo
Fixes: d402b6a21a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-21 15:17:46 +01:00
Liam Merwick
2e2db26009 qemu-img: assert block_job_get() does not return NULL in img_commit()
Although the function block_job_get() can return NULL, it would be a
serious bug if it did so (because the job yields before executing anything
(if it started successfully); but otherwise, commit_active_start() would
have returned an error).  However, as a precaution, before dereferencing
the 'job' pointer in img_commit() assert it is not NULL.

Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1541453919-25973-4-git-send-email-Liam.Merwick@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-11-12 17:49:21 +01:00
Max Reitz
638987127d option: Make option help nicer to read
This adds some whitespace into the option help (including indentation)
and puts angle brackets around the type names.  Furthermore, the list
name is no longer printed as part of every line, but only once in
advance, and only if the caller did not print a caption already.

This patch also restores the description alignment we had before commit
9cbef9d68e, just at 24 instead of 16 characters like we used to.
This increase is because now we have the type and two spaces of
indentation before the description, and with a usual type name length of
three chracters, this sums up to eight additional characters -- which
means that we now need 24 characters to get the same amount of padding
for most options.  Also, 24 is a third of 80, which makes it kind of a
round number in terminal terms.

Finally, this patch amends the reference output of iotest 082 to match
the changes (and thus makes it pass again).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05 15:17:48 +01:00
Daniel P. Berrangé
8d65a3ccfd qemu-img: fix regression copying secrets during convert
When the convert command is creating an output file that needs
secrets, we need to ensure those secrets are passed to both the
blk_new_open and bdrv_create API calls.

This is done by qemu-img extracting all opts matching the name
suffix "key-secret". Unfortunately the code doing this was run after the
call to bdrv_create(), which meant the QemuOpts it was extracting
secrets from was now empty.

Previously this worked by luks as a bug meant the "key-secret"
parameters were not purged from the QemuOpts. This bug was fixed in

  commit b76b4f6045
  Author: Kevin Wolf <kwolf@redhat.com>
  Date:   Thu Jan 11 16:18:08 2018 +0100

    qcow2: Use visitor for options in qcow2_create()

Exposing the latent bug in qemu-img. This fix simply moves the copying
of secrets to before the bdrv_create() call.

Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-08-15 12:50:39 +02:00
Fam Zheng
e11ce12f5e qemu-img: Add -C option for convert with copy offloading
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Peter Lieven
6360ab278c qemu-img: avoid overflow of min_sparse parameter
the min_sparse convert parameter can overflow (e.g. -S 1024G)
in the conversion from int64_t to int resulting in a negative
min_sparse parameter. Avoid this by limiting the valid parameters
to sane values. In fact anything exceeding the convert buffer size
is also pointless. While at it also forbid values that are non
multiple of 512 to avoid undesired behaviour. For instance, values
between 1 and 511 were legal, but resulted in full allocation.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-23 16:50:43 +02:00
Peter Lieven
8dcd3c9b91 qemu-img: align result of is_allocated_sectors
We currently don't enforce that the sparse segments we detect during convert are
aligned. This leads to unnecessary and costly read-modify-write cycles either
internally in Qemu or in the background on the storage device as nearly all
modern filesystems or hardware have a 4k alignment internally.

This patch modifies is_allocated_sectors so that its *pnum result will always
end at an alignment boundary. This way all requests will end at an alignment
boundary. The start of all requests will also be aligned as long as the results
of get_block_status do not lead to an unaligned offset.

The number of RMW cycles when converting an example image [1] to a raw device that
has 4k sector size is about 4600 4k read requests to perform a total of about 15000
write requests. With this path the additional 4600 read requests are eliminated while
the number of total write requests stays constant.

[1] https://cloud-images.ubuntu.com/releases/16.04/release/ubuntu-16.04-server-cloudimg-amd64-disk1.vmdk

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-12 18:24:08 +02:00
Vladimir Sementsov-Ogievskiy
67b51fb998 block: split flags in copy_range
Pass read flags and write flags separately. This is needed to handle
coming BDRV_REQ_NO_SERIALISING clearly in following patches.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 13:04:25 +02:00
Vladimir Sementsov-Ogievskiy
88481329c0 qemu-img: allow compressed not-in-order writes
No reason to forbid them, and they are needed to improve performance
with compress-threads in further patches.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-05 10:17:59 +02:00
Eric Blake
e0b371ed5e qemu-img: Fix assert when mapping unaligned raw file
Commit a290f085 exposed a latent bug in qemu-img map introduced
during the conversion of block status to be byte-based.  Earlier in
commit 5e344dd8, the internal interface get_block_status() switched
to take byte-based parameters, but still called a sector-based
block layer function; as such, rounding was added in the lone
caller to obey the contract.  However, commit 237d78f8 changed
get_block_status() to truly be byte-based, at which point rounding
to sector boundaries can result in calling bdrv_block_status() with
'bytes == 0' (a coding error) when the boundary between data and a
hole falls mid-sector (true for the past-EOF implicit hole present
in POSIX files).  Fix things by removing the rounding that is now
no longer necessary.

See also https://bugzilla.redhat.com/1589738

Fixes: 237d78f8
Reported-by: Dan Kenigsberg <danken@redhat.com>
Reported-by: Nir Soffer <nsoffer@redhat.com>
Reported-by: Maor Lipchuk <mlipchuk@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Thomas Huth
46e8d272ba qemu-img: Remove deprecated -s snapshot_id_or_name option
It has been marked as deprecated since QEMU v2.0 already, so it
is time now to finally remove it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1528288551-31641-1-git-send-email-thuth@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Max Reitz
351c8efff9 qemu-img: Special post-backing convert handling
Currently, qemu-img convert writes zeroes when it reads zeroes.
Sometimes it does not because the target is initialized to zeroes
anyway, so we do not need to overwrite (and thus potentially allocate)
it.  This is never the case for targets with backing files, though.  But
even they may have an area that is initialized to zeroes, and that is
the area past the end of the backing file (if that is shorter than the
overlay).

So if the target format's unallocated blocks are zero and there is a gap
between the target's backing file's end and the target's end, we do not
have to explicitly write zeroes there.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1527898
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501165750.19242-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Max Reitz
d16699b646 qemu-img: Resolve relative backing paths in rebase
Currently, rebase interprets a relative path for the new backing image
as follows:
(1) Open the new backing image with the given relative path (thus relative to
    qemu-img's working directory).
(2) Write it directly into the overlay's backing path field (thus
    relative to the overlay).

If the overlay is not in qemu-img's working directory, both will be
different interpretations, which may either lead to an error somewhere
(either rebase fails because it cannot open the new backing image, or
your overlay becomes unusable because its backing path does not point to
a file), or, even worse, it may result in your rebase being performed
for a different backing file than what your overlay will point to after
the rebase.

Fix this by interpreting the target backing path as relative to the
overlay, like qemu-img does everywhere else.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1569835
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509182002.8044-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Max Reitz
d402b6a21a qemu-img: Recognize no creation support in -o help
The only users of print_block_option_help() are qemu-img create and
qemu-img convert for the output image, so this function is always used
for image creation (it used to be used for amendment also, but that is
no longer the case).

So if image creation is not supported by either the format or the
protocol, there is no need to print any option description, because the
user cannot create an image like this anyway.

This also fixes an assertion failure:

    $ qemu-img create -f bochs -o help
    Supported options:
    qemu-img: util/qemu-option.c:219:
    qemu_opts_print_help: Assertion `list' failed.
    [1]    24831 abort (core dumped)  qemu-img create -f bochs -o help

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Max Reitz
5164135142 qemu-img: Add print_amend_option_help()
The more generic print_block_option_help() function is not really
suitable for qemu-img amend, for a couple of reasons:
(1) We do not need to append the protocol-level options, as amendment
    happens only on one node and does not descend downwards to its
    children.
(2) print_block_option_help() says those options are "supported".  For
    option amendment, we do not really know that.  So this new function
    explicitly says that those options are the creation options, and not
    all of them may be supported.
(3) If the driver does not support option amendment, we should not print
    anything (except for an error message that amendment is not
    supported).

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Max Reitz
7f3fb00136 qemu-option: Pull out "Supported options" print
It really is up to the caller to decide what this list of options means.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Max Reitz
d1402b5026 block: Add Error parameter to bdrv_amend_options
Looking at the qcow2 code that is riddled with error_report() calls,
this is really how it should have been from the start.

Along the way, turn the target_version/current_version comparisons at
the beginning of qcow2_downgrade() into assertions (the caller has to
make sure these conditions are met), and rephrase the error message on
using compat=1.1 to get refcount widths other than 16 bits.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509210023.20283-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Max Reitz
1f996683ad qemu-img: Amendment support implies create_opts
Instead of checking whether a driver has a non-NULL create_opts we
should check whether it supports image amendment in the first place.  If
it does, it must have create_opts.

On the other hand, if it does not have create_opts (so it does not
support amendment either), the error message "does not support any
options" is a bit useless.  Stating clearly that the driver has no
amendment support whatsoever is probably better.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Fam Zheng
ee5306d092 qemu-img: Convert with copy offloading
The new blk_co_copy_range interface offers a more efficient way in the
case of network based storage. Make use of it to allow faster convert
operation.

Since copy offloading cannot do zero detection ('-S') and compression
(-c), only try it when these options are not used.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-11-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01 14:41:48 +01:00
Kevin Wolf
30a5c887bf job: Move progress fields to Job
BlockJob has fields .offset and .len, which are actually misnomers today
because they are no longer tied to block device sizes, but just progress
counters. As such they make a lot of sense in generic Jobs.

This patch moves the fields to Job and renames them to .progress_current
and .progress_total to describe their function better.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
df956ae201 job: Add job_is_ready()
Instead of having a 'bool ready' in BlockJob, add a function that
derives its value from the job status.

At the same time, this fixes the behaviour to match what the QAPI
documentation promises for query-block-job: 'true if the job may be
completed'. When the ready flag was introduced in commit ef6dbf1e46,
the flag never had to be reset to match the description because after
being ready, the jobs would immediately complete and disappear.

Job transactions and manual job finalisation were introduced only later.
With these changes, jobs may stay around even after having completed
(and they are not ready to be completed a second time), however their
patches forgot to reset the ready flag.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
3d70ff53b6 job: Move completion and cancellation to Job
This moves the top-level job completion and cancellation functions from
BlockJob to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
4ad351819b job: Move single job finalisation to Job
This moves the finalisation of a single job from BlockJob to Job.

Some part of this code depends on job transactions, and job transactions
call this code, we introduce some temporary calls from Job functions to
BlockJob ones. This will be fixed once transactions move to Job, too.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
bb02b65c7d job: Move BlockJobCreateFlags to Job
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
dbe5e6c1f7 job: Replace BlockJob.completed with job_is_completed()
Since we introduced an explicit status to block job, BlockJob.completed
is redundant because it can be derived from the status. Remove the field
from BlockJob and add a function to derive it from the status at the Job
level.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
80fa2c756b job: Add reference counting
This moves reference counting from BlockJob to Job.

In order to keep calling the BlockJob cleanup code when the job is
deleted via job_unref(), introduce a new JobDriver.free callback. Every
block job must use block_job_free() for this callback, this is asserted
in block_job_create().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23 14:30:49 +02:00
John Snow
183861456d qemu-img: remove references to GEN_DOCS
Nothing seemingly uses this.
(jcody: commit 77bd1119ba even mentions that it appears unused)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-20 08:35:54 +03:00
Max Reitz
4615f87832 qemu-img: Use only string options in img_open_opts
img_open_opts() takes a QemuOpts and converts them to a QDict, so all
values therein are strings.  Then it may try to call qdict_get_bool(),
however, which will fail with a segmentation fault every time:

$ ./qemu-img info -U --image-opts \
    driver=file,filename=/dev/null,force-share=off
[1]    27869 segmentation fault (core dumped)  ./qemu-img info -U
--image-opts driver=file,filename=/dev/null,force-share=off

Fix this by using qdict_get_str() and comparing the value as a string.
Also, when adding a force-share value to the QDict, add it as a string
so it fits the rest of the dict.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-15 16:15:21 +02:00
Max Reitz
5279b30392 qemu-img: Check post-truncation size
Some block drivers (iscsi and file-posix when dealing with device files)
do not actually support truncation, even though they provide a
.bdrv_truncate() method and will happily return success when providing a
new size that does not exceed the current size.  This is because these
drivers expect the user to resize the image outside of qemu and then
provide qemu with that information through the block_resize command
(compare cb1b83e740).

Of course, anyone using qemu-img resize will find that behavior useless.
So we should check the actual size of the image after the supposedly
successful truncation took place, emit an error if nothing changed and
emit a warning if the target size was not met.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1523065
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421163957.29872-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-15 16:15:21 +02:00
Marc-André Lureau
cb3e7f08ae qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked().  Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Thomas Huth
7e563bfb8a Polish the version strings containing the package version
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :

 $ qemu-system-s390x --version
 QEMU emulator version 2.11.50(foo)

But the space is included when building without that option
when building from a git checkout:

 $ qemu-system-s390x --version
 QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)

The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.

Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12 16:12:47 +01:00
Peter Maydell
58e2e17dba Block layer patches
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJanYJPAAoJEH8JsnLIjy/WxjUQAJA+DTOmGXvaNpMs65BrU79K
 /r/iGVrzHv/RMLmrWMnqj96W9SnpMuiAP9hVLNsekqClY9q4ME4DpGcXhWfhSvF5
 FC51ehvFJdfo8cPorsevcqNj60iWebjcx3lFfUq2606UOyYih3oijYxr6gSwWbRc
 GAgdGMqsvGYpzgqAQVEWHUhaX0La49/OzY42aR+E+LCBNfTYvlydvyoc+tUTdIpW
 1eM/ASGndGsN0Cf2vxlbKgJ0/P6v+cRZuuIDhKZqre+YG+yM+pq7yZb+o7nf/P36
 TPR93BsT7FSVAizRK7VFRuPIynHpiaxYygrJERCXF0sxsV4OlKjpmt/uUPamWFh+
 46Jx2NK1AuAx87BdErgmA119ObO3oAPxK0+2p981obb6SphTbbPxDj6SOlYCt4mJ
 mhff4JtIiwCmDSckAwd2mkBI1Tvl9qqcELrpyd2t2eU4ec2vf7fPd85EsK/Mq6Kr
 dbfqFvjNaaMxChoqFgkHAveYJ7zYqRFI2IY5o9c1QyZehCGPWjScxHXZZYdpDl59
 YF9DkYQDOyvEX2jmMECaO1r/0nnO+BqQHu5ItJuTte9rjP9Q0do3iBISiIefewtf
 yji6/QNn2hFrnr1HPAwLFFC3kPgc8Mq8mIUb53j8vG/01KhVRCcnJm2K6D4IUwLZ
 S6ZnQJB97eE4y7YR5dNt
 =2axz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (38 commits)
  block: Fix NULL dereference on empty drive error
  qcow2: Replace align_offset() with ROUND_UP()
  block/ssh: Add basic .bdrv_truncate()
  block/ssh: Make ssh_grow_file() blocking
  block/ssh: Pull ssh_grow_file() from ssh_create()
  qemu-img: Make resize error message more general
  qcow2: make qcow2_co_create2() a coroutine_fn
  block: rename .bdrv_create() to .bdrv_co_create_opts()
  Revert "IDE: Do not flush empty CDROM drives"
  block: test blk_aio_flush() with blk->root == NULL
  block: add BlockBackend->in_flight counter
  block: extract AIO_WAIT_WHILE() from BlockDriverState
  aio: rename aio_context_in_iothread() to in_aio_context_home_thread()
  docs: document how to use the l2-cache-entry-size parameter
  specs/qcow2: Fix documentation of the compressed cluster descriptor
  iotest 033: add misaligned write-zeroes test via truncate
  block: fix write with zero flag set and iovector provided
  block: Drop unused .bdrv_co_get_block_status()
  vvfat: Switch to .bdrv_co_block_status()
  vpc: Switch to .bdrv_co_block_status()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	include/block/block.h
2018-03-06 11:20:44 +00:00
Markus Armbruster
9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Max Reitz
be8fbd4763 qemu-img: Make resize error message more general
The issue:

  $ qemu-img resize -f qcow2 foo.qcow2
  qemu-img: Expecting one image file name
  Try 'qemu-img --help' for more information

So we gave an image file name, but we omitted the length.  qemu-img
thinks the last argument is always the size and removes it immediately
from argv (by decrementing argc), and tries to verify that it is a valid
size only at a later point.

So we do not actually know whether that last argument we called "size"
is indeed a size or whether the user instead forgot to specify that size
but did give a file name.

Therefore, the error message should be more general.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1523458
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180205162745.23650-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-03-02 18:39:56 +01:00
Markus Armbruster
bd006b9818 Include qapi/qmp/qbool.h exactly where needed
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
fc81fa1eb0 Include qapi/qmp/qstring.h exactly where needed
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
452fcdbc49 Include qapi/qmp/qdict.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
a82400cf5c Drop superfluous includes of qapi/qmp/qerror.h
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
2018-02-09 13:51:35 +01:00
Fam Zheng
79d465839f qemu-img: Map bench buffer
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180116060901.17413-7-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08 09:22:03 +08:00
Kevin Wolf
0b62bcbc61 block: Add errp to bdrv_snapshot_goto()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2017-11-21 14:48:22 +01:00
Eric Blake
033d9fc203 qemu-img: Change img_compare() to be byte-based
In the continuing quest to make more things byte-based, change
the internal iteration of img_compare().  We can finally drop the
TODO assertions added earlier, now that the entire algorithm is
byte-based and no longer has to shift from bytes to sectors.

Most of the change is mechanical ('total_sectors' becomes
'total_size', 'sector_num' becomes 'offset', 'nb_sectors' becomes
'chunk', 'progress_base' goes from sectors to bytes); some of it
is also a cleanup (sectors_to_bytes() is now unused, loss of
variable 'count' added earlier in commit 51b0a488).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
415362873f qemu-img: Change img_rebase() to be byte-based
In the continuing quest to make more things byte-based, change
the internal iteration of img_rebase().  We can finally drop the
TODO assertion added earlier, now that the entire algorithm is
byte-based and no longer has to shift from bytes to sectors.

Most of the change is mechanical ('num_sectors' becomes 'size',
'sector' becomes 'offset', 'n' goes from sectors to bytes); some
of it is also a cleanup (use of MIN() instead of open-coding,
loss of variable 'count' added earlier in commit d6a644bb).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
dc61cd3b14 qemu-img: Change compare_sectors() to be byte-based
In the continuing quest to make more things byte-based, change
compare_sectors(), renaming it to compare_buffers() in the
process.  Note that one caller (qemu-img compare) only cares
about the first difference, while the other (qemu-img rebase)
cares about how many consecutive sectors have the same
equal/different status; however, this patch does not bother to
micro-optimize the compare case to avoid the comparisons of
sectors beyond the first mismatch.  Both callers are always
passing valid buffers in, so the initial check for buffer size
can be turned into an assertion.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
c41508edc6 qemu-img: Change check_empty_sectors() to byte-based
Continue on the quest to make more things byte-based instead of
sector-based.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
0608e40e8e qemu-img: Drop redundant error message in compare
If a read error is encountered during 'qemu-img compare', we
were printing the "Error while reading offset ..." message twice;
this was because our helper function was awkward, printing output
on some but not all paths.  Fix it to consistently report errors
on all paths, so that the callers do not risk a redundant message,
and update the testsuite for the improved output.

Further simplify the code by hoisting the conversion from an error
message to an exit code into the helper function, rather than
repeating that logic at all callers (yes, the helper function is
now less generic, but it's a net win in lines of code).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
debb38a4ce qemu-img: Add find_nonzero()
During 'qemu-img compare', when we are checking that an allocated
portion of one file is all zeros, we don't need to waste time
computing how many additional sectors after the first non-zero
byte are also non-zero.  Create a new helper find_nonzero() to do
the check for a first non-zero sector, and rebase
check_empty_sectors() to use it.

The new interface intentionally uses bytes in its interface, even
though it still crawls the buffer a sector at a time; it is robust
to a partial sector at the end of the buffer.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
391cb1aaca qemu-img: Speed up compare on pre-allocated larger file
Compare the following images with all-zero contents:
$ truncate --size 1M A
$ qemu-img create -f qcow2 -o preallocation=off B 1G
$ qemu-img create -f qcow2 -o preallocation=metadata C 1G

On my machine, the difference is noticeable for pre-patch speeds,
with more than an order of magnitude in difference caused by the
choice of preallocation in the qcow2 file:

$ time ./qemu-img compare -f raw -F qcow2 A B
Warning: Image size mismatch!
Images are identical.

real	0m0.014s
user	0m0.007s
sys	0m0.007s

$ time ./qemu-img compare -f raw -F qcow2 A C
Warning: Image size mismatch!
Images are identical.

real	0m0.341s
user	0m0.144s
sys	0m0.188s

Why? Because bdrv_is_allocated() returns false for image B but
true for image C, throwing away the fact that both images know
via lseek(SEEK_HOLE) that the entire image still reads as zero.
From there, qemu-img ends up calling bdrv_pread() for every byte
of the tail, instead of quickly looking for the next allocation.
The solution: use block_status instead of is_allocated, giving:

$ time ./qemu-img compare -f raw -F qcow2 A C
Warning: Image size mismatch!
Images are identical.

real	0m0.014s
user	0m0.011s
sys	0m0.003s

which is on par with the speeds for no pre-allocation.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
7daddc615e qemu-img: Simplify logic in img_compare()
As long as we are querying the status for a chunk smaller than
the known image size, we are guaranteed that a successful return
will have set pnum to a non-zero size (pnum is zero only for
queries beyond the end of the file).  Use that to slightly
simplify the calculation of the current chunk size being compared.
Likewise, we don't have to shrink the amount of data operated on
until we know we have to read the file, and therefore have to fit
in the bounds of our buffer.  Also, note that 'total_sectors_over'
is equivalent to 'progress_base'.

With these changes in place, sectors_to_process() is now dead code,
and can be removed.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
3182664220 block: Convert bdrv_get_block_status_above() to bytes
We are gradually moving away from sector-based interfaces, towards
byte-based.  In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.

Changing the name of the function from bdrv_get_block_status_above()
to bdrv_block_status_above() ensures that the compiler enforces that
all callers are updated.  Likewise, since it a byte interface allows
an offset mapping that might not be sector aligned, split the mapping
out of the return value and into a pass-by-reference parameter.  For
now, the io.c layer still assert()s that all uses are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status in the drivers.

For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), plus
updates for the new split return interface.  But some code,
particularly bdrv_block_status(), gets a lot simpler because it no
longer has to mess with sectors.  Likewise, mirror code no longer
computes s->granularity >> BDRV_SECTOR_BITS, and can therefore drop
an assertion about alignment because the loop no longer depends on
alignment (never mind that we don't really have a driver that
reports sub-sector alignments, so it's not really possible to test
the effect of sub-sector mirroring).  Fix a neighboring assertion to
use is_power_of_2 while there.

For ease of review, bdrv_get_block_status() was tackled separately.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
237d78f8fc block: Convert bdrv_get_block_status() to bytes
We are gradually moving away from sector-based interfaces, towards
byte-based.  In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.

Changing the name of the function from bdrv_get_block_status() to
bdrv_block_status() ensures that the compiler enforces that all
callers are updated.  For now, the io.c layer still assert()s that
all callers are sector-aligned, but that can be relaxed when a later
patch implements byte-based block status in the drivers.

There was an inherent limitation in returning the offset via the
return value: we only have room for BDRV_BLOCK_OFFSET_MASK bits, which
means an offset can only be mapped for sector-aligned queries (or,
if we declare that non-aligned input is at the same relative position
modulo 512 of the answer), so the new interface also changes things to
return the offset via output through a parameter by reference rather
than mashed into the return value.  We'll have some glue code that
munges between the two styles until we finish converting all uses.

For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), coupled
with the tweak in calling convention.  But some code, particularly
bdrv_is_allocated(), gets a lot simpler because it no longer has to
mess with sectors.

For ease of review, bdrv_get_block_status_above() will be tackled
separately.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
5e344dd8c2 qemu-img: Switch get_block_status() to byte-based
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Continue by converting
an internal function (no semantic change), and simplifying its
caller accordingly.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Eric Blake
298a1665a2 block: Allow NULL file for bdrv_get_block_status()
Not all callers care about which BDS owns the mapping for a given
range of the file.  This patch merely simplifies the callers by
consolidating the logic in the common call point, while guaranteeing
a non-NULL file to all the driver callbacks, for no semantic change.
The only caller that does not care about pnum is bdrv_is_allocated,
as invoked by vvfat; we can likewise add assertions that the rest
of the stack does not have to worry about a NULL pnum.

Furthermore, this will also set the stage for a future cleanup: when
a caller does not care about which BDS owns an offset, it would be
nice to allow the driver to optimize things to not have to return
BDRV_BLOCK_OFFSET_VALID in the first place.  In the case of fragmented
allocation (for example, it's fairly easy to create a qcow2 image
where consecutive guest addresses are not at consecutive host
addresses), the current contract requires bdrv_get_block_status()
to clamp *pnum to the limit where host addresses are no longer
consecutive, but allowing a NULL file means that *pnum could be
set to the full length of known-allocated data.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00
Pavel Butsykin
4ffca8904a qemu-img: add --shrink flag for resize
The flag is additional precaution against data loss. Perhaps in the future the
operation shrink without this flag will be blocked for all formats, but for now
we need to maintain compatibility with raw.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-2-pbutsykin@virtuozzo.com
[mreitz: Added a missing space to a warning]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-09-26 15:00:32 +02:00
Marc-André Lureau
f7abe0ecd4 qapi: Change data type of the FOO_lookup generated for enum FOO
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.

A future patch will generate enums with "holes".  NULL-termination
will cease to work then.

To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.

The sentinel will be dropped next.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
2017-09-04 13:09:13 +02:00
Markus Armbruster
5b5f825d44 qapi: Generate FOO_str() macro for QAPI enum FOO
The next commit will put it to use.  May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04 13:09:13 +02:00
Markus Armbruster
06c60b6c46 qapi: Drop superfluous qapi_enum_parse() parameter max
The lookup tables have a sentinel, no need to make callers pass their
size.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
2017-09-04 13:09:13 +02:00
Eric Blake
f5048cb751 maint: Include bug-reporting info in --help output
These days, many programs are including a bug-reporting address,
or better yet, a link to the project web site, at the tail of
their --help output.  However, we were not very consistent at
doing so: only qemu-nbd and qemu-qa mentioned anything, with the
latter pointing to an individual person instead of the project.

Add a new #define that sets up a uniform string, mentioning both
bug reporting instructions and overall project details, and which
a downstream vendor could tweak if they want bugs to go to a
downstream database.  Then use it in all of our binaries which
have --help output.

The canned text intentionally references http:// instead of https://
because our https website currently causes certificate errors in
some browsers.  That can be tweaked later once we have resolved the
web site issued.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170803163353.19558-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-08 17:28:53 +02:00
Eric Blake
c2a3d7dad2 maint: Reorder include directives for qemu-{nbd, io}
HACKING recommends listing system includes right after osdep.h,
and before any other in-project headers.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170721135047.25005-3-eblake@redhat.com>
2017-07-24 08:53:08 -05:00
John Snow
6e6e55f5c2 qemu-img: Check for backing image if specified during create
Or, rather, force the open of a backing image if one was specified
for creation. Using a similar -unsafe option as rebase, allow qemu-img
to ignore the backing file validation if possible.

It may not always be possible, as in the existing case when a filesize
for the new image was not specified.

This is accomplished by shifting around the conditionals in
bdrv_img_create, such that a backing file is always opened unless we
provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag
when -u is provided to create.

Sorry for the heinous looking diffstat, but it's mostly whitespace.

Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-18 15:27:37 +02:00
Peter Maydell
49bcce4b9c QAPI patches for 2017-07-12
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZZkk4AAoJEDhwtADrkYZTK7AP/1gMvj+5uFv83U5cPF5zGDtB
 I8tdw06lQioJsEuv3/n1M1yh34AgyxfVgGCGX2VT1/9DKV7KSKcXf930ihBagoMY
 p9lppZ+ElcZ5WE9mfl/bYpJefEnS8PrCa9jieSd0MW34fCKR80e1OE9u8j0lMdSZ
 KgsCy7cyV8j4Sl2MF/XkhwXhEw70p4IDL7nPSn1vJuE2pHL6HeKx/VLdKRCgvJq3
 ov9SRxAtXKAO9vcEUqzoVpcSXjh8rDtP1FkCsjQGg4xZvVi4UjK7V6hy4EWu72hk
 9Q6TZEukPW8E2D/O+P0+/PGAu1vFeTwbaOYNmpIv43r9Rb5uI4LUgBi3swBa1xH+
 GYWDbqorIjzRoNQK0Vs81daZrQJ9fZBkeFAksX8u2qvJE+mzV+m7JOnc85+N/WiT
 KLOWY5CjpeFbB+cEte7J+phNKqGArsPnnRwyhdLfvLUnpTANn+X7yh53yzgQjj54
 65dn+N60OrzCTH553OL88Rwqu5IiEXwW8DppY+Rtl8vVMWmGeLCvdCz1/oOavqe1
 hSMmGsgZD25BCCfZ2d0iH/MGc/rw+b9/wC8ekDUf8d+Ns6o5pgkG+SqjmCU4iNc2
 QIVBiAlLMFLTAWQk5JoqJvVNTXL+QtJeb5+qZ/VfAYE+Y969koX1EnNmmkGUC1TZ
 pnZx1zeul1KMERPWK1Uh
 =FPLR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-07-12' into staging

QAPI patches for 2017-07-12

# gpg: Signature made Wed 12 Jul 2017 17:07:20 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-07-12:
  scripts: use build_ prefix for string not piped through cgen()
  qobject: Update coccinelle script to catch Q{INC, DEC}REF
  qobject: Catch another straggler for use of qdict_put_str()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-13 16:56:06 +01:00
Eric Blake
187f47e947 qobject: Catch another straggler for use of qdict_put_str()
Dan's addition of key-secret improvements in commit 29cf9336 was
developed prior to the addition of QDict scalar insertion macros,
but merged after the general cleanup in commit 46f5ac20.
Patch created mechanically by rerunning:
  spatch --sp-file scripts/coccinelle/qobject.cocci \
         --macro-file scripts/cocci-macro-file.h --dir . --in-place

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20170624181008.25497-2-eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 17:51:54 +02:00
Max Reitz
dc5f690b97 qemu-img: Expose PreallocMode for resizing
Add a --preallocation command line option to qemu-img resize which can
be used to set the PreallocMode parameter of blk_truncate().

While touching this code, fix the fact that we did not handle errors
returned by blk_getlength().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613202107.10125-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Max Reitz
3a691c50f1 block: Add PreallocMode to blk_truncate()
blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Stefan Hajnoczi
fd03c2b8fb qemu-img: add measure subcommand
The measure subcommand calculates the size required by a new image file.
This can be used by users or management tools that need to allocate
space on an LVM volume, SAN LUN, etc before creating or converting an
image file.

Suggested-by: Maor Lipchuk <mlipchuk@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-8-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Daniel P. Berrange
788cf9f8c8 block: rip out all traces of password prompting
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Daniel P. Berrange
0cb8d47ba9 block: deprecate "encryption=on" in favor of "encrypt.format=aes"
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.

This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.

e.g. the preferred syntax is now

  qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:55 +02:00
Eric Blake
51b0a48888 block: Make bdrv_is_allocated_above() byte-based
We are gradually moving away from sector-based interfaces, towards
byte-based.  In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.

Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated.  For now,
the io.c layer still assert()s that all callers are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status.  Therefore, for the most part this patch is just the
addition of scaling at the callers followed by inverse scaling at
bdrv_is_allocated().  But some code, particularly stream_run(),
gets a lot simpler because it no longer has to mess with sectors.
Leave comments where we can further simplify by switching to
byte-based iterations, once later patches eliminate the need for
sector-aligned operations.

For ease of review, bdrv_is_allocated() was tackled separately.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10 13:18:07 +02:00
Eric Blake
d6a644bbfe block: Make bdrv_is_allocated() byte-based
We are gradually moving away from sector-based interfaces, towards
byte-based.  In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.

Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated.  For now,
the io.c layer still assert()s that all callers are sector-aligned
on input and that *pnum is sector-aligned on return to the caller,
but that can be relaxed when a later patch implements byte-based
block status.  Therefore, this code adds usages like
DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned
values, where the call might reasonbly give non-aligned results
in the future; on the other hand, no rounding is needed for callers
that should just continue to work with byte alignment.

For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_is_allocated().  But
some code, particularly bdrv_commit(), gets a lot simpler because it
no longer has to mess with sectors; also, it is now possible to pass
NULL if the caller does not care how much of the image is allocated
beyond the initial offset.  Leave comments where we can further
simplify once a later patch eliminates the need for sector-aligned
requests through bdrv_is_allocated().

For ease of review, bdrv_is_allocated_above() will be tackled
separately.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10 13:18:07 +02:00
Daniel P. Berrange
6b4df54833 qemu-img: drop -e and -6 options from the 'create' & 'convert' commands
The '-e' and '-6' options to the 'create' & 'convert' commands were
"deprecated" in favour of the more generic '-o' option many years ago:

  commit eec77d9e71
  Author: Jes Sorensen <Jes.Sorensen@redhat.com>
  Date:   Tue Dec 7 17:44:34 2010 +0100

    qemu-img: Deprecate obsolete -6 and -e options

Except this was never actually a deprecation, which would imply giving
the user a warning while the functionality continues to work for a
number of releases before eventual removal. Instead the options were
immediately turned into an error + exit. Given that the functionality
is already broken, there's no point in keeping these psuedo-deprecation
messages around any longer.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10 13:18:06 +02:00
Stefan Hajnoczi
2a24570909 qemu-img: don't shadow opts variable in img_dd()
It's confusing when two different variables have the same name in one
function.

Cc: Reda Sallahi <fullmanet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170619150002.3033-1-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-26 14:54:46 +02:00
sochin.jiang
4172a00373 fix: avoid an infinite loop or a dangling pointer problem in img_commit
img_commit could fall into an infinite loop calling run_block_job() if
its blockjob fails on any I/O error, fix this already known problem.

Signed-off-by: sochin.jiang <sochin.jiang@huawei.com>
Message-id: 1497509253-28941-1-git-send-email-sochin.jiang@huawei.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-26 14:54:46 +02:00
Stefan Hajnoczi
0748b3526e Block layer patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZLDGTAAoJEH8JsnLIjy/WjY0P/jtXF+SQKs9H695Uy+U+EUr5
 9w+lYTfjHXTUx9F5AKT4OAMww/uWSG5ywG8FZD8AJZyt1B8piDrSA7sW5YYgWCV4
 XD1HMzN6pasVGrchzgfBSW/K9BgUlvBEjqFrLCNVii0osa68J7vX3uJsLyRA+yPo
 ijFseJaB/b0KnAPG9JqHXc4DVQgU2IhZH3ZsgE6Utb+KUrm8/veiORhWQboBbfCW
 eyTF+YWee/rI+up4nKn9+Le57EUXWr3Y50BBxFZw1/4wQbv0WEhOIbl/Z4ggxNRR
 VoyXGMqOIZFlGQ7bGxDawuEwGKfcOFFEHj3rhPrs7RPnod/6X8Vxm0rAr2GNZoOW
 9tLMQKe4HLo3kVwX65AhzWd/WMukAd0MC/0oaULOjiAEdlWjflyEhx9H9uYefl5x
 kn77ZqQqIEL4aCYRBLJn9oJV3CIZbSd6cuKC9UPuXAwD8XDWTXUzT/aDMJUnfij7
 vhS1qks1Wyk37wIjTuuERwrr0K6y8e3De30NeU6LqQuzXvJ1MYSp49BA1FCgHfmT
 x5RWbTSjLdjZiIo7biE2dSwdOtsxsnuxX19utqfGqOmegNU7LykRtu6mFh9kJhNe
 5ladt1Mu//puZLQ/q4RH/J0pwkuS/OVrS3LBobcggPGHhUIiHhdNUI73bb7BK0+9
 ME5DGLm4/c/REB3Lidr9
 =kkU0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Mon 29 May 2017 03:34:59 PM BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* kwolf/tags/for-upstream:
  block/file-*: *_parse_filename() and colons
  block: Fix backing paths for filenames with colons
  block: Tweak error message related to qemu-img amend
  qemu-img: Fix leakage of options on error
  qemu-img: copy *key-secret opts when opening newly created files
  qemu-img: introduce --target-image-opts for 'convert' command
  qemu-img: fix --image-opts usage with dd command
  qemu-img: add support for --object with 'dd' command
  qemu-img: Fix documentation of convert
  qcow2: remove extra local_error variable
  mirror: Drop permissions on s->target on completion
  nvme: Add support for Controller Memory Buffers
  iotests: 147: Don't test inet6 if not available
  qemu-iotests: Test streaming with missing job ID
  stream: fix crash in stream_start() when block_job_create() fails

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-30 14:15:15 +01:00
Fam Zheng
adb998c12a qemu-img: Fix leakage of options on error
Reported by Coverity.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170515141014.25793-1-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-29 15:39:54 +02:00
Daniel P. Berrange
29cf933635 qemu-img: copy *key-secret opts when opening newly created files
The qemu-img dd/convert commands will create an image file and
then try to open it. Historically it has been possible to open
new files without passing any options. With encrypted files
though, the *key-secret options are mandatory, so we need to
provide those options when opening the newly created file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170515164712.6643-5-berrange@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-29 15:39:54 +02:00
Daniel P. Berrange
305b4c60f2 qemu-img: introduce --target-image-opts for 'convert' command
The '--image-opts' flag indicates whether the source filename
includes options. The target filename has to remain in the
plain filename format though, since it needs to be passed to
bdrv_create().  When using --skip-create though, it would be
possible to use image-opts syntax. This adds --target-image-opts
to indicate that the target filename includes options. Currently
this mandates use of the --skip-create flag too.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170515164712.6643-4-berrange@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-29 15:39:54 +02:00
Daniel P. Berrange
ea204ddac7 qemu-img: fix --image-opts usage with dd command
The --image-opts flag can only be used to affect the parsing
of the source image. The target image has to be specified in
the traditional style regardless, since it needs to be passed
to the bdrv_create() API which does not support the new style
opts.

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170515164712.6643-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-29 15:39:53 +02:00
Daniel P. Berrange
83d4bf943e qemu-img: add support for --object with 'dd' command
The qemu-img dd command added --image-opts support, but missed
the corresponding --object support. This prevented passing
secrets (eg auth passwords) needed by certain disk images.

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170515164712.6643-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-29 15:39:53 +02:00
Eric Blake
579cf1d104 block: Use QDict helpers for --force-share
Fam's addition of --force-share in commits 459571f7 and 335e9937
were developed prior to the addition of QDict scalar insertion
macros, but merged after the general cleanup in commit 46f5ac20.
Patch created mechanically by rerunning:

 spatch --sp-file scripts/coccinelle/qobject.cocci \
        --macro-file scripts/cocci-macro-file.h --dir . --in-place

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515195439.17677-1-eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23 13:28:17 +02:00
Anton Nefedov
b91127edd0 qemu-img: wait for convert coroutines to complete
On error path (like i/o error in one of the coroutines), it's required to
  - wait for coroutines completion before cleaning the common structures
  - reenter dependent coroutines so they ever finish

Introduced in 2d9187bc65.

Cc: qemu-stable@nongnu.org
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11 12:08:24 +02:00
Fam Zheng
335e993784 qemu-img: Add --force-share option to subcommands
This will force the opened images to allow sharing all permissions with other
programs.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11 11:08:40 +02:00
Eric Blake
46f5ac205a qobject: Use simpler QDict/QList scalar insertion macros
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.

Patch created mechanically via:
  spatch --sp-file scripts/coccinelle/qobject.cocci \
    --macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09 09:13:51 +02:00
Lidong Chen
db933fbe06 qemu-img: use blk_co_pwrite_zeroes for zero sectors when compressed
When the buffer is zero, blk_co_pwrite_zeroes is more effective than
blk_co_pwritev with BDRV_REQ_WRITE_COMPRESSED. This patch can reduce
the time for converting qcow2 images with lots of zero data.

Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-id: 1493261907-18734-1-git-send-email-lidongchen@tencent.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28 18:18:23 +02:00
Vladimir Sementsov-Ogievskiy
9f1b92add2 qemu-img: improve convert_iteration_sectors()
Do not do extra call to _get_block_status()

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170407113404.9351-1-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28 16:02:03 +02:00
Max Reitz
ed3d2ec98a block: Add errp to b{lk,drv}_truncate()
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28 16:02:02 +02:00
Max Reitz
48758a8473 qemu-img/convert: Move bs_n > 1 && -B check down
It does not make much sense to use a backing image for the target when
you concatenate multiple images (because then there is no correspondence
between the source images' backing files and the target's); but it was
still possible to give one by using -o backing_file=X instead of -B X.

Fix this by moving the check.

(Also, change the error message because -B is not the only way to
 specify the backing file, evidently.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-04-27 17:26:28 +02:00
Max Reitz
3258b91141 qemu-img/convert: Use @opts for one thing only
After storing the creation options for the new image into @opts, we
fetch some things for our own information, like the backing file name,
or whether to use encryption or preallocation.

With the -n parameter, there will not be any creation options; this is
not too bad because this just means that querying a NULL @opts will
always return the default value.

However, we also use @opts for the --object options. Therefore, @opts is
not necessarily NULL if -n was specified; instead, it may contain those
options. In practice, this probably does not cause any problems because
there most likely is no object that supports any of the parameters we
query here, but this is neither something we should rely on nor does
this variable reuse make the code very nice to read.

Therefore, just use a separate variable for the --object options.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-04-27 17:26:06 +02:00
Peter Lieven
9fd77f9972 qemu-img: simplify img_convert
img_convert has been around before there was an ImgConvertState or
a block backend, but it has never been modified to directly use
these structs. Change this by parsing parameters directly into
the ImgConvertState and directly use BlockBackend where possible.
Furthermore variable initialization has been reworked and sorted.

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-04-27 15:39:49 +02:00
Fam Zheng
78bbd910bb block: Make errp the last parameter of commit_active_start
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-9-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24 09:13:44 +02:00
Fam Zheng
9217283dc8 block: Make errp the last parameter of bdrv_img_create
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-6-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24 09:12:59 +02:00
Stefan Hajnoczi
c919297379 qemu-img: print short help on getopt failure
Printing the full help output obscures the error message for an invalid
command-line option or missing argument.

Before this patch:

  $ ./qemu-img --foo
  ...pages of output...

After this patch:

  $ ./qemu-img --foo
  qemu-img: unrecognized option '--foo'
  Try 'qemu-img --help' for more information

This patch adds the getopt ':' character so that it can distinguish
between missing arguments and unrecognized options.  This helps provide
more detailed error messages.

Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170317104541.28979-4-stefanha@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-03-27 16:50:36 +02:00
Stefan Hajnoczi
f7077624b0 qemu-img: fix switch indentation in img_amend()
QEMU coding style indents 'case' to the same level as the 'switch'
statement:

  switch (foo) {
  case 1:

Fix this coding style violation so checkpatch.pl doesn't complain about
the next patch.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170317104541.28979-3-stefanha@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-03-27 16:50:36 +02:00
Stefan Hajnoczi
4581c16fce qemu-img: show help for invalid global options
The qemu-img sub-command executes regardless of invalid global options:

  $ qemu-img --foo info test.img
  qemu-img: unrecognized option '--foo'
  image: test.img
  ...

The unrecognized option warning may be missed by the user.  This can
hide incorrect command-lines in scripts and confuse users.

This patch prints the help information and terminates instead of
executing the sub-command.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170317104541.28979-2-stefanha@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-03-27 16:50:36 +02:00
Kevin Wolf
0db832f42e commit: Add filter-node-name to block-commit
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.

This new option to blockdev-commit allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28 20:47:50 +01:00
Kevin Wolf
4ef85a9c23 mirror: Use real permissions in mirror/active commit block job
The mirror block job is mainly used for two different scenarios:
Mirroring to an otherwise unused, independent target node, or for active
commit where the target node is part of the backing chain of the source.

Similarly to the commit block job patch, we need to insert a new filter
node to keep the permissions correct during active commit.

Note that one change this implies is that job->blk points to
mirror_top_bs as its root now, and mirror_top_bs (rather than the actual
source node) contains the bs->job pointer. This requires qemu-img commit
to get the job by name now rather than just taking bs->job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
2017-02-28 20:47:46 +01:00
Kevin Wolf
55880601d8 block: Add BDRV_O_RESIZE for blk_new_open()
blk_new_open() is a convenience function that processes flags rather
than QDict options as a simple way to just open an image file.

In order to keep it convenient in the future, it must automatically
request the necessary permissions. This can easily be inferred from the
flags for read and write, but we need another flag that tells us whether
to get the resize permission.

We can't just always request it because that means that no block jobs
can run on the resulting BlockBackend (which is something that e.g.
qemu-img commit wants to do), but we also can't request it never because
most of the .bdrv_create() implementations call blk_truncate().

The solution is to introduce another flag that is passed by all users
that want to resize the image.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28 20:40:36 +01:00
Peter Lieven
2d9187bc65 qemu-img: make convert async
the convert process is currently completely implemented with sync operations.
That means it reads one buffer and then writes it. No parallelism and each sync
request takes as long as it takes until it is completed.

This can be a big performance hit when the convert process reads and writes
to devices which do not benefit from kernel readahead or pagecache.
In our environment we heavily have the following two use cases when using
qemu-img convert.

a) reading from NFS and writing to iSCSI for deploying templates
b) reading from iSCSI and writing to NFS for backups

In both processes we use libiscsi and libnfs so we have no kernel cache.

This patch changes the convert process to work with parallel running coroutines
which can significantly improve performance for network storage devices:

qemu-img (master)
 nfs -> iscsi 22.8 secs
 nfs -> ram   11.7 secs
 ram -> iscsi 12.3 secs

qemu-img-async (8 coroutines, in-order write disabled)
 nfs -> iscsi 11.0 secs
 nfs -> ram   10.4 secs
 ram -> iscsi  9.0 secs

This patches introduces 2 new cmdline parameters. The -m parameter to specify
the number of coroutines running in parallel (defaults to 8). And the -W parameter to
allow qemu-img to write to the target out of order rather than sequential. This improves
performance as the writes do not have to wait for each other to complete.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-02-28 20:40:31 +01:00
Markus Armbruster
f46bfdbfc8 util/cutils: Change qemu_strtosz*() from int64_t to uint64_t
This will permit its use in parse_option_size().

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
2017-02-23 20:35:36 +01:00
Markus Armbruster
f17fd4fdf0 util/cutils: Return qemu_strtosz*() error and value separately
This makes qemu_strtosz(), qemu_strtosz_mebi() and
qemu_strtosz_metric() similar to qemu_strtoi64(), except negative
values are rejected.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
2017-02-23 20:35:36 +01:00
Markus Armbruster
4fcdf65ae2 util/cutils: Let qemu_strtosz*() optionally reject trailing crap
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is
null and the conversion doesn't consume the string completely.
Matches how qemu_strtol() & friends work.

Only test_qemu_strtosz_simple() passes a null @endptr.  No functional
change there, because its conversion consumes the string.

Simplify callers that use @endptr only to fail when it doesn't point
to '\0' to pass a null @endptr instead.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
2017-02-23 20:35:36 +01:00
Markus Armbruster
606caa0a2a qemu-img: Wrap cvtnum() around qemu_strtosz()
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-21-git-send-email-armbru@redhat.com>
2017-02-23 20:35:36 +01:00
Markus Armbruster
466dea14e6 util/cutils: New qemu_strtosz()
Most callers of qemu_strtosz_suffix() pass QEMU_STRTOSZ_DEFSUFFIX_B.
Capture the pattern in new qemu_strtosz().

Inline qemu_strtosz_suffix() into its only remaining caller.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-17-git-send-email-armbru@redhat.com>
2017-02-23 20:35:36 +01:00
Peter Maydell
10d6eda192 qemu-img: Avoid setting ret to unused value in img_convert()
Coverity points out that we assign the return value from
bdrv_snapshot_load_tmp() to 'ret' in img_convert(), but then
never use that variable. (We check for failure by looking
at local_err instead.) Drop the unused assignment, bringing
the call into line with the following call to
bdrv_snapshot_laod_tmp_by_id_or_name().

(Fixes CID 1247240.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486744104-15590-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-12 00:56:32 +01:00
Peter Maydell
8b3c679228 qemu-img: Use qemu_strtoul() rather than raw strtoul()
Some of the argument parsing in qemu-img uses strtoul() to parse
integer arguments.  This is tricky to get correct and in fact the
code does not get it right, because it assigns the result of
strtoul() to an 'int' variable and then tries to check for > INT_MAX.
Coverity correctly complains that the comparison is always false.

Rewrite to use qemu_strtoul(), which has a saner convention for
reporting conversion failures.

(Fixes CID 1356421, CID 1356422, CID 1356423.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486744104-15590-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-12 00:53:31 +01:00