Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-17-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fork() is a simple way to ensure that state does not leak in between
fuzzing runs. Unfortunately, the fuzzer mutation engine relies on
bitmaps which contain coverage information for each fuzzing run, and
these bitmaps should be copied from the child to the parent(where the
mutation occurs). These bitmaps are created through compile-time
instrumentation and they are not shared with fork()-ed processes, by
default. To address this, we create a shared memory region, adjust its
size and map it _over_ the counter region. Furthermore, libfuzzer
doesn't generally expose the globals that specify the location of the
counters/coverage bitmap. As a workaround, we rely on a custom linker
script which forces all of the bitmaps we care about to be placed in a
contiguous region, which is easy to locate and mmap over.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-16-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
tests/fuzz/fuzz.c serves as the entry point for the virtual-device
fuzzer. Namely, libfuzzer invokes the LLVMFuzzerInitialize and
LLVMFuzzerTestOneInput functions, both of which are defined in this
file. This change adds a "FuzzTarget" struct, along with the
fuzz_add_target function, which should be used to define new fuzz
targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-13-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The moved functions are not specific to qos-test and might be useful
elsewhere. For example the virtual-device fuzzer makes use of them for
qos-assisted fuzz-targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-12-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Most qos-related objects were specified in the qos-test-obj-y variable.
qos-test-obj-y also included qos-test.o which defines a main().
This made it difficult to repurpose qos-test-obj-y to link anything
beside tests/qos-test against libqos. This change separates objects that
are libqos-specific and ones that are qos-test specific into different
variables.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200220041118.23264-11-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The names i2c_send and i2c_recv collide with functions defined in
hw/i2c/core.c. This causes an error when linking against libqos and
softmmu simultaneously (for example when using qtest inproc). Rename the
libqos functions to avoid this.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200220041118.23264-10-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When using qtest "in-process" communication, qtest_sendf directly calls
a function in the server (qtest.c). Previously, bufwrite used
socket_send, which bypasses the TransportOps enabling the call into
qtest.c. This change replaces the socket_send calls with ops->send,
maintaining the benefits of the direct socket_send call, while adding
support for in-process qtest calls.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-8-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes it simple to swap the transport functions for qtest commands
to and from the qtest client. For example, now it is possible to
directly pass qtest commands to a server handler that exists within the
same process, without the standard way of writing to a file descriptor.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-7-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Considering that legacy "mem" option is deprecated, use memdev
in tests and add an additional test for legacy "mem" option
on old machine type, to make sure it won't regress in the future.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200219160953.13771-80-imammedo@redhat.com>
Use GString to pass argument to make_cli() so that it would be easy
to dynamically change test case arguments from main(). The follow up
patch will use it to change RAM size options depending on target.
While at it cleanup 'cli' freeing, using g_autofree annotation.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200219160953.13771-79-imammedo@redhat.com>
Fixes: fc281c8020
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-13-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
spotted by asan, 'check-qtest-aarch64' runs fail if sanitizers is enabled.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There's an assert in autoconverge that checks that we quit the
iteration when we go below the expected threshold. Philippe
saw a case where this assert fired with the measured value
slightly over the threshold. (about 3k out of a few million).
I can think of two reasons:
a) Rounding errors
b) That after we make the decision to quit iteration we do one
more sync and that sees a few more dirty pages.
So add 1% slack to the assertion, that should cover a and
most cases of b, probably all we'll see for the test.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The first readdir test simply checks the amount of directory
entries returned by 9pfs server, according to the created amount
of virtual files on 9pfs synth driver side. Then the subsequent
readdir test also checks whether all directory entries have the
expected file names (as created on 9pfs synth driver side),
ignoring their precise order in result list though.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <e0b4402722a877178f8fb6a8ad7b64bb20150613.1579567020.git.qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
The 9p protocol sends strings in general without null termination
over the wire. However for future use of this functions it is
beneficial for the delivered string to be null terminated though
for being able to use the string with standard C functions which
often rely on strings being null terminated.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <52c84e2ce3bcafc2a38eed13b8c8e23bc1a8ecb9.1579567019.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Update comments in tests/qtest/bios-tables-test.c to reflect the
current path of bios-tables-test-allowed-diff.h, which is now under
tests/qtest/ as well.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-Id: <20200202110009.51479-1-guoheyi@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's not a big deal, but 'check qtest-ppc/ppc64' runs fail if sanitizers is enabled.
The memory leak stack is as follow:
Direct leak of 128 byte(s) in 4 object(s) allocated from:
#0 0x7f11756f5970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7f1174f2549d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x556af05aa7da in mm_fw_cfg_init /mnt/sdb/qemu/tests/libqos/fw_cfg.c:119
#3 0x556af059f4f5 in read_boot_order_pmac /mnt/sdb/qemu/tests/boot-order-test.c:137
#4 0x556af059efe2 in test_a_boot_order /mnt/sdb/qemu/tests/boot-order-test.c:47
#5 0x556af059f2c0 in test_boot_orders /mnt/sdb/qemu/tests/boot-order-test.c:59
#6 0x556af059f52d in test_pmac_oldworld_boot_order /mnt/sdb/qemu/tests/boot-order-test.c:152
#7 0x7f1174f46cb9 (/lib64/libglib-2.0.so.0+0x73cb9)
#8 0x7f1174f46b73 (/lib64/libglib-2.0.so.0+0x73b73)
#9 0x7f1174f46b73 (/lib64/libglib-2.0.so.0+0x73b73)
#10 0x7f1174f46f71 in g_test_run_suite (/lib64/libglib-2.0.so.0+0x73f71)
#11 0x7f1174f46f94 in g_test_run (/lib64/libglib-2.0.so.0+0x73f94)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200203025935.36228-1-pannengyuan@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-bridge isn't actually a test, it's just a helper
(that should probably move somewhere else) - but the build was
broken in the qtest move.
Fixes: 833884f37a
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200117122648.137862-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some default features of the pseries machine are only available with
KVM. Warnings are printed when the pseries machine is used with another
accelerator:
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
This is annoying for CI since it usually runs without KVM. We already
disable features that emit similar warnings thanks to properties of
the pseries machine, but this is open-coded in various
places. Consolidate the set of properties in a single place. Extend it
to silence the above warnings. And use it in the various tests that
start pseries machines.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158059697130.1820292.7823434132030453110.stgit@bahia.lan>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[dwg: Correct minor grammatical error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
kvm-no-adjvtime is a KVM specific CPU property and a first of its
kind. To accommodate it we also add kvm_arm_add_vcpu_properties()
and a KVM specific CPU properties description to the CPU features
document.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-7-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we know what the default value should be then we can test for
that as well as the feature existence.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200120101023.16030-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=X4Ax
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/pull-migration-pull-request' into staging
Migration pull request
# gpg: Signature made Wed 29 Jan 2020 10:57:23 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/pull-migration-pull-request:
migration/compress: compress QEMUFile is not writable
migration: Simplify get_qlist
multifd: Split multifd code into its own file
multifd: Make multifd_load_setup() get an Error parameter
multifd: Make multifd_save_setup() get an Error parameter
migration: Make checkpatch happy with comments
multifd: Use qemu_target_page_size()
multifd: multifd_send_sync_main only needs the qemufile
multifd: multifd_queue_page only needs the qemufile
multifd: multifd_send_pages only needs the qemufile
ram_addr: Split RAMBlock definition
migration/multifd: fix nullptr access in multifd_send_terminate_threads
migration: Create migration_is_running()
migration-test: Make sure that multifd and cancel works
migration: Don't send data if we have stopped
qemu-file: Don't do IO after shutdown
multifd: Make sure that we don't do any IO after an error
migration-test: Use g_free() instead of free()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that this sequence works:
- launch source
- launch target
- start migration
- cancel migration
- relaunch target
- do migration again
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fuzzing the Linux kernel with syzkaller allowed to find how to crash qemu
using a special SCSI_IOCTL_SEND_COMMAND. It hits the assertion in
ide_dma_cb() introduced in the commit a718978ed5 in July 2015.
Currently this bug is not reproduced by the unit tests.
Let's improve the ide-test to cover more PRDT cases including one
that causes this particular qemu crash.
The test is developed according to the Programming Interface for
Bus Master IDE Controller (Revision 1.0 5/16/94).
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Message-id: 20191223175117.508990-3-alex.popov@linux.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.
Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
test lockable SMRAM at default SMBASE feature, introduced by
patch "q35: implement 128K SMRAM at default SMBASE address"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575899217-333105-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We set multifd-channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Do not allocate resources in case we return early, and make sure
to free dest_cmdline at the end.
Reported-by: Euler Robot <euler.robot@huawei.com>
Reported-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200116140736.9498-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e51e711b1b has moved the initialization of start_address and
end_address after the definition of the command line argument,
where the nvramrc is initialized, and thus the loop is between 0 and 0
rather than 1 MiB and 100 MiB.
It doesn't affect the result of the test if all the tests are run in
sequence because the two first tests don't run the loop, so the
values are correctly initialized when we actually need them.
But it hangs when we ask to run only one test, for instance:
QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 \
tests/migration-test -m=quick -p /ppc64/migration/validate_uuid_error
Fixes: e51e711b1b ("tests/migration: Add migration-test header file")
Cc: wei@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200107163437.52139-1-lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Build index.html for docs
-----BEGIN PGP SIGNATURE-----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=CchM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-01-12' into staging
* Move qtests into a separate directory
* Build index.html for docs
# gpg: Signature made Sun 12 Jan 2020 11:21:41 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-01-12:
docs: build an index page for the HTML docs
tests/libqos: Move the libqos files under tests/qtest/
tests/Makefile: Move qtest-related settings to a separate Makefile.include
test: Move qtests to a separate directory
tests/Makefile: Separate unit test dependencies from qtest dependencies
tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables
tests/ptimer: Remove unnecessary inclusion of libqtest.h
tests/Makefile: test-char does not need libqtest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qos stuff belongs to qtest, so move it into that directory, too.
Message-Id: <20191218103059.11729-8-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
tests/Makefile.include is pretty much overcrowded. Now that we have a
dedicated folder for the qtests, let's move the related settings
to a Makefile.include file in that directory instead.
Message-Id: <20191218103059.11729-7-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
