Commit Graph

257 Commits

Author SHA1 Message Date
Mark Cave-Ayland
51f233ec92 misc: introduce new mos6522 VIA device and enable it for ppc builds
The MOS6522 VIA forms the bridge part of several Mac devices, including the
Mac via-cuda and via-pmu devices. Introduce a standard mos6522 device that
can be shared amongst multiple implementations.

This is effectively taking the 6522 parts out of cuda.c and turning them
into a separate device whilst also applying some style tidy-ups and including
a conversion to trace-events.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-11 10:18:52 +11:00
Andrey Smirnov
30b2f8709d i.MX: Add implementation of i.MX7 GPR IP block
Add minimal code needed to allow upstream Linux guest to boot.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 10:40:30 +00:00
Andrey Smirnov
0a7bc1c045 i.MX: Add code to emulate i.MX7 SNVS IP-block
Add code to emulate SNVS IP-block. Currently only the bits needed to
be able to emulate machine shutdown are implemented.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 10:40:30 +00:00
Andrey Smirnov
067e68e704 i.MX: Add code to emulate i.MX2 watchdog IP block
Add enough code to emulate i.MX2 watchdog IP block so it would be
possible to reboot the machine running Linux Guest.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 10:40:29 +00:00
Andrey Smirnov
e9e0ef15d2 i.MX: Add code to emulate i.MX7 CCM, PMU and ANALOG IP blocks
Add minimal code needed to allow upstream Linux guest to boot.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 10:40:29 +00:00
Philippe Mathieu-Daudé
0d5d8a3a90 hw/misc/pvpanic: extract public API from i386/pc to "hw/misc/pvpanic.h"
and remove the old i386/pc dependency.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:02 +03:00
Joel Stanley
b6e70d1d7f hw/arm/aspeed: Unlock SCU when running kernel
The ASPEED hardware contains a lock register for the SCU that disables
any writes to the SCU when it is locked. The machine comes up with the
lock enabled, but on all known hardware u-boot will unlock it and leave
it unlocked when loading the kernel.

This means the kernel expects the SCU to be unlocked. When booting from
an emulated ROM the normal u-boot unlock path is executed. Things don't
go well when booting using the -kernel command line, as u-boot does not
run first.

Change behaviour so that when a kernel is passed to the machine, set the
reset value of the SCU to be unlocked.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20171114122018.12204-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-20 13:47:49 +00:00
Marc-André Lureau
6e43353f10 hw/misc: add vmcoreinfo device
See docs/specs/vmcoreinfo.txt for details.

"etc/vmcoreinfo" fw_cfg entry is added when using "-device vmcoreinfo".

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15 05:54:40 +03:00
Subbaraya Sundeep
0ee1e1f469 msf2: Microsemi Smartfusion2 System Register block
Added Sytem register block of Smartfusion2.
This block has PLL registers which are accessed by guest.

Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170920201737.25723-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21 16:36:56 +01:00
Peter Maydell
dd73185b7d hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller
Implement a model of the Serial Communication Controller (SCC) found
in MPS2 FPGA images.

The primary purpose of this device is to communicate with the
Motherboard Configuration Controller (MCC) which is located on
the MPS board itself, outside the FPGA image. This is used
for programming the MPS clock generators. The SCC also has
some basic ID registers and an output for the board LEDs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17 13:36:08 +01:00
Philippe Mathieu-Daudé
8f7b1bd6ce hw/misc: add missing includes
inlined create_unimplemented_device() calls sysbus_mmio_map_overlap().

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-11 11:18:37 +03:00
KONRAD Frederic
7cc2298c46 introduce mmio_interface
This introduces mmio_interface object which contains a MemoryRegion
and can be hotplugged/hotunplugged.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-06-27 15:09:15 +02:00
Marcin Chojnacki
54a5ba13a9 target-arm: Implement BCM2835 hardware RNG
Recent vanilla Raspberry Pi kernels started to make use of
the hardware random number generator in BCM2835 SoC. As a
result, those kernels wouldn't work anymore under QEMU
but rather just freeze during the boot process.

This patch implements a trivial BCM2835 compatible RNG,
and adds it as a peripheral to BCM2835 platform, which
allows to boot a vanilla Raspberry Pi kernel under Qemu.

Changes since v1:
 * Prevented guest from writing [31..20] bits in rng_status
 * Removed redundant minimum_version_id_old
 * Added field entries for the state
 * Changed realize function to reset

Signed-off-by: Marcin Chojnacki <marcinch7@gmail.com>
Message-id: 20170210210857.47893-1-marcinch7@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 12:08:13 +00:00
Paul Burton
08944be1d9 hw/mips_cmgcr: allow GCR base to be moved
Support moving the GCR base address & updating the CPU's CP0 CMGCRBase
register appropriately. This is required if a platform needs to move its
GCRs away from other memory, as the MIPS Boston development board does
to avoid its flash memory.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21 22:24:58 +00:00
Peter Maydell
f5095aa380 hw/misc: New "unimplemented" sysbus device
Create a new "unimplemented" sysbus device, which simply accepts
all read and write accesses, and implements them as read-as-zero,
write-ignored, with logging of the access as LOG_UNIMP.

This is useful for stubbing out bits of an SoC or board model
which haven't been written yet.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484247815-15279-3-git-send-email-peter.maydell@linaro.org
2017-02-07 18:55:15 +00:00
Cédric Le Goater
6efbac908f aspeed: add the definitions for the AST2400 A1 SoC
There is not much differences with the A0 revision apart from the DDR
calibration.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-10-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:28 +00:00
Cédric Le Goater
c6c7cfb01a aspeed: add a ram_size property to the memory controller
Configure the size of the RAM of the SOC using a property to propagate
the value down to the memory controller from the board level.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-14-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater
3755f9e316 aspeed: calculate the RAM size bits at realize time
There is no need to do this at each reset as the RAM size will not
change.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-12-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater
365aff1eaa aspeed: add a ast2500 SoC and support to the SCU and SDMC controllers
Based on previous work done by Andrew Jeffery <andrew@aj.id.au>.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-9-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater
8da33ef757 hw/misc: use macros to define hw-strap1 register on the AST2400 Aspeed SoC
This gives some explanation behind the magic number 0x120CE416.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-8-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater
c2da8a8b90 ast2400: add a memory controller device model
The uboot in the previous release of the SDK was using a hardcoded
value for memory size. This is not true anymore, the value is now
retrieved from the memory controller.

Below is a model for this device, only supporting unlock and
configuration. Without it, we endup running a guest with 64MB, which
is a bit low nowdays. It uses a 'silicon-rev' property and ram_size to
build a default value. Some bits should be linked to SCU strapping
registers but it seems a bit complex to add for the current need.

The model is ready for the AST2500 SOC.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-06 19:52:17 +01:00
Cédric Le Goater
79a9f323a8 ast2400: externalize revision numbers
AST2400_A0_SILICON_REV is defined twice. Fix this by including the
definition in the header file as well as the routine to check if a
silicon revision is supported. It will useful to reuse in other
controllers.

Let's add also AST2500_A0_SILICON_REV for future use.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-5-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14 16:51:39 +01:00
Markus Armbruster
121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Peter Maydell
74e1b782b3 MIPS patches 2016-07-12
Changes:
 * support 10-bit ASIDs
 * MIPS64R6-generic renamed to I6400
 * initial GIC support
 * implement RESET_BASE register in CM GCR
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJXhMtOAAoJEFIRjjwLKdprahQH/2qBMp7Hnucy7jhiPHRtRZTo
 zZAhuRJ0Z2LT9xH+sTg3HcjHI7aXps5cG2f7Fw4X/JKNRY4KO19yEBnMhc5he2Ut
 XPtHCeMXXq6zU4RMHqlx6wChHn5AUll/3EeSvm6JMV+HhE6oDBk1yl5C8ipPlVCd
 KEz6LlUFNMbuxu2tM4DoMNAWeKmunBx3vO+JuErB6hjCWM5G0mV9aPDkbwTOmVLn
 qGgzzmNDiPE6JWrSpbHetsdCO7V9xtXzhcFsu240GJ/+XJMjUXb1m6ETsJxT9EYh
 vLfFzwozBSjX6ZQZVNFIAeJZnq96NOHqZ56sU7s4YktVXjl26JAahScTTH0aiNo=
 =sTce
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160712' into staging

MIPS patches 2016-07-12

Changes:
* support 10-bit ASIDs
* MIPS64R6-generic renamed to I6400
* initial GIC support
* implement RESET_BASE register in CM GCR

# gpg: Signature made Tue 12 Jul 2016 11:49:50 BST
# gpg:                using RSA key 0x52118E3C0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4  4FC0 5211 8E3C 0B29 DA6B

* remotes/lalrae/tags/mips-20160712:
  target-mips: enable 10-bit ASIDs in I6400 CPU
  target-mips: support CP0.Config4.AE bit
  target-mips: change ASID type to hold more than 8 bits
  target-mips: add ASID mask field and replace magic values
  target-mips: replace MIPS64R6-generic with the real I6400 CPU model
  hw/mips_cmgcr: implement RESET_BASE register in CM GCR
  hw/mips_cpc: make VP correctly start from the reset vector
  target-mips: add exception base to MIPS CPU
  hw/mips/cps: create GIC block inside CPS
  hw/mips: implement Global Interrupt Controller
  hw/mips: implement GIC Interval Timer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12 12:34:41 +01:00
Leon Alrae
c09199fe73 hw/mips_cmgcr: implement RESET_BASE register in CM GCR
Implement RESET_BASE register which is local to each VP and a write to
it changes VP's reset exception base. Also, add OTHER register to
allow a software running on one VP to access other VP's local registers.

Guest can use this mechanism to specify custom address from which a VP
will start execution.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12 09:10:16 +01:00
Leon Alrae
19494f811a hw/mips/cps: create GIC block inside CPS
Add GIC to CPS and expose its interrupt pins instead of CPU's.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12 09:10:13 +01:00
Jean-Christophe Dubois
66542f6399 i.MX: split the GPT timer implementation into per SOC definitions
In various Freescale SOCs, the GPT timers can be configured to select
its input clock.

Depending on the SOC the set of available input clocks may vary.

The actual single GPT definition was no good enough and because of it
booting the sabrelite board with a i.MX6DL device tree would fail
because of an incorrect input clock definition for the i.MX6DL SOC.

This patch fixes the i.MX6DL boot failure by adding the ability to
define a different set of input clocks depending on the considered SOC.

A different class has been defined for i.MX25, i.MX31 and i.MX6 each with
its specific set of input clocks.

The patch has been tested by booting KZM, i.MX25 PDK, i.MX6Q sabrelite
and i.MX6DL sabrelite.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 1467325619-8374-1-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed spacing round '/' operator]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-07 13:47:01 +01:00
Peter Maydell
e0dadc1e9e aux: Rename aux.[ch] to auxbus.[ch] for the benefit of Windows
On Windows 'aux.*' is a reserved name and cannot be used for
filenames; see
  https://msdn.microsoft.com/en-gb/library/windows/desktop/aa365247(v=vs.85).aspx

This prevents cloning the QEMU git repo on Windows:

C:\Java\sources\kvm> git clone https://github.com/qemu/qemu.git
Cloning into 'qemu'...
remote: Counting objects: 279563, done.
remote: Total 279563 (delta 0), reused 0 (delta 0), pack-reused 279563R
Receiving objects: 100% (279563/279563), 122.45 MiB | 3.52 MiB/s, done.
Resolving deltas: 100% (221942/221942), done.
Checking connectivity... done.
error: unable to create file hw/misc/aux.c (No such file or directory)
error: unable to create file include/hw/misc/aux.h (No such file or directory)
Checking out files: 100% (4795/4795), done.
fatal: unable to checkout working tree
warning: Clone succeeded, but checkout failed.
You can inspect what was checked out with 'git status'
and retry the checkout with 'git checkout -f HEAD'

(bug https://bugs.launchpad.net/bugs/1595240)

Rename the offending files for the benefit of Windows.

Reported-by: Алексей Курган <akurgan@yandex.ru>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1467377145-32385-1-git-send-email-peter.maydell@linaro.org
2016-07-07 13:47:01 +01:00
Andrew Jeffery
1c8a2388aa hw/misc: Add a model for the ASPEED System Control Unit
The SCU is a collection of chip-level control registers that manage the
various functions supported by ASPEED SoCs. Typically the bits control
interactions with clocks, external hardware or reset behaviour, and we
can largly take a hands-off approach to reads and writes.

Firmware makes heavy use of the state to determine how to boot, but the
reset values vary from SoC to SoC (eg AST2400 vs AST2500). A qdev
property is exposed so that the integrating SoC model can configure the
silicon revision, which in-turn selects the appropriate reset values.
Further qdev properties are exposed so the board model can configure the
board-dependent hardware strapping.

Almost all provided AST2400 reset values are specified by the datasheet.
The notable exception is SOC_SCRATCH1, where we mark the DRAM as
successfully initialised to avoid unnecessary dark corners in the SoC's
u-boot support.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1466744305-23163-2-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: drop unnecessary inttypes.h include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-27 15:37:33 +01:00
KONRAD Frederic
6fc7f77fd2 introduce aux-bus
This introduces a new bus: aux-bus.

It contains an address space for aux slaves devices and a bridge to an I2C bus
for I2C through AUX transactions.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14 15:59:15 +01:00
Jean-Christophe DUBOIS
1983057470 i.MX: Add i.MX6 System Reset Controller device.
This controller is also present in i.MX5X devices but they are not
yet emulated by QEMU.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:28 +01:00
Leon Alrae
34fa7e83e1 hw/mips: implement ITC Configuration Tags and Storage Cells
Implement ITC as a single object consisting of two memory regions:

1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which
are accessible by the CPU via CACHE instruction. Also adding
MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will
dispatch reads/writes directly.

2) storage_io: memory-mapped ITC Storage whose address space is configurable
(i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers.

ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the
ITC cell tag indicates the type of the cell. If the ITC Storage contains
both types of cells then FIFOs are located before Semaphores.

Since issuing thread can get blocked on the access to a cell (in E/F
Synchronized and P/V Synchronized Views) each cell has a bitmap to track
which threads are currently blocked.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:14:00 +01:00
Leon Alrae
2edd5261ff hw/mips/cps: create CPC block inside CPS
Create Cluster Power Controller and add a link to the CPC MemoryRegion
in GCR. Guest can enable / map CPC to any physical address by writing to
the memory-mapped GCR_CPC_BASE register.

Set vp-start-reset property to 1 to allow only first VP to run from reset.
Others are brought up by the guest via CPC memory-mapped registers.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:13:59 +01:00
Leon Alrae
1f93a6e4f3 hw/mips: add initial Cluster Power Controller support
Cluster Power Controller (CPC) is responsible for power management in
multiprocessing system. It provides registers to control the power and the
clock frequency of the individual elements in the system.

This patch implements only three registers that are used to control the
power state of each VP on a single core:
* VP Run is a write-only register used to set each VP to the run state
* VP Stop is a write-only register used to set each VP to the suspend state
* VP Running is a read-only register indicating the run state of each VP

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:13:59 +01:00
Yongbok Kim
3994215db4 hw/mips: add initial Global Config Register support
Add initial GCR support to indicate number of VPs present in the system,
L2 bypass mode and revision number.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
[leon.alrae@imgtec.com:
 * removed GIC part,
 * changed commit message,
 * replaced %lx format spec. with PRIx64,
 * renamed mips_gcr.{c,h} to mips_cmgcr.{c,h},
 * replaced CONFIG_MIPS_GIC with CONFIG_MIPS_CPS]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:13:59 +01:00
Grégory ESTRADE
355a8ccc5c bcm2835_property: implement framebuffer control/configuration properties
The property channel driver now interfaces with the framebuffer device
to query and set framebuffer parameters. As a result of this, the "get
ARM RAM size" query now correctly returns the video RAM base address
(not total RAM size), and the ram-size property is no longer relevant
here.

Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1457467526-8840-5-git-send-email-Andrew.Baumann@microsoft.com
[AB: cleanup/refactoring for upstream submission]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois
a66d815cd5 i.MX: Add i.MX6 CCM and ANALOG device.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 9fa80b4d8c5d0f50c94e77d74f952a7a665e168f.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois
d552f675fb i.MX: Add the CLK_IPG_HIGH clock
EPIT, GPT and other i.MX timers are using "abstract" clocks among which
a CLK_IPG_HIGH clock.

On i.MX25 and i.MX31 CLK_IPG and CLK_IPG_HIGH are mapped to the same clock
but on other SOC like i.MX6 they are mapped to distinct clocks.

This patch add the CLK_IPG_HIGH to prepare for SOC where these 2 clocks are
different.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 224bf650194760284cb40630e985867e1373276a.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois
f4b2add6cc i.MX: Remove CCM useless clock computation handling.
Most clocks supported by the CCM are useless to the qemu framework.

Only clocks related to timers (EPIT, GPT, PWM, WATCHDOG, ...) are usefull
to QEMU code.

Therefore this patch removes clock computation handling for all clocks but:
* CLK_NONE,
* CLK_IPG,
* CLK_32k

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 9e7222efb349801032e60c0f6b0fbad0e5dcf648.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois
c91a5883c3 i.MX: Rename CCM NOCLK to CLK_NONE for naming consistency.
This way all CCM clock defines/enums are named CLK_XXX

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 8537df765c1713625c7a8b9aca4c7ca60b42e0c0.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Stephen Warren
f0afa73164 bcm2835_property: implement "get board revision" query
Return a valid value from the BCM2835 property mailbox query "get board
revision". This query is used by U-Boot. Implementing it fixes the first
obvious difference between qemu and real HW.

The value returned is currently hard-coded to match the RPi2 I own. Other
values are legal, e.g. different board manufacturer field values are
likely to exist in the wild.

Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454993910-24077-1-git-send-email-swarren@wwwdotorg.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-11 11:17:32 +00:00
Andrew Baumann
04f1ab15b9 bcm2835_property: add bcm2835 property channel
This sits behind the mailbox interface, and implements
request/response queries for system properties. The
framebuffer-related properties will be added in a later patch.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 15:00:44 +00:00
Andrew Baumann
99494e696e bcm2835_mbox: add BCM2835 mailboxes
This adds the system mailboxes which are used to communicate with a
number of GPU peripherals on Pi/Pi2.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 14:56:32 +00:00
Jean-Christophe DUBOIS
fea01f9604 i.MX: move i.MX31 CCM object to register array
With this i.MX25 and i.MX31 will have closer implementations.

Moreover all i.MX31 CCM registers are now present.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 15:52:18 +00:00
Jean-Christophe Dubois
92eccc6e13 i.MX: Add an i.MX25 specific CCM class/instance
With this CCM, i.MX25 timer is accurate with "real world time".

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:16 +00:00
Jean-Christophe Dubois
cb54d868c6 i.MX: Split the CCM class into an abstract base class and a concrete class
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.

IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.

For now the i.MX25 continues to use the i.MX31 CCM implementation.

An i.MX25 specific CCM will be introduced in a later patch.

We also rework initialization to stop using deprecated sysbus device init.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Jean-Christophe Dubois
aaa9ec3b4d i.MX: rename i.MX CCM get_clock() function and CLK ID enum names
This is to prepare for CCM code refactoring.

This is just a bit of function and enum values renaming.

We also remove some useless intermediate variables.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 53c4d9b9611988a5f56f178f285e04490747925e.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Guenter Roeck
74fcbd22d2 hw/misc: Add support for ADC controller in Xilinx Zynq 7000
Add support for the Xilinx XADC core used in Zynq 7000.

References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
  Dual 12-Bit 1 MSPS Analog-to-Digital Converter

Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
  * Changed macro names to match TRM where possible
  * Made programmers model macro scheme consistent
  * Dropped XADC_ZYNQ_ prefix on local macros
  * Fix ALM field width
  * Update threshold-comparison interrupts in _update_ints()
  * factored out DFIFO pushes into helper. Renamed to "push/pop"
  * Changed xadc_reg to 10 bits and added OOB check.
  * Reduced scope of MCTL reset to just stop channel coms.
  * Added dummy read data to write commands
  * Changed _ to - seperators in string names and filenames
  * Dropped ------------ in header comment
  * Catchall'ed _update_ints() in _write handler.
  * Minor whitespace changes.
  * Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12 21:30:42 +00:00
David Marchand
5105b1d8c2 ivshmem: add check on protocol version in QEMU
Send a protocol version as the first message from server, clients must
close communication if they don't support this protocol version.  Older
QEMUs should be fine with this change in the protocol since they
overrides their own vm_id on reception of an id associated to no
eventfd.

Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[use fifo_update_and_get()]
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:03:18 +02:00
Jean-Christophe Dubois
282e74c83f i.MX: Split CCM emulator in a header file and a source file
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b1d6f990229b2608bbaba24f4ff359571c0b07da.1437080501.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:20 +01:00
Alistair Francis
bbbbd9002f stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFG
This patch adds the stm32f2xx System Configuration
Controller. This is used to configure what memory is mapped
at address 0 (although that is not supported) as well
as configure how the EXTI interrupts work (also not
supported at the moment).

This device is not required for basic examples, but more
complex systems will require it (as well as the EXTI device)

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 13:21:05 +00:00
Kim Phillips
cf7087db10 vfio: move hw/misc/vfio.c to hw/vfio/pci.c Move vfio.h into include/hw/vfio
This is done in preparation for the addition of VFIO platform
device support.

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-19 15:24:06 -07:00
Alexey Kardashevskiy
6d8be4c343 vfio: Add vfio_container_ioctl()
While most operations with VFIO IOMMU driver are generic and used inside
vfio.c, there are still some operations which only specific VFIO IOMMU
drivers implement. The first example of it will be reading a DMA window
start from the host.

This adds a helper which passes an ioctl request to the container's fd.

The helper will check if @req is known. For this, stub is added. This return
-1 on any requests for now.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:23 +02:00
Andreas Färber
53cb9a1c2f arm11mpcore: Split off SCU device
Inspired by a9scu.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 17:47:30 +01:00
Andreas Färber
fc719d7741 a9mpcore: Embed A9SCUState
Prepares for QOM realize.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-11-05 17:47:29 +01:00
Alex Bennée
b86160555f integrator: fix Linux boot failure by emulating dbg region
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel
as the value returned by unassigned_mem_read returned non-zero and left
the kernel looping forever waiting for it to change (see
integrator_led_set in the kernel code).

Relying on a varying implementation detail is incorrect anyway so this
introduces a basic stub of a memory region for the debug/LED section
on the integrator board.

Signed-off-by: Alex Bennée <alex@bennee.com>
Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org
[PMM: removed three unused fields from struct IntegratorDebugState]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-10-31 14:00:16 +01:00
Paolo Bonzini
0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00