If KVM_CAP_RPT_INVALIDATE KVM capability is enabled, then
- indicate the availability of H_RPT_INVALIDATE hcall to the guest via
ibm,hypertas-functions property.
- Enable the hcall
Both the above are done only if the new sPAPR machine capability
cap-rpt-invalidate is set.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20210706112440.1449562-3-bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This addresses the comments from v22.
The functional changes are (the VOF ones need retesting with Pegasos2):
(VOF) setprop will start failing if the machine class callback
did not handle it;
(VOF) unit addresses are lowered in path_offset();
(SPAPR) /chosen/bootargs is initialized from kernel_cmdline if
the client did not change it.
Fixes: 5c991e5d4378 ("spapr: Implement Open Firmware client interface")
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210708065625.548396-1-aik@ozlabs.ru>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several new L1D cache flush bits added to the hcall which reflect
hardware security features for speculative cache access issues.
These behaviours are now being specified as negative in order to simplify
patched kernel compatibility with older firmware (a new problem found in
existing systems would automatically be vulnerable).
[dwg: Technically this changes behaviour for existing machine types.
After discussion with Nick, we've determined this is safe, because
the worst that will happen if a guest gets the wrong information due
to a migration is that it will perform some unnecessary workarounds,
but will remain correct and secure (well, as secure as it was going
to be anyway). In addition the change only affects cap-cfpc=safe
which is not enabled by default, and in fact is not possible to set
on any current hardware (though it's expected it will be possible on
POWER10)]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210615044107.1481608-1-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PAPR platform describes an OS environment that's presented by
a combination of a hypervisor and firmware. The features it specifies
require collaboration between the firmware and the hypervisor.
Since the beginning, the runtime component of the firmware (RTAS) has
been implemented as a 20 byte shim which simply forwards it to
a hypercall implemented in qemu. The boot time firmware component is
SLOF - but a build that's specific to qemu, and has always needed to be
updated in sync with it. Even though we've managed to limit the amount
of runtime communication we need between qemu and SLOF, there's some,
and it has become increasingly awkward to handle as we've implemented
new features.
This implements a boot time OF client interface (CI) which is
enabled by a new "x-vof" pseries machine option (stands for "Virtual Open
Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall
which implements Open Firmware Client Interface (OF CI). This allows
using a smaller stateless firmware which does not have to manage
the device tree.
The new "vof.bin" firmware image is included with source code under
pc-bios/. It also includes RTAS blob.
This implements a handful of CI methods just to get -kernel/-initrd
working. In particular, this implements the device tree fetching and
simple memory allocator - "claim" (an OF CI memory allocator) and updates
"/memory@0/available" to report the client about available memory.
This implements changing some device tree properties which we know how
to deal with, the rest is ignored. To allow changes, this skips
fdt_pack() when x-vof=on as not packing the blob leaves some room for
appending.
In absence of SLOF, this assigns phandles to device tree nodes to make
device tree traversing work.
When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree.
This adds basic instances support which are managed by a hash map
ihandle -> [phandle].
Before the guest started, the used memory is:
0..e60 - the initial firmware
8000..10000 - stack
400000.. - kernel
3ea0000.. - initramdisk
This OF CI does not implement "interpret".
Unlike SLOF, this does not format uninitialized nvram. Instead, this
includes a disk image with pre-formatted nvram.
With this basic support, this can only boot into kernel directly.
However this is just enough for the petitboot kernel and initradmdisk to
boot from any possible source. Note this requires reasonably recent guest
kernel with:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735
The immediate benefit is much faster booting time which especially
crucial with fully emulated early CPU bring up environments. Also this
may come handy when/if GRUB-in-the-userspace sees light of the day.
This separates VOF and sPAPR in a hope that VOF bits may be reused by
other POWERPC boards which do not support pSeries.
This assumes potential support for booting from QEMU backends
such as blockdev or netdev without devices/drivers used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
[dwg: Adjusted some includes which broke compile in some more obscure
compilation setups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU reserves space for RTAS via /rtas/rtas-size which tells the client
how much space the RTAS requires to work which includes the RTAS binary
blob implementing RTAS runtime. Because pseries supports FWNMI which
requires plenty of space, QEMU reserves more than 2KB which is
enough for the RTAS blob as it is just 20 bytes (under QEMU).
Since FWNMI reset delivery was added, RTAS_SIZE macro is not used anymore.
This replaces RTAS_SIZE with RTAS_MIN_SIZE and uses it in
the /rtas/rtas-size calculation to account for the RTAS blob.
Fixes: 0e236d3477 ("ppc/spapr: Implement FWNMI System Reset delivery")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210622070336.1463250-1-aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make -smp syntactic sugar for a compound property "-machine
smp.{cores,threads,cpu,...}". machine_smp_parse is replaced by the
setter for the property.
numa-test will now cover the new syntax, while other tests
still use -smp.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is just enough to make reboot and poweroff work. Works for
linux, u-boot, and the arm trusted firmware. Not tested, but should
work for plan9, and bare-metal/hobby OSes, since they seem to generally
do what linux does for reset.
The watchdog timer functionality is not yet implemented.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/64
Signed-off-by: Nolan Leake <nolan@sigbus.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210625210209.1870217-1-nolan@sigbus.net
[PMM: tweaked commit title; fixed region size to 0x200;
moved header file to include/]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
config_len in vhost_user_get_config() is defined by the device, so if
it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming
error. Turn the corresponding check into an assertion.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-6-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
Specifically, in vhost-user, EPROTO is used for all errors that relate
to the connection itself, whereas other error codes are used for errors
relating to the content of the connection. This will allow us later to
automatically reconnect when the connection goes away, without ending up
in an endless loop if it's a permanent error in the configuration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-3-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows callers to return better error messages instead of making
one up while the real error ends up on stderr. Most callers can
immediately make use of this because they already have an Error
parameter themselves. The others just keep printing the error with
error_report_err().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-2-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Fix MISA in the DisasContext
- Fix GDB CSR XML generation
- QOMify the SiFive UART
- Add support for the OpenTitan timer
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmDUc9oACgkQIeENKd+X
cFQnJQf/YJ1DcCc5HKnJD7dKOO7auWGrjcBydVLZpCKT/sBYO2m4+LcUoCkndJst
z2awR2sL6zgTqkpKTFJzENBKcXf0NOAvGvuvAznPQosvW26NhY20EsWHgRxn79DF
2CvFChD4J/aBZa/JwP7232CebsD2IqKn89gP5u6ldFNH36EGpzBRjFOroXLu98x3
arhr7AoyhTTpxcWkWuLW9YVwqZQ8xKKCVTMuqMC8SRI48FUB5+ndy3pTQqIjdoCg
U0wfJIrmPBakw3ik0nbNd47Lu/yxCQMU/O4M/flSbbC1GpomiUotlap9O3LlvNYo
7VeF8eS3/7Okn2/5jEwuFES+MmtUSQ==
=zVjG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210624-2' into staging
Third RISC-V PR for 6.1 release
- Fix MISA in the DisasContext
- Fix GDB CSR XML generation
- QOMify the SiFive UART
- Add support for the OpenTitan timer
# gpg: Signature made Thu 24 Jun 2021 13:00:26 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210624-2:
hw/riscv: OpenTitan: Connect the mtime and mtimecmp timer
hw/timer: Initial commit of Ibex Timer
hw/char/ibex_uart: Make the register layout private
hw/char: QOMify sifive_uart
hw/char: Consistent function names for sifive_uart
target/riscv: gdbstub: Fix dynamic CSR XML generation
target/riscv: Use target_ulong for the DisasContext misa
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As part of converting -smp to a property with a QAPI type, define
the struct and use it to do the actual parsing. machine_smp_parse
takes care of doing the QemuOpts->QAPI conversion by hand, for now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the smp_parse functions to use Error** instead of exiting.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to make SMP configuration a Machine property, we need a getter as
well as a setter. To simplify the implementation put everything that the
getter needs in the CpuTopology struct.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Connect the Ibex timer to the OpenTitan machine. The timer can trigger
the RISC-V MIE interrupt as well as a custom device interrupt.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 5e7f4e9b4537f863bcb8db1264b840b56ef2a929.1624001156.git.alistair.francis@wdc.com
Add support for the Ibex timer. This is used with the RISC-V
mtime/mtimecmp similar to the SiFive CLINT.
We currently don't support changing the prescale or the timervalue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 716fdea2244515ce86a2c46fe69467d013c03147.1624001156.git.alistair.francis@wdc.com
This QOMifies the SiFive UART model. Migration and reset have been
implemented.
Signed-off-by: Lukas Jünger <lukas.juenger@greensocs.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210616092326.59639-3-lukas.juenger@greensocs.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
-----BEGIN PGP SIGNATURE-----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=bMQp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210621' into staging
s390x update:
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
# gpg: Signature made Mon 21 Jun 2021 10:53:00 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210621: (37 commits)
s390x/css: Add passthrough IRB
s390x/css: Refactor IRB construction
s390x/css: Split out the IRB sense data
s390x/css: Introduce an ESW struct
linux-user/s390x: Save and restore psw.mask properly
target/s390x: Use s390_cpu_{set_psw, get_psw_mask} in gdbstub
target/s390x: Improve s390_cpu_dump_state vs cc_op
target/s390x: Do not modify cpu state in s390_cpu_get_psw_mask
target/s390x: Expose load_psw and get_psw_mask to cpu.h
configure: Check whether we can compile the s390-ccw bios with -msoft-float
s390x/cpumodel: Bump up QEMU model to a stripped-down IBM z14 GA2
s390x/tcg: We support Vector enhancements facility
linux-user: elf: s390x: Prepare for Vector enhancements facility
s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)
s390x/tcg: Implement VECTOR FP NEGATIVE MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP TEST DATA CLASS IMMEDIATE
s390x/tcg: Implement 32/128 bit for VECTOR FP PERFORM SIGN OPERATION
s390x/tcg: Implement 128 bit for VECTOR FP LOAD ROUNDED
s390x/tcg: Implement 64 bit for VECTOR FP LOAD LENGTHENED
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow code elsewhere in the system to check whether the ACPI GHES
table is present, so it can determine whether it is OK to try to
record an error by calling acpi_ghes_record_errors().
(We don't need to migrate the new 'present' field in AcpiGhesState,
because it is set once at system initialization and doesn't change.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-id: 20210603171259.27962-3-peter.maydell@linaro.org
Features:
* Add ratelimit for bus locks acquired in guest (Chenyi Qiang)
Documentation:
* SEV documentation updates (Tom Lendacky)
* Add a table showing x86-64 ABI compatibility levels (Daniel P. Berrangé)
Automated changes:
* Update Linux headers to 5.13-rc4 (Eduardo Habkost)
-----BEGIN PGP SIGNATURE-----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=YWGX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost-gl/tags/x86-next-pull-request' into staging
x86 queue, 2021-06-18
Features:
* Add ratelimit for bus locks acquired in guest (Chenyi Qiang)
Documentation:
* SEV documentation updates (Tom Lendacky)
* Add a table showing x86-64 ABI compatibility levels (Daniel P. Berrangé)
Automated changes:
* Update Linux headers to 5.13-rc4 (Eduardo Habkost)
# gpg: Signature made Fri 18 Jun 2021 20:51:26 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost-gl/tags/x86-next-pull-request:
scripts: helper to generate x86_64 CPU ABI compat info
docs: add a table showing x86-64 ABI compatibility levels
docs/interop/firmware.json: Add SEV-ES support
docs: Add SEV-ES documentation to amd-memory-encryption.txt
doc: Fix some mistakes in the SEV documentation
i386: Add ratelimit for bus locks acquired in guest
Update Linux headers to 5.13-rc4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wire in the subchannel callback for building the IRB
ESW and ECW space for passthrough devices, and copy
the hardware's ESW into the IRB we are building.
If the hardware presented concurrent sense, then copy
that sense data into the IRB's ECW space.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, all subchannel types have "sense data" copied into
the IRB.ECW space, and a couple flags enabled in the IRB.SCSW
and IRB.ESW. But for passthrough (vfio-ccw) subchannels,
this data isn't populated in the first place, so enabling
those flags leads to unexpected behavior if the guest tries to
process the sense data (zeros) in the IRB.ECW.
Let's add a subchannel callback that builds these portions of
the IRB, and move the existing code into a routine for those
virtual subchannels. The passthrough subchannels will be able
to piggy-back onto this later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Interrupt Response Block is comprised of several other
structures concatenated together, but only the 12-byte
Subchannel-Status Word (SCSW) is defined as a proper struct.
Everything else is a simple array of 32-bit words.
Let's define a proper struct for the 20-byte Extended-Status
Word (ESW) so that we can make good decisions about the sense
data that would go into the ECW area for virtual vs
passthrough devices.
[CH: adapted ESW definition to build with mingw, as discussed]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Leading underscores followed by a capital letter or underscore are
reserved by the C standard.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/369
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20210605174938.13782-1-email@aabouzied.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A bus lock is acquired through either split locked access to writeback
(WB) memory or any locked access to non-WB memory. It is typically >1000
cycles slower than an atomic operation within a cache and can also
disrupts performance on other cores.
Virtual Machines can exploit bus locks to degrade the performance of
system. To address this kind of performance DOS attack coming from the
VMs, bus lock VM exit is introduced in KVM and it can report the bus
locks detected in guest. If enabled in KVM, it would exit to the
userspace to let the user enforce throttling policies once bus locks
acquired in VMs.
The availability of bus lock VM exit can be detected through the
KVM_CAP_X86_BUS_LOCK_EXIT. The returned bitmap contains the potential
policies supported by KVM. The field KVM_BUS_LOCK_DETECTION_EXIT in
bitmap is the only supported strategy at present. It indicates that KVM
will exit to userspace to handle the bus locks.
This patch adds a ratelimit on the bus locks acquired in guest as a
mitigation policy.
Introduce a new field "bus_lock_ratelimit" to record the limited speed
of bus locks in the target VM. The user can specify it through the
"bus-lock-ratelimit" as a machine property. In current implementation,
the default value of the speed is 0 per second, which means no
restrictions on the bus locks.
As for ratelimit on detected bus locks, simply set the ratelimit
interval to 1s and restrict the quota of bus lock occurence to the value
of "bus_lock_ratelimit". A potential alternative is to introduce the
time slice as a property which can help the user achieve more precise
control.
The detail of bus lock VM exit can be found in spec:
https://software.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.html
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210521043820.29678-1-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The LUN is selected with an IDENTIFY message, and persists
until the next message out phase. Instead of passing it to
do_busid_cmd, store it in ESPState. Because do_cmd can simply
skip the message out phase if cmdfifo_cdb_offset is zero, it
can now be used for the S without ATN cases as well.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: M: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-4-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch implements the vq notification mapping support for
vhost-vDPA. This is simply done by using mmap()/munmap() for the
vhost-vDPA fd during device start/stop. For the device without
notification mapping support, we fall back to eventfd based
notification gracefully.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The OpenSBI BIOS image names are used by many RISC-V machines.
Let's define macros for them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The symbol address_space_memory are already declared in
include/exec/address-spaces.h. So let's add this header file
and remove the redundant declaration in include/hw/virtio/vhost-vdpa.h.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210517123246.999-1-xieyongji@bytedance.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When RSS is enabled the device tries to load the eBPF program
to select RX virtqueue in the TUN. If eBPF can be loaded
the RSS will function also with vhost (works with kernel 5.8 and later).
Software RSS is used as a fallback with vhost=off when eBPF can't be loaded
or when hash population requested by the guest.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We will need more than a single field for hvf going forward. To keep
the global vcpu struct uncluttered, let's allocate a special hvf vcpu
struct, similar to how hax does it.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-12-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The official punctuation for Arm CPU names uses a hyphen, like
"Cortex-A9". We mostly follow this, but in a few places usage
without the hyphen has crept in. Fix those so we consistently
use the same way of writing the CPU name.
This commit was created with:
git grep -z -l 'Cortex ' | xargs -0 sed -i 's/Cortex /Cortex-/'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210527095152.10968-1-peter.maydell@linaro.org
Currently we allow board models to specify the initial value of the
Secure VTOR register, using an init-svtor property on the TYPE_ARMV7M
object which is plumbed through to the CPU. Allow board models to
also specify the initial value of the Non-secure VTOR via a similar
init-nsvtor property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-10-peter.maydell@linaro.org
No more architectures set the pointer to dump_statistics, so there's no
point in keeping it, or the related cpu_dump_statistics function.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-6-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210531145629.21300-2-bruno.larsen@eldorado.org.br>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The subsequent patches add definitions which tend to get
the compilation to cyclic dependency. So, prepare with
forward declarations, move the definitions and clean up.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <162133925415.610.11584121797866216417.stgit@4f1e6f2bd33e>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU 6.0 moved all the -boot variables to the machine. Especially, the
removal of the boot_order static changed the handling of '-boot once'
from:
if (boot_once) {
qemu_boot_set(boot_once, &error_fatal);
qemu_register_reset(restore_boot_order, g_strdup(boot_order));
}
to
if (current_machine->boot_once) {
qemu_boot_set(current_machine->boot_once, &error_fatal);
qemu_register_reset(restore_boot_order,
g_strdup(current_machine->boot_order));
}
This means that we now register as subsequent boot order a copy
of current_machine->boot_once that was just set with the previous
call to qemu_boot_set(), i.e. we never transition away from the
once boot order.
It is certainly fragile^Wwrong for the spapr code to hijack a
field of the base machine type object like that. The boot order
rework simply turned this software boundary violation into an
actual bug.
Have the spapr code to handle that with its own field in
SpaprMachineState. Also kfree() the initial boot device
string when "once" was used.
Fixes: 4b7acd2ac8 ("vl: clean up -boot variables")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960119
Cc: pbonzini@redhat.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210521160735.1901914-1-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This API allows Qemu to set the blob allocated by the Guest as
the scanout buffer. If Opengl support is available, then the
scanout buffer would be submitted as a dmabuf to the UI; if not,
a pixman image is created from the scanout buffer and is
submitted to the UI via the display surface.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-14-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These helpers can be useful for creating dmabuf objects from blobs
and submitting them to the UI.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-12-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This API allows Qemu to register the blob allocated by the Guest
as a new resource and map its backing storage.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-10-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
