vhost backend sends host notification for every VQ. If backend creates
VQs in parallel, the VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG may
arrive to QEMU in different order than incremental queue index order.
For example VQ 1's message arrive earlier than VQ 0's:
After alloc VhostUserHostNotifier for VQ 1. GPtrArray becomes
[ nil, VQ1 pointer ]
After alloc VhostUserHostNotifier for VQ 0. GPtrArray becomes
[ VQ0 pointer, nil, VQ1 pointer ]
This is wrong. fetch_notifier will return NULL for VQ 1 in
vhost_user_get_vring_base, causes host notifier miss removal(leak).
The fix is to remove current element from GPtrArray, make the right
position for element to insert.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers")
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221018023651.1359420-1-yajunw@nvidia.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most other virtio-pci devices allow MSI-X, let's have it for rng too.
Signed-off-by: David Daney <david.daney@fungible.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20221014160947.66105-1-philmd@fungible.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtqueue reset feature for virtio-net
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221017092558.111082-16-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtqueue reset feature for vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-15-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support queue_enable in vhost-kernel scenario. It can be called when
a vq reset operation has been performed and the vq is restared.
It should be noted that we can restart the vq when the vhost has
already started. When launching a new vhost device, the vhost is not
started and all vqs are not initalized until VIRTIO_PCI_COMMON_STATUS
is written. Thus, we should use vhost_started to differentiate the
two cases: vq reset and device start.
Currently it only supports vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-14-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net and vhost-kernel implement queue reset.
Queued packets in the corresponding queue pair are flushed
or purged.
For virtio-net, userspace datapath will be disabled later in
__virtio_queue_reset(). It will set addr of vring to 0 and idx to 0.
Thus, virtio_net_receive() and virtio_net_flush_tx() will not receive
or send packets.
For vhost-net, the datapath will be disabled in vhost_net_virtqueue_reset().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-13-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the fucntion flush_or_purge_queued_packets(), it will be
used in device reset and virtqueue reset. Therefore, we extract the
common logic as a new function.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-12-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_net_virtqueue_restart(), which can restart the
specific virtqueue when the vhost net started running before.
If it fails to restart the virtqueue, the device will be stopped.
Here we do not reuse vhost_net_start_one() or vhost_dev_start()
because they work at queue pair level. The mem table and features
do not change, so we can call the vhost_virtqueue_start() to
restart a specific queue.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-11-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_virtqueue_reset(), which can reset the specific
virtqueue in the device. Then it will unmap vrings and the desc
of the virtqueue.
Here we do not reuse the vhost_net_stop_one() or vhost_dev_stop(),
because they work at queue pair level. We do not use
vhost_virtqueue_stop() because it may stop the device in the
backend.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Furthermore, we do not need net->nc->info->poll() because
it enables userspace datapath and we want to stop all
datapaths for this reset virtqueue here.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-10-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_stop(), we need to use it when resetting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-9-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_start(), we need to use it when restarting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-8-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices support device specific vq enable.
Based on this function, the driver can re-enable the virtqueue after the
virtqueue is reset.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-7-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices support vq reset.
Based on this function, the driver can adjust the size of the ring, and
quickly recycle the buffer in the ring.
The migration of the virtio devices will not happen during a reset
operation. This is becuase the global iothread lock is held. Migration
thread also needs the lock. As a result, when migration of virtio
devices starts, the 'reset' status of VirtIOPCIQueue will always be 0.
Thus, we do not need to add it in vmstate_virtio_pci_modern_queue_state.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-6-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A a new command line parameter "queue_reset" is added.
Meanwhile, the vq reset feature is disabled for pre-7.2 machines.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-5-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the interface queue_enable() in VirtioDeviceClass and the
fucntion virtio_queue_enable() in virtio, it can be called when
VIRTIO_PCI_COMMON_Q_ENABLE is written and related virtqueue can be
started. It only supports the devices of virtio 1 or later. The
not-supported devices can only start the virtqueue when DRIVER_OK.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-4-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new interface function virtio_queue_reset() to implement
reset for vq.
Add a new callback to VirtioDeviceClass for queue reset operation for
each child device.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-3-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of vq reset. This logic will be called directly
later.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-2-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In theory the virtio-iommu-pci could be plugged anywhere in the PCIe
topology and as long as the dt/acpi info are properly built this should
work. However at the moment we fail to do that because the
virtio-iommu-pci BDF is not computed at plug time and in that case
vms->virtio_iommu_bdf gets an incorrect value.
For instance if the virtio-iommu-pci is plugged onto a pcie root port
and the virtio-iommu protects a virtio-block-pci device the guest does
not boot.
So let's do not pretend we do support this case and fail the initialize()
if we detect the virtio-iommu-pci is plugged anywhere else than on the
root bus. Anyway this ability is not needed.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221012163448.121368-1-eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This Data Object Exchange Mailbox allows software to query the
latency and bandwidth between ports on the switch. For now
only provide information on routes between the upstream port and
each downstream port (not p2p).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
Changes since v8: Mostly to match the type 3 equivalent
- Move enum out of function and give it a more descriptive namespace.
Message-Id: <20221014151045.24781-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The CDAT can be specified in two ways. One is to add ",cdat=<filename>"
in "-device cxl-type3"'s command option. The file is required to provide
the whole CDAT table in binary mode. The other is to use the default
that provides some 'reasonable' numbers based on type of memory and
size.
The DOE capability supporting CDAT is added to hw/mem/cxl_type3.c with
capability offset 0x190. The config read/write to this capability range
can be generated in the OS to request the CDAT data.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Data Object Exchange implementation of CXL Coherent Device Attribute
Table (CDAT). This implementation is referring to "Coherent Device
Attribute Table Specification, Rev. 1.03, July. 2022" and "Compute
Express Link Specification, Rev. 3.0, July. 2022"
This patch adds core support that will be shared by both
end-points and switch port emulation.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be used by several upcoming patch sets so break it out
such that it doesn't matter which one lands first.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Emulation of PCIe Data Object Exchange (DOE)
PCIE Base Specification r6.0 6.3 Data Object Exchange
Supports multiple DOE PCIe Extended Capabilities for a single PCIe
device. For each capability, a static array of DOEProtocol should be passed
to pcie_doe_init(). The protocols in that array will be registered under
the DOE capability structure. For each protocol, vendor ID, type, and
corresponding callback function (handle_request()) should be implemented.
This callback function represents how the DOE request for corresponding
protocol will be handled.
pcie_doe_{read/write}_config() must be appended to corresponding PCI
device's config_read/write() handler to enable DOE access. In
pcie_doe_read_config(), false will be returned if pci_config_read()
offset is not within DOE capability range. In pcie_doe_write_config(),
the function will have no affect if the address is not within the related
DOE PCIE extended capability.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MADT has been updated with the GIC Structures from ACPI 6.0 Errata A
and so MADT revision and GICC Structure must be updated also.
Fixes: 37f33084ed ("acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table")
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221011181730.10885-4-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Update the Fixed ACPI Description Table (FADT) to revision 6.0 of the ACPI
specification adding the field "Hypervisor Vendor Identity".
This field's description states the following: "64-bit identifier of hypervisor
vendor. All bytes in this field are considered part of the vendor identity.
These identifiers are defined independently by the vendors themselves,
usually following the name of the hypervisor product. Version information
should NOT be included in this field - this shall simply denote the vendor's
name or identifier. Version information can be communicated through a
supplemental vendor-specific hypervisor API. Firmware implementers would
place zero bytes into this field, denoting that no hypervisor is present in
the actual firmware."
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221011181730.10885-3-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Step 3 from bios-tables-test.c documented procedure.
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20221011181730.10885-2-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
* bug fixes for -Wextra
* fix gdb XML for 32-bit x86
* improve error handling for module load
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNndPcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOVVwf+Nfvx9aoDTo6vU4kHmCbh7+BTtcUA
qEkaccL4pfujwNfRl5gHHKtRhgT6py9OjfIX8pAck3jtc5r+5/niFn7CLcOP2G/C
xuyVKPx3ONCMKCLjWwg63I8/t4JZDEnYEzyddAfV7Xb5600aUJlrxScW751K5eYQ
CzHFAASdc00eSiWE2eFL4rV7dcj0NadHnJxfjUcguHX4Qlr1TmK/ihEGv6MMRo5S
9Ak/vLmRs+LsQJm2cXUu5QVQiDwp31xbv3AP9knB+irYxrsp4LSDxV8eKZwLehpW
I4A3gz2xKAprfzVJKZI3Dc/hJSRpoKoCjz+QoI1NeVbWjsnYZAwD+VMSew==
=Nroy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* bug fixes for Win32 event loop
* bug fixes for -Wextra
* fix gdb XML for 32-bit x86
* improve error handling for module load
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNndPcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOVVwf+Nfvx9aoDTo6vU4kHmCbh7+BTtcUA
# qEkaccL4pfujwNfRl5gHHKtRhgT6py9OjfIX8pAck3jtc5r+5/niFn7CLcOP2G/C
# xuyVKPx3ONCMKCLjWwg63I8/t4JZDEnYEzyddAfV7Xb5600aUJlrxScW751K5eYQ
# CzHFAASdc00eSiWE2eFL4rV7dcj0NadHnJxfjUcguHX4Qlr1TmK/ihEGv6MMRo5S
# 9Ak/vLmRs+LsQJm2cXUu5QVQiDwp31xbv3AP9knB+irYxrsp4LSDxV8eKZwLehpW
# I4A3gz2xKAprfzVJKZI3Dc/hJSRpoKoCjz+QoI1NeVbWjsnYZAwD+VMSew==
# =Nroy
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 06 Nov 2022 03:48:55 EST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
accel: abort if we fail to load the accelerator plugin
dmg: warn when opening dmg images containing blocks of unknown type
module: add Error arguments to module_load and module_load_qom
module: rename module_load_one to module_load
module: removed unused function argument "mayfail"
Add missing include statement for global xml_builtin
meson: avoid unused arguments of main() in compiler tests
Fix broken configure with -Wunused-parameter
gdb-xml: Fix size of EFER register on i386 architecture when debugged by GDB
util/aio-win32: Correct the event array size in aio_poll()
util/main-loop: Avoid adding the same HANDLE twice
util/main-loop: Fix maximum number of wait objects for win32
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Regarding the patchset v3 has been merged into main line, and not
approved, this patch updates to patchset v4.
Fixes: 2419978c ("target/loongarch: Fix emulation of float-point disable exception")
Link: https://lists.nongnu.org/archive/html/qemu-devel/2022-11/msg00808.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Message-Id: <20221107024526.702297-3-wangrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Regarding the patchset v3 has been merged into main line, and not
approved, this patch updates to patchset v4.
Fixes: b4bda200 ("target/loongarch: Adjust the layout of hardware flags bit fields")
Link: https://lists.nongnu.org/archive/html/qemu-devel/2022-11/msg00808.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Message-Id: <20221107024526.702297-2-wangrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The S390 CPU topology accepts the smp.threads argument while
in reality it does not effectively allow multthreading.
Let's keep this behavior for machines older than 7.2 and
refuse to use threads in newer machines until multithreading
is really exposed to the guest by the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20221103170150.20789-3-pmorel@linux.ibm.com>
[thuth: Small fixes to the commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, when running 'qemu-system-s390x -M s390-ccw-virtio,help'
the s390x-specific properties are not listed anymore. This happens
because since commit d8fb7d0969 ("vl: switch -M parsing to keyval")
the properties have to be defined at the class level and not at the
instance level anymore. Fix it on s390x now, too, by moving the
registration of the properties to the class level"
Fixes: d8fb7d0969 ("vl: switch -M parsing to keyval")
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20221103170150.20789-2-pmorel@linux.ibm.com>
[thuth: Add patch description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we encounter a new mapping while the number of available DMA entries
in vfio is 0, we are currently skipping that mapping which is a problem
if we manage to free up DMA space after that within the same RPCIT --
we will return to the guest with CC0 and have not mapped everything
within the specified range. This issue was uncovered while testing
changes to the s390 linux kernel iommu/dma code, where a different
usage pattern was employed (new mappings start at the end of the
aperture and work back towards the front, making us far more likely
to encounter new mappings before invalidated mappings during a
global refresh).
Fix this by tracking whether any mappings were skipped due to vfio
DMA limit hitting 0; when this occurs, we still continue the range
and unmap/map anything we can - then we must re-run the range again
to pickup anything that was missed. This must occur in a loop until
all requests are satisfied (success) or we detect that we are still
unable to complete all mappings (return ZPCI_RPCIT_ST_INSUFF_RES).
Link: https://lore.kernel.org/linux-s390/20221019144435.369902-1-schnelle@linux.ibm.com/
Fixes: 37fa32de70 ("s390x/pci: Honor DMA limits set by vfio")
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-2-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Revert the control and flag bits in the subchannel status word in case
the SSCH operation fails with non-zero CC (ditto for CSCH and HSCH).
According to POPS, the control and flag bits are only changed if SSCH,
CSCH, and HSCH return CC 0, and no other action should be taken otherwise.
In order to simulate that after the fact, the bits need to be reverted on
non-zero CC.
While the do_subchannel_work logic for virtual (virtio) devices will
return condition code 0, passthrough (vfio) devices may encounter
errors from either the host kernel or real hardware that need to be
accounted for after this point. This includes restoring the state of
the Subchannel Status Word to reflect the subchannel, as these bits
would not be set in the event of a non-zero condition code from the
affected instructions.
Experimentation has shown that a failure on a START SUBCHANNEL (SSCH)
to a passthrough device would leave the subchannel with the START
PENDING activity control bit set, thus blocking subsequent SSCH
operations in css_do_ssch() until some form of error recovery was
undertaken since no interrupt would be expected.
Signed-off-by: Peter Jin <pjin@linux.ibm.com>
Message-Id: <20221027212341.2904795-1-pjin@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
[thuth: Updated the commit description to Eric's suggestion]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The clang-user test exceeds the 1 hour timeout occassionally.
Philippe Mathieu-Daudé has pointed out that the number of tcg tests has
increased since QEMU 7.1. The execution time therefore probably reflects
a legitimate increase in tests rather than a performance regression.
Bump the timeout to prevent CI failures.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221104113659.427690-1-stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit f1018ea0a3 ("tests: avoid DOS line endings in PSK file"),
the bug of the helper test_tls_psk_init_common() that caused TLS PSK
tests to fail on Windows was fixed. Let's enable these tests on win32.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221101035021.729669-1-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105115525.623059-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There were still some constants defined in e1000_regs.h.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221105053010.38037-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nemonics E1000_STATUS_LAN_INIT_DONE and E1000_STATUS_ASDV_1000 have
the same value, and E1000_STATUS_ASDV_1000 should be used here because
E1000_STATUS_ASDV_1000 represents the auto-detected speed tested here
while E1000_STATUS_LAN_INIT_DONE is a value used for a different purpose
with a variant of e1000e family different from the one implemented in
QEMU.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103083425.100590-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The register definitions in tests/qtest/e1000e-test.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103095416.110162-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The later device status check depends on E1000_STATUS_LU, which is
enabled by E1000_CTRL_SLU. Though E1000_STATUS_LU is not implemented
and E1000_STATUS_LU is always available in the current implementation,
be a bit nicer and set E1000_CTRL_SLU just in case the bit is
implemented in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103025451.27446-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is yet another minor cleanup to ease understanding and
future refactoring of the tests.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103015017.19947-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
if QEMU is configured with modules enabled, it is possible that the
load of an accelerator module will fail.
Exit in this case, relying on module_object_class_by_name to report
the specific load error if any.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: changed abort() to exit(1)]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220929093035.4231-6-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-5-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
improve error handling during module load, by changing:
bool module_load(const char *prefix, const char *lib_name);
void module_load_qom(const char *type);
to:
int module_load(const char *prefix, const char *name, Error **errp);
int module_load_qom(const char *type, Error **errp);
where the return value is:
-1 on module load error, and errp is set with the error
0 on module or one of its dependencies are not installed
1 on module load success
2 on module load success (module already loaded or built-in)
module_load_qom_one has been introduced in:
commit 28457744c3 ("module: qom module support"), which built on top of
module_load_one, but discarded the bool return value. Restore it.
Adapt all callers to emit errors, or ignore them, or fail hard,
as appropriate in each context.
Replace the previous emission of errors via fprintf in _some_ error
conditions with Error and error_report, so as to emit to the appropriate
target.
A memory leak is also fixed as part of the module_load changes.
audio: when attempting to load an audio module, report module load errors.
Note that still for some callers, a single issue may generate multiple
error reports, and this could be improved further.
Regarding the audio code itself, audio_add() seems to ignore errors,
and this should probably be improved.
block: when attempting to load a block module, report module load errors.
For the code paths that already use the Error API, take advantage of those
to report module load errors into the Error parameter.
For the other code paths, we currently emit the error, but this could be
improved further by adding Error parameters to all possible code paths.
console: when attempting to load a display module, report module load errors.
qdev: when creating a new qdev Device object (DeviceState), report load errors.
If a module cannot be loaded to create that device, now abort execution
(if no CONFIG_MODULE) or exit (if CONFIG_MODULE).
qom/object.c: when initializing a QOM object, or looking up class_by_name,
report module load errors.
qtest: when processing the "module_load" qtest command, report errors
in the load of the module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mayfail is always passed as false for every invocation throughout the program.
It controls whether to printf or not to printf an error on
g_module_open failure.
Remove this unused argument.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929093035.4231-2-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes some compiler warnings with compiler flag
-Wmissing-variable-declarations (tested with clang):
aarch64_be-linux-user-gdbstub-xml.c:564:19: warning: no previous extern declaration for non-static variable 'xml_builtin' [-Wmissing-variable-declarations]
aarch64-linux-user-gdbstub-xml.c:564:19: warning: no previous extern declaration for non-static variable 'xml_builtin' [-Wmissing-variable-declarations]
aarch64-softmmu-gdbstub-xml.c:1763:19: warning: no previous extern declaration for non-static variable 'xml_builtin' [-Wmissing-variable-declarations]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
