By a mistake this constant was defined twice - remove the duplication.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-7-marcel.apfelbaum@gmail.com>
Coverity (CID1390589, CID1390608).
Array size is RDMA_BAR1_REGS_SIZE, let's make sure the given address is
in range.
While there also:
1. Adjust the size of this bar to reasonable size
2. Report the size of the array with sizeof(array)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-6-marcel.apfelbaum@gmail.com>
Array size is MAX_PORT_GIDS, let's make sure the given index is in
range.
While there limit device table size to 1.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-5-marcel.apfelbaum@gmail.com>
Support for PKEY is not yet implemented. Removing the unneeded table
until a support will be added.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-4-marcel.apfelbaum@gmail.com>
Coverity CID 1390586; The cq handle is provided by the guest
and cannot be trusted to be previuosly allocated.
Fix it by exiting the completion flow.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180430200223.4119-3-marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename the loadparm char array in main.c to loadparm_str and
increased the size by one byte to account for a null termination
when converting the loadparm string to an int via atoui. We
also allow the boot menu to be enabled when loadparm is set to
an empty string or a series of spaces.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't print the tv_nsec part of atime and mtime, to stay below the 10
argument limit of trace events.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The consoles ("sclpconsole" and "sclplmconsole") can only be configured
with "-device" and "-chardev" so far. Other machines use the convenience
option "-serial" to configure the default consoles, even for virtual
consoles like spapr-vty on the pseries machine. So let's support this
option on s390x, too. This way we can easily enable the serial console
here again with "-nodefaults", for example:
qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio
... which is way shorter than typing:
qemu-system-s390x -no-shutdown -nographic -nodefaults \
-chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \
-mon chardev=c1
The -serial parameter can also be used if you only want to see the QEMU
monitor on stdio without using -nodefaults, but not the console output.
That's something that is pretty impossible with the current code today:
qemu-system-s390x -no-shutdown -nographic -serial none
While we're at it, this patch also maps the second -serial option to the
"sclplmconsole", so that there is now an easy way to configure this second
console on s390x, too, for example:
qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio
Additionally, the new code is also smaller than the old one and we have
less s390x-specific code in vl.c :-)
I've also checked that migration still works as expected by migrating
a guest with console output back and forth between a qemu-system-s390x
that has this patch and an instance without this patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have a call to cpu_synchronize_state() on every kvm_arch_handle_exit().
Let's remove the ones that are no longer needed.
Remaining places (for s390x) are in
- target/s390x/sigp.c, on the target CPU
- target/s390x/cpu.c:s390_cpu_get_crash_info()
While at it, use kvm_cpu_synchronize_state() instead of
cpu_synchronize_state() in KVM code. (suggested by Thomas Huth)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180412093521.2469-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
A recent patch fixed leaks of the dynamically allocated vcdev->vdev.name
field in vfio_ccw_realize(), but we now have three freeing sites for it.
This is unfortunate and seems to indicate something is wrong with its
life cycle.
The root issue is that vcdev->vdev.name is set before vfio_get_device()
is called, which theoretically prevents to call vfio_put_device() to
do the freeing. Well actually, we could call it anyway because
vfio_put_base_device() is a nop if the device isn't attached, but this
would be confusing.
This patch hence moves all the logic of attaching the device, including
the "already attached" check, to a separate vfio_ccw_get_device() function,
counterpart of vfio_put_device(). While here, vfio_put_device() is renamed
to vfio_ccw_put_device() for consistency.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152326891065.266543.9487977590811413472.stgit@bahia.lan>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Extend the SCLP event masks to 64 bits.
Notice that using any of the new bits results in a state that cannot be
migrated to an older version.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1520507069-22179-1-git-send-email-imbrenda@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
During guest OS reboot, guest framebuffer is invalid. It will cause
bugs, if the invalid guest framebuffer is still used by host.
This patch is to introduce vfio_display_reset which is invoked
during vfio display reset. This vfio_display_reset function is used
to release the invalid display resource, disable scanout mode and
replace the invalid surface with QemuConsole's DisplaySurafce.
This patch can fix the GPU hang issue caused by gd_egl_draw during
guest OS reboot.
Changes v3->v4:
- Move dma-buf based display check into the vfio_display_reset().
(Gerd)
Changes v2->v3:
- Limit vfio_display_reset to dma-buf based vfio display. (Gerd)
Changes v1->v2:
- Use dpy_gfx_update_full() update screen after reset. (Gerd)
- Remove dpy_gfx_switch_surface(). (Gerd)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Message-id: 1524820266-27079-3-git-send-email-tina.zhang@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When trying to build with latest libcacard-2.5.1, I hit the
following error:
In file included from hw/usb/ccid-card-passthru.c:12:0:
/usr/include/cacard/vscard_common.h:26:2: error: #warning "Only <libcacard.h> can be included directly" [-Werror=cpp]
#warning "Only <libcacard.h> can be included directly"
While it was fixed in libcacard upstream (so that individual
files can be included directly), it doesn't make much sense.
Let's switch to including the main libcacard.h and also require
at least libcacard-2.5.1 which introduced it. It's available
since late 2015.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 3c36db1dc0702763ebb7966cc27428ed67d43804.1522751624.git.mprivozn@redhat.com
[ kraxel: fix include path ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
libusb-1.0.22 marked libusb_set_debug deprecated
it is replaced with
libusb_set_option(libusb_context, LIBUSB_OPTION_LOG_LEVEL, libusb_log_level);
details here: 539f22e2fd
Warning here:
CC hw/usb/host-libusb.o
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c: In function 'usb_host_init':
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c:250:5: error: 'libusb_set_debug' is deprecated: Use libusb_set_option instead [-Werror=deprecated-declarations]
libusb_set_debug(ctx, loglevel);
^~~~~~~~~~~~~~~~
In file included from /builds/xen/src/qemu-xen/hw/usb/host-libusb.c:40:0:
/usr/include/libusb-1.0/libusb.h:1300:18: note: declared here
void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/builds/xen/src/qemu-xen/rules.mak:66: hw/usb/host-libusb.o] Error 1
make: Leaving directory '/builds/xen/src/xen/tools/qemu-xen-build'
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Message-id: 20180405132046.4968-1-git@johnthomson.fastmail.com.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit d7d218ef02 attempted to change
dwProtocols to only advertise support for T=0 and not T=1. The change
was incorrect as it changed 0x00000003 to 0x00010000.
lsusb -v in a linux guest shows:
"dwProtocols 65536 (Invalid values detected)", though the
smart card could still be accessed. Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:
Source: Smart Card Service
Event ID: 610
Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
Incorrect function. If this error persists, your smart card or reader
may not be functioning correctly
Command Header: 03 00 00 00
Setting to 0x00000001 fixes the Windows issue.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Although the order doesn't really matter at the moment, it's possible
other initializastions could depend on the compatiblity mode, so make sure
we set it first in spapr_cpu_reset().
While we're at it drop the test against first_cpu. Setting the compat mode
to the value it already has is redundant, but harmless, so we might as well
make a small simplification to the code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
The new property ibm,dynamic-memory-v2 allows memory to be represented
in a more compact manner in device tree.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert PPCE500Params to PCCE500MachineClass which it essentially is,
and introduce PCCE500MachineState to keep track of E500 specific
state instead of adding global variables or extra parameters to
functions when we need to keep data beyond machine init
(i.e. make it look like typical fully defined machine).
It's pretty shallow conversion instead of currently used trivial
DEFINE_MACHINE() macro. It adds extra 60LOC of boilerplate code
of full machine definition.
The patch on top[1] will use PCCE500MachineState to keep track of
platform_bus device and add E500Plate specific machine class
to use HOTPLUG_HANDLER for explicitly initializing dynamic
sysbus devices at the time they are added instead of delaying
it to machine done time by platform_bus_init_notify() which is
being removed.
1) <1523551221-11612-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now recent kernels (i.e. since linux-stable commit a346137e9142
("powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes")
support this property to mark initially memory-less NUMA nodes as "possible"
to allow further memory hot-add to them.
Advertise this property for pSeries machines to let guest kernels detect
maximum supported node configuration and benefit from kernel side change
when hot-add memory to specific, possibly empty before, NUMA node.
Signed-off-by: Serhii Popovych <spopovyc@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The env->slb_nr field gives the size of the SLB (Segment Lookaside Buffer).
This is another static-after-initialization parameter of the specific
version of the 64-bit hash MMU in the CPU. So, this patch folds the field
into PPCHash64Options with the other hash MMU options.
This is a bit more complicated that the things previously put in there,
because slb_nr was foolishly included in the migration stream. So we need
some of the usual dance to handle backwards compatible migration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
The ci_large_pages boolean in CPUPPCState is only relevant to 64-bit hash
MMU machines, indicating whether it's possible to map large (> 4kiB) pages
as cache-inhibitied (i.e. for IO, rather than memory). Fold it as another
flag into the PPCHash64Options structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently env->mmu_model is a bit of an unholy mess of an enum of distinct
MMU types, with various flag bits as well. This makes which bits of the
field should be compared pretty confusing.
Make a start on cleaning that up by moving two of the flags bits -
POWERPC_MMU_1TSEG and POWERPC_MMU_AMR - which are specific to the 64-bit
hash MMU into a new flags field in PPCHash64Options structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
env->sps contains page size encoding information as an embedded structure.
Since this information is specific to 64-bit hash MMUs, split it out into
a separately allocated structure, to reduce the basic env size for other
cpus. Along the way we make a few other cleanups:
* Rename to PPCHash64Options which is more in line with qemu name
conventions, and reflects that we're going to merge some more hash64
mmu specific details in there in future. Also rename its
substructures to match qemu conventions.
* Move structure definitions to the mmu-hash64.[ch] files.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
As a rule we prefer to pass PowerPCCPU instead of CPUPPCState, and this
change will make some things simpler later on.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Since commit 7da79a167a, the machine class init function registers
dynamic sysbus device types it supports. Passing an unsupported device
type on the command line causes QEMU to exit with an error message
just after machine init.
It is hence not needed to do the same sanity check at machine reset.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit b556854bd8.
Leave change @node type from uint32_t to to int from reverted commit
because node < 0 is always false.
Note that implementing capability or some trick to detect if guest
kernel does not support hot-add to memory: this returns previous
behavour where memory added to first non-empty node.
Signed-off-by: Serhii Popovych <spopovyc@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Both spapr_irq_alloc() and spapr_irq_alloc_block() have an errp
parameter, but they don't use it if XICS hasn't been initialized
yet.
This is doubly wrong:
- all callers do pass a non-null Error **, ie, they expect an error
to be propagated in case of failure
- XICS obviously needs to be initialized before anything starts allocating
IRQs
So this patch turns the check into an assert.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The existing UNINState actually represents the PCI/AGP host bridge stage so
rename it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Do this for both the uninorth main and uninorth u3 AGP buses, using the main
PCI bus for each machine (this ensures the IO addresses still match those
used by OpenBIOS).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the OpenPIC is wired up via the board, we can now remove our temporary
PIC qdev pointer property and replace it with an object link instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up the PCI/AGP host bridges in mac_newworld.c. Now this is complete
it is possible to move the initialisation of the PCI hole alias into
pci_u3_agp_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up the PCI/AGP host bridges in mac_newworld.c. Now this is complete
it is possible to move the initialisation of the PCI hole alias into
pci_unin_main_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Somewhere in the history of time, the initialisation of the PCI buses for the
AGP and PCI host bridges got mixed up in that the PCI host bridge was
creating an instance of the AGP PCI bus, and the AGP PCI bus was missing.
Swap the PCI host bridge over to use the correct PCI bus (including setting
the kMacRISCPCIAddressSelect register used by MacOS X) and add the missing
reference to the AGP PCI bus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since the IO address space is fixed to use the standard system IO address
space then we can also use the opportunity to remove the address_space_io
parameter from pci_pmac_init() and pci_pmac_u3_init().
Note we also move the default mac99 PCI bus to the end of the initialisation
list so that it becomes the default destination for any devices specified
via -device without an explicit PCI bus provided.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for moving the PCI bus wiring inside the uninorth
host bridge devices. In the future it will be possible to remove this once the
PICs have been switched to use qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Whilst we are here, rename the memory regions to better reflect whether they
belong to either a PCI or an AGP bus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since the macio device has a link to the PIC device, we can now wire up the
IRQs directly via qdev GPIOs rather than having to use an intermediate array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce constants for the pre-defined Old World IRQs to help keep things
readable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This simplifies the Old World machine to simply mapping the ISA memory region
into the main address space.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up the grackle device inside the Mac Old World machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the first step towards removing the old-style pci_grackle_init()
function. Following on from the previous commit we can now pass the heathrow
device as an object link and wire up the heathrow IRQs via qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up heathrow to the CPU and grackle PCI host using qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for moving the device wiring into the New World machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
[dwg: Added hw/hw.h #include as suggested by Philippe Mathieu-Daudé]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
After QOMification this is clearly no longer needed (and possibly hasn't been
for some time).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 593c181160: "PPC: Newworld: Add second uninorth control register set"
added a second set of uninorth registers at 0xf3000000.
Testing MacOS 9.2 to MacOS X 10.4 reveals no accesses to this address and I
can't find any reference to it in Apple's Core99.cpp source so I'm assuming
that this was the result of another bug that has now been fixed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This makes sure we keep patchew/checkpatch happy during the remainder of this
patchset.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Saving the current state to xenstore may fail when running restricted
(in particular, after a migration). Therefore, don't report the error or
exit when running restricted. Toolstacks that want to allow running
QEMU restricted should instead make use of QMP events to listen for
state changes.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Xen unstable (to be in 4.11) has two new dmops, relocate_memory and
pin_memory_cacheattr. Use these to set up the VGA memory, replacing the
previous calls to libxc. This allows the VGA console to work properly
when QEMU is running restricted (-xen-domid-restrict).
Wrapper functions are provided to allow QEMU to work with older versions
of Xen.
Tweak the error handling while making this change:
* Report pin_memory_cacheattr errors.
* Report errors even when DEBUG_HVM is not set. This is useful for
trying to understand why VGA is not working, since otherwise it just
fails silently.
* Fix the return values when an error occurs. The functions now
consistently return -1 and set errno.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
xc_interface_open etc. is not going to work if we have dropped
privilege, but xendevicemodel_shutdown will if everything is new
enough.
xendevicemodel_shutdown is only availabe in Xen 4.10 and later, so
provide a stub for earlier versions.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
We are going to want to reuse this.
No functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
We need to restrict *all* the control fds that qemu opens. Looking in
/proc/PID/fd shows there are many; their allocation seems scattered
throughout Xen support code in qemu.
We must postpone the restrict call until roughly the same time as qemu
changes its uid, chroots (if applicable), and so on.
There doesn't seem to be an appropriate hook already. The RunState
change hook fires at different times depending on exactly what mode
qemu is operating in.
And it appears that no-one but the Xen code wants a hook at this phase
of execution. So, introduce a bare call to a new function
xen_setup_post, just before os_setup_post. Also provide the
appropriate stub for when Xen compilation is disabled.
We do the restriction before rather than after os_setup_post, because
xen_restrict may need to open /dev/null, and os_setup_post might have
called chroot.
Currently this does not work with migration, because when running as
the Xen device model qemu needs to signal to the toolstack that it is
ready. It currently does this using xenstore, and for incoming
migration (but not for ordinary startup) that happens after
os_setup_post.
It is correct that this happens late: we want the incoming migration
stream to be processed by a restricted qemu. The fix for this will be
to do the startup notification a different way, without using
xenstore. (QMP is probably a reasonable choice.)
So for now this restriction feature cannot be used in conjunction with
migration. (Note that this is not a regression in this patch, because
previously the -xen-restrict-domid call was, in fact, simply
ineffective!) We will revisit this in the Xen 4.11 release cycle.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
CC: Richard Henderson <rth@twiddle.net> (maintainer:X86)
CC: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
CC: Michael S. Tsirkin <mst@redhat.com> (supporter:PC)
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Create a new function serial_max_hds() which returns the number of
serial ports defined by the user. This is needed only by spapr.
This allows us to remove the MAX_SERIAL_PORTS define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-14-peter.maydell@linaro.org
The ISA serial port handling in serial-isa.c imposes a limit
of 4 serial ports. This is because we only know of 4 IO port
and IRQ settings for them, and is unrelated to the generic
MAX_SERIAL_PORTS limit, though they happen to both be set at
4 currently.
Use a new MAX_ISA_SERIAL_PORTS wherever that is the correct
limit to be checking against.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-11-peter.maydell@linaro.org
The handling of NULL chardevs in exynos4210_uart_create() is now
all unnecessary: we don't need to create 'null' chardevs, and we
don't need to enforce a bounds check on serial_hd().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-10-peter.maydell@linaro.org
Remove checks on MAX_SERIAL_PORTS that were just checking whether
they were within bounds for the serial_hds[] array and falling
back to NULL if not. This isn't needed with the serial_hd()
function, which returns NULL for all indexes beyond what the
user set up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-9-peter.maydell@linaro.org
Change all the uses of serial_hds[] to go via the new
serial_hd() function. Code change produced with:
find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
Following commit 12051d82f0, UART devices should handle
being passed a NULL pointer chardev, so we don't need to
create "null" backends in board code. Remove the code that
does this and updates serial_hds[].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-6-peter.maydell@linaro.org
Following commit 12051d82f0, UART devices should handle
being passed a NULL pointer chardev, so we don't need to
create "null" backends in board code. Remove the code that
does this and updates serial_hds[].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-5-peter.maydell@linaro.org
Following commit 12051d82f0, UART devices should handle
being passed a NULL pointer chardev, so we don't need to
create "null" backends in board code. Remove the code that
does this and updates serial_hds[].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-4-peter.maydell@linaro.org
Following commit 12051d82f0, UART devices should handle
being passed a NULL pointer chardev, so we don't need to
create "null" backends in board code. Remove the code that
does this and updates serial_hds[].
(fsl-imx7.c was already written this way.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-3-peter.maydell@linaro.org
Currently the serial.c realize code has an explicit check that it is not
connected to a disconnected backend (ie one with a NULL chardev).
This isn't what we want -- you should be able to create a serial device
even if it isn't attached to anything. Remove the check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-2-peter.maydell@linaro.org
SNOOP_NONE state handle is moved above in the if ladder, as it's same
as SNOOP_STRIPPING during data cycles.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 1524119244-1240-1-git-send-email-saipava@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit 1d3e65aa7a ("hw/timer: Add value matching support to
aspeed_timer") increased the vmstate version of aspeed.timer because
the state had changed, but it also bumped the version of the
VMSTATE_STRUCT_ARRAY under the aspeed.timerctrl which did not need to.
Change back this version to fix migration.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180423101433.17759-1-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we use vmstate_register_ram_global() for the SRAM;
this is not a good idea for devices, because it means that
you can only ever create one instance of the device, as
the second instance would get a RAM block name clash.
Instead, use memory_region_init_ram(), which automatically
registers the RAM block with a local-to-the-device name.
Note that this would be a cross-version migration compatibility break
for the "palmetto-bmc", "ast2500-evb" and "romulus-bmc" machines,
but migration is currently broken for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180420124835.7268-4-peter.maydell@linaro.org
Currently we use memory_region_init_ram_nomigrate() to create
the "aspeed.boot_rom" memory region, and we don't manually
register it with vmstate_register_ram(). This currently
means that its contents are migrated but as a ram block
whose name is the empty string; in future it may mean they
are not migrated at all. Use memory_region_init_ram() instead.
Note that would be a cross-version migration compatibility break
for the "palmetto-bmc", "ast2500-evb" and "romulus-bmc" machines,
but migration is currently broken for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180420124835.7268-3-peter.maydell@linaro.org
Currently we use memory_region_init_ram_nomigrate() to create
the "highbank.sysram" memory region, and we don't manually
register it with vmstate_register_ram(). This currently
means that its contents are migrated but as a ram block
whose name is the empty string; in future it may mean they
are not migrated at all. Use memory_region_init_ram() instead.
Note that this is a cross-version migration compatibility
break for the "highbank" and "midway" machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180420124835.7268-2-peter.maydell@linaro.org
In commit 210f47840d, we changed the bcm2836 SoC object to
always create a CPU of the correct type for that SoC model. This
makes the default_cpu_type settings in the MachineClass structs
for the raspi2 and raspi3 boards redundant. We didn't change
those at the time because it would have meant a temporary
regression in a corner case of error handling if the user
requested a non-existing CPU type. The -cpu parse handling
changes in 2278b93941 mean that it no longer implicitly
depends on default_cpu_type for this to work, so we can now
delete the redundant default_cpu_type fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420155547.9497-1-peter.maydell@linaro.org
This eliminates the need for fetching it from el_change_hook_opaque, and
allows for supporting multiple el_change_hooks without having to hack
something together to find the registered opaque belonging to GICv3.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1523997485-1905-6-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
if arm_load_kernel() were passed non first_cpu, QEMU would end up
with partially set do_cpu_reset() callback leaving some CPUs without it.
Make sure that do_cpu_reset() is registered for all CPUs by enumerating
CPUs from first_cpu.
(In practice every board that we have was passing us the first CPU
as the boot CPU, either directly or indirectly, so this wasn't
causing incorrect behaviour.)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added a note that this isn't a behaviour change]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When IOMMU is enabled, we store virtqueue metadata as iova (though it
may has _phys suffix) and access them through dma helpers. Any
translation failures could be reported by IOMMU.
In this case, trying to validate iova against gpa won't work and will
cause a false error reporting. So this patch bypasses the ring
verification if IOMMU is enabled which is similar to the behavior
before 0ca1fd2d68 that calls vhost_memory_map() which is a nop when
IOMMU is enabled.
Fixes: 0ca1fd2d68 ("vhost: Simplify ring verification checks")
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The CMSDK APB UART INTSTATUS register bits are all write-one-to-clear.
We were getting this correct for the TXO and RXO bits (which need
special casing because their state lives in the STATE register),
but had forgotten to handle the normal bits for RX and TX which
we do store in our s->intstatus field.
Perform the W1C operation on the bits in s->intstatus too.
Fixes: https://bugs.launchpad.net/qemu/+bug/1760262
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180410134203.17552-1-peter.maydell@linaro.org
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here's a rather late pull request with a handful of fixes for 2.12.
These have been blocked for some time, because I wasn't able to
complete my usual test set due to the SCSI problem fixed in 37c5174
"scsi-disk: Don't enlarge min_io_size to max_io_size".
Since we're in hard freeze, these are all bugfixes. Most are also
regressions, although in one case it's only a "regression" because a
longstanding bug has been exposed by a new machine type (sam460ex) in
the testcases. There are also a couple of sam460ex fixes that aren't
regressions since the board didn't exist before. On the flipside
though, they're low risk because they only touch board specific code
for a board that doesn't exist in any released version.
-----BEGIN PGP SIGNATURE-----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=VDFg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180410' into staging
ppc patch queue 2018-04-10
Here's a rather late pull request with a handful of fixes for 2.12.
These have been blocked for some time, because I wasn't able to
complete my usual test set due to the SCSI problem fixed in 37c5174
"scsi-disk: Don't enlarge min_io_size to max_io_size".
Since we're in hard freeze, these are all bugfixes. Most are also
regressions, although in one case it's only a "regression" because a
longstanding bug has been exposed by a new machine type (sam460ex) in
the testcases. There are also a couple of sam460ex fixes that aren't
regressions since the board didn't exist before. On the flipside
though, they're low risk because they only touch board specific code
for a board that doesn't exist in any released version.
# gpg: Signature made Tue 10 Apr 2018 08:13:52 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.12-20180410:
roms/u-boot-sam460ex: Change to qemu git mirror and update
sam460ex: Fix timer frequency and clock multipliers
tests/boot-serial: Test the sam460ex board
spapr: Initialize reserved areas list in FDT in H_CAS handler
target/ppc: Fix backwards migration of msr_mask
hw/misc/macio: Fix crash when listing device properties of macio device
target/ppc: Initialize lazy_tlb_flush correctly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASAN reported:
hw/block/pflash_cfi02.c:245:33: runtime error: index 82 out of bounds for type 'uint8_t [82]'
Since the 'cfi_len' member is not used, remove it to keep the code safer.
Cc: qemu-stable@nongnu.org
Reported-by: AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
* tcg: Fix guest state corruption when running 64-bit Arm
guests on a 32-bit host (especially when using icount)
* linux-user/signal.c: Ensure AArch64 signal frame isn't too small
* cpus.c: ensure running CPU recalculates icount deadlines on timer expiry
* target/arm: Report unsupported MPU region sizes more clearly
* hw/arm/fsl-imx: Fix introspection problem with fsl-imx6 and fsl-imx7
* hw/arm/allwinner-a10: Do not use nd_table in instance_init function
* hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
* hw/sd/bcm2835_sdhost: Add tracepoints
* target-arm: Check undefined opcodes for SWP in A32 decoder
* hw/arm/integratorcp: Don't do things that could be fatal in the instance_init
* hw/arm: Allow manually specified /psci node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJazKsMAAoJEDwlJe0UNgzevPsP/RIhj/CwydGiO1AlZmX5XwWt
pHUgG7bJCZEoxrAJWm3jZG6Um8RFjv90FLozKqc5l8uCHPTyKmgrcfvwO2xwDQcC
qTyGkRanRNGWqTkr0zu3iwZCM98WgTInQ3acjPikdgobsThJXZqcf6ujDl5hLQOe
sKfpGXuGujXqC6ibjWYXLqXWgv5kVT+cCC/qcW5fchtlbqm/PNqdxJnhnwD1IwxZ
f6oNwNQ62yDwTqXHAWsiVvop/eh1Je/2sY91ojqWEq42Gl/7veasEMr/V/dLcEZ9
gQQamTirc2Zo4UG9F8uaigPtxYfeHqMy6izDZDC25GsTAnjClU8WJNGEjpsInZRc
S4jahp8nhzeoYQ/sWfxq4KEoIsKxhP3H4O42Yp8vQUwwd6eRKItHOT7wdKyVNgkt
Be9/k8yeOye8nR6J362VveVnE26oY5dVHscaTh2GVjzFakRLDq8T8pbGWPjrLlP/
bffVbgeS3NvlYaHhPmL8oL3P+rKQGeMGX5MxtumqRgn/CorZBOiIaC/JggNFOPKp
8qalN9GkkJ8y6xFKLGTqmR1DHCwz3TM3romjtZKlFYpYHxpGO1t63jTTdmq3fBzW
RjTCVqd/jha48Dg6Vt2d7FIpTEJrbiwD2exKW0kyWfQf6j/A8PXDA6YAlvfcLc+S
/pDavxEz9jO+jlpwIx7x
=cxN4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180410' into staging
target-arm queue:
* fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
* tcg: Fix guest state corruption when running 64-bit Arm
guests on a 32-bit host (especially when using icount)
* linux-user/signal.c: Ensure AArch64 signal frame isn't too small
* cpus.c: ensure running CPU recalculates icount deadlines on timer expiry
* target/arm: Report unsupported MPU region sizes more clearly
* hw/arm/fsl-imx: Fix introspection problem with fsl-imx6 and fsl-imx7
* hw/arm/allwinner-a10: Do not use nd_table in instance_init function
* hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
* hw/sd/bcm2835_sdhost: Add tracepoints
* target-arm: Check undefined opcodes for SWP in A32 decoder
* hw/arm/integratorcp: Don't do things that could be fatal in the instance_init
* hw/arm: Allow manually specified /psci node
# gpg: Signature made Tue 10 Apr 2018 13:16:12 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180410:
fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
tcg: Introduce tcg_set_insn_start_param
linux-user/signal.c: Ensure AArch64 signal frame isn't too small
cpus.c: ensure running CPU recalculates icount deadlines on timer expiry
target/arm: Report unsupported MPU region sizes more clearly
hw/arm/fsl-imx: Fix introspection problem with fsl-imx6 and fsl-imx7
hw/arm/allwinner-a10: Do not use nd_table in instance_init function
hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
hw/sd/bcm2835_sdhost: Add tracepoints
target-arm: Check undefined opcodes for SWP in A32 decoder
hw/arm/integratorcp: Don't do things that could be fatal in the instance_init
hw/arm: Allow manually specified /psci node
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently exits unexpectedly when trying to introspect the fsl-imx6
and fsl-imx7 devices on systems with many SMP CPUs:
$ echo "{'execute':'qmp_capabilities'}"\
"{'execute':'device-list-properties',"\
" 'arguments':{'typename':'fsl,imx6'}}" \
| arm-softmmu/qemu-system-arm -M virt,accel=qtest -qmp stdio -smp 8
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
fsl,imx6: Only 4 CPUs are supported (8 requested)
And:
$ echo "{'execute':'qmp_capabilities'}"\
"{'execute':'device-list-properties',"\
" 'arguments':{'typename':'fsl,imx7'}}" \
| arm-softmmu/qemu-system-arm -M raspi2,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
fsl,imx7: Only 2 CPUs are supported (4 requested)
This happens because these devices are doing an exit() from their
instance_init function - which should never be done since instance_init
can be called at any time for device introspection! Fix it by moving
the deadly check into the realize() function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1522908551-14885-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The instance_init function of a device can be called at any time, even
if the device is not going to be used (i.e. not going to be realized).
So a instance_init function must not do things that could cause QEMU
to exit, like calling qemu_check_nic_model(&nd_table[0], ...) for example.
But this is what the instance_init function of the allwinner-a10 device
is currently doing - and this causes QEMU to quit unexpectedly when
you run the 'device-list-properties' QMP command for example:
$ echo "{'execute':'qmp_capabilities'}"\
"{'execute':'device-list-properties',"\
" 'arguments':{'typename':'allwinner-a10'}}" \
| arm-softmmu/qemu-system-arm -M mps2-an505,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
Unsupported NIC model: lan9118
... and QEMU quits after printing the last line (which should not happen
just because of running 'device-list-properties' here).
And with the cubieboard, this even causes QEMU to abort():
$ echo "{'execute':'qmp_capabilities'}"\
"{'execute':'device-list-properties',"\
" 'arguments':{'typename':'allwinner-a10'}}" \
| arm-softmmu/qemu-system-arm -M cubieboard,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
Unexpected error in error_set_from_qdev_prop_error() at hw/core/qdev-properties.c:1095:
Property 'allwinner-emac.netdev' can't take value 'hub0port0', it's in use
Aborted (core dumped)
To fix the problem we've got to move the offending code to the realize
function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1522862420-7484-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux bcm2835_sdhost driver doesn't work on QEMU, because our
model raises spurious data interrupts. Our function
bcm2835_sdhost_fifo_run() will flag an interrupt any time it is
called with s->datacnt == 0, even if the host hasn't actually issued
a data read or write command yet. This means that the driver gets a
spurious data interrupt as soon as it enables IRQs and then does
something else that causes us to call the fifo_run routine, like
writing to SDHCFG, and before it does the write to SDCMD to issue the
read. The driver's IRQ handler then spins forever complaining that
there's no data and the SD controller isn't in a state where there's
going to be any data:
[ 41.040738] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000
[ 41.042059] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000
(continues forever).
Move the interrupt flag setting to more plausible places:
* for BUSY, raise this as soon as a BUSYWAIT command has executed
* for DATA, raise this when the FIFO has any space free (for a write)
or any data in it (for a read)
* for BLOCK, raise this when the data count is 0 and we've
actually done some reading or writing
This is pure guesswork since the documentation for this hardware is
not public, but it is sufficient to get the Linux bcm2835_sdhost
driver to work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-3-peter.maydell@linaro.org
Add some tracepoints to the bcm2835_sdhost driver, to assist
debugging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-2-peter.maydell@linaro.org
Change the code to avoid exiting QEMU if user provided DTB contains
manually specified /psci node and skip any /psci related fixups
instead.
Fixes: 4cbca7d9b4 ("hw/arm: Move virt's PSCI DT fixup code to
arm/boot.c")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Message-id: 20180402205654.14572-1-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJazDEhAAoJEO8Ells5jWIRwNcH/jfvFCOg5SVefHiuk4+6b3mM
3YP9vBFGx0gJREelYBriCWuMUELem79rGWskQvhNe43/qkFktlR/bRbB+QOIcPmo
ZoDHNj8AQXTkCbXnctsG4ygPmAuK67zft9yNMRQlOH3OUnfFfEq+aNL9tXenzgrS
oLfVApdtBk67ZdwWOrEz+43YKB/0FyvFoHFdABvPLRFtWlKLtGMgoYLjGdjxywMK
LpHkKm+Uw0xW+Y4PII1yEN7ke3Nx9Gw8SWWegTPZlJ+hPMvtF8nt3uibD38YqsKg
XfuCWDSeJ8LIQNUdG4K5g5dIES2NaEIDeENatWlvELgP7HdlQSQ0HbJFoCUHmOk=
=fuVG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 10 Apr 2018 04:36:01 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
e1000: Old machine types, turn new subsection off
e1000: Choose which set of props to migrate
e1000: Migrate props via a temporary structure
e1000: wire new subsection to property
e1000: Dupe offload data on reading old stream
e1000: Convert v3 fields to subsection
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we're using the subsection we migrate both
the 'props' and 'tso_props' data; when we're not using
the subsection (to migrate to 2.11 or old machine types) we've
got to choose what to migrate in the main structure.
If we're using the subsection migrate 'props' in the main structure.
If we're not using the subsection then migrate the last one
that changed, which gives behaviour similar to the old behaviour.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Swing the tx.props out via a temporary structure, so in future patches
we can select what we're going to send.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Wire the new subsection from the previous commit to a property
so we can turn it off easily.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Old QEMUs only had one set of offload data; when we only receive
one lot, dupe the received data - that should give us about the
same bug level as the old version.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A bunch of new TSO fields were introduced by d62644b4 and this bumped
the VMState version; however it's easier for those trying to keep
backwards migration compatibility if these fields are added in a
subsection instead.
Move the new fields to a subsection.
Since this was added after 2.11, this change will only affect
compatbility with 2.12-rc0.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We only emulate timer running at CPU frequency which is what most
guests expect so set the frequency to match real hardware. This also
allows setting clock multipliers which caused slowdown previously due
to wrong timer frequency.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment the device tree produced by the H_CAS handler has no
reserved map initialized at all which is not correct as at least one
empty record is required to be present as a marker of the end.
This does not cause problems now as the only consumer is SLOF which
does not look at the reserved map area.
However when DTC's "Improve libfdt's memory safety" changeset hits
the QEMU upstream, there will be errors reported and crashes observed.
This fixes the problem by adding an empty entry to the reserved map,
just like create_device_tree() does already.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The macio-newworld device can currently be used to abort QEMU unexpectedly:
$ ppc-softmmu/qemu-system-ppc -S -M ref405ep,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{ 'execute': 'qmp_capabilities' }
{"return": {}}
{ 'execute': 'device-list-properties',
'arguments': {'typename': 'macio-newworld'}}
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:222:
Device 'serial0' is in use
Aborted (core dumped)
qdev properties should be set during realize(), not during instance_init(),
so move the related code there to fix this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Check device having the feature of VIRTIO_CONSOLE_F_EMERG_WRITE before
get config->emerg_wr. It is neccessary because sizeof(virtio_console_config)
is 8 byte if VirtIOSerial doesn't have the feature of
VIRTIO_CONSOLE_F_EMERG_WRITE(see virtio_serial_device_realize),
read/write emerg_wr will lead to heap-over-flow.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-Id: <20180328133435.20112-1-linzhecheng@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When migrating from a pre-2.9 QEMU, no clock_is_reliable flag is
transferred. We should assume that the source host has an unreliable
KVM_GET_CLOCK, rather than using whatever was determined locally, to
ensure that any drift from the TSC-based value calculated by the guest
is corrected.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Message-Id: <20180406053406.774-1-mike@very.puzzling.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU fails when used with the following command line:
./ppc64-softmmu/qemu-system-ppc64 -S -machine 40p -device i82374
qemu-system-ppc64: hw/isa/isa-bus.c:110: isa_bus_dma: Assertion `!bus->dma[0] && !bus->dma[1]' failed.
The 40p machine type already creates the device i82374. If specified in the
command line, it will try to create it again, hence generating the error. The
function isa_bus_dma() isn't supposed to be called twice for the same bus.
Check the bus doesn't already have a DMA controller registered before creating
the device.
Fixes: https://bugs.launchpad.net/qemu/+bug/1721224
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180326153441.32641-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU SCSI code makes assumptions about how the PROTECT and BYTCHK
works in the protocol, denying support for PI (Protection
Information) in case the guest OS requests it. However, in SCSI versions 2
and older, there is no PI concept in the protocol.
This means that when dealing with such devices:
- there is no PROTECT bit in byte 5 of the standard INQUIRY response. The
whole byte is marked as "Reserved";
- there is no RDPROTECT in byte 2 of READ. We have 'Logical Unit Number'
in this field instead;
- there is no VRPROTECT in byte 2 of VERIFY. We have 'Logical Unit Number'
in this field instead. This also means that the BYTCHK bit in this case
is not related to PI.
Since QEMU does not consider these changes, a SCSI passthrough using
a SCSI-2 device will not work. It will mistake these fields with
PI information and return Illegal Request SCSI SENSE thinking
that the driver is asking for PI support.
This patch fixes it by adding a new attribute called 'scsi_version'
that is read from the standard INQUIRY response of passthrough
devices. This allows for a version verification before applying
conditions related to PI that doesn't apply for older versions.
Reported-by: Dac Nguyen <dacng@us.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-Id: <20180327211451.14647-1-danielhb@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to have different behavior for passthrough devices
depending on the SCSI version they expose. To prepare for that,
allow the user of emulated devices to specify the desired SCSI
level, and adjust the emulation according to the property value.
The next patch will set the level for scsi-block and scsi-generic
devices.
Based on a patch by Daniel Henrique Barboza
<danielhb@linux.vnet.ibm.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some backends report big max_io_sectors. Making min_io_size the same
value in this case will make it impossible for guest to align memory,
therefore the disk may not be usable at all.
Do not enlarge them when they are zero.
Reported-by: David Gibson <dgibson@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180327164141.19075-1-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check device having the feature of VIRTIO_CONSOLE_F_EMERG_WRITE before
get config->emerg_wr. It is neccessary because sizeof(virtio_console_config)
is 8 byte if VirtIOSerial doesn't have the feature of
VIRTIO_CONSOLE_F_EMERG_WRITE(see virtio_serial_device_realize),
read/write emerg_wr will lead to heap-over-flow.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
My rework of section adding combines overlapping or adjoining regions,
but checks they're actually the same underlying RAM block.
Fix the case where two blocks adjoin but don't overlap; that new region
should get added (but not combined), but my previous patch was disallowing it.
Fixes: c1ece84e7c
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without a dedicated protocol feature, QEMU cannot know whether
the backend can handle VHOST_USER_SET_CONFIG and
VHOST_USER_GET_CONFIG messages.
This patch adds a protocol feature that is only advertised by
QEMU if the device implements the config ops. Vhost user init
fails if the device support the feature but the backend doesn't.
The backend should only send VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
requests if the protocol feature has been negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
As soon as vhost-user init is done, the backend may send
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG, so let's set the
notification callback before it.
Also, it will be used to know whether the device supports
the config feature to advertize it or not.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
If the subchannel is already attached or if vfio_get_device() fails, the
code jumps to the 'out_device_err' label and doesn't free the string it
has just allocated.
The code should be reworked so that vcdev->vdev.name only gets set when
the device has been attached, and freed when it is about to be detached.
This could be achieved with the addition of a vfio_ccw_get_device()
function that would be the counterpart of vfio_put_device(). But this is
a more elaborate cleanup that should be done in a follow-up. For now,
let's just add calls to g_free() on the buggy error paths.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152311222681.203086.8874800175539040298.stgit@bahia>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Operating systems may request an IPL from a virtio-scsi device
by specifying an IPL parameter type of CCW. In this case QEMU
won't set up the IPLB correctly. The BIOS will still detect
it's a SCSI device to boot from, but it will now have to search
for the first LUN and attempt to boot from there.
However this may not be the original boot LUN if there's more than
one SCSI disk attached to the HBA.
With this change QEMU will detect that the request is for a
SCSI device and will rebuild the initial IPL parameter info
if it's the SCSI device used for the first boot. In consequence
the BIOS can use the boot LUN from the IPL information block.
In case a different SCSI device has been set, the BIOS will find
and use the first available LUN.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-3-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Splitting out the the CCW device extraction allows reuse.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit 567b5b309a ("vfio/pci: Relax DMA map errors for MMIO regions")
added an error message if a passed memory section address or size
is not aligned to the page size and thus cannot be DMA mapped.
This patch fixes the trace by printing the region name and the
memory region section offset within the address space (instead of
offset_within_region).
We also turn the error_report into a trace event. Indeed, In some
cases, the traces can be confusing to non expert end-users and
let think the use case does not work (whereas it works as before).
This is the case where a BAR is successively mapped at different
GPAs and its sections are not compatible with dma map. The listener
is called several times and traces are issued for each intermediate
mapping. The end-user cannot easily match those GPAs against the
final GPA output by lscpi. So let's keep those information to
informed users. In mid term, the plan is to advise the user about
BAR relocation relevance.
Fixes: 567b5b309a ("vfio/pci: Relax DMA map errors for MMIO regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The string returned by object_property_get_str() is dynamically allocated.
Fixes: 3c4e9baacf
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152231460685.69730.14860451936216690693.stgit@bahia.lan>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Section 5.5.3.2.2 of the CRB specs states that use of the TPM
through the localty control method must first be requested,
otherwise the command will be dropped.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reset the Granted flag when relinquishing a locality.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit ef0e64a983 "ide: pass IDEState to trim AIO callback" changed the
IDE trim callback from using a BlockBackend to an IDEState but forgot to update
the dma_blk_io() call in hw/ide/macio.c accordingly.
Without this fix qemu-system-ppc segfaults when issuing an IDE trim command on
any of the PPC Mac machines (easily triggered by running the Debian installer).
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20180223184700.28854-1-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
commit 947858b0 "ide: abort TRIM operation for invalid range"
is incorrect for macio; just ide_dma_error() without doing a callback
is not enough for that errorpath.
Instead, pass -EINVAL to the callback and handle it there
(see related motivation for read/write in 58ac32113).
It will however catch possible EINVAL from the block layer too.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1520010495-58172-1-git-send-email-anton.nefedov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Thomas.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJauOmSAAoJEL/70l94x66DwA4IAIfXUyWSDzAMTc19N/gY4eKB
cptfJas1CmfrMU+EBIVZoiVdYF1H5qvctxVSaCXL3y7XNfwrjfDoiplfbi9rTSKb
pW59bqIf7Y+ViOYDYHdbxKMcvWxIaiWKfpzWkncy+aeqObs620VSCbVmqVsQsKQu
1OHWrTlgNAP4aqPy9gZ6O1YXBDxTCIKW9N+QIdho5RqB1uPFkjBJcxlF04ydF9S7
kIgblBsosljTOk03I2hf6KKtfXfRXctgE/RYyE8SW3dy+CQWfiGjkE/z17ABBjK2
g7Rex6S9NA/+fDXO+2MAYnx6iBA9Dkxt2CcWWDjGwg+nXS4+B/OoF4MhRwV6N2g=
=5hGp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Miscellaenous bugfixes, including crash fixes from Alexey, Peter M. and
Thomas.
# gpg: Signature made Mon 26 Mar 2018 13:37:38 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
qemu-pr-helper: Actually allow users to specify pidfile
chardev/char-fe: Allow NULL chardev in qemu_chr_fe_init()
iothread: fix breakage on windows
scsi: turn "is this a SCSI device?" into a conditional hint
chardev-socket: remove useless if
tcg: Really fix cpu_io_recompile
vhost-user-test: add back memfd check
vhost-user-test: do not hang if chardev creation failed
scripts/device-crash-test: Remove fixed isapc-with-iommu entry
hw/audio: Fix crashes when devices are used on ISA bus without DMA
fdc: Exit if ISA controller does not support DMA
hw/net/can: Fix segfaults when using the devices without bus
WHPX improve vcpu_post_run perf
WHPX fix WHvSetPartitionProperty in PropertyCode
WHPX fix WHvGetCapability out WrittenSizeInBytes
scripts/get_maintainer.pl: Print proper error message for missing $file
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the user does not have permissions to send ioctls to the device (due to
SELinux or cgroups, for example), the output can look like
qemu-kvm: -device scsi-block,drive=disk: cannot get SG_IO version number:
Operation not permitted. Is this a SCSI device?
but this is confusing because the ioctl was blocked _before_ the device
even received the SG_GET_VERSION_NUM ioctl. Therefore, for EPERM errors
the suggestion should be eliminated. To make that simpler, change the
code to use error_append_hint.
Reported-by: Ala Hino <ahino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cs4231a, gus and sb16 sound cards crash QEMU when the user tries
to instantiate them on a machine with DMA-less ISA bus (for example
with "qemu-system-mips64el -M mips -device sb16"). Add proper checks
to the realize functions to avoid the crashes.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A "powernv" machine type defines an ISA bus but it does not add any DMA
controller to it so it is possible to hit assert(fdctrl->dma) by
adding "-machine powernv -device isa-fdc".
This replaces assert() with an error message.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[thuth: Slightly adjusted error message and updated scripts/device-crash-test]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CAN devices can currently be used to crash QEMU, e.g.:
$ x86_64-softmmu/qemu-system-x86_64 -device kvaser_pci
Segmentation fault (core dumped)
So we've got to add a proper check here that the corresponding
bus is available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-2-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the backend could not transmit a packet right away for some reason,
the packet is queued for asynchronous sending. The corresponding vq
element is tracked in the async_tx.elem field of the VirtIONetQueue,
for later freeing when the transmission is complete.
If a reset happens before completion, virtio_net_tx_complete() will push
async_tx.elem back to the guest anyway, and we end up with the inuse flag
of the vq being equal to -1. The next call to virtqueue_pop() is then
likely to fail with "Virtqueue size exceeded".
This can be reproduced easily by starting a guest with an hubport backend
that is not connected to a functional network, eg,
-device virtio-net-pci,netdev=hub0 -netdev hubport,id=hub0,hubid=0
and no other -netdev hubport,hubid=0 on the command line.
The appropriate fix is to ensure that such an asynchronous transmission
cannot survive a device reset. So for all queues, we first try to send
the packet again, and eventually we purge it if the backend still could
not deliver it.
CC: qemu-stable@nongnu.org
Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://github.com/open-power-host-os/qemu/issues/37
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* arm/translate-a64: don't lose interrupts after unmasking via write to DAIF
* sdhci: fix incorrect use of Error *
* hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses
* hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15
* i.MX: Support serial RS-232 break properly
* mach-virt: Set VM's SMBIOS system version to mc->name
* target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK
* target/arm: Factor out code to calculate FSR for debug exceptions
* target/arm: Set FSR for BKPT, BRK when raising exception
* target/arm: Always set FAR to a known unknown value for debug exceptions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eH28
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180323' into staging
target-arm queue:
* arm/translate-a64: don't lose interrupts after unmasking via write to DAIF
* sdhci: fix incorrect use of Error *
* hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses
* hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15
* i.MX: Support serial RS-232 break properly
* mach-virt: Set VM's SMBIOS system version to mc->name
* target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK
* target/arm: Factor out code to calculate FSR for debug exceptions
* target/arm: Set FSR for BKPT, BRK when raising exception
* target/arm: Always set FAR to a known unknown value for debug exceptions
# gpg: Signature made Fri 23 Mar 2018 18:48:57 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180323:
target/arm: Always set FAR to a known unknown value for debug exceptions
target/arm: Set FSR for BKPT, BRK when raising exception
target/arm: Factor out code to calculate FSR for debug exceptions
target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK
mach-virt: Set VM's SMBIOS system version to mc->name
i.MX: Support serial RS-232 break properly
hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15
hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses
sdhci: fix incorrect use of Error *
arm/translate-a64: treat DISAS_UPDATE as variant of DISAS_EXIT
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of using "1.0" as the system version of SMBIOS, we should use
mc->name for mach-virt machine type to be consistent other architectures.
With this patch, "dmidecode -t 1" (e.g., "-M virt-2.12,accel=kvm") will
show:
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: QEMU
Product Name: KVM Virtual Machine
Version: virt-2.12
Serial Number: Not Specified
...
instead of:
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: QEMU
Product Name: KVM Virtual Machine
Version: 1.0
Serial Number: Not Specified
...
For backward compatibility, we allow older machine types to keep "1.0"
as the default system version.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20180322212318.7182-1-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux does not detect a break from this IMX serial driver as a magic
sysrq. Nor does it note a break in the port error counts.
The former is because the Linux driver uses the BRCD bit in the USR2
register to trigger the RS-232 break handler in the kernel, which is
where sysrq hooks in. The emulated UART was not setting this status
bit.
The latter is because the Linux driver expects, in addition to the BRK
bit, that the ERR bit is set when a break is read in the FIFO. A break
should also count as a frame error, so add that bit too.
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Message-id: 20180320013657.25038-1-tpiepho@impinj.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the GIC has the security extension support enabled, then a
non-secure access to ICC_PMR must take account of the non-secure
view of interrupt priorities, where real priorities 0x00..0x7f
are secure-only and not visible to the non-secure guest, and
priorities 0x80..0xff are shown to the guest as if they were
0x00..0xff. We had the logic here wrong:
* on reads, the priority is in the secure range if bit 7
is clear, not if it is set
* on writes, we want to set bit 7, not mask everything else
Our ICC_RPR read code had the same error as ICC_PMR.
(Compare the GICv3 spec pseudocode functions ICC_RPR_EL1
and ICC_PMR_EL1.)
Fixes: https://bugs.launchpad.net/qemu/+bug/1748434
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20180315133441.24149-1-peter.maydell@linaro.org
Detected by Coverity (CID 1386072, 1386073, 1386076, 1386077). local_err
was unused, and this made the static analyzer unhappy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20180320151355.25854-1-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the correct printf formats, so that a 32-bit compile doesn't spit
out lots of warnings about %lx being incompatible with uint64_t.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180322095220.9976-4-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Macro should not cast the given variable to u64 instead it should use
the supplied format argument (fmt).
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180322095220.9976-3-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
To avoid compilation warnings on 32-bit machines:
rdma_backend.c: In function 'rdma_backend_create_mr':
rdma_backend.c:409:37: error: cast to pointer from integer of different
size [-Werror=int-to-pointer-cast]
mr->ibmr = ibv_reg_mr(pd->ibpd, (void *)addr, length, access);
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180322095220.9976-2-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Fix some enum castings and extra parentheses.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20180321140316.96045-1-marcel@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Our rule right now is to use <> for external headers only.
RDMA code violates that, fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
This IB verb is needed by some applications - implement it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Currently we don't support pci multifunction. If a pci with
multifucntion is plugged, the guest will spin forever. This patch fixes
this.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
I couldn't find a case where this prevents something bad from happening
that isn't already caught by other checks, but let's err on the safe
side and check that mh_header_addr is as expected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jack Schwartz <jack.schwartz@oracle.com>
The code path where mh_load_end_addr is non-zero in the Multiboot
header checks that mh_load_end_addr >= mh_load_addr and so
mb_load_size is checked. However, mb_load_size is not checked when
calculated from the file size, when mh_load_end_addr is 0.
If the kernel binary size is larger than can fit in the address space
after load_addr, we ended up with a kernel_size that is smaller than
load_size, which means that we read the file into a too small buffer.
Add a check to reject kernel files with such Multiboot headers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jack Schwartz <jack.schwartz@oracle.com>
