The pc-i440fx-2.1 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-9-philmd@linaro.org>
PCMachineClass::legacy_acpi_table_size was only used by the
pc-i440fx-2.0 machine, which got removed. Remove it and simplify
acpi_build().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240617071118.60464-6-philmd@linaro.org>
The pc-i440fx-2.0 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-3-philmd@linaro.org>
AST2700 dram size calculation is not back compatible AST2600.
According to the DDR capacity hardware behavior,
if users write the data to the address which is beyond the ram size,
it would write the data to the "address % ram_size".
For example:
a. sdram base address "0x4 00000000"
b. sdram size 1 GiB
The available address range is from "0x4 00000000" to "0x4 3FFFFFFF".
If users write 0x12345678 to address "0x5 00000000",
the value of DRAM address 0 (base address 0x4 00000000) will be 0x12345678.
Add aspeed_soc_ast2700_dram_init to calculate the dram size and add
memory I/O whose address range is from "max_ram_size - ram_size" to max_ram_size
and its read/write handler to emulate DDR capacity hardware behavior.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU).
AST2700 SOC and its interrupt controller are too complex to handle
in the common Aspeed SoC framework. We introduce a new ast2700
class with instance_init and realize handlers.
AST2700 is a 64 bits quad core cpus and support 8 watchdog.
Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8.
In addition, update AspeedSocState to support scuio, sli, sliio and intc.
Add TYPE_ASPEED27X0_SOC machine type.
The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting
start from u-boot stage. Set SDMC controller
unlocked by default.
In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts.
It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136.
And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to
GICINT or-gates instead of GIC device.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.
Introduce a new aspeed_intc class with instance_init and realize handlers.
So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.
If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).
Block diagram of GICINT132:
GICINT132
ETH1 +-----------+
+-------->+0 3|
ETH2 | 4|
+-------->+1 5|
ETH3 | 6|
+-------->+2 19| INTC GIC
UART0 | 20| +--------------------------+
+-------->+7 21| | | +--------------+
UART1 | 22| |orgate0 +----> output_pin0+----------->+GIC128 |
+-------->+8 23| | | | |
UART2 | 24| |orgate1 +----> output_pin1+----------->+GIC129 |
+-------->+9 25| | | | |
UART3 | 26| |orgate2 +----> output_pin2+----------->+GIC130 |
+--------->10 27| | | | |
UART5 | 28| |orgate3 +----> output_pin3+----------->+GIC131 |
+-------->+11 29| | | | |
UART6 | +----------->+orgate4 +----> output_pin4+----------->+GIC132 |
+-------->+12 30| | | | |
UART7 | 31| |orgate5 +----> output_pin5+----------->+GIC133 |
+-------->+13 | | | | |
UART8 | OR[0:31] | |orgate6 +----> output_pin6+----------->+GIC134 |
---------->14 | | | | |
UART9 | | |orgate7 +----> output_pin7+----------->+GIC135 |
--------->+15 | | | | |
UART10 | | |orgate8 +----> output_pin8+----------->+GIC136 |
--------->+16 | | | +--------------+
UART11 | | +--------------------------+
+-------->+17 |
UART12 | |
+--------->18 |
| |
| |
| |
+-----------+
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]
AST2700 have two SCU controllers which are SCU and SCUIO.
Both SCU and SCUIO registers are not compatible previous SOCs
, introduces new registers and adds ast2700 scu, sucio class init handler.
The pclk divider selection of SCUIO is defined in SCUIO280[20:18] and
the pclk divider selection of SCU is defined in SCU280[25:23].
Both of them are not compatible AST2600 SOCs, adds a get_apb_freq function
and trace-event for AST2700 SCU and SCUIO.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[clg: Fixed spelling : Unhandeled -> Unhandled ]
It set "aspeed_smc_flash_ops" struct which containing
read and write callbacks to be used when I/O is performed
on the SMC flash region. And it set the valid max_access_size 4
by default for all ASPEED SMC models.
However, the valid max_access_size 4 only support 32 bits CPUs.
To support all ASPEED SMC model, introduce a new
"const MemoryRegionOps *" attribute in AspeedSMCClass and
use it in aspeed_smc_flash_realize function.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
DMA length is from 1 byte to 32MB for AST2600 and AST10x0
and DMA length is from 4 bytes to 32MB for AST2500.
In other words, if "R_DMA_LEN" is 0, it should move at least 1 byte
data for AST2600 and AST10x0 and 4 bytes data for AST2500.
To support all ASPEED SOCs, adds dma_start_length parameter to store
the start length, add helper routines function to compute the dma length
and update DMA_LENGTH mask to "1FFFFFF" to support dma 1 byte
length unit for AST2600 and AST1030.
Currently, only supports dma length 4 bytes aligned.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The SDRAM memory controller(DRAMC) controls the access to external
DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.
The DRAM memory controller of AST2700 is not backward compatible
to previous chips such AST2600, AST2500 and AST2400.
Max memory is now 8GiB on the AST2700. Introduce new
aspeed_2700_sdmc and class with read/write operation and
reset handlers.
Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.
Add unlocked property to change controller protected status.
Incrementing the version of vmstate to 2.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.
Introduce dummy AST2700 SLI and SLIIO models.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 wdt controller is similiar to AST2600's wdt, but
the AST2700 has 8 watchdogs, and they each have 0x80 of registers.
Introduce ast2700 object class and increase the number of regs(offset) of
ast2700 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The Aspeed SMC device model use to have a 'sdram_base' property. It
was removed by commit d177892d4a ("aspeed/smc: Remove unused
"sdram-base" property") because previous changes simplified the DMA
transaction model to use an offset in RAM and not the physical
address.
The AST2700 SoC has larger address space (64-bit) and a new register
DMA DRAM Side Address High Part (0x7C) is introduced to deal with the
high bits of the DMA address. To be able to compute the offset of the
DMA transaction, as done on the other SoCs, we will need to know where
the DRAM is mapped in the address space. Re-introduce a "dram-base"
property to hold this value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add a second mapcache for grant mappings. The mapcache for
grants needs to work with XC_PAGE_SIZE granularity since
we can't map larger ranges than what has been granted to us.
Like with foreign mappings (xen_memory), machines using grants
are expected to initialize the xen_grants MR and map it
into their address-map accordingly.
CC: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In SNP, the hashes page designated with a specific metadata entry
published in AmdSev OVMF.
Therefore, if the user enabled kernel hashes (for measured direct boot),
QEMU should prepare the content of hashes table, and during the
processing of the metadata entry it copy the content into the designated
page and encrypt it.
Note that in SNP (unlike SEV and SEV-ES) the measurements is done in
whole 4KB pages. Therefore QEMU zeros the whole page that includes the
hashes table, and fills in the kernel hashes area in that page, and then
encrypts the whole page. The rest of the page is reserved for SEV
launch secrets which are not usable anyway on SNP.
If the user disabled kernel hashes, QEMU pre-validates the kernel hashes
page as a zero page.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-24-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As with SEV, an SNP guest requires that the BIOS be part of the initial
encrypted/measured guest payload. Extend sev_encrypt_flash() to handle
the SNP case and plumb through the GPA of the BIOS location since this
is needed for SNP.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-25-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent version of OVMF expanded the reset vector GUID list to add
SEV-specific metadata GUID. The SEV metadata describes the reserved
memory regions such as the secrets and CPUID page used during the SEV-SNP
guest launch.
The pc_system_get_ovmf_sev_metadata_ptr() is used to retieve the SEV
metadata pointer from the OVMF GUID list.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-19-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ask the ConfidentialGuestSupport object whether to use guest_memfd
for KVM-backend private memory. This bool can be set in instance_init
(or user_complete) so that it is available when the machine is created.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Align the framebuffer backend with the other legacy ones,
register it via xen_backend_init() when '-vga xenfb' is
used. It is safe because MODULE_INIT_XEN_BACKEND is called
in xen_bus_realize(), long after CLI processing initialized
the vga_interface_type variable.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-8-philmd@linaro.org>
Keep XenDevOps structures in .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-5-philmd@linaro.org>
XenDevOps @ops is not updated, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-4-philmd@linaro.org>
XenDevOps @ops is not updated, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-3-philmd@linaro.org>
Aside from the round robin threads this is all common code. By
moving the halt_cond setup we also no longer need hacks to work around
the race between QOM object creation and thread creation.
It is a little ugly to free stuff up for the round robin thread but
better it deal with its own specialises than making the other
accelerators jump through hoops.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-3-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Make the relationship between CPUState, ArchCPU and cpu_env a bit
clearer in the kdoc comments.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-2-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The TCGCPUOps::cpu_exec_halt method is called from cpu_handle_halt()
when the CPU is halted, so that a target CPU emulation can do
anything target-specific it needs to do. (At the moment we only use
this on i386.)
The current specification of the method doesn't allow the target
specific code to do something different if the CPU is about to come
out of the halt state, because cpu_handle_halt() only determines this
after the method has returned. (If the method called cpu_has_work()
itself this would introduce a potential race if an interrupt arrived
between the target's method implementation checking and
cpu_handle_halt() repeating the check.)
Change the definition of the method so that it returns a bool to
tell cpu_handle_halt() whether to stay in halt or not.
We will want this for the Arm target, where FEAT_WFxT wants to do
some work only for the case where the CPU is in halt but about to
leave it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-2-peter.maydell@linaro.org
It's not used anywhere, so let's simply remove it.
Message-ID: <20240527121351.211266-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
=lp7q
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* hw/i386/pc_sysfw: Alias rather than copy isa-bios region
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
# DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
# 7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
# lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
# g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
# t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
# =lp7q
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 May 2024 10:58:40 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
target-i386: hyper-v: Correct kvm_hv_handle_exit return value
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[4]
i386: Add cache topology info in CPUCacheInfo
hw/i386/pc: Support smp.modules for x86 PC machine
tests: Add test case of APIC ID for module level parsing
i386/cpu: Introduce module-id to X86CPU
i386: Support module_id in X86CPUTopoIDs
i386: Expose module level in CPUID[0x1F]
i386: Support modules_per_die in X86CPUTopoInfo
i386: Introduce module level cpu topology to CPUX86State
i386/cpu: Decouple CPUID[0x1F] subleaf with specific topology level
i386: Split topology types of CPUID[0x1F] from the definitions of CPUID[0xB]
i386/cpu: Introduce bitmap to cache available CPU topology levels
i386/cpu: Consolidate the use of topo_info in cpu_x86_cpuid()
i386/cpu: Use APIC ID info get NumSharingCache for CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use APIC ID info to encode cache topo in CPUID[4]
i386/cpu: Fix i/d-cache topology to core level for Intel CPU
target/i386: add control bits support for LAM
target/i386: add support for LAM in CPUID enumeration
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Li Zhijian's COLO minor fixes
- Marc-André's virtio-gpu fix
- Fiona's virtio-net USO fix
- A couple of migration-test fixes from Thomas
-----BEGIN PGP SIGNATURE-----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=DDrh
-----END PGP SIGNATURE-----
Merge tag 'migration-20240522-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Li Zhijian's COLO minor fixes
- Marc-André's virtio-gpu fix
- Fiona's virtio-net USO fix
- A couple of migration-test fixes from Thomas
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmZObggQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxnWE8D/49RGE+g29qyk9aKx3lU8mSq+ZzmX5GncBt
# 5+Mx5qoHDsBCQTE+dQpEVIoeMJ2HIbgbOML4qsnp6Hw/4/TWkfwC/R6+ZmHBevRk
# fVLkVh2JMHVg8Tq+0FO1X1QnMU03uJ7EAuWdDa8HqlJ5dQY/K3gDaku8oQBXk96X
# 13pChSbMob76tdb+wiwbdEakabigH7XfrPdI6lzI8MCGTIcPKc/UKTFYuoj/OsNx
# raqy+uBtvKtfHxiaYnIgHIPNAF/1f4tP3iAOcPoZWIMXWxFkE8+ANDJAbWo6xIcL
# DGg/wEzZO/OnXLjOhjvLBUHK/fx4wQ5bsqA09BVxoRyBGblkXr+bcwBLYjgiEqzT
# aniPiAx5W/Db+T7HqZPIWesFYj3cmcwvYUTrx/RPMdC0epG+ZczDMtescHdZbxvt
# Pjs3nFeCLhyYcVhlTI72eXRCxdd/26+r6/OmrBC2+GaZrybM61TvNo+3XvO0Pfhi
# UmwF2EN27XmSMelLvH/MnflUVgBHKDs3CCQzDlxreHq2jMVR0SL7LU5wMJJ58Iok
# M3u74izQM25bwYxiASH+4iRn0puH1mOwgOx28W0uiQfZY/678/lCnwa1Tul15BRE
# fIQZJhyIGzhSpwLqEXmdXdlLQs1isqIgpd/mzKgZ285nLr7kz+4gxCUqiXgVbrl7
# P45Dym1u4g==
# =DDrh
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 May 2024 03:13:28 PM PDT
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20240522-pull-request' of https://gitlab.com/farosas/qemu:
tests/qtest/migration-test: Fix the check for a successful run of analyze-migration.py
tests/qtest/migration-test: Run some basic tests on s390x and ppc64 with TCG, too
hw/core/machine: move compatibility flags for VirtIO-net USO to machine 8.1
virtio-gpu: fix v2 migration
migration: fix a typo
migration: add "exists" info to load-state-field trace
migration/colo: Tidy up bql_unlock() around bdrv_activate_all()
migration/colo: make colo_incoming_co() return void
migration/colo: Minor fix for colo error message
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit dfcf74fa ("virtio-gpu: fix scanout migration post-load") broke
forward/backward version migration. Versioning of nested VMSD structures
is not straightforward, as the wire format doesn't have nested
structures versions. Introduce x-scanout-vmstate-version and a field
test to save/load appropriately according to the machine version.
Fixes: dfcf74fa ("virtio-gpu: fix scanout migration post-load")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
[fixed long lines]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add module_id member in X86CPUTopoIDs.
module_id can be parsed from APIC ID, so also update APIC ID parsing
rule to support module level. With this support, the conversions with
module level between X86CPUTopoIDs, X86CPUTopoInfo and APIC ID are
completed.
module_id can be also generated from cpu topology, and before i386
supports "modules" in smp, the default "modules per die" (modules *
clusters) is only 1, thus the module_id generated in this way is 0,
so that it will not conflict with the module_id generated by APIC ID.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-16-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux kernel (from v6.4, with commit edc0a2b595765 ("x86/topology: Fix
erroneous smp_num_siblings on Intel Hybrid platforms") is able to
handle platforms with Module level enumerated via CPUID.1F.
Expose the module level in CPUID[0x1F] if the machine has more than 1
modules.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-15-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support module level in i386 cpu topology structure "X86CPUTopoInfo".
Since x86 does not yet support the "modules" parameter in "-smp",
X86CPUTopoInfo.modules_per_die is currently always 1.
Therefore, the module level width in APIC ID, which can be calculated by
"apicid_bitwidth_for_count(topo_info->modules_per_die)", is always 0 for
now, so we can directly add APIC ID related helpers to support module
level parsing.
In addition, update topology structure in test-x86-topo.c.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-14-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, QEMU checks the specify number of topology domains to detect
if there's extended topology levels (e.g., checking nr_dies).
With this bitmap, the extended CPU topology (the levels other than SMT,
core and package) could be easier to detect without touching the
topology details.
This is also in preparation for the follow-up to decouple CPUID[0x1F]
subleaf with specific topology level.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20240424154929.1487382-10-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the -bios case the "isa-bios" memory region is an alias to the BIOS mapped
to the top of the 4G memory boundary. Do the same in the -pflash case, but only
for new machine versions for migration compatibility. This establishes common
behavior and makes pflash commands work in the "isa-bios" region which some
real-world legacy bioses rely on.
Note that in the sev_enabled() case, the "isa-bios" memory region in the -pflash
case will now also point to encrypted memory, just like it already does in the
-bios case.
When running `info mtree` before and after this commit with
`qemu-system-x86_64 -S -drive \
if=pflash,format=raw,readonly=on,file=/usr/share/qemu/bios-256k.bin` and running
`diff -u before.mtree after.mtree` results in the following changes in the
memory tree:
--- before.mtree
+++ after.mtree
@@ -71,7 +71,7 @@
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
@@ -108,7 +108,7 @@
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
@@ -131,11 +131,14 @@
memory-region: pc.ram
0000000000000000-0000000007ffffff (prio 0, ram): pc.ram
+memory-region: system.flash0
+ 00000000fffc0000-00000000ffffffff (prio 0, romd): system.flash0
+
memory-region: pci
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
memory-region: smram
00000000000a0000-00000000000bffff (prio 0, ram): alias smram-low @pc.ram 00000000000a0000-00000000000bffff
Note that in both cases the "system" memory region contains the entry
00000000fffc0000-00000000ffffffff (prio 0, romd): system.flash0
but the "system.flash0" memory region only appears standalone when "isa-bios" is
an alias.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240508175507.22270-7-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Make VFIOIOMMUClass::add_window() and its wrapper function
vfio_container_add_section_window() return bool.
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Make VFIOIOMMUClass::attach_device() and its wrapper function
vfio_attach_device() return bool.
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Emit VFIO migration QAPI event when a VFIO device changes its migration
state. This can be used by management applications to get updates on the
current state of the VFIO device for their own purposes.
A new per VFIO device capability, "migration-events", is added so events
can be enabled only for the required devices. It is disabled by default.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Let the callers do the error reporting. Add documentation while at it.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Use vmstate_save_state_with_err() to improve error reporting in the
callers and store a reported error under the migration stream. Add
documentation while at it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We will use the Error object to improve error reporting in the
.log_global*() handlers of VFIO. Add documentation while at it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This commit introduces utility functions for the creation and deallocation
of QemuDmaBuf instances. Additionally, it updates all relevant sections
of the codebase to utilize these new utility functions.
v7: remove prefix, "dpy_gl_" from all helpers
qemu_dmabuf_free() returns without doing anything if input is null
(Daniel P. Berrangé <berrange@redhat.com>)
call G_DEFINE_AUTOPTR_CLEANUP_FUNC for qemu_dmabuf_free()
(Daniel P. Berrangé <berrange@redhat.com>)
v8: Introduction of helpers was removed as those were already added
by the previous commit
v9: set dmabuf->allow_fences to 'true' when dmabuf is created in
virtio_gpu_create_dmabuf()/virtio-gpu-udmabuf.c
removed unnecessary spaces were accidently added in the patch,
'ui/console: Use qemu_dmabuf_new() a...'
v11: Calling qemu_dmabuf_close was removed as closing dmabuf->fd will be
done in qemu_dmabuf_free anyway.
(Daniel P. Berrangé <berrange@redhat.com>)
v12: --- Calling qemu_dmabuf_close separately as qemu_dmabuf_free doesn't
do it.
--- 'dmabuf' is now allocated space so it should be freed at the end of
dbus_scanout_texture
v13: --- Immediately free dmabuf after it is released to prevent possible
leaking of the ptr
(Marc-André Lureau <marcandre.lureau@redhat.com>)
--- Use g_autoptr macro to define *dmabuf for auto clean up instead of
calling qemu_dmabuf_free
(Marc-André Lureau <marcandre.lureau@redhat.com>)
v14: --- (vhost-user-gpu) Change qemu_dmabuf_free back to g_clear_pointer
as it was done because of some misunderstanding (v13).
--- (vhost-user-gpu) g->dmabuf[m->scanout_id] needs to be set to NULL
to prevent freed dmabuf to be accessed again in case if(fd==-1)break;
happens (before new dmabuf is allocated). Otherwise, it would cause
invalid memory access when the same function is executed. Also NULL
check should be done before qemu_dmabuf_close (it asserts dmabuf!=NULL.).
(Marc-André Lureau <marcandre.lureau@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-6-dongwon.kim@intel.com>
The rtc-reset-reinjection QMP command is specific to x86, other boards do not
have the ACK tracking functionality that is needed for RTC interrupt
reinjection. Therefore the QMP command is only included in x86, but
qmp_rtc_reset_reinjection() is implemented by hw/rtc/mc146818rtc.c
and requires tracking of all created RTC devices. Move the implementation
to hw/i386, so that 1) it is available even if no RTC device exist
2) the only RTC that exists is easily found in x86ms->rtc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep the basic X86MachineState definition in x86.c. Move out functions that
are only needed by other files: x86-common.c for the pc and microvm machines,
x86-cpu.c for those used by accelerator code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
