This change defines accessors for VSR doubleword and word fields that
are correct from a host Endian perspective. This allows code to
use the Power ISA indexing numbers in code.
For example, the xscvdpsxws instruction has a target VSR that looks
like this:
0 32 64 127
+-----------+--------+-----------+-----------+
| undefined | SW | undefined | undefined |
+-----------+--------+-----------+-----------+
VSX helper code will use VsrW(1) to access this field.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The various VSX Convert to Integer instructions should truncate the
floating point number to an integer value, which is equivalent to
a round-to-zero rounding mode. The existing VSX floating point to
integer conversion helpers are erroneously using the rounding mode set
int the PowerPC Floating Point Status and Control Register (FPSCR).
This change corrects this defect by using the appropriate
float*_to_*_round_to_zero() routines fro the softfloat library.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This change adds the float32_to_uint64_round_to_zero function to the softfloat
library. This function fills out the complement of float32 to INT round-to-zero
conversion rountines, where INT is {int32_t, uint32_t, int64_t, uint64_t}.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
The change log is:
> Isolate sc 1 detection logic
> build: auto-detect ppc64 architecture
> cas: increase hcall buffer size to accomodate 256 cpus
> usb: change device tree naming
> usb-core: adjust port numbers in set_address
> virtio-scsi: correct srplun comment
> Fix kernel loading
> Workaround to make grub2 assign server ip from dhcp ack packet only
> ELF: Enter LE binary in LE mode
> ELF loading should fail for virt != phys
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
We now reset SPRs to their reset values on CPU reset. So if we want
to have an SPR persistently changed, we need to change its default
reset value rather than the value itself manually.
Do this for SPR_BOOKE_PIR, fixing e500v2 SMP boot.
Reported-by: Frederic Konrad <fred.konrad@greensocs.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: KONRAD Frederic <fred.konrad@greensocs.com>
Only i386, x86_64, sparc and sparc64 qtests were cleaned up.
Make this more generic to not miss any newly tested targets.
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When installing modules (when --enable-modules is specified for
./configure), Makefile uses the following construct to replace all
slashes with dashes in module name:
${s//\//-}
This is a bash-specific substitution mechanism. POSIX does not
have it, and some operating systems (for example Debian) does not
implement this construct in default shell (for example dash).
Use more traditional way to perform the substitution: use `tr' tool.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1396707946-21351-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The commit 88c1ee73d3
char/serial: Fix emptyness check
Still causes extra NULL byte(s) to be sent.
So if the fifo is empty, do not send an extra NULL byte.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Message-id: 1395160174-16006-1-git-send-email-dslutz@verizon.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Amazon eating Anthonys time status "Maintained" certainly isn't
true any more. Update entry accordingly.
Also add myself, so scripts/get_maintainer.pl will Cc: me, to reduce
the chance ui patches fall through the cracks on our pretty loaded
qemu-devel mailing list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's pretty annoying that the pointer reappears at a random place once
after grabbing and ungrabbing the input. Better to restore to the
original position where the pointer was grabbed.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The relative pointer tracking mode was still buggy even after the
previous fix of the motion-notify-event since the events are filtered
out when the pointer moves outside the drawing window due to the
boundary check for the absolute mode.
This patch fixes the issue by moving the unnecessary boundary check
into the if block of absolute mode, and keep the coordinate in the
relative mode even if it's outside the drawing area. But this makes
the coordinate (last_x, last_y) possibly pointing to (-1,-1),
introduce a new flag to indicate the last coordinate has been
updated.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDK motion-notify-event isn't generated when the pointer goes out
of the target window even if the pointer is grabbed, which essentially
means to lose the pointer tracking in gtk-ui.
Meanwhile the generic "event" signal is sent when the pointer is
grabbed, so we can use this and pick the motion notify events manually
there instead.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The subsection already exists in one well-known enterprise Linux
distribution, but for some strange reason the fields were swapped
when forward-porting the patch to upstream.
Limit headaches for said enterprise Linux distributor when the
time will come to rebase their version of QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1396452782-21473-1-git-send-email-pbonzini@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=SD02
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.0.0
# gpg: Signature made Fri 04 Apr 2014 20:25:08 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
dataplane: replace iothread object_add() with embedded instance
iothread: make IOThread struct definition public
dma-helpers: Initialize DMAAIOCB in_cancel flag
block: Check bdrv_getlength() return value in bdrv_append_temp_snapshot()
block: Fix snapshot=on for protocol parsed from filename
qemu-iotests: Remove CR line endings in reference output
block: Don't parse 'filename' option
qcow2: Put cache reference in error case
qcow2: Flush metadata during read-only reopen
iscsi: Don't set error if already set in iscsi_do_inquiry
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before IOThread was its own object, each virtio-blk device would create
its own internal thread. We need to preserve this behavior for
backwards compatibility when users do not specify -device
virtio-blk-pci,iothread=<id>.
This patch changes how the internal IOThread object is created.
Previously we used the monitor object_add() function, which is really a
layering violation. The problem is that this needs to assign a name but
we don't have a name for this internal object.
Generating names for internal objects is a pain but even worse is that
they may collide with user-defined names.
Paolo Bonzini <pbonzini@redhat.com> suggested that the internal IOThread
object should not be named. This way the conflict cannot happen and we
no longer need object_add().
One gotcha is that internal IOThread objects will not be listed by the
query-iothreads command since they are not named. This is okay though
because query-iothreads is new and the internal IOThread is just for
backwards compatibility. New users should explicitly define IOThread
objects.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the IOThread struct definition public so objects can be embedded in
parent structs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initialize the dbs->in_cancel flag in dma_bdrv_io(), since qemu_aio_get()
does not return zero-initialized memory. Spotted by the clang sanitizer
(which complained when the value loaded in dma_complete() was not valid
for a bool type); this might have resulted in leaking the AIO block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify
the originally requested image as the backing file of the newly created
temporary snapshot. This means that the filename is stored in
"file.filename", which is an option that is not parsed for protocol
names. Therefore things like -drive file=nbd:localhost:10809 were
broken because it looked for a local file with the literal name
'nbd:localhost:10809'.
This patch changes the way BDRV_O_SNAPSHOT works once again. We now open
the originally requested image as normal, and then do a similar
operation as for live snapshots to put the temporary snapshot on top.
This way, both driver specific options and parsed filenames work.
As a nice side effect, this results in code movement to factor
bdrv_append_temp_snapshot() out. This is a good preparation for moving
its call to drive_init() and friends eventually.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If the guest attempts to execute from unreadable memory, this will
cause us to longjmp back to the main loop from inside the
target frontend decoder. For linux-user mode, this means we will
still hold the tb_ctx.tb_lock, and will deadlock when we try to
start executing code again. Unlock the lock in the return-from-longjmp
code path to avoid this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andrei Warkentin <andrey.warkentin@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When checking a page range, if we found that a page was
made read-only by QEMU because it contained translated code,
we were incorrectly returning immediately after unprotecting
that page, rather than continuing to check the entire range,
so we might fail to unprotect pages later in the range, or
might incorrectly return a "success" result even if later
pages were not writable.
In particular, this could cause segfaults in a case where
signals are delivered back to back on a target architecture
which uses trampoline code in the stack frame (as AArch64
currently does). The second signal causes a segfault because
the frame cannot be written to (it was protected because
we translated and executed the restorer trampoline, and the
unprotect logic did not unprotect the whole range).
Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com
[PMM: expanded commit message a bit]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the machine models which can have a Cortex-A15 CPU (vexpress-a15 and
midway), silently continue if the CPU object has no reset-cbar property
rather than failing. This allows these boards to be used under KVM with
the "-cpu host" option, since the 'host' CPU object has no reset-cbar
property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
If the user passes an unknown CPU name via the '-cpu' option, exit
with an error message rather than segfaulting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
qemu doesn't print these CRs any more. The test still didn't fail
because the output comparison ignores line endings, but the change turns
up each time when you want to update the output.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When using the QDict option 'filename', it is supposed to be interpreted
literally. The code did correctly avoid guessing the protocol from any
string before the first colon, but it still called bdrv_parse_filename()
which would, for example, incorrectly remove a 'file:' prefix in the
raw-posix driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When qcow2_get_cluster_offset() sees a zero cluster in a version 2
image, it (rightfully) returns an error. But in doing so it shouldn't
leak an L2 table cache reference.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If lazy refcounts are enabled for a backing file, committing to this
backing file may leave it in a dirty state even if the commit succeeds.
The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush
refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare()
doesn't take care to flush metadata.
In order to fix this, this patch also fixes qcow2_mark_clean(), which
contains another ineffective bdrv_flush() call beause lazy refcounts are
disabled only afterwards. All existing callers of qcow2_mark_clean()
either don't modify refcounts or already flush manually, so that this
fixes only a latent, but not yet actually triggerable bug.
Another instance of the same problem is live snapshots. Again, a real
corruption is prevented by an explicit flush for non-read-only images in
external_snapshot_prepare(), but images using lazy refcounts stay dirty.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This eliminates the possible assertion failure in error_setg().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FreeBSD 10.0-RELEASE has bswap16() etc. macros defined in sys/endian.h,
which leads to a conflict with our static inline definitions.
Force using the system version of the macros.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6f1834a2b exposed a bug in openpic_kvm where we don't filter
for memory events that only happen to the region we want to know
events about.
Add proper filtering, fixing the e500plat target with KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1396431718-14908-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max WRITE SAME length is also used when the UNMAP bit is zero, so it
should be queried even if LBPWS=0. Same for the optimal transfer
length.
However, the write_zeroes_alignment only matters for UNMAP=1 so we
still restrict it to LBPWS=1.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Non-block SCSI devices do not support flushing, but we may still send
them requests via bdrv_flush_all. Just ignore them.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets may return "invalid field" as the ASCQ from WRITE SAME
if they support the command only without the UNMAP field. Recognize
that, and return ENOTSUP just like for "invalid operation code".
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This assertion is invalid, because get_sg_list can return an
empty sg-list even for commands that transfer no data (such
as SYNCHRONIZE CACHE).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SystemTap sdt.h sometimes results in compiled probes without sufficient
information to extract arguments. This can be solved in a slightly
hacky way by encouraging the compiler to place arguments into registers.
This patch fixes the apic_reset_irq_delivered() trace event on Fedora 20
with gcc-4.8.2-7.fc20 and systemtap-sdt-devel-2.4-2.fc20 on x86_64.
Signed-off-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
preallocate() only links the first QCowL2Meta's data clusters into the
L2 table and ignores any chained QCowL2Metas in the linked list.
Chains of QCowL2Meta structs are built up when contiguous clusters span
L2 tables. Each QCowL2Meta describes one L2 table update. This is a
rare case in preallocate() but can happen.
This patch fixes preallocate() by iterating over the whole list of
QCowL2Metas. Compare with the qcow2_co_writev() function's
implementation, which is similar but also also handles request
dependencies. preallocate() only performs one allocation at a time so
there can be no dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids a possible division by zero.
Convert s->tracks to unsigned as well because it feels better than
surviving just because the results of calculations with s->tracks are
converted to unsigned anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The first test case would cause a huge memory allocation, leading to a
qemu abort; the second one to a too small malloc() for the catalog
(smaller than s->catalog_size), which causes a read-only out-of-bounds
array access and on big endian hosts an endianess conversion for an
undefined memory area.
The sample image used here is not an original Parallels image. It was
created using an hexeditor on the basis of the struct that qemu uses.
Good enough for trying to crash the driver, but not for ensuring
compatibility.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
