Instead of overloading qmp_dispatcher_co_busy, make the coroutine
pointer NULL. This will make things break spectacularly if somebody
tries to start a request after monitor_cleanup().
AIO_WAIT_WHILE_UNLOCKED() does not need qatomic_mb_read(), because
the macro contains all the necessary memory barriers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up monitor_event to just use monitor_suspend/monitor_resume,
using mon->mux_out to protect against incorrect nesting (especially
on startup).
The only remaining case of reading suspend_cnt is in the can_read
callback, which is just advisory and can use qatomic_read.
As an extra benefit, mux_out is now simply protected by mon_lock.
Also, moving the prompt to the beginning of the main loop removes
it from the output in some error cases where QEMU does not actually
start successfully. It is not a full fix and it would be nice to
also remove the monitor heading, but this is already a small (though
unintentional) improvement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow flushing and printing to the monitor while mon->mon_lock is
held. This will help cleaning up the locking of mon->mux_out and
mon->suspend_cnt.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move monitor_resume()'s call to readline_show_prompt() outside the
potentially locked section. Reuse the existing monitor_accept_input()
bottom half for this purpose.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently when portio_list MemoryRegions are freed using portio_list_destroy() the RCU
thread segfaults generating a backtrace similar to that below:
#0 0x5555599a34b6 in phys_section_destroy ../softmmu/physmem.c:996
#1 0x5555599a37a3 in phys_sections_free ../softmmu/physmem.c:1011
#2 0x5555599b24aa in address_space_dispatch_free ../softmmu/physmem.c:2430
#3 0x55555996a283 in flatview_destroy ../softmmu/memory.c:292
#4 0x55555a2cb9fb in call_rcu_thread ../util/rcu.c:284
#5 0x55555a29b71d in qemu_thread_start ../util/qemu-thread-posix.c:541
#6 0x7ffff4a0cea6 in start_thread nptl/pthread_create.c:477
#7 0x7ffff492ca2e in __clone (/lib/x86_64-linux-gnu/libc.so.6+0xfca2e)
The problem here is that portio_list_destroy() unparents the portio_list
MemoryRegions causing them to be freed immediately, however the flatview
still has a reference to the MemoryRegion and so causes a use-after-free
segfault when the RCU thread next updates the flatview.
Solve the lifetime issue by making MemoryRegionPortioList the owner of the
portio_list MemoryRegions, and then reparenting them to the portio_list
owner. This ensures that they can be accessed as QOM children via the
portio_list owner, yet the MemoryRegionPortioList owns the refcount.
Update portio_list_destroy() to unparent the MemoryRegion from the
portio_list owner (while keeping mrpio->mr live until finalization of the
MemoryRegionPortioList), so that the portio_list MemoryRegions remain
allocated until flatview_destroy() removes the final refcount upon the
next flatview update.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230419151652.362717-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The aim of QOMification is so that the lifetime of the MemoryRegionPortioList
structure can be managed using QOM's in-built refcounting instead of having to
handle this manually.
Due to the use of an opaque pointer it isn't possible to model the new
TYPE_MEMORY_REGION_PORTIO_LIST directly using QOM properties, however since
use of the new object is restricted to the portio API we can simply set the
opaque pointer (and the heap-allocated port list) internally.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230419151652.362717-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to facilitate a conversion of MemoryRegionPortioList to a QOM object
move the allocation of MemoryRegionPortioList ports to the heap instead of
using a variable-length member at the end of the MemoryRegionPortioList
structure.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230419151652.362717-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the OHCI controller's framenumber is incremented, HccaPad1 register
should be set to zero (Ref OHCI Spec 4.4)
ReactOS uses hccaPad1 to determine if the OHCI hardware is running,
consequently it fails this check in current qemu master.
Signed-off-by: Ryan Wendland <wendland@live.com.au>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1048
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The large comment in the patch says it all; the -no-pie flag is broken and
this is why it was not included in QEMU_LDFLAGS before commit a988b4c561
("build: move remaining compiler flag tests to meson", 2023-05-18). And
some distros made things even worse, so we have to add it to the compiler
command line.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1664
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The bindir variable is not available in the "glib" variable, which is an internal
dependency (created with "declare_dependency"). Use glib_pc instead, which contains
the variable as it is instantiated from glib-2.0.pc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to only enable '-Wno-unused-function' if glib's version is
smaller than '2.57.2' and has a G_DEFINE_AUTOPTR_CLEANUP_FUNC()
implementation that doesn't take into account unused functions. But the
compilation test isn't working as intended as '-Wunused-function' isn't
enabled while running it.
Let's enable it.
Fixes: fc9a809e0d ("build: move glib detection and workarounds to meson")
Signed-off-by: Nicolas Saenz Julienne <nsaenz@amazon.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230524173123.66483-1-nsaenz@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on the kernel commit "b0563468ee x86/CPU/AMD: Disable XSAVES on
AMD family 0x17", host system with EPYC-Rome can clear XSAVES capability
bit. In another words, EPYC-Rome host without XSAVES can occur. Thus, we
need an EPYC-Rome cpu model (without this feature) that matches the
solution of fixing this erratum
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-Id: <20230524213748.8918-1-davydov-max@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix for a memory corruption due to an extra free
* Fix for a compile breakage
-----BEGIN PGP SIGNATURE-----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=TA2V
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20230524' of https://github.com/legoater/qemu into staging
vfio queue:
* Fix for a memory corruption due to an extra free
* Fix for a compile breakage
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmRtyB4ACgkQUaNDx8/7
# 7KFQvRAAhexL/Q8rWM8og+VESL5gPlpxDhWCI+l76+YJqQzZkgebwZ5rw920f8EG
# bRs5AAk8fPTX/qKKq/JkYMmQwpM2jo8W4elcNumm44WAG7hDwd1LQ3nAZeOcvgU0
# jQ1IwRYcgNo+oOTN9b7GhePQK27OraliLUrf/sBGUWvbdAttVc2pcB91CMur0Dxb
# 9KK2vEA4MJ9B8zf2/ZkaK6Z+28GsratR7803Nvv25rm5sP3VBb9w0TnKZAOmaHLv
# X5Tz8yjNvQxxzB9SzgOK6yMtnrp42ArVC5u2aDa33uzSWUeFiTF1HEFeGAps2nJg
# 8tSNo0fTKhznrVR3q2pyxC05Dp+jmKicrmivc26iBdAWAUxQYX44UQoLYD5ISdti
# nlSE+Is+0ZE5E2tHE9yAOPa4rrXHNBqpueu+VMPbYMyVEqzblP7twYe6HkGPYhrD
# zbx/ABZAAGOf+3YmyL1yQrCc0WyJ2lHDySQt/llMrhkBTCHGEF8yjfWFypluZFWX
# X7Mb0YZP0qPpFsV3TDcrqV3onaFSNehp2EJs2EJAa/DeUNbnKlz4LiYBzZE95egb
# 9PGrLnB5w1Vlp44H+ctrnYj55TnspHT+Qqwvhkr/vOMupZukbGus0VFIU2IDrh2g
# qEqhaigwxfVyZ1Eqwti4IgX8RVX8bW43slR33aD6vsO7jpiP2Pk=
# =TA2V
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 May 2023 01:17:34 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20230524' of https://github.com/legoater/qemu:
util/vfio-helpers: Use g_file_read_link()
vfio/pci: Fix a use-after-free issue
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Custom values for the gitlab-runner Helm chart.
See https://wiki.qemu.org/Testing/CI/KubernetesRunners.
Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-6-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This allows to set a job tag dynamically.
We need this to be able to select the Kubernetes runner.
See https://wiki.qemu.org/Testing/CI/KubernetesRunners.
Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-5-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wait for docker info to return successfuly to ensure that
the docker server (daemon) started.
This is needed for jobs running on Kubernetes.
See https://wiki.qemu.org/Testing/CI/KubernetesRunners.
Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-4-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the same tag in all jobs.
Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-3-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are not needed when using gitlab.com shared runners.
Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-2-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When _FORTIFY_SOURCE=2, glibc version is 2.35, and GCC version is
12.1.0, the compiler complains as follows:
In file included from /usr/include/features.h:490,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdint.h:26,
from /usr/lib/gcc/aarch64-unknown-linux-gnu/12.1.0/include/stdint.h:9,
from /home/alarm/q/var/qemu/include/qemu/osdep.h:94,
from ../util/vfio-helpers.c:13:
In function 'readlink',
inlined from 'sysfs_find_group_file' at ../util/vfio-helpers.c:116:9,
inlined from 'qemu_vfio_init_pci' at ../util/vfio-helpers.c:326:18,
inlined from 'qemu_vfio_open_pci' at ../util/vfio-helpers.c:517:9:
/usr/include/bits/unistd.h:119:10: error: argument 2 is null but the corresponding size argument 3 value is 4095 [-Werror=nonnull]
119 | return __glibc_fortify (readlink, __len, sizeof (char),
| ^~~~~~~~~~~~~~~
This error implies the allocated buffer can be NULL. Use
g_file_read_link(), which allocates buffer automatically to avoid the
error.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vbasedev->name is freed wrongly which leads to garbage VFIO trace log.
Fix it by allocating a dup of vbasedev->name and then free the dup.
Fixes: 2dca1b37a7 ("vfio/pci: add support for VF token")
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
util: Use cpu detection for bufferiszero
migration: Use cpu detection for xbzrle
tcg: Replace and remove cpu_atomic_{ld,st}o*
host/include: Split qemu/atomic128.h
tcg: Remove DEBUG_DISAS
tcg: Remove USE_TCG_OPTIMIZATIONS
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmRtbwAdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8xlgf7B/RnVG7u7Hjndr6h
fH07ujjElAivs+H05S0GGbQYpSNlqVv8PzXT2olJTAe15ryb537dCkqxyKW53vgb
pUWzZf9Zy8XfN48W5V91dSKQE3gm5wBlOM6LI85F8XrIQyjZqkHti+rw3GxsamNL
8n2euOR0vx/jculBRxvZUAJDzb/0shN583mC5+wX/KInCHiNmMC6sCggyd5bpFJZ
1wqWwrUCqJ0KAAYKd9WrIKt6QwAX3kUDiBQPa1g+psBjZ1CYQ4lqZZn9uYQ4hEtG
yBnT0ER2LOBQaKXJ0BrdG5c/mUNX7WkLBDTb+QjGGkfPc/bHIirXqeFzuyrXahg8
kY155w==
=XH8Z
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230523-3' of https://gitlab.com/rth7680/qemu into staging
util: Host cpu detection for x86 and aa64
util: Use cpu detection for bufferiszero
migration: Use cpu detection for xbzrle
tcg: Replace and remove cpu_atomic_{ld,st}o*
host/include: Split qemu/atomic128.h
tcg: Remove DEBUG_DISAS
tcg: Remove USE_TCG_OPTIMIZATIONS
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmRtbwAdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8xlgf7B/RnVG7u7Hjndr6h
# fH07ujjElAivs+H05S0GGbQYpSNlqVv8PzXT2olJTAe15ryb537dCkqxyKW53vgb
# pUWzZf9Zy8XfN48W5V91dSKQE3gm5wBlOM6LI85F8XrIQyjZqkHti+rw3GxsamNL
# 8n2euOR0vx/jculBRxvZUAJDzb/0shN583mC5+wX/KInCHiNmMC6sCggyd5bpFJZ
# 1wqWwrUCqJ0KAAYKd9WrIKt6QwAX3kUDiBQPa1g+psBjZ1CYQ4lqZZn9uYQ4hEtG
# yBnT0ER2LOBQaKXJ0BrdG5c/mUNX7WkLBDTb+QjGGkfPc/bHIirXqeFzuyrXahg8
# kY155w==
# =XH8Z
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 May 2023 06:57:20 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20230523-3' of https://gitlab.com/rth7680/qemu: (28 commits)
tcg: Remove USE_TCG_OPTIMIZATIONS
tcg: Remove DEBUG_DISAS
qemu/atomic128: Add runtime test for FEAT_LSE2
qemu/atomic128: Improve cmpxchg fallback for atomic16_set
tcg: Split out tcg/debug-assert.h
accel/tcg: Correctly use atomic128.h in ldst_atomicity.c.inc
qemu/atomic128: Split atomic16_read
accel/tcg: Eliminate #if on HAVE_ATOMIC128 and HAVE_CMPXCHG128
accel/tcg: Remove prot argument to atomic_mmu_lookup
accel/tcg: Remove cpu_atomic_{ld,st}o_*_mmu
target/s390x: Always use cpu_atomic_cmpxchgl_be_mmu in do_csst
target/s390x: Use cpu_{ld,st}*_mmu in do_csst
accel/tcg: Unify cpu_{ld,st}*_{be,le}_mmu
target/s390x: Use tcg_gen_qemu_{ld,st}_i128 for LPQ, STPQ
target/ppc: Use tcg_gen_qemu_{ld,st}_i128 for LQARX, LQ, STQ
include/qemu: Move CONFIG_ATOMIC128_OPT handling to atomic128.h
meson: Fix detect atomic128 support with optimization
include/host: Split out atomic128-ldst.h
include/host: Split out atomic128-cas.h
util: Add cpuinfo-aarch64.c
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is always defined, and the optimization pass is
essential to producing reasonable code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been set since the beginning, is never undefined,
and it would seem to be harmful to debugging to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With FEAT_LSE2, load and store of int128 is directly supported.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use __sync_bool_compare_and_swap_16 to control the loop,
rather than a separate comparison.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the locally defined load_atomic16 and store_atomic16,
along with HAVE_al16 and HAVE_al16_fast in favor of the
routines defined in atomic128.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create both atomic16_read_ro and atomic16_read_rw.
Previously we pretended that we had atomic16_read in system mode,
because we "know" that all ram is always writable to the host.
Now, expose read-only and read-write versions all of the time.
For aarch64, do not fall back to __atomic_read_16 even if
supported by the compiler, to work around a clang bug.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These symbols will shortly become dynamic runtime tests and
therefore not appropriate for the preprocessor. Use the
matching CONFIG_* symbols for that purpose.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that load/store are gone, we're always passing
PAGE_READ | PAGE_WRITE for RMW atomic operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Atomic load/store of 128-byte quantities is now handled
by cpu_{ld,st}16_mmu.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Eliminate the CONFIG_USER_ONLY specialization.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use cpu_ld16_mmu and cpu_st16_mmu to eliminate the special case,
and change all of the *_data_ra functions to match.
Note that we check the alignment of both compare and store
pointers at the top of the function, so MO_ALIGN* may be
safely removed from the individual memory operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No need to roll our own, as this is now provided by tcg.
This was the last use of retxl, so remove that too.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No need to roll our own, as this is now provided by tcg.
This was the last use of retxl, so remove that too.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Not only the routines in ldst_atomicity.c.inc need markup,
but also the ones in the headers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Silly typo: sizeof(16) != 16.
Fixes: e61f1efeb7 ("meson: Detect atomic128 support with optimization")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Separates the aarch64-specific portion into its own file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Separates the aarch64-specific portion into its own file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the code from tcg/. The only use of these bits so far
is with respect to the atomicity of tcg operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The items in migration_files are built for libmigration and included
info softmmu_ss from there; no need to also include them directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform the function selection once, and only if CONFIG_AVX512_OPT
is enabled. Centralize the selection to xbzrle.c, instead of
spreading the init across 3 files.
Remove xbzrle-bench.c. The benefit of being able to benchmark
the different implementations is less important than not peeking
into the internals of the implementation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Place the CONFIG_AVX512BW_OPT block at the top,
which will aid function selection in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use cpuinfo_init() during init_accel(), and the variable cpuinfo
during test_buffer_is_zero_next_accel(). Adjust the logic that
cycles through the set of accelerators for testing.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the CPUINFO_* bits instead of the individual boolean
variables that we had been using. Remove all of the init
code that was moved over to cpuinfo-i386.c.
Note that have_avx512* check both AVX512{F,VL}, as we had
previously done during tcg_target_init.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a bit to indicate when VMOVDQU is also atomic if aligned.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cpuinfo.h for i386 and x86_64, and the initialization
for that in util/. Populate that with a slightly altered
copy of the tcg host probing code. Other uses of cpuid.h
will be adjusted one patch at a time.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The entire contents of the header is host-specific, but the
existence of such a header is not, which could prevent some
host specific ifdefs at the top of the file for the include.
Add host/include/{arch,generic} to the project arguments.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
