The qemu-trace-stap documentation is currently in
scripts/qemu-trace-stap.texi in Texinfo format, which we
present to the user as:
* a qemu-trace-stap manpage
* but not (unusually for QEMU) part of the HTML docs
Convert the documentation to rST format that lives in
the docs/ subdirectory, and present it to the user as:
* a qemu-trace-stap manpage
* part of the interop/ Sphinx manual
There are minor formatting changes to suit Sphinx, but no
content changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-8-peter.maydell@linaro.org
The qemu-img documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-img manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-img manpage
* part of the interop/ Sphinx manual
The qemu-img rST document uses the new hxtool extension
to handle pulling rST fragments out of qemu-img-cmds.hx.
The documentation of the various options and commands is rather
muddled, with some options being described inside the relevant
command description and some in a more general section near the start
of the manual. All the command synopses are replicated in the .hx
file and then again in the manual. A lot of text is also duplicated
in the qemu-img.c code for the help text. I have not attempted to
deal with any of this, but have simply transposed the existing
structure into rST.
As usual, there are some minor formatting changes but no
textual changes, except that as with one or two other conversions
I have dropped the 'see also' section since it's not very
informative and looks odd in the HTML.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-6-peter.maydell@linaro.org
Sphinx will corrupt its doctree cache if we run two copies
of it in parallel. In commit 6bda415c10 we worked
around this by having separate doctrees for 'html' vs 'manpage'
runs. However now that we have more than one manpage produced
from a single manual we can run into this again when trying
to produce the two manpages.
Use the trick described in 'Atomic Rules in GNU Make'
https://www.cmcrossroads.com/article/atomic-rules-gnu-make
to ensure that we only run the Sphinx manpage builder once
for each manual, even if we're producing several manpages.
This fixes doctree corruption in parallel builds and also
avoids pointlessly running Sphinx more often than we need to.
(In GNU Make 4.3 there is builtin support for this, via
the "&:" syntax, but we can't wait for that to be available
in all the distros we support...)
The generic "one invocation for multiple output files"
machinery is provided as a macro named 'atomic' in rules.mak;
we then wrap this in a more specific macro for defining
the rule and dependencies for the manpages in a Sphinx
manual, to avoid excessive repetition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-2-peter.maydell@linaro.org
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS. All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).
So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:
1) options that are already in CFLAGS, for example "-g"
2) duplicate options
At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options. For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).
Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
-----BEGIN PGP SIGNATURE-----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=UUVN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b' into staging
virtiofsd first pull v2
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
# gpg: Signature made Thu 23 Jan 2020 16:45:18 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b: (108 commits)
virtiofsd: add some options to the help message
virtiofsd: stop all queue threads on exit in virtio_loop()
virtiofsd/passthrough_ll: Pass errno to fuse_reply_err()
virtiofsd: Convert lo_destroy to take the lo->mutex lock itself
virtiofsd: add --thread-pool-size=NUM option
virtiofsd: fix lo_destroy() resource leaks
virtiofsd: prevent FUSE_INIT/FUSE_DESTROY races
virtiofsd: process requests in a thread pool
virtiofsd: use fuse_buf_writev to replace fuse_buf_write for better performance
virtiofsd: add definition of fuse_buf_writev()
virtiofsd: passthrough_ll: Use cache_readdir for directory open
virtiofsd: Fix data corruption with O_APPEND write in writeback mode
virtiofsd: Reset O_DIRECT flag during file open
virtiofsd: convert more fprintf and perror to use fuse log infra
virtiofsd: do not always set FUSE_FLOCK_LOCKS
virtiofsd: introduce inode refcount to prevent use-after-free
virtiofsd: passthrough_ll: fix refcounting on remove/rename
libvhost-user: Fix some memtable remap cases
virtiofsd: rename inode->refcount to inode->nlookup
virtiofsd: prevent races with lo_dirp_put()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
libcap-ng reads /proc during capng_get_caps_process, and virtiofsd's
sandboxing doesn't have /proc mounted; thus we have to do the
caps read before we sandbox it and save/restore the state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Only allow system calls that are needed by virtiofsd. All other system
calls cause SIGSYS to be directed at the thread and the process will
coredump.
Restricting system calls reduces the kernel attack surface and limits
what the process can do when compromised.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
with additional entries by:
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: piaojun <piaojun@huawei.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Eric Ren <renzhen@linux.alibaba.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Install a vhost-user.json file describing virtiofsd. This allows
libvirt and other management tools to enumerate vhost-user backend
programs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wire up the building of the virtiofsd in tools.
virtiofsd relies on Linux-specific system calls and seccomp. Anyone
wishing to port it to other host operating systems should do so
carefully and without reducing security.
Only allow building on Linux hosts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The qemu-block-drivers documentation is currently in
docs/qemu-block-drivers.texi in Texinfo format, which we present
to the user as:
* a qemu-block-drivers manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-block-drivers manpage
* part of the system/ Sphinx manual
This follows the same pattern we've done for qemu-ga and qemu-nbd.
We have to drop a cross-reference from the documentation of the
-cdrom option back to the qemu-block-drivers documentation, since
they're no longer within the same texinfo document.
As noted in a comment, the manpage output is slightly compromised
due to limitations in Sphinx. In an ideal world, the HTML output
would have the various headings like 'Disk image file formats'
as top-level section headings (which then appear in the overall
system manual's table-of-contents), and it would not have the
section headings which make sense only for the manpage like
'synopsis', 'description', and 'see also'. Unfortunately, the
mechanism Sphinx provides for restricting pieces of documentation
is limited to the point of being flawed: the 'only::' directive
is implemented as a filter that is applied at a very late stage
in the document processing pipeline, rather than as an early
equivalent of an #ifdef. This means that Sphinx's process of
identifying which section heading markup styles are which levels
of heading gets confused if the 'only::' directive contains
section headings which would affect the heading-level of a
later heading. I have opted to prioritise making the HTML format
look better, with the compromise being that in the manpage
the 'Disk image file formats' &c headings are top-level headings
rather than being sub-headings under the traditional 'Description'
top-level section title.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-4-peter.maydell@linaro.org
We want a user-facing manual which contains system emulation
documentation. Create an empty one which we can populate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-3-peter.maydell@linaro.org
The qemu-nbd documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-nbd manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-nbd manpage
* part of the interop/ Sphinx manual
This follows the same pattern as commit 27a296fce9 did for the
qemu-ga manpage.
All the content of the old manpage is retained, except that I have
dropped the "This is free software; see the source for copying
conditions. There is NO warranty..." text that was in the old AUTHOR
section; Sphinx's manpage builder doesn't expect that much text in
the AUTHOR section, and since none of our other manpages have it it
seems easiest to delete it rather than try to figure out where else
in the manpage to put it.
The only other textual change is that I have had to give the
--nocache option its own description ("Equivalent to --cache=none")
because Sphinx doesn't have an equivalent of using item/itemx
to share a description between two options.
Some minor aspects of the formatting have changed, to suit what is
easiest for Sphinx to output. (The most notable is that Sphinx
option section option syntax doesn't support '--option foo=bar'
with bar underlined rather than bold, so we have to switch to
'--option foo=BAR' instead.)
The contents of qemu-option-trace.texi are now duplicated in
docs/interop/qemu-option-trace.rst.inc, until such time as we complete
the conversion of the other files which use it; since it has had only
3 changes in 3 years, this shouldn't be too awkward a burden.
(We use .rst.inc because if this file fragment has a .rst extension
then Sphinx complains about not seeing it in a toctree.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-2-peter.maydell@linaro.org
The MANUAL_BUILDDIR directory is automatically created by sphinx-build
for the other targets. The index.html target does not use sphinx-build
so we must manually create the directory to avoid the following error:
GEN docs/built/index.html
/bin/sh: docs/built/index.html: No such file or directory
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120163400.603449-1-stefanha@redhat.com
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
There is no index.html start page for the QEMU HTML documentation. An
index page is needed so that documentation can be browsed easily on the
web.
This patch adds an index.html.in template file where the QEMU version
number is expanded. It is written in HTML instead of using the existing
sphinx (rST) and texi documentation generators because they are
heavyweight and would make this harder.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191219135620.1626608-1-stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Turn off Sphinx nitpicking as a temporary (?) measure so
sphinx builds complete even with warnings about missing
references.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-11-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qcrypto_random_*, AES and qcrypto_init do not need to be linked as a whole
and are the only parts that are used by user-mode emulation. Place them
in libqemuutil, so that whatever needs them will pick them up automatically.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-user-gpu is always built and installed, but it is not part of the emulator
proper. Cut it if --disable-tools is specified.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtfs-proxy-helper is the only user of libcap; everyone else is using
the simpler libcap-ng API. Switch and remove the configure code to
detect libcap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[groug: - drop remaining -lcap from Makefile
- fix error message in configure]
Signed-off-by: Greg Kurz <groug@kaod.org>
Commit 0d5fae3e52 introduced bios-microvm.bin but forgot to add
it to the list of blobs being installed.
Add it to the list of BLOBS that get installed.
Fixes: 0d5fae3e52 "roms: add microvm-bios (qboot) as binary"
Signed-off-by: Bruce Rogers <brogers@suse.com>
[PMD: Reworded description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191102114346.6445-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The EDK2 firmware blobs only target the X86/ARM architectures.
Define the DECOMPRESS_EDK2_BLOBS variable and only decompress
the blobs when the variable exists.
See also: 536d2173b2 ("roms: build edk2 firmware binaries ...")
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191108114531.21518-2-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When hw/$DIR/Kconfig is changed, the corresponding generated
hw/$DIR/config-devices.mak is not being updated.
Fix this by including all the hw/*/Kconfig files to the prerequisite
names of the rule generating the config-devices.mak files.
Fixes: e0e312f352 (build: switch to Kconfig)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved into plugins]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved directory and merged various fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The QAPI code generator clocks in at some 3100 SLOC in 8 source files.
Almost 60% of the code is in qapi/common.py. Split it into more
focused modules:
* Move QAPISchemaPragma and QAPISourceInfo to qapi/source.py.
* Move QAPIError and its sub-classes to qapi/error.py.
* Move QAPISchemaParser and QAPIDoc to parser.py. Use the opportunity
to put QAPISchemaParser first.
* Move check_expr() & friends to qapi/expr.py. Use the opportunity to
put the code into a more sensible order.
* Move QAPISchema & friends to qapi/schema.py
* Move QAPIGen and its sub-classes, ifcontext,
QAPISchemaModularCVisitor, and QAPISchemaModularCVisitor to qapi/gen.py
* Delete camel_case(), it's unused since commit e98859a9b9 "qapi:
Clean up after recent conversions to QAPISchemaVisitor"
A number of helper functions remain in qapi/common.py. I considered
moving the code generator helpers to qapi/gen.py, but decided not to.
Perhaps we should rewrite them as methods of QAPIGen some day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-7-armbru@redhat.com>
[Add "# -*- coding: utf-8 -*-" lines]
sphinx-build is buggy when multiple processes are using the same
doctree directory in parallel. See the 3-year-old Sphinx bug
report at: https://github.com/sphinx-doc/sphinx/issues/2946
Instead of avoiding parallel builds or adding some kind of
locking, I'm using the simplest solution: just using a different
doctree cache for each builder.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20191014150133.14318-1-ehabkost@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The slirp sub-module complains about not being able to find the glib
library on cross-compiles because it is using the default pkg-config
tool (which isn't installed in our cross-build docker images).
Preserve PKG_CONFIG in our host config and pass it down to slirp.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In commit 27a296fce9 we switched the qemu-ga manpage over to
being built from Sphinx. The makefile rules for this were correct
for an out-of-tree build, but break for in-tree builds if Sphinx is
present and we're trying to build the documentation.
Specifically, because Sphinx refuses to build output files into
the same directory as its sources, for an in-tree build we tell
it to build into a subdirectory docs/built, and set up a makefile
variable MANUAL_BUILDDIR indicating where the docs are going.
The makefile rule telling Make how to build qemu-ga.8 correctly
used this variable, but the lines adding qemu-ga.8 to the list
of DOCS to be built and the 'make install' rune did not. The
effect was that for an in-tree build we told Make to build
'docs/interop/qemu-ga.8' but did not provide a specific rule for
doing so, which caused Make to fall back to the old rules.make
rule for building any "%.8" file. Make tried to invoke texi2pod
with a bogus command line, resulting in the error:
GEN docs/interop/qemu-ga.8
No filename or title
make: *** [rules.mak:394: docs/interop/qemu-ga.8]
Fix this by using $(MANUAL_BUILDDIR) when constructing the
list of DOCS files we want to build and also in the source
file name we install for 'make install'.
(Among other things, this broke the Shippable CI builds.)
Fixes: 27a296fce9
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190919155957.12618-1-peter.maydell@linaro.org
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The qemu-ga documentation is currently in qemu-ga.texi in
Texinfo format, which we present to the user as:
* a qemu-ga manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-ga manpage
* part of the interop/ Sphinx manual
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 20190905131040.8350-1-peter.maydell@linaro.org
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Allow to specify the container engine to run with ENGINE variable.
By default, ENGINE=auto and will select either podman or docker.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Defining CONFIG_TOOLS on the basis of $(TOOLS) has the disadvantage
of including it also if e.g. qemu-ga is requested. The correct
information is available in configure, define it there.
This also has the benefit of not installing the manpages for block layer
tools if the only "tool" being built is the guest agent.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-ga is included in the TOOLS variable without the .exe suffix, and this is
then worked around twice in the Makefile. Do the right thing in configure
instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The resulting firmware files should only contain the runtime path.
Fixes commit 26ce90fde5 ("Makefile: install the edk2 firmware images
and their descriptors")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190530192812.17637-1-olaf@aepfle.de>
Fixes: https://bugs.launchpad.net/qemu/+bug/1838703
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
contrib/elf2dmp has a source file which uses curl/curl.h;
although we link the final executable with CURL_LIBS, we
forgot to build this source file with CURL_CFLAGS, so if
the curl header is in a place that's not already on the
system include path then it will fail to build.
Add a line specifying the cflags needed for download.o;
while we are here, bring the specification of the libs
into line with this, since using a per-object variable
setting is preferred over adding them to the final
executable link line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190719100955.17180-1-peter.maydell@linaro.org
Add OpenSBI version 0.4 as a git submodule and as a prebult binary.
OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source
reference implementation of the RISC-V Supervisor Binary Interface (SBI)
specifications for platform-specific firmwares executing in M-mode. For all
supported platforms, OpenSBI provides several runtime firmware examples.
These example firmwares can be used to replace the legacy riscv-pk bootloader
and enable the use of well-known bootloaders such as U-Boot.
OpenSBI is distributed under the terms of the BSD 2-clause license
("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI
source code also contains code reused from other projects desribed here:
https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md.
In this case all of the code we are using from OpenSBI is BSD 2-clause
as we aren't using the Kendryte code (Apache-2.0) with QEMU and libfdt
is dual licensed as BSD 2-clause (and GPL-2.0+). OpenSBI isn't being
linked with QEMU either it is just being included with QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The qemu-doc.{html,info,pdf,txt} depend on qemu-doc.texi and its
include files. Except qemu-tech.texi is missing. Has always been
missing as far as I can see. Fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190715055736.15214-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Until recently, target install used to recurse into target directories
in its recipe: it ran make install in a for-loop. Since target
install depends on target all, this trivially ensured we run the
sub-make install only after completing target all.
Commit 1338a4b "Makefile: Reuse all's recursion machinery for clean
and install" moved the target recursion to dependencies. That's good
(the commit message explains why), but I forgot to add dependencies to
ensure make runs the sub-make install only after completing target
all. Do that now.
Fixes: 1338a4b726
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190712055935.23061-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Recent commit "Makefile: Reuse all's recursion machinery for clean and
install" broke targets clean and distclean in the source directory
before running configure:
$ make clean
LD recurse-clean.mo
cc: fatal error: no input files
compilation terminated.
make: *** [rules.mak:118: recurse-clean.mo] Error 1
Root cause is missing .PHONY. Fix that.
Fixes: 1338a4b726
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have 'make check-help', use the 'make vm-help' form
to display helps about VM testing. Keep the old target to not
bother old customs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190531064341.29730-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Targets "clean" and "install" run make recursively in a for loop.
This ignores -j and -k. Target "all" depends on SUBDIR/all to recurse
into each SUBDIR. Behaves nicely with -j and -k. Put that to use for
"clean" and "install": depend on SUBDIR/clean or SUBDIR/install,
respectively, and delete the loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190528082308.22032-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We make a few sub-directories recursively, in particular
$(TARGET_DIRS).
For goal "all", we do it the nice way: "all" has a prerequisite
subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make
recursively. Behaves nicely with -j and -k.
For other goals such as "clean" and "install", the recipe runs make
recursively in a for loop. Ignores -j and -k.
The next commit will fix that for "clean" and "install". This commit
prepares the ground by renaming the targets we use for "all" to
include the goal for the sub-make. This will permit reusing them for
goals other than "all".
Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename
to T/all, and declare phony.
Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default
goal is "all" for all R. Rename to pc-bios/R/all, and declare phony.
The remainder are renamed just for consistency.
Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to
dtc/all, and declare phony.
Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE)
in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony.
Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is
all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and
declare phony.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-4-armbru@redhat.com>
[Add compatibility gunk to keep make working across the rename]
When commit df2943ba3c moved "rm -f qemu-options.def" from distclean
to clean, it also added "rm -f $$d/qemu-options.def" to the for d in
$(ALL_SUBDIRS) loop. That file doesn't exist. Remove the mistaken
rm.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-3-armbru@redhat.com>
When commit bdf523e692 made configure generate config.status, it
added a fallback to Makefile to smooth the transition, with a TODO
"code can be removed after QEMU 1.7." It's been more than five years.
Remove it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-2-armbru@redhat.com>
The GNU make manual[1] demonstrates $(DESTDIR)$(bindir)/foo and QEMU
mostly follows that. There are just a few instances of
$(DESTDIR)/$(bindir)/foo. Fix these inconsistencies.
[1] https://www.gnu.org/software/make/manual/html_node/DESTDIR.html
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190521145318.12787-1-stefanha@redhat.com
Message-Id: <20190521145318.12787-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The configure script breaks when the qemu source directory is in a path
containing white spaces, in particular the list of targets is not
correctly generated when calling "./configure --help" because of how the
default_target_list variable is built.
In addition to that, *building* qemu from a directory with spaces breaks
some assumptions in the Makefiles, even if the original source path does
not contain spaces like in the case of an out-of-tree build, or when
symlinks are involved.
To avoid these issues, refuse to run the configure script and the
Makefile if there are spaces or colons in the source path or the build
path, taking as inspiration what the kbuild system in linux does.
Buglink: https://bugs.launchpad.net/qemu/+bug/1817345
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com>
Message-Id: <20190526144747.30019-3-ao2@ao2.it>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now we have some rST format docs in the docs/specs/ manual, we should
actually build and install it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190610152444.20859-3-peter.maydell@linaro.org
Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is
associated with a vhost-user-gpu device.
Various TODO and nice to have items:
- multi-head support
- crash & resume handling
- accelerated rendering/display that avoids the waiting round trips
- edid support
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 337f2311f actually claimed to do this in the commit log but
didn't actually. Oops.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzllrsdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9/qAgAuYpF/gHrkfT+IFrw
OsgV1pPdhh+opxp44ayIQ6VC64voij0k/NnmC3/BxRv89yPqchvA6m0c2jzfGuwZ
ICpDt7LvFTrG9k8X9vEXbOTfh5dS/5g1o0LXiGU9RmMaC/5z2ZIabxU8K1Ti3+X0
P3B5s65rRQ8fPzOAMLEjeaHYQ/AOX/CNsmgFDve+d0b9tJY99UVO3Pb0h3+eR0s3
/4AHWG+IACGX7MVgFIfkEbGVnwboNiT20MUq3Exn2yGgg0IbLfoUazOnbfRz9jkX
kbN6nAZ+WDynf31SvvkEL/P6W5medf58ufJOiBB8opIp1E4WDdM30V8RkkPOyj4z
YOBmSw==
=2RnL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into staging
Introduce qemu_guest_getrandom.
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
# gpg: Signature made Wed 22 May 2019 19:36:43 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-rng-20190522: (25 commits)
target/i386: Implement CPUID_EXT_RDRAND
target/ppc: Use qemu_guest_getrandom for DARN
target/ppc: Use gen_io_start/end around DARN
target/arm: Implement ARMv8.5-RNG
target/arm: Put all PAC keys into a structure
hw/misc/exynos4210_rng: Use qemu_guest_getrandom
hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail
hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail
aspeed/scu: Use qemu_guest_getrandom_nofail
linux-user: Remove srand call
linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys
linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM
linux-user: Call qcrypto_init if not using -seed
linux-user: Initialize pseudo-random seeds for all guest cpus
cpus: Initialize pseudo-random seeds for all guest cpus
util: Add qemu_guest_getrandom and associated routines
ui/vnc: Use gcrypto_random_bytes for start_auth_vnc
ui/vnc: Split out authentication_failed
crypto: Change the qcrypto_random_bytes buffer type to void*
crypto: Use getrandom for qcrypto_random_bytes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For user-only, we require only the random number bits of the
crypto subsystem. Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.
Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a vhost-user input backend example, based on virtio-input-host
device. It takes an evdev path as argument, and can be associated with
a vhost-user-input device via a UNIX socket:
$ vhost-user-input -p /dev/input/eventX -s /tmp/vui.sock
$ qemu ... -chardev socket,id=vuic,path=/tmp/vui.sock
-device vhost-user-input-pci,chardev=vuic
This example is intentionally not included in $TOOLS, and not
installed by default.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190514104126.6294-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some objects are only needed for system emulation and tools.
We can ignore them for the user mode case
Update tests to run accordingly: conditionally build some tests
on CONFIG_BLOCK.
Some tests use components that are only built when softmmu or
block tools are enabled, not for linux-user. So, if these components
are not available, disable the tests.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190401141222.30034-6-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Move the dependency from SUBDIR_RULES to SOFTMMU_SUBDIR_RULES
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-5-lvivier@redhat.com>
When possible use generated-files-$(FLAG) to disable
some targets (like KEYCODEMAP_FILES).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-3-lvivier@redhat.com>
The Makefile tries to include device Kconfig dependencies via
-include $(SUBDIR_DEVICES_MAK_DEP)
and thus expects files that match *-softmmu/config-devices.mak.d ...
however, the minikconf script currently generates files a la
"*-softmmu-config.devices.mak.d" instead, so the dependency files
simply got ignored so far. For example, after a "touch hw/arm/Kconfig",
the arm-softmmu/config-devices.mak file is currently not re-generated.
Fix it by putting the dependency files in the *-softmmu folders now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This new chapter in the QEMU documentation covers the security
requirements that QEMU is designed to meet and principles for securely
deploying QEMU.
It is just a starting point that can be extended in the future with more
information.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190509121820.16294-3-stefanha@redhat.com
Message-Id: <20190509121820.16294-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 48ff7a625b added the QEMU Guest Agent tool with the
optional ".exe" suffix for Windows hosts, but forgot to use
this suffix in the 'clean' rule. Calling this rule let a dangling
executable in the build directory.
Correct this by using the proper optional suffix.
Fixes: 48ff7a625b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20190427161322.24642-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use a CONFDIR variable to show the configured sysconf path in the
generated documentations (html, man pages etc).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1644985
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181126105125.30973-1-marcandre.lureau@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
CFLAGS/LDFLAGS have debug and sanitizers flags, which should be passed
to slirp compilation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190424110041.8175-2-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
If we add references that don't resolve (or accidentally remove them),
it will be helpful to have warning messages alerting us to that.
Further, turn those warnings into errors so we can be alerted to these
problems sooner rather than later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-2-jsnow@redhat.com
[adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Decompress and install the edk2 firmware blobs as part of "make install",
unless blob installation was disabled with configure's "--disable-blobs"
option.
Additionally, decompress the blobs as a pre-requisite for building softmmu
binaries -- this is helpful for both "make check" and other ad-hoc tests
one might want to run in the build directory.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This ensures that softmmu directories are culled after a
"./configure --target-list=x86_64-linux-user".
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For devices that require msi_init/msix_init to succeed, add a
dependency on CONFIG_MSI_NONBROKEN. This will prevent those devices
from appearing in a binary that cannot instantiate them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- various CI tweaks and fixes
- fixes for some tcg tests
- addition of system tcg tests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlyH50wACgkQ+9DbCVqe
KkTXUAgAg8xQZa25VAIV/I/YcYPRRyqFxzP9bTgWoDrAbInxxge2HvTXsLsQ+uYu
CYdcqHFVMMXWFj+tPq/nolvR9hTLy76rbpZN1sCBZ75OEj2ZYULI8a/B9hSUstTd
/6wC2Mf/k0KDTByBX9tv303YBNi2J3LSODTvpZWQgiZpfnZ08agrOOsUXXDjcDie
506WozssJmJcsAHORYoNFX7q9NNOzLCzoa2Ulme+nyIy2wZIsiG34GjH0DjDkLmg
kt/azpBtvpW8zbTaXgorjQIwFS3cil6H7mXgj712K+Xg8+1XgOgBUqaHh43hc63d
CtkcB1IK3oQq0UArneTy/JwphC+9Dg==
=vg+Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-for-4.0-120319-1' into staging
Final testing fixes for 4.0
- various CI tweaks and fixes
- fixes for some tcg tests
- addition of system tcg tests
# gpg: Signature made Tue 12 Mar 2019 17:07:24 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-for-4.0-120319-1: (26 commits)
.travis.yml: add softmmu check-tcg tests
.travis.yml: separate softfloat from check-tcg
tests/tcg/arm: account for pauth randomness
tests/tcg/i386: add memory test to exercise softmmu
tests/tcg/i386: add system mode Hello World test
tests/tcg: provide a minilib for system tests
tests/tcg: enable cris base user-mode tests
tests/tcg/cris: align mul operations
tests/tcg/cris: comment out the ccs test
tests/tcg: split cris tests into bare and libc directories
tests/tcg/cris: cleanup sys.c
tests/docker: add fedora-cris-cross compilers
tests/tcg/arm: add ARMv6-M UNDEFINED 32-bit instruction test
tests/tcg/xtensa: enable system tests
tests/docker: add debian-xtensa-cross image
tests/tcg/mips: fix hello-mips compilation
tests/tcg: add gdb runner variant
tests/tcg: split run-test into user and system variants
tests/tcg: add QEMU_OPT option for test runner
tests/tcg: enable tcg tests for softmmu
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for VHOST_USER_GET_INFLIGHT_FD and
VHOST_USER_SET_INFLIGHT_FD message to set/get shared buffer
to/from qemu. Then backend can track inflight I/O in this buffer.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Best to be explicit about where to find things.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In an out-of-tree build gcovr can get quite confused about what is
going on otherwise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
If we're doing an out-of-tree build of Sphinx, then we
copy some extra spurious files to the install directory
as part of 'make install':
qemu-ga-qapi.texi
qemu-ga-ref.7
qemu-ga-ref.7.pod
qemu-ga-ref.html
qemu-ga-ref.txt
qemu-qmp-qapi.texi
qemu-qmp-ref.7
qemu-qmp-ref.7.pod
qemu-qmp-ref.html
qemu-qmp-ref.txt
because these have been built into build/docs/interop along
with the Sphinx interop documents. Filter them out of the
set of files we install when we're installing the Sphinx-built
manual files. (They are installed into their correct locations
as part of the main install-doc target already.)
Fixes: 5f71eac06e ("Makefile, configure: Support building rST documentation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-4-peter.maydell@linaro.org
We forgot the '-r' option on the rm command to clean up the
Sphinx .doctrees working directory, which meant that
"make distclean" fails:
rm: cannot remove '.doctrees': Is a directory
Add the missing option.
Fixes: 5f71eac06e ("Makefile, configure: Support building rST documentation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-3-peter.maydell@linaro.org
The Sphinx build-sphinx tool does not permit building a manual
into the same directory as its source files. This meant that
commit 5f71eac06e broke QEMU in-source-tree
builds, which would fail with:
Error: source directory and destination directory are same.
Fix this by making in-tree builds build the Sphinx manuals
into a subdirectory of docs/.
Fixes: 5f71eac06e ("Makefile, configure: Support building rST documentation")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-2-peter.maydell@linaro.org
Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and "default" statements. The RHS is replaced
respectively by "true", "false" or a random value.
However, allyesconfig and randconfig do not quite work, because all the
files for hw/ARCH/Kconfig are sourced and therefore you could end up
enabling some ARM boards in x86 or things like that. This is left for
future work, but I am leaving it in to help debugging minikconf itself.
allnoconfig mode is tied to a new configure option, --without-default-devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.
The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't hard-code the QEMU version number into conf.py. Instead
we either pass it to sphinx-build on the command line, or
(if doing a standalone Sphinx run in a readthedocs.org setup)
extract it from the VERSION file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-12-peter.maydell@linaro.org
Message-id: 20190228145624.24885-12-peter.maydell@linaro.org
Abstract out the "identify the pkgversion" code from the
rule for creating qemu-version.h, so it sets makefile
variables for QEMU_PKGVERSION and QEMU_FULL_VERSION.
(We will want to use these when building the Sphinx docs.)
NB: As we abstract this out, we use -e to check for .git
rather than -d, since in some situations .git may be a file
rather than a directory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-11-peter.maydell@linaro.org
Message-id: 20190228145624.24885-11-peter.maydell@linaro.org
Add support to our configure and makefile machinery for building
our rST docs into HTML files.
Building the documentation now requires that sphinx-build is
available; this seems better than allowing half the docs to
be built if it is not present but having half of them missing.
(In particular it means that assuming that distros configured with
--enable-docs they'll get a helpful error from configure telling
them the new build dependency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-10-peter.maydell@linaro.org
Message-id: 20190228145624.24885-10-peter.maydell@linaro.org
Use the "system" libslirp if its present or requested.
Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJccBqMAAoJECgfDbjSjVRpvSEIAKYPRNdCBX/SSS/L/tmJS5Zt
8IyU/HW1YJ249vO+aT6z4Q3QPgqNC3KjXC3brx/WRoPZnRroen4rv2Kqnk6SayPa
a52d2ubXKWxb3swdG1CAVzFRhq/ABpgAPx0dr1JW+RXgo2lxpJ4GNYxKMosQTaPE
hRNeXl1XlcIK525kJhFH3Hlij9mTRuY6T7ydpPQd8dUq2dBRaL9RrzZRrkZxCy6l
gQPUqNzPhG0XXyOiJmwYyVX0zGzbYrMLrMQAor2SBIYmU+zv2eZGPJUYxoMTUMzt
YR0WCpvkvPITlAryaBoozAIDYVz8PxBRT1KRwpDal+2rzlm6o+veKDiF8R46gn0=
=GzUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current qemu_acl module provides a simple access control list
facility inside QEMU, which is used via a set of monitor commands
acl_show, acl_policy, acl_add, acl_remove & acl_reset.
Note there is no ability to create ACLs - the network services (eg VNC
server) were expected to create ACLs that they want to check.
There is also no way to define ACLs on the command line, nor potentially
integrate with external authorization systems like polkit, pam, ldap
lookup, etc.
The QAuthZ object defines a minimal abstract QOM class that can be
subclassed for creating different authorization providers.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The roms/edk2 submodule can help with three goals:
- build the OVMF and ArmVirtQemu virtual UEFI firmware platforms (to be
implemented later),
- build the EfiRom tool on the fly, which is used in roms/Makefile, for
building the "efirom" target,
- build UEFI test applications (to be run in guests), for qtest support.
Edk2 commit 85588389222a3636baf0f9ed8227f2434af4c3f9 stands for the latest
"stable tag", namely "edk2-stable201811".
The edk2 repository tracks some binary files that should not be removed by
QEMU's top-level "make clean"; exempt the full pathnames from the "find"
command.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190204160325.4914-2-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Adding QAPI's .o to util-obj-y, common-obj-y and obj-y is spread over
three places: Makefile.objs takes care of target-independent generated
code, Makefile.target of target-dependent generated code, and
qapi/Makefile.objs of (target-independent) hand-written code.
Do everything in qapi/Makefile.objs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-8-armbru@redhat.com>
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now. It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore. Avoid that by generating it
into separate files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
After this patch contrib/elf2dmp can be built for Windows x86 and x86_64
hosts by mingw.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-7-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new pvh.bin option rom can be used with SeaBIOS to boot
uncompressed kernel using the x86/HVM direct boot ABI.
pvh.S contains the entry point of the option rom. It runs
in real mode, loads the e820 table querying the BIOS, and
then it switches to 32bit protected mode and jumps to the
pvh_load_kernel() written in pvh_main.c.
pvh_load_kernel() loads the cmdline and kernel entry_point
using fw_cfg, then it looks for RSDP, fills the
hvm_start_info required by x86/HVM ABI, and finally jumps
to the kernel entry_point.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Autogenerated code in trace.h/trace.c and friends is specific to the
config-host.mak TRACE_BACKENDS setting and must be regenerated when
./configure --enable-trace-backend= changes settings.
This patch ensures that changes to TRACE_BACKENDS are detected. For
example, the trace-root.h file is now updated after switching trace
backends:
$ ./configure && make
$ cp trace-root.h /tmp/old-trace-root.h
$ ./configure --enable-trace-backend=simple && make
$ diff -u /tmp/old-trace-root.h trace-root.h
Reported-by: Christophe Lyon <christophe.lyon@st.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190129025343.4788-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The dtrace systemtap trace backend for QEMU is very powerful but it is
also somewhat unfriendly to users who aren't familiar with systemtap,
or who don't need its power right now.
stap -e "....some strange script...."
The 'log' backend for QEMU by comparison is very crude but incredibly
easy to use:
$ qemu -d trace:qio* ...some args...
23266@1547735759.137292:qio_channel_socket_new Socket new ioc=0x563a8a39d400
23266@1547735759.137305:qio_task_new Task new task=0x563a891d0570 source=0x563a8a39d400 func=0x563a86f1e6c0 opaque=0x563a89078000
23266@1547735759.137326:qio_task_thread_start Task thread start task=0x563a891d0570 worker=0x563a86f1ce50 opaque=0x563a891d9d90
23273@1547735759.137491:qio_task_thread_run Task thread run task=0x563a891d0570
23273@1547735759.137503:qio_channel_socket_connect_sync Socket connect sync ioc=0x563a8a39d400 addr=0x563a891d9d90
23273@1547735759.138108:qio_channel_socket_connect_fail Socket connect fail ioc=0x563a8a39d400
This commit introduces a way to do simple printf style logging of probe
points using systemtap. In particular it creates another set of tapsets,
one per emulator:
/usr/share/systemtap/tapset/qemu-*-log.stp
These pre-define probe functions which simply call printf() on their
arguments. The printf() format string is taken from the normal
trace-events files, with a little munging to the format specifiers
to cope with systemtap's more restrictive syntax.
With this you can now do
$ stap -e 'probe qemu.system.x86_64.log.qio*{}'
22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0
We go one step further though and introduce a 'qemu-trace-stap' tool to
make this even easier
$ qemu-trace-stap run qemu-system-x86_64 'qio*'
22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0
This tool is clever in that it will automatically change the
SYSTEMTAP_TAPSET env variable to point to the directory containing the
right set of probes for the QEMU binary path you give it. This is useful
if you have QEMU installed in /usr but are trying to test and trace a
binary in /home/berrange/usr/qemu-git. In that case you'd do
$ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
And it'll make sure /home/berrange/usr/qemu-git/share/systemtap/tapset
is used for the trace session
The 'qemu-trace-stap' script takes a verbose arg so you can understand
what it is running
$ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
Compiling script 'probe qemu.system.x86_64.log.qio* {}'
Running script, <Ctrl>-c to quit
...trace output...
It can enable multiple probes at once
$ qemu-trace-stap run qemu-system-x86_64 'qio*' 'qcrypto*' 'buffer*'
By default it monitors all existing running processes and all future
launched proceses. This can be restricted to a specific PID using the
--pid arg
$ qemu-trace-stap run --pid 2532 qemu-system-x86_64 'qio*'
Finally if you can't remember what probes are valid it can tell you
$ qemu-trace-stap list qemu-system-x86_64
ahci_check_irq
ahci_cmd_done
ahci_dma_prepare_buf
ahci_dma_prepare_buf_fail
ahci_dma_rw_buf
ahci_irq_lower
...snip...
Or list just those matching a prefix pattern
$ qemu-trace-stap list -v qemu-system-x86_64 'qio*'
Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
Listing probes with name 'qemu.system.x86_64.log.qio*'
qio_channel_command_abort
qio_channel_command_new_pid
qio_channel_command_new_spawn
qio_channel_command_wait
qio_channel_file_new_fd
...snip...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The next commit will add an EXAMPLES section to qemu-nbd.8;
for that to work, we need to recognize EXAMPLES in texi2pod.
We also need to add a dependency from all man pages against
the generator script, since a change to the generator may
cause the resulting man page to differ.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190117193658.16413-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The icon associated with a GtkWindow is just a hint to window managers
and not all of them will honour it. Some will instead want to show the
icon listed by the .desktop file. The desktop file is located based on
the application ID, which is set using g_set_prgname. QEMU has not
historically provided a desktop file or set its app ID, so it got a
broken icon in GNOME shell, which is now fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU currently installs logos to $prefix/share/qemu/ which means no GUI
toolkit or applications can find them by default.
The accepted standards for desktop applications declare that application
logos / icons should be installed under $prefix/share/icons, so use this
directory location.
Pre-rendered icons are provided at the standard sizes expected for GUI
applications, along with the scalable SVG, to ensure maximum portability.
The PNGs are rendered from the SVG using inkscape, however, this is not
wired up into the default make rules to avoid requiring inkscape as a
mandatory tool in build systems / developer workstations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix Commit a5d2f6f877 (contrib/rdmacm-mux: Add implementation
of RDMA User MAD multiplexer).
The above commit introduces a new contrib target, adding a global dependency
to libumad library in case pvrdma configuration option is enabled.
Clang forbids it:
clang-6.0: error: -libumad: 'linker' input unused
[-Werror,-Wunused-command-line-argument]
Fix by limiting the scope to the rdmacm-mux target itself.
Reported-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190118124614.24548-4-marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
This will allow to have cflags for the whole slirp.mo -objs.
It makes it possible to build tests that links only with
slirp-obj-y (and not the whole common-obj).
It is also a step towards building slirp as a shared library, although
this requires a bit more thoughts to build with
net/slirp.o (CONFIG_SLIRP would need to be 'm') and other build issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Copy the content into the sl and sv files (the only ones left which are
not generated by qemu-keymap).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-4-kraxel@redhat.com
It doesn't define any keys, only includes "common".
Which makes it effectively an "en-us" map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-3-kraxel@redhat.com
"common" is the only file using it, so we can just include it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-2-kraxel@redhat.com
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a
given MAD class.
This does not go hand-by-hand with qemu pvrdma device's requirements
where each VM is MAD agent.
Fix it by adding implementation of RDMA MAD multiplexer service which on
one hand register as a sole MAD agent with the kernel module and on the
other hand gives service to more than one VM.
Design Overview:
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
----------------
A server process is registered to UMAD framework (for this to work the
rdma_cm kernel module needs to be unloaded) and creates a unix socket to
listen to incoming request from clients.
A client process (such as QEMU) connects to this unix socket and
registers with its own GID.
TX:
----
When client needs to send rdma_cm MAD message it construct it the same
way as without this multiplexer, i.e. creates a umad packet but this
time it writes its content to the socket instead of calling umad_send().
The server, upon receiving such a message fetch local_comm_id from it so
a context for this session can be maintain and relay the message to UMAD
layer by calling umad_send().
RX:
----
The server creates a worker thread to process incoming rdma_cm MAD
messages. When an incoming message arrived (umad_recv()) the server,
depending on the message type (attr_id) looks for target client by
either searching in gid->fd table or in local_comm_id->fd table. With
the extracted fd the server relays to incoming message to the client.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
configure gets the version number from VERSION, and writes it to
config-host.mak. The make dependency for that is missing. Because of
that, a rebuild after a VERSION change may not pick up the change.
Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181214084754.23854-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Adding a new qapi module had some rather tedious repetition to
wire it into Makefile, Makefile.objs, and .gitignore (for example,
see commit bf42508f and its followup b61acdec). For make, add some
indirection by taking advantage of GNU Make string processing to
expand a list of module names into all the required artifacts, so
that future additions of a new module need only touch the list of
module names. And for gitignore, use globs to cover all generated
file names.
The list has to live in Makefile.objs, due to the way that
our unnest-vars macro slirps in that file without remembering
any definition of $(QAPI_MODULES) from Makefile.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20181116200016.2080785-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Difficult to make use of if not installed
Fixes: cd1bfd5ef3 ("seabios: update bios and vgabios binaries")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 153936155938.28040.11513367417790075721.stgit@gimli.home
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to
Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be
opened in WinDbg.
This tool can help if VMCoreInfo device/driver is absent in Windows VM and
'dump-guest-memory -w' is not available but dump can be created in ELF format.
The tool works as follows:
1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE
to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU
state CR3 is not suitable.
2. Find an address within the kernel image by dereferencing the first
IDT entry and scans virtual memory upwards until the start of the
kernel.
3. Download a PDB matching the kernel from the Microsoft symbol store,
and figure out the layout of certain relevant structures necessary for
the dump.
4. Populate the corresponding structures in the memory image and create
the appropriate dump header.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
Make sure that the docs get correctly regenerated when the
file qemu-deprecated.texi has been changed.
Fixes: 44c67847e3
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f99ce85279178385f204a52236f855c879c29cdc)
If you don't want to compile everything, you configure
config-devices.mak. And then make clean remove it, and make will
create a default one without your configuration. Fix it by not
removing it on clean target. Remove it instead on distclean.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
Remove it instead on distclean.
With the recent set of CPU hardware vulnerabilities on x86, it is
increasingly difficult to understand which CPU configurations are
good to use and what flaws they might be vulnerable to.
This doc attempts to help management applications and administrators in
picking sensible CPU configuration on x86 hosts. It outlines which of
the named CPU models are good choices, and describes which extra CPU
flags should be enabled to allow the guest to mitigate hardware flaws.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180627160103.13634-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will build a coverage report under the current directory in
reports/coverage. At the users option a report can be generated by
directly invoking something like:
make foo/bar/coverage-report.html
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This can be used to remove any stale coverage data before any
particular test run. This is useful for analysing individual tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>---
This reverts commit 208ecb3e1a. This was
causing problems by making DEF_TARGET_LIST pointless and having to
jump through hoops to build on mingw with a dully enabled config.
This includes a change to fix the per-guest TCG test probe which was
added after 208ecb3 and used TARGET_LIST.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
This commit removes the PYTHON_UTF8 workaround. The problem with setting
LC_ALL= LANG=C LC_CTYPE=en_US.UTF-8
is that the en_US.UTF-8 locale might not be available. In this case
setting above locales results in build errors even though another UTF-8
locale was originally set [1]. The only stable way of fixing the
encoding problem is by specifying the encoding in Python, like the
previous commit does.
[1] https://bugs.gentoo.org/657766
Signed-off-by: Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
Signed-off-by: Matthias Maier <tamiko@43-1.org>
Message-Id: <20180618175958.29073-3-armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In appears the input keymap for osx was forgotten in the commit that
converted the gtk frontend to keycodemapdb. Add it.
Fixes: 2ec78706 ("ui: convert GTK and SDL1 frontends to keycodemapdb")
CC: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Message-id: 1528933916-40670-1-git-send-email-keno@juliacomputing.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 9578f8cc3e.
The patch snuck in by accident without having been posted to
qemu-devel. It's entirely redundant: existing target print-% already
serves the purpose.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180504054241.6833-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
-----BEGIN PGP SIGNATURE-----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=oWiH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging
Fixes in syscall numbers,
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
# gpg: Signature made Tue 12 Jun 2018 11:57:18 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
linux-user/sparc64: Add inotify_rm_watch and tee syscalls
linux-user/microblaze: Fix typo in accept4 syscall
linux-user/hppa: Fix typo in mknodat syscall
linux-user/alpha: Fix epoll syscalls
qemu-binfmt-conf.sh: ignore the OS/ABI field
linux-user: disable qemu-bridge-helper and socket_scm_helper build
linux-user: Use is_error() to avoid warnings and make the code clearer
linux-user: Export use is_error(), use it to avoid warnings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user targets don't need them, and if we ask to build statically
linked binaries, some static libraries they need are not available.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180605160958.5434-1-laurent@vivier.eu>
Python 2.7 (the minimum Python version we require) provides
collections.OrderedDict on the standard library, so we don't need
to carry our own implementation.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608175252.25110-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To be more accurate on its purpose and make code that looks for a certain
target out of this variable more readable.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This adds a separate schema file for all job-related definitions that
aren't tied to the block layer.
For a start, move the enums JobType, JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fixes 722cd74964
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180416093719.2543-1-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
SeaBIOS blob which is currently shipped with QEMU
doesn't need acpi-dsdt.aml nor is able to use it
and code that loaded it in QEMU was removed by
(commit 9fb7aaaf4c "pc: drop external DSDT loading")
in 2013.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Available when configure --enable-modules.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180306161728.20890-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add audio/ to common-obj-m variable.
Also run both audio and ui variables through unnest-vars.
This avoids sdl.mo (exists in both audio/ and ui/) name clashes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-4-kraxel@redhat.com
Now that gtk support builds as a module, CONFIG_GTK changed from
y to m. Adjust Makefile correspondingly.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-id: 20180307155517.32570-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
This is not a complete implementation yet with a lot of components
still missing but enough for the U-Boot firmware to start and to boot
a Linux kernel or AROS.
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We used to generate first test and later QGA QAPI code into
qapi-generated/. Commit b93b63f574 moved the test code to tests/.
Commit 54c2e50205 moved the QGA code to qga/qapi-generated/. The
directory has been unused since.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-30-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
