It is only used in MONITOR, where a direct call of gen_lea_v_seg
is simpler, and in XLAT. Inline it in the latter.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The is_store argument of gen_ldst_modrm has only ever been passed
a constant. Just split the function in two.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Values other than OR_TMP0 were only ever used by MOV and MOVNTI
opcodes. Now that these have been converted to the new decoder,
remove the argument.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make gen_eob take the DISAS_* constant as an argument, so that
it is not necessary to have wrappers around it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is an invariant now that there are no calls to gen_eob_inhibit_irq()
outside tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sti only has one exit, so it does not need to generate the
end-of-translation code inline. It can be deferred to tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
syscall and sysret only have one exit, so they do not need to
generate the end-of-translation code inline. It can be
deferred to tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place DISAS_* constants that update cpu_eip first, and
the "jump" ones last. Add comments explaining the differences
and usage.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark cc_op as clean and do not spill it at the end of the translation block.
Technically this is a tiny bit less efficient, but:
* it results in translations that are a tiny bit smaller
* for most of these instructions, it is not unlikely that they are close to
the end of the basic block, in which case cc_op would not be overwritten
* anyway the cost is probably dwarfed by that of computing flags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to set it again at the end of the translation block, cc_op_dirty
can be set to false.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already handled in gen_eob(). Before adding another DISAS_*
case, remove the double calls.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_helper_rsm cannot generate an exception, and reloads the flags.
So there's no need to spill cc_op and update cpu_eip, but on the
other hand cc_op must be reset to CC_OP_EFLAGS before returning.
It all works by chance, because by spilling cc_op before the call
to the helper, it becomes non-dirty and gen_eob will not overwrite
the CC_OP_EFLAGS value that is placed there by the helper. But
let's clean it up.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel SDM 18.3.1.4 "If an occurrence of the MOV or POP instruction
loads the SS register executes with EFLAGS.TF = 1, no single-step debug
exception occurs following the MOV or POP instruction."
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If EFLAGS.RF is 1, special processing in gen_eob_worker() is needed and
therefore goto_tb cannot be used.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The point of CPU_CFLAGS is really just to select the appropriate multilib,
for example for library linking tests, and -mcx16 is not needed for
that purpose.
Furthermore, if -mcx16 is part of QEMU's choice of a basic x86_64
instruction set, it should be applied to cross-compiled x86_64 code too;
it is plausible that tests/tcg would want to cover cmpxchg16b as well,
for example. In the end this makes just as much sense as a per sub-build
tweak, so move the flag to meson.build and cross_cc_cflags_x86_64.
This leaves out contrib/plugins, which would fail when attempting to use
__sync_val_compare_and_swap_16 (note it does not do yet); while minor,
this *is* a disadvantage of this change. But building contrib/plugins
with a Makefile instead of meson.build is something self-inflicted just
for the sake of showing that it can be done, and if this kind of papercut
started becoming a problem we could make the directory part of the meson
build. Until then, we can live with the limitation.
Signed-off-by: Artyom Kunakovsky <artyomkunakovsky@gmail.com>
Message-ID: <20240523051118.29367-1-artyomkunakovsky@gmail.com>
[rewrite commit message, remove from configure. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This replaces the previous PR for tags/pull-ppc-for-9.1-1-20240524
* Fix an interesting TLB invalidate race
* Implement more instructions with decodetree
* Add the POWER8/9/10 BHRB facility
* Add missing instructions, registers, SMT support
* First round of a big MMU xlate cleanup
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmZP1bsACgkQZ7MCdqhi
HK7TuQ/7BQugpF2yOYroQmo0Yl4RPfFp6ACqfYQgehcGegg3SWpEselTeOJla3G9
UyVd0mlWf7DciYi61qit/WyLOeuRXMtRjrnFLV2wz9o7D/Ey5/aLQfUL4oCDt/i2
hmmq3ZAcr7WWxaz338pLJx9gIVjaNiqSoRz9HgHNkQq0pxkbEo1eSjZ6QLSvqYC2
dwtJHywFrHNo14aq1Nc7PZ5MFxNN6t7hm7KRHKFrt8Obar15n64MSHyRvMzHI9EO
RgNzz9/qe5yvJ4kmaNiZjntxojXCBUhhlCTtaDIG1LDBc2yNG5VWQUnwThvyNxxX
h+Ia4Pv7blXikQ6RuqsvFyrLCgUvwXwBiQwiQCJyITk0asLyJVwhkUpiI/jJvOun
AujSA/6e2pbSe4RUZytkzygx2KVODrVtcSoOvo8kRw+2aTOWMv7DbfBalmWJQWgx
0xSeuUz22eNKEL2XbZWNM5v0OgXUXIs9BVeCqn7RB4lC2RNi72v111UPuKYq6Ijx
SHWQMGPGu9FNBsIdriclRWXVXHpVHz/s/l8AJT8ad6E57UHVk5zCPrbFZFImvQkL
E7xlctijeST8V5qGyBPG3M4aPoER9+6J32ORSx7KwDwr+fzkbNUXC8UUC4OjAZ+d
2vhie9Vs5xWq/E8gGovTymeQ4yHArobDz/j7+rrr0qeppnKLWjM=
=jHL7
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.1-1-20240524-1' of https://gitlab.com/npiggin/qemu into staging
*** NOTE ***
This replaces the previous PR for tags/pull-ppc-for-9.1-1-20240524
* Fix an interesting TLB invalidate race
* Implement more instructions with decodetree
* Add the POWER8/9/10 BHRB facility
* Add missing instructions, registers, SMT support
* First round of a big MMU xlate cleanup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmZP1bsACgkQZ7MCdqhi
# HK7TuQ/7BQugpF2yOYroQmo0Yl4RPfFp6ACqfYQgehcGegg3SWpEselTeOJla3G9
# UyVd0mlWf7DciYi61qit/WyLOeuRXMtRjrnFLV2wz9o7D/Ey5/aLQfUL4oCDt/i2
# hmmq3ZAcr7WWxaz338pLJx9gIVjaNiqSoRz9HgHNkQq0pxkbEo1eSjZ6QLSvqYC2
# dwtJHywFrHNo14aq1Nc7PZ5MFxNN6t7hm7KRHKFrt8Obar15n64MSHyRvMzHI9EO
# RgNzz9/qe5yvJ4kmaNiZjntxojXCBUhhlCTtaDIG1LDBc2yNG5VWQUnwThvyNxxX
# h+Ia4Pv7blXikQ6RuqsvFyrLCgUvwXwBiQwiQCJyITk0asLyJVwhkUpiI/jJvOun
# AujSA/6e2pbSe4RUZytkzygx2KVODrVtcSoOvo8kRw+2aTOWMv7DbfBalmWJQWgx
# 0xSeuUz22eNKEL2XbZWNM5v0OgXUXIs9BVeCqn7RB4lC2RNi72v111UPuKYq6Ijx
# SHWQMGPGu9FNBsIdriclRWXVXHpVHz/s/l8AJT8ad6E57UHVk5zCPrbFZFImvQkL
# E7xlctijeST8V5qGyBPG3M4aPoER9+6J32ORSx7KwDwr+fzkbNUXC8UUC4OjAZ+d
# 2vhie9Vs5xWq/E8gGovTymeQ4yHArobDz/j7+rrr0qeppnKLWjM=
# =jHL7
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 May 2024 04:48:11 PM PDT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.1-1-20240524-1' of https://gitlab.com/npiggin/qemu: (72 commits)
target/ppc: Remove pp_check() and reuse ppc_hash32_pp_prot()
target/ppc: Move out BookE and related MMU functions from mmu_common.c
target/ppc: Add a function to check for page protection bit
target/ppc/mmu-radix64.c: Drop a local variable
target/ppc/mmu-hash32.c: Drop a local variable
target/ppc: Split off common embedded TLB init
target/ppc: Remove id_tlbs flag from CPU env
target/ppc: Move mmu_ctx_t type to mmu_common.c
target/ppc: Transform ppc_jumbo_xlate() into ppc_6xx_xlate()
target/ppc: Split off 40x cases from ppc_jumbo_xlate()
target/ppc: Split off real mode handling from get_physical_address_wtlb()
target/ppc: Simplify ppc_booke_xlate() part 2
target/ppc: Simplify ppc_booke_xlate() part 1
target/ppc: Split off BookE handling from ppc_jumbo_xlate()
target/ppc: Remove BookE from direct store handling
target/ppc: Don't use mmu_ctx_t in mmubooke206_get_physical_address()
target/ppc: Don't use mmu_ctx_t in mmubooke_get_physical_address()
target/ppc: Don't use mmu_ctx_t for mmu40x_get_physical_address()
target/ppc: Replace hard coded constants in ppc_jumbo_xlate()
target/ppc: Deindent ppc_jumbo_xlate()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ppc_hash32_pp_prot() function in mmu-hash32.c is the same as
pp_check() in mmu_common.c, merge these to remove duplicated code.
Define the common function as static lnline otherwise exporting the
function from mmu-hash32.c would stop the compiler inlining it which
results in slightly lower performance.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
[np: move ppc_hash32_pp_prot inline without changing it]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add a new mmu-booke.c file for BookE and related MMU bits from
mmu_common.c.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Checking if a page protection bit is set for a given access type is a
common operation. Add a function to avoid repeating the same check at
multiple places. As this relies on access type and page protection bit
values having certain relation also add an assert to ensure that this
assumption holds.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The value is only used once so no need to introduce a local variable
for it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc_hash32_xlate() the value of need_prop is checked in two places
but precalculating it does not help because when we reach the first
check we always return and not reach the second place so the value
will only be used once. We can drop the local variable and calculate
it when needed, which makes these checks using it similar to other
places with such checks.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Several 4xx CPUs and e200 share the same TLB settings enclosed in an
ifdef. Split it off in a common function to reduce code duplication
and the number of ifdefs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This flag for split instruction/data TLBs is only set for 6xx soft TLB
MMU model and not used otherwise so no need to have a separate flag
for that.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Remove mmu_ctx_t definition from internal.h as this type is only used
within mmu_common.c.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Now that only 6xx cases left in ppc_jumbo_xlate() we can change it
to ppc_6xx_xlate() also removing get_physical_address_wtlb().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce ppc_40x_xlate() to split off 40x handlning leaving only 6xx
in ppc_jumbo_xlate() now.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add ppc_real_mode_xlate() to handle real mode translation and allow
removing this case from ppc_jumbo_xlate().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Merge the code fetch and data access cases in a common switch.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move setting error_code that appears in every case out in front and
hoist the common fall through case for BOOKE206 as well which allows
removing the nested switches.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce ppc_booke_xlate() to handle BookE and BookE 2.06 cases to
reduce ppc_jumbo_xlate() further.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As BookE never returns -4 we can drop BookE from the direct store case
in ppc_jumbo_xlate().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmubooke206_get_physical_address() only uses the raddr and prot fields
from mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmubooke_get_physical_address() only uses the raddr and prot fields
from mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmu40x_get_physical_address() only uses the raddr and prot fields from
mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The "2" in booke206_update_mas_tlb_miss() call corresponds to
MMU_INST_FETCH which is the value of access_type in this branch;
mmubooke206_esr() only checks for MMU_DATA_STORE and it's called from
code access so using MMU_DATA_LOAD here seems wrong so replace it with
access_type here as well that yields the same result. This also makes
these calls the same as the data access branch further down.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of putting a large block of code in an if, invert the
condition and return early to be able to deindent the code block.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fix several qemu_log_mask() calls that are misindented.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function just does two assignments and and unnecessary check that
is always true so inline it in the only caller left and remove it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The real mode handling is identical in the remaining switch cases.
Split off these common real mode cases into a separate conditional to
leave only the else branches in the switch that are different.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
BookE does not have real mode so split off and handle it first in
get_physical_address_wtlb() before checking for real mode for other
MMU models.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return directly, which is simpler than dragging a return value through
multpile if and else blocks.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the debug logging within ppc6xx_tlb_check() from after its only
call to simplify the caller.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() we have a large if block with a two
line else branch that effectively returns. Invert the condition and
move the else there to allow deindenting the large if block to make
the flow easier to follow.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Repurpose get_segment_6xx_tlb() to do the whole address translation
for POWERPC_MMU_SOFT_6xx MMU model by moving the BAT check there and
renaming it to match other similar functions. These are only called
once together so no need to keep these separate functions and
combining them simplifies the caller allowing further restructuring.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Drop MPC8xx cases from get_physical_address_wtlb() and ppc_jumbo_xlate().
The default case would still catch this and abort the same way and
there is still a warning about it in ppc_tlb_invalidate_all() which is
called in ppc_cpu_reset_hold() so likely we never get here but to make
sure add a case to ppc_xlate() to the same effect.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In get_physical_address_wtlb() the real_mode flag depends on either
the MSR[IR] or MSR[DR] bit depending on access_type. Extract just the
needed bit in a more straight forward way instead of doing unnecessary
computation.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmubooke_check_tlb() and mmubooke206_check_tlb() we can assign the
value of prot2 directly to the destination, no need to have a separate
local variable for it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmubooke_check_tlb() and mmubooke206_check_tlb() prot2 is
calculated first but only used after an unrelated check that can
return before tha value is used. Move the calculation after the check,
closer to where it is used, to keep them together and avoid computing
it when not needed.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The helper_rac function is defined but not used, remove it.
Fixes: 005b69fdcc (target/ppc: Remove PowerPC 601 CPUs)
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
I think it's use was removed by
Commit 5883d8b296 ("mmu-hash*: Don't use full ppc_hash{32,
64}_translate() path for get_phys_page_debug()")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
