# By Stefan Weil
# Via Alon Levy
* alon/libcacard_ccid.4:
libcacard: Fix compilation for older versions of glib (bug #1258168)
Message-id: 1386596263-26151-1-git-send-email-alevy@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Stefan Weil
# Via Michael Tokarev
* mjt/trivial-patches:
qxl: Add missing trace.h (fix broken build)
Message-id: 1386441094-9971-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We previously allocated 32-bits per temp for the next_free_temp entry.
We now allocate 4 bits per temp across the 4 bitmaps.
Using a linked list meant that if a translator is tweeked, resulting in
temps being freed in a different order, that would have follow-on effects
throughout the TB. Always allocating the lowest free temp means that
follow-on effects are minimized, which can make it easier to diff output
when debugging the translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Current implementation is not accurate according to ARMv7-AR reference
manual. See "B4.1.153 TTBCR, Translation Table Base Control Register,
VMSA | TTBCR format when using the Long-descriptor translation table
format". When LPAE feature is supported, EAE, bit[31] selects
translation descriptor format and, therefore, TTBCR format.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386657709-23399-1-git-send-email-s.fedorov@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Retain the existing gen_aa32_* inlines, to aid compilation for A64.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1386628626-21627-1-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the ARMv8 Advanced SIMD VMAXNM and VMINNM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Message-id: 1386158099-9239-7-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the ARMv8 floating point VMAXNM and VMINNM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-6-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add floatnn_minnum() and floatnn_maxnum() functions which are equivalent
to the minNum() and maxNum() functions from IEEE 754-2008. They are
similar to min() and max() but differ in the handling of QNaN arguments.
Signed-off-by: Will Newton <will.newton@linaro.org>
Message-id: 1386158099-9239-5-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The nan_exp argument is not used, so remove it.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-4-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the VSEL floating point selection instruction
which was added in ARMv8.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Floating point is an extension to the instruction set rather than
a coprocessor, so call it directly from the ARM and Thumb decode
functions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-2-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Return false from can_receive() when no valid buffer descriptor is
available. Ensures against mass packet droppage in some applications.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: cde00ef774e84e2586bf10fd37b542f75bf36cfb.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently this just floods indicating that can_receive has been called
by the net framework. Instead, save the result of the most recent
can_receive callback as state and only print a message if the result
changes (indicating some sort of actual state change in GEM). Make said
debug message more meaningful as well.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2eb74ca6a5756aea242d9f525961db95d6cfcf2c.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This write-1-clear logic was incorrect. It was always clearing w1c
bits regardless of whether the written value was 1 or not. i.e. it
was implementing a write-anything-to-clear strategy.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ed905b04d3343966ded425f06aa2224bc7a35b59.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The minimum packet size is 64, however this is before FCS stripping
occurs. So when FCS stripping the minimum packet size is 60. Fix.
Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 8aac5bd737f9cf48b87f32943d7eb5939061e546.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bytes_to_copy was being updated before its final use where it
advances the rx buffer pointer. This was causing total mayhem,
where packet data for any subsequent fragments was being fetched
from the wrong place.
Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: c2a1c65c1fd06eb274442a0fa4a6839d940e145e.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Specific address registers can be enabled or disabled by software.
QEMU was assuming they were always enabled. Implement the
disable/enable feature. SARs are disabled by writing to the lower half
register. They are re-enabled by then writing the upper half.
Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 49efd1f7450af8f980b967d3054245bae137866c.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bit 27 of the RX buffer desc word 1 should be set when the packet was
accepted due to specific address register match. Implement.
This feature is absent from the Xilinx documentation (UG585) but the
behaviour is tested as accurate on real hardware.
Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 7e3f26fc4ab244e8123efc12723e7164730abdcb.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The various Rx packet address matching mode flags were not being set in
the rx descriptor. Implement.
Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 6002a24a6a8ceaa11d3009ab5392840d1c084b28.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The real hardware prefetches rx buffer descriptors ASAP and
potentially throws relevant interrupts following the fetch
even in the absence of a received packet.
Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 41629e35edfdb1f02f1e401f2c3d0e2e4c9e44b3.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There was a replication of the rx descriptor address walking logic.
Reorder the flow control to remove. This refactoring also obsoletes
the local variables packet_desc_addr and last_desc_addr.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2a425b457ff0b57274bf206ad2236690cd7f5909.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were updating the ownership bit of all descriptors if packets
get split and written through several descriptors.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: d61b7847b51487118783c93765a485bc5c66d272.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cadence GEM has a MAC level loopback mode. Implement. Use the same basic
operation as the already implemented PHY loopback.
Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3a0baf1b6b2fc1be638bdf1a37408ec38988e970.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support -cpu host in virt machine (treating it like an A15, ie
with a GIC v2 and the A15's private peripherals.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-12-git-send-email-peter.maydell@linaro.org
Implement '-cpu host' for ARM when we're using KVM, broadly
in line with other KVM-supporting architectures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-11-git-send-email-peter.maydell@linaro.org
Instead of assuming that a KVM target CPU must always be a
Cortex-A15 and hardcoding this in kvm_arch_init_vcpu(),
store the KVM_ARM_TARGET_* value in the ARMCPU class,
and use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-10-git-send-email-peter.maydell@linaro.org
Add 'virt' platform support corresponding to arch/arm/mach-virt
in the Linux kernel tree. This has no platform-specific code but
can use any device whose kernel driver is is able to work purely
from a device tree node. We use this to instantiate a minimal
set of devices: a GIC and some virtio-mmio transports.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-8-git-send-email-peter.maydell@linaro.org
[PMM:
Significantly overhauled:
* renamed user-facing machine to just "virt"
* removed the A9 support (it can't work since the A9 has no
generic timers)
* added virtio-mmio transports instead of random set of 'soc' devices
(though we retain a pl011 UART)
* instead of updating io_base as we step through adding devices,
define a memory map with an array (similar to vexpress)
* similarly, define irqmap with an array
* folded in some minor fixes from John's aarch64-support patch
* rather than explicitly doing endian-swapping on FDT cells,
use fdt APIs that let us just pass in host-endian values
and let the fdt layer take care of the swapping
* miscellaneous minor code cleanups and style fixes
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New ARM boards are generally expected to boot their secondary CPUs
via the PSCI interface, rather than ad-hoc "loop around in holding
pen code" as hw/arm/boot.c implements. In particular this is
necessary for mach-virt kernels. For KVM we achieve this by creating
the VCPUs with a feature flag marking them as starting in PSCI
powered-down state; the guest kernel will then make a PSCI call
(implemented in the host kernel) to start the secondaries at
an address of its choosing once it has got the primary CPU up.
Implement this setting of the feature flag, controlled by a
qdev property for ARMCPU, which board code can set if it is a
PSCI system.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-7-git-send-email-peter.maydell@linaro.org
Linux requires device tree CPU nodes to include a 'compatible'
string describing the CPU. Add a field in the ARMCPU struct for
this so that boards which construct a device tree can insert
the correct CPU nodes.
Note that there is currently no officially specified 'compatible'
string for the TI925T, Cortex-M3 or SA1110 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-6-git-send-email-peter.maydell@linaro.org
Provide versions of the KVM PSCI constants to non-KVM code;
this will allow us to avoid an ifdef in boards which set up
a PSCI node in the device tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-5-git-send-email-peter.maydell@linaro.org
If no fdt is provided on command line and the new field
get_dtb in struct arm_boot_info is set then call it to
get a device tree blob.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-4-git-send-email-peter.maydell@linaro.org
[PMM: minor tweaks and cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device trees created with create_device_tree() may not have any
entries in their reservemap, because the FDT API requires that the
reservemap is completed before any FDT nodes are added, and
create_device_tree() itself creates a node. However we were not
calling fdt_finish_reservemap(), which meant that there was no
terminator in the reservemap list and whatever happened to be at the
start of the FDT data section would end up being interpreted as
reservemap entries. Avoid this by calling fdt_finish_reservemap()
to add the terminator.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1385140638-10444-3-git-send-email-peter.maydell@linaro.org
There are a number of places where it would be convenient for ARM
code to have working definitions of KVM constants even in code
which is compiled with CONFIG_KVM not set. In this situation we
can't simply include the kernel KVM headers (which might conflict
with host header definitions or not even compile on the compiler
we're using) so we have to redefine equivalent constants.
Provide a mechanism for doing this and checking that the values
match, and use it for the constants we're currently exposing
via an ad-hoc mechanism.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-2-git-send-email-peter.maydell@linaro.org
Add the global timer to A9 MPCore.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ff92f35f438ac671b57d99d823723dd3e62d2c49.1385969450.git.peter.crosthwaite@xilinx.com
[PC Changes:
* new commit message
* split off original version as a separate patch
* Rebased against new mpcore implementation (with struct embedding)
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.
Based on version contributed by Francois LEGAL.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
* New commit message
* Re-implemented as single timer model
* Fixed backwards counting issue in polled mode
* completed VMSD fields
* macroified magic numbers (and headerified reg definitions)
* split of as device-model-only patch
* use bitops for 64 bit register access
* Fixed auto increment mode to check condition properly
* general cleanup (names/style etc).
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
* minor typo fixes
* added missing return after error_setg()
* dropped setting dc->no_user = 1
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To make it consistent for easier code reading. The order in which
variables are defined and functions are called is set to match the
address map ordering.
The new consistent order of doing stuff is:
SCU -> GIC -> MPTimer -> WDT.
0 functional change.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8f31398e6d9a93f57291399f269039da1a77a2b5.1385969450.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename this variable for consistency with the above defined mptimerdev
variable.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 28939ef95589a62414634e86c47cef76b21b15f7.1385969450.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux kernel from version 3.4 requires CM_REFCNT register for sched timer
for Integrator/CP board (integrator_defconfig).
See http://infocenter.arm.com/help/topic/com.arm.doc.dui0138e/ch04s06s11.html
Signed-off-by: Jan Petrous <jan.petrous@tieto.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Forward-port the following commit from seabios:
commit 995bbeef78b338370f426bf8d0399038c3fa259c
Author: Paul Menzel <paulepanter@users.sourceforge.net>
Date: Thu Oct 3 11:30:52 2013 +0200
The ASL Optimizing Compiler version 20130823-32 [Sep 11 2013] issues the
following warning.
$ make
[…]
Compiling IASL out/src/fw/acpi-dsdt.hex
out/src/fw/acpi-dsdt.dsl.i 360: Method(IQCR, 1, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
[…]
ASL Input: out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19181 bytes, 316 keywords
AML Output: out/src/fw/acpi-dsdt.aml - 4407 bytes, 159 named objects, 157 executable opcodes
Listing File: out/src/fw/acpi-dsdt.lst - 143715 bytes
Hex Dump: out/src/fw/acpi-dsdt.hex - 41661 bytes
Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 246 Optimizations
[…]
After changing the parameter from `NotSerialized` to `Serialized`, the
remark is indeed gone and there is no size change.
The remark was added in ACPICA version 20130517 [1] and gives the
following explanation.
If a thread blocks within the method for any reason, and another thread
enters the method, the method will fail because an attempt will be
made to create the same (named) object twice.
In this case, issue a remark that the method should be marked
serialized. ACPICA BZ 909.
[1] ba84d0fc18
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reported-by: Marcel Apfelbaum <marcel.a@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IASL stores it's revision in each table header it generates.
That's not nice since guests will see a change each time they move
between hypervisors. We generally fill our own info for tables, but we
(and seabios) forgot to do this for the built-in DSDT.
Modifications in DSDT table:
OEM ID: "BXPC" -> "BOCHS "
OEM Table ID: "BXDSDT" -> "BXPCDSDT"
Compiler ID: "INTL" -> "BXPC"
Compiler Version: 0x20130823 -> 0x00000001
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Read all ACPI tables from guest - will be useful for further unit tests.
Follow pointers between ACPI tables checking signature and format for
correctness. Verify checksum for all tables.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, we get SeaBIOS defaults: manufacturer Bochs, product Bochs,
no version. Best SeaBIOS can do, but we can provide better defaults:
manufacturer QEMU, product & version taken from QEMUMachine desc and
name.
Take care to do this only for new machine types, of course.
Note: Michael Tsirkin doesn't trust us to keep values of QEMUMachine member
product stable in the future. Use copies instead, and in a way that
makes it obvious that they're guest ABI.
Note that we can be trusted to keep values of member name, because
that has always been ABI.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the single exception of ppc with 16M pages,
we get the same number of levels
with L2_PAGE_SIZE = 10 as with L2_PAGE_SIZE = 9.
by doing this we reduce memory footprint of a single level
in the node memory map by 2x without runtime overhead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As an alternative to commit 818f86b (exec: limit system memory
size, 2013-11-04) let's just make all address spaces 64-bit wide.
This eliminates problems with phys_page_find ignoring bits above
TARGET_PHYS_ADDR_SPACE_BITS and address_space_translate_internal
consequently messing up the computations.
In Luiz's reported crash, at startup gdb attempts to read from address
0xffffffffffffffe6 to 0xffffffffffffffff inclusive. The region it gets
is the newly introduced master abort region, which is as big as the PCI
address space (see pci_bus_init). Due to a typo that's only 2^63-1,
not 2^64. But we get it anyway because phys_page_find ignores the upper
bits of the physical address. In address_space_translate_internal then
diff = int128_sub(section->mr->size, int128_make64(addr));
*plen = int128_get64(int128_min(diff, int128_make64(*plen)));
diff becomes negative, and int128_get64 booms.
The size of the PCI address space region should be fixed anyway.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment, memory radix tree is already variable width, but it can
only skip the low bits of address.
This is efficient if we have huge memory regions but inefficient if we
are only using a tiny portion of the address space.
After we have built up the map, detect
configurations where a single L2 entry is valid.
We then speed up the lookup by skipping one or more levels.
In case any levels were skipped, we might end up in a valid section
instead of erroring out. We handle this by checking that
the address is in range of the resulting section.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend skip to 6 bit. As page entry doesn't fit in 16 bit
any longer anyway, extend it to 32 bit.
This doubles node map memory requirements, but follow-up
patches will save this memory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In preparation for dynamic radix tree depth support, rename is_leaf
field to skip, telling us how many bits to skip to next level.
Set to 0 for leaf.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
