Commit Graph

21 Commits

Author SHA1 Message Date
Isaku Yamahata
1b4e8f732d msix: remove duplicated defines.
remove defines which are already defined in pci_regs.h

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31 16:33:52 +03:00
Isaku Yamahata
98a3cb024b msix: use range helper function.
use range helper function in msix_write_config().

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-23 16:35:00 +02:00
Michael S. Tsirkin
5b5cb08683 msix: function mask support
Function mask is a mandatory feature in MSIX
spec so not implementing it is a spec violation.
Implement.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-07 21:50:53 +02:00
Michael S. Tsirkin
2760952ba9 msix: macro rename for function mask support
rename ENABLE_OFFSET -> CONTROL_OFFSET, since
same byte includes function mask.
This is in preparation for function mask support.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-07 21:50:52 +02:00
Michael S. Tsirkin
98304c846d msix: clear pending bit of an unused vector
PCI spec states:
if a masked vector has its Pending bit set, and the associated
underlying interrupt events are somehow satisfied (usually by software
though the exact manner is function-specific), the function must clear
the Pending bit, to avoid sending a spurious interrupt message later
when software unmasks the vector.

In our case this happens if vector becomes unused.
Clear pending bit in this case.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01 18:00:14 +02:00
Michael S. Tsirkin
1f944c661a msix: fix reset value for enable bit
On reset, we currently clear all bits in msix control register *except*
enable bit.  This is wrong: the spec says we should clear writeable
bits: function mask and enable bit.
Correct this.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01 18:00:00 +02:00
Michael S. Tsirkin
ae1be0bbc1 msix: fix mask bit state after reset
PCI spec states that mask bit must be 1 after reset.
Make it so.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01 17:59:54 +02:00
Michael S. Tsirkin
b5f28bcaee msix: add helper to unuse all msix entries
will be used by virtio on soft reset

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01 17:58:27 +02:00
Isaku Yamahata
6e355d901b pci: introduce pcibus_t to represent pci bus address/size instead of uint32_t
This patch is preliminary for 64 bit BAR support.
Introduce dedicated type, pcibus_t, to represent pci bus address/size
instead of uint32_t.
Later this type will be changed to uint64_t.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:08 -06:00
Michael S. Tsirkin
76f5159d7f qemu/msix: fix table access issues
Fixes a couple of issues with msix table access:
- With misbehaving guests, misaligned 4 byte access could overflow
  msix table and cause qemu to segfault. Since PCI spec requires
  host to only issue dword-aligned accesses, as a fix,
  it's enough to mask the address low bits.
- Tables use pci format, not native format, and so
  we must use pci_[sg]et_long on read/write.

Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30 08:39:34 -05:00
Michael S. Tsirkin
5a1fc5e852 qemu: clean up target page usage in msix
Since cpu_register_phys_memory does not require size to be a multiple of
target page size, simply make msix page size 0x1000.  Do this in msix,
reverting part of 5e520a7d50, as we no
longer have to pass target page around.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:52 -05:00
Anthony Liguori
c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc
99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Blue Swirl
5e520a7d50 Compile msix only once
Get page size in device init.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 15:35:55 +00:00
Blue Swirl
d60efc6b0d Make CPURead/WriteFunc structure 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-25 18:29:31 +00:00
Michael S. Tsirkin
3174ecd128 qemu: msix nit: clear msix_entries_nr on error
I don't think it's critical to do this, but it's
best to keep uninit and error recovery consistent.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27 14:09:14 -05:00
Michael S. Tsirkin
72755a7096 qemu/msi: missing braces
MSIX present bit is tested incorrectly, and only happens to work because
the bit we are testing is 0x1.  Add braces to fix this.

Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10 13:44:30 -05:00
Michael S. Tsirkin
4bfd1712d7 qemu/msi: clean used vectors state on load
Clean up msix vector usage state on load. Since guest might have control
over it through the device, the device will have to load this state from
file.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10 13:44:30 -05:00
Michael S. Tsirkin
9a3e12c8a4 fix segfault in msix_save
This fixes segfault reported by Kevin Wolf,
and simplifies the code in msix_save.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09 16:58:08 -05:00
Blue Swirl
98846d73cb Fix Sparse warning
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-05 08:11:39 +00:00
Michael S. Tsirkin
02eb84d0ec qemu/pci: MSI-X support functions
Add functions implementing MSI-X support. First user will be virtio-pci.
Note that platform must set a flag to declare MSI supported: this
is a safety measure to avoid breaking platforms which should support
MSI-X but currently lack this in the interrupt controller emulation.
For PC this will be set by APIC.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24 09:09:14 -05:00