Some CPUs are of an opposite data-endianness to other components in the
system. Sometimes elfs have the data sections layed out with this CPU
data-endianness accounting for when loaded via the CPU, so byte swaps
(relative to other system components) will occur.
The leading example, is ARM's BE32 mode, which is is basically LE with
address manipulation on half-word and byte accesses to access the
hw/byte reversed address. This means that word data is invariant
across LE and BE32. This also means that instructions are still LE.
The expectation is that the elf will be loaded via the CPU in this
endianness scheme, which means the data in the elf is reversed at
compile time.
As QEMU loads via the system memory directly, rather than the CPU, we
need a mechanism to reverse elf data endianness to implement this
possibility.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the user passes us an EL3 boot rom, then it is going to want to
implement the PSCI interface itself. In this case, disable QEMU's
internal PSCI implementation so it does not get in the way, and
instead start all CPUs in an SMP configuration at once (the boot
rom will catch them all and pen up the secondaries until needed).
The boot rom code is also responsible for editing the device tree
to include any necessary information about its own PSCI implementation
before eventually passing it to a NonSecure guest.
(This "start all CPUs at once" approach is what both ARM Trusted
Firmware and UEFI expect, since it is what the ARM Foundation Model
does; the other approach would be to provide some emulated hardware
for "start the secondaries" but this is simplest.)
This is a compatibility break, but I don't believe that anybody
was using a secure boot ROM with an SMP configuration. Such a setup
would be somewhat broken since there was nothing preventing nonsecure
guest code from calling the QEMU PSCI function to start up a secondary
core in a way that completely bypassed the secure world.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1456853976-7592-1-git-send-email-peter.maydell@linaro.org
If the virt board is started with the 'secure' property set to
request a Secure setup, then make the first flash device be
visible only to the Secure world.
This is a breaking change, but I don't expect it to be noticed
by anybody, because running TZ-aware guests isn't common and
those guests are generally going to be booting from the flash
and implicitly expecting their Non-secure guests to not touch it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455288361-30117-5-git-send-email-peter.maydell@linaro.org
If we're loading a BIOS image into the first flash device,
load it into the flash's memory region specifically, not
into the physical address where the flash resides. This will
make a difference when the flash might be in the Secure
address space rather than the Nonsecure one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455288361-30117-4-git-send-email-peter.maydell@linaro.org
If we're booting in Secure mode, provide a secure-only RAM
(just 16MB) so that secure firmware has somewhere to run
from that won't be accessible to the Non-secure guest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455288361-30117-2-git-send-email-peter.maydell@linaro.org
The virt board restricts guests to only 30GB of RAM. This is a
hangover from the vexpress-a15 board, and there's no inherent reason
for it. 30GB is smaller than you might reasonably want to provision
a VM for on a beefy server machine. Raise the limit to 255GB.
We choose 255GB because the available space we currently have
below the 1TB boundary is up to the 512GB mark, but we don't
want to paint ourselves into a corner by assigning it all to
RAM. So we make half of it available for RAM, with the 256GB..512GB
range available for future non-RAM expansion purposes.
If we need to provide more RAM to VMs in the future then we need to:
* allocate a second bank of RAM starting at 2TB and working up
* fix the DT and ACPI table generation code in QEMU to correctly
report two split lumps of RAM to the guest
* fix KVM in the host kernel to allow guests with >40 bit address spaces
The last of these is obviously the trickiest, but it seems
reasonable to assume that anybody configuring a VM with a quarter
of a terabyte of RAM will be doing it on a host with more than a
terabyte of physical address space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1456402182-11651-1-git-send-email-peter.maydell@linaro.org
Recent changes to sdhci broke SD on raspi. This change mirrors
the logic to create the SD card device at the board level.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456351128-5560-1-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While guest/host ABI is documented in hw/acpi/bios-linker-loader.c,
the API was left undocumented.
This adds documentation for all API functions.
Additionally, input is validated to make sure all
pointers fall within range of provided files.
To allow this validation for checksum commands,
bios_linker_loader_add_checksum is changed to accept GArray * in place
of void *.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_fdt_setprop asserts in case of error hence no need to check
the returned value.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch allows the instantiation of the vfio-amd-xgbe device
from the QEMU command line (-device vfio-amd-xgbe,host="<device>").
The guest is exposed with a device tree node that combines the description
of both XGBE and PHY (representation supported from 4.2 onwards kernel):
Documentation/devicetree/bindings/net/amd-xgbe.txt.
There are 5 register regions, 6 interrupts including 4 optional
edge-sensitive per-channel interrupts.
Some property values are inherited from host device tree. Host device tree
must feature a combined XGBE/PHY representation (>= 4.2 host kernel).
2 clock nodes (dma and ptp) also are created. It is checked those clocks
are fixed on host side.
AMD XGBE node creation function has a dependency on vfio Linux header and
more generally node creation function for VFIO platform devices only make
sense with CONFIG_LINUX so let's protect this code with #ifdef CONFIG_LINUX.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Some passthrough'ed devices depend on clock nodes. Those need to be
generated in the guest device tree. This patch introduces some helpers
to build a clock node from information retrieved in the host device tree.
- copy_properties_from_host copies properties from a host device tree
node to a guest device tree node
- fdt_build_clock_node builds a guest clock node and checks the host
fellow clock is a fixed one.
fdt_build_clock_node will become static as soon as it gets used. A
dummy pre-declaration is needed for compilation of this patch.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch aligns the prototype with qemu_fdt_getprop. The caller
can choose whether the function self-asserts on error (passing
&error_fatal as Error ** argument, corresponding to the legacy behavior),
or behaves differently such as simply output a message.
In this later case the caller can use the new lenp parameter to interpret
the error if any.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the creation of the SD card device from the sdhci_sysbus
device itself into the boards that create these devices.
This allows us to remove the cannot_instantiate_with_device_add
notation because we no longer call drive_get_next in the device
model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1455646193-13238-7-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return a valid value from the BCM2835 property mailbox query "get board
revision". This query is used by U-Boot. Implementing it fixes the first
obvious difference between qemu and real HW.
The value returned is currently hard-coded to match the RPi2 I own. Other
values are legal, e.g. different board manufacturer field values are
likely to exist in the wild.
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454993910-24077-1-git-send-email-swarren@wwwdotorg.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
mach-virt doesn't yet support hotplug, but command lines specifying
-smp <num>,maxcpus=<bigger-num> don't fail. Of course specifying
bigger-num as something bigger than the machine supports, e.g. > 8
on a gicv2 machine, should fail though. This fix also makes mach-
virt's max-cpus check truly consistent with the one in vl.c:main,
as the one there was already correctly checking max-cpus instead
of smp-cpus.
Reported-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1454511578-24863-1-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Done with the Coccinelle semantic patch from commit 007b065, plus
manual clean up of dead variables.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1452783732-6581-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Included here:
Refactoring and bugfix patches in PC/ACPI.
New commands for ipmi.
Virtio optimizations.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWtj8KAAoJECgfDbjSjVRpBIQIAJSB9xwTcBLXwD0+8z5lqjKC
GTtuVbHU0+Y/eO8O3llN5l+SzaRtPHo18Ele20Oz7IQc0ompANY273K6TOlyILwB
rOhrub71uqpOKbGlxXJflroEAXb78xVK02lohSUvOzCDpwV+6CS4ZaSer7yDCYkA
MODZj7rrEuN0RmBWqxbs1R7Mj2CeQJzlgTUNTBGCLEstoZGFOJq8FjVdG5P1q8vI
fnI9mGJ1JsDnmcUZe/bTFfB4VreqeQ7UuGyNAMMGnvIbr0D1a+CoaMdV7/HZ+KyT
5TIs0siVdhZei60A/Cq2OtSVCbj5QdxPBLhZfwJCp6oU4lh2U5tSvva0mh7MwJ0=
=D/cA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc and misc cleanups and fixes, virtio optimizations
Included here:
Refactoring and bugfix patches in PC/ACPI.
New commands for ipmi.
Virtio optimizations.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sat 06 Feb 2016 18:44:26 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (45 commits)
net: set endianness on all backend devices
fix MSI injection on Xen
intel_iommu: large page support
dimm: Correct type of MemoryHotplugState->base
pc: set the OEM fields in the RSDT and the FADT from the SLIC
acpi: add function to extract oem_id and oem_table_id from the user's SLIC
acpi: expose oem_id and oem_table_id in build_rsdt()
acpi: take oem_id in build_header(), optionally
pc: Eliminate PcGuestInfo struct
pc: Move APIC and NUMA data from PcGuestInfo to PCMachineState
pc: Move PcGuestInfo.fw_cfg to PCMachineState
pc: Remove PcGuestInfo.isapc_ram_fw field
pc: Remove RAM size fields from PcGuestInfo
pc: Remove compat fields from PcGuestInfo
acpi: Don't save PcGuestInfo on AcpiBuildState
acpi: Remove guest_info parameters from functions
pc: Simplify xen_load_linux() signature
pc: Simplify pc_memory_init() signature
pc: Eliminate struct PcGuestInfoState
pc: Move PcGuestInfo declaration to top of file
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since build_rsdt() is implemented as common utility code (in
"hw/acpi/aml-build.c"), it should expose -- and forward -- the oem_id and
oem_table_id parameters between board code and the generic build_header()
function.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
This patch is the continuation of commit 8870ca0e94 ("acpi: support
specified oem table id for build_header"). It will allow us to control the
OEM ID field too in the SDT header.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> (maintainer:NVDIMM)
Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The new version is slightly different, to support Rasbperry Pi (in
particular, Pi1's arm11 core which doesn't support v7 instructions
such as MOVW).
Tested-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the SoC for Raspberry Pi 2.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This device maintains all the non-CPU peripherals on bcm2835 (Pi1)
which are also present on bcm2836 (Pi2). It also implements the
private address spaces used for DMA and mailboxes.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
in current impl. condition
build_madt() {
...
if (test_bit(i, cpuinfo->found_cpus))
is always true since loop handles only present CPUs
in range [0..smp_cpus).
But to fill usless cpuinfo->found_cpus we do unnecessary
scan over QOM tree to find the same CPUs.
So mark GICC as present always and drop not needed
code that fills cpuinfo->found_cpus.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1454323689-248759-1-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting Linux on AArch64 enabled cores, setup EL1 and
EL2 to use AArch64.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch is the ACPI equivalent of "hw/arm/virt: Add always-on
property to the virt board timer". The timer is always on, and
thus setting this informs Linux that it may switch off the periodic
timer. Switching off the periodic timer substantially reduces the
number of interrupts the host needs to inject.
Testing note: AArch64 guests (the only ones currently booting with
ACPI) do not actually need this patch to determine it can turn the
periodic timer off. I therefore used a hacked guest kernel to ensure
this patch works as the equivalent DT patch does.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1453380893-26174-1-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt board has an arch timer, which is always on. Emit the
"always-on" property to indicate to Linux that it can switch off the
periodic timer and reduces the amount of interrupts injected into a
guest.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1453204158-11412-1-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a secure memory region to the virt board, which is the
same as the nonsecure memory region except that it also has
a secure-only UART in it. This is only created if the
board is started with the '-machine secure=on' property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Wire up the system memory region to the CPUs explicitly
by setting the QOM property. This doesn't change anything
over letting it default, but will be needed for adding
a secure memory region later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Connect the sst25wf080 SPI flash to the EP108 board.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[PMM: free string when finished with it]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the Xilinx SPI devices to the ZynqMP model.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[ PC changes
* Use QOM alias for bus connectivity on SoC level
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[PMM: free the g_strdup_printf() string when finished with it]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ssi.h include file into the ssi directory.
While touching the code also fix the typdef lines as
checkpatch complains.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449505425-32022-4-git-send-email-peter.maydell@linaro.org
When booting the VM with UEFI, UEFI takes ownership of the RTC hardware.
While UEFI can use libfdt to disable the RTC device node in the DTB that
it passes to the OS, it cannot modify AML. Therefore, we won't generate
the RTC ACPI device at all when using UEFI.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1452867091-4023-1-git-send-email-shannon.zhao@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx ZynqMP SoC and EP108 board supports three memory regions:
- A 2GB region starting at 0
- A 32GB region starting at 32GB
- A 256GB region starting at 768GB
This patch adds support for the first two memory regions, which is
automatically created based on the size specified by the QEMU memory
command line argument.
On hardware the physical memory region is one continuous region, it is then
mapped into the three different regions by the DDRC. As we don't model the
DDRC this is done at startup by QEMU. The board creates the memory region and
then passes that memory region to the SoC. The SoC then maps the memory
regions.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: a1e47db941d65733724a300fcd98b74fbeeaaf22.1452637205.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Same Coccinelle semantic patch as in commit 565f65d.
We now use the original error whole instead of just its message
obtained with error_get_pretty(). This avoids suppressing its hint
(see commit 50b7b00), but I don't think the errors touched in this
commit can come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
virt_set_gic_version() calls exit(1) when passed an invalid property
value. Property setters are not supposed to do that. Screwed up in
commit b92ad39. Harmless, because the property belongs to a machine.
Set an error object instead.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Printing CPU registers is not helpful during machine initialization.
Moreover, these are straightforward configuration or "can get
resources" errors, so dumping core isn't appropriate either. Replace
hw_error() by error_report(); exit(1). Matches how we report these
errors in other machine initializations.
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1449764955-10741-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Done with this Coccinelle semantic patch:
@@
type T;
identifier FUN, RET;
expression list ARGS;
expression ERR, EC;
@@
(
- T RET = FUN(ARGS, &ERR);
+ T RET = FUN(ARGS, &error_fatal);
|
- RET = FUN(ARGS, &ERR);
+ RET = FUN(ARGS, &error_fatal);
|
- FUN(ARGS, &ERR);
+ FUN(ARGS, &error_fatal);
)
- if (ERR != NULL) {
- error_report_err(ERR);
- exit(EC);
- }
This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.
It leaves dead Error * variables behind, cleaned up manually.
Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Support the legacy -nic syntax for creating PCI network devices
as well as the new-style -device options. This makes life easier
for people moving from x86 KVM virtualization to ARM KVM virtualization
and expecting their network configuration options to work the same
way for both setups.
We use "virtio" as the default NIC model if the user doesn't specify one.
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Message-id: 1452091659-17698-1-git-send-email-ashoks@broadcom.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expanded and clarified commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Let build_header() support specified OEM table id so that we can build
multiple SSDT later
If the oem table id is not specified (aka, NULL), we use the default id
instead as the previous behavior
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With this CCM, i.MX25 timer is accurate with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.
IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.
For now the i.MX25 continues to use the i.MX31 CCM implementation.
An i.MX25 specific CCM will be introduced in a later patch.
We also rework initialization to stop using deprecated sysbus device init.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a gpio-keys node. This is used for Poweroff for the systems which
use DT not ACPI.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-11-git-send-email-zhaoshenglong@huawei.com
[PMM: use "standard-headers/linux/input.h" rather than <linux/input.h>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
