This reverts commit 518c7fb44f. It breaks
new Linux guests with SMP, because IPIs get mapped to large vectors which
our MPIC emulation does not implement.
Conflicts:
hw/ppc/e500.c
Currently for powerpc, kvm_arch_handle_exit() always returns 1, meaning
that its caller - kvm_cpu_exec() - will always exit immediately afterwards
to the loop in qemu_kvm_cpu_thread_fn().
There's no need to do this. Once we've handled the hypercall there's no
reason we can't go straight around and KVM_RUN again, which is what ret = 0
will signal. The only exception might be for hypercalls which affect the
state of cpu_can_run(), however the only one that might do this is H_CEDE
and for kvm that is always handled in the kernel, not qemu.
Furtherm setting ret = 0 means that when exit_requested is set from a
hypercall, we will enter KVM_RUN once more with a signal which lets the
the kernel do its internal logic to complete the hypercall with out
actually executing any more guest code. This is important if our hypercall
also triggered a reset, which previously would re-initialize everything
without completing the hypercall. This caused the kernel to get confused
because it thought the guest was still in the middle of a hypercall when
it has actually been reset.
This patch therefore changes to ret = 0, which is both a bugfix and a small
optimization.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This gives the kernel a paravirtualized machine to target, without
requiring both sides to pretend to be targeting a specific board
that likely has little to do with the host in KVM scenarios. This
avoids the need to add new boards to QEMU, just to be able to
run KVM on new CPUs.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the only mpc8544ds-ism that is factored out is
toplevel compatible and model. In the future the generic e500
code is expected to become more generic.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
No functional changes -- machine is still outwardly mpc8544ds.
The references that are not changed contain mpc8544 hardware details that
need to be parameterized if/when a different e500 platform wants to
change them.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Rename the file (with no changes other than fixing up the header paths)
in preparation for refactoring into a generic e500 platform. Also move
it into the newly created ppc/ directory.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
spapr_populate_pci_devices() populates the device tree only with bus
properties and has nothing to do with the devices on it as PCI BAR
allocation is done by the system firmware (SLOF).
New name - spapr_populate_pci_dt() - describes the functionality better.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PCIHostState struct already contains SysBusDevice so
the one in sPAPRPHBState has to go.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
* origin/master:
linux-user: ARM: Ignore immediate value for svc in thumb mode
linux-user: Use init_guest_space when -R and -B are specified
linux-user: Factor out guest space probing into a function
flatload: fix bss clearing
linux-user: make host_to_target_cmsg support SO_TIMESTAMP cmsg_type
linux-user: make do_setsockopt support SOL_RAW ICMP_FILTER socket option
linux-user: pass sockaddr from host to target
x86: switch to AREG0 free mode
x86: avoid AREG0 in segmentation helpers
x86: avoid AREG0 for misc helpers
x86: use wrappers for memory access helpers
x86: avoid AREG0 for SMM helpers
x86: avoid AREG0 for SVM helpers
x86: avoid AREG0 for integer helpers
x86: avoid AREG0 for condition code helpers
x86: avoid AREG0 for FPU helpers
linux-user: Move target_to_host_errno_table[] setup out of ioctl loop
linux-user: Fix SNDCTL_DSP_MAP{IN, OUT}BUF ioctl definitions
linux-user: Fix incorrect TARGET_BLKBSZGET, TARGET_BLKBSZSET
* 'linux-user.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
linux-user: ARM: Ignore immediate value for svc in thumb mode
linux-user: Use init_guest_space when -R and -B are specified
linux-user: Factor out guest space probing into a function
flatload: fix bss clearing
linux-user: make host_to_target_cmsg support SO_TIMESTAMP cmsg_type
linux-user: make do_setsockopt support SOL_RAW ICMP_FILTER socket option
linux-user: pass sockaddr from host to target
linux-user: Move target_to_host_errno_table[] setup out of ioctl loop
linux-user: Fix SNDCTL_DSP_MAP{IN, OUT}BUF ioctl definitions
linux-user: Fix incorrect TARGET_BLKBSZGET, TARGET_BLKBSZSET
When running in thumb mode, Linux doesn't evaluate the immediate value
of the svc instruction, but instead just always assumes the syscall number
to be in r7.
This fixes executing go_bootstrap while building go for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Roll the code used to initialize the guest memory space when -R
or -B is used into 'init_guest_space' and then call 'init_guest_space'
from the driver. This way the reserved guest memory space can
be probed for. Calling 'mmap' just once as is currently done is not
guaranteed to succeed since the host address space validation might fail.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
[PMM: Fixed minor whitespace errors.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current bss clear logic assumes the target mmap address and host
address are the same. Use g2h to translate from the target address
space to the host so we can call memset on it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Rename remains of op_helper.c to seg_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make FPU helpers take a parameter for CPUState instead
of relying on global env.
Introduce temporary wrappers for FPU load and store ops. Remove
wrappers for non-AREG0 code. Don't call unconverted helpers
directly.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* qmp/queue/qmp: (48 commits)
target-ppc: add implementation of query-cpu-definitions (v2)
target-i386: add implementation of query-cpu-definitions (v2)
qapi: add query-cpu-definitions command (v2)
compiler: add macro for GCC weak symbols
qapi: add query-machines command
qapi: mark QOM commands stable
qmp: introduce device-list-properties command
qmp: add SUSPEND_DISK event
qmp: qmp-events.txt: add missing doc for the SUSPEND event
qmp: qmp-events.txt: put events in alphabetical order
qmp: emit the WAKEUP event when the guest is put to run
qmp: don't emit the RESET event on wakeup from S3
scripts: qapi-commands.py: qmp-commands.h: include qdict.h
docs: writing-qmp-commands.txt: update error section
error, qerror: drop QDict member
qerror: drop qerror_table and qerror_format()
error, qerror: pass desc string to error calls
error: drop error_get_qobject()/error_set_qobject()
qemu-ga: switch to the new error format on the wire
qmp: switch to the new error format on the wire
...
* pmaydell/arm-devs.next:
arm: Move some ARM devices into libhw
ssd0323: abort() instead of exit(1) on error.
hw/sd.c: make sd_wp_addr() return bool
hw/sd.c: make sd_dataready() return bool
hw/sd.c: convert binary variables to bool
hw/sd.c: introduce wrapper for conversion address to wp group
hw/sd.c: make sd_wp_addr() accept 64 bit address argument
hw/sd.c: convert wp_groups in SDState to bitfield
armv7m: Guard against no -kernel argument
hw/armv7m_nvic: Fix incorrect default for num-irqs property
This command attempts to map to the behavior of -cpu ?. Unfortunately, the
output of this command differs wildly across targets.
To accommodate this, we use a weak symbol to implement a default version of the
command that fails with a QERR_NOT_SUPPORTED error code. Targets can then
override and implement this command if it makes sense for them.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This lets us provide a default implementation of a symbol which targets can
override.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This provides the same output as -M ? but in a structured way.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We've had a cycle to tweak. It is time to commit to supporting them.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This can be used in conjunction with qom-list-types to determine the supported
set of devices and their parameters.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Emitted when the guest makes a request to enter S4 state.
There are three possible ways of having this event, as described here:
http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html
I've decided to add a new event and make it indepedent of SHUTDOWN.
This means that the SHUTDOWN event will eventually follow the
SUSPEND_DISK event.
I've choosen this way because of two reasons:
1. Having an indepedent event makes it possible to query for its
existence by using query-events
2. In the future, we may allow the user to change what QEMU should
do as a result of the guest entering S4. So it's a good idea to
keep both events separated
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Today, the WAKEUP event is emitted when a wakeup _request_ is made.
This could be the system_wakeup command, for example.
A better semantic would be to emit the event when the guest is
already running, as that's what matters in the end. This commit does
that change.
In theory, this could break compatibility. In practice, it shouldn't
happen though, as clients shouldn't rely on timing characteristics of
the events. That is, a client relying that the guest is not running
when the event arrives may break if the event arrives after the guest
is already running.
This commit also adds the missing documentation for the WAKEUP event.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU is basically using reset logic when waking up from S3. This
causes the QMP RESET event to be emitted, which is wrong. Also,
the runstate checks done in reset are not necessary for S3 wakeup.
Fix this by untangling wakeup from reset logic and passing
VMRESET_SILENT to qemu_system_reset() to avoid emitting the RESET
event.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
qmp-commands.h declares several functions that have arguments of
type QDict. However, qdict.h is not included. This will cause a
build breakage when a file includes qmp-commands.h but doesn't
include qdict.h.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add information about the new error format and improve the text a bit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Used to store error information, but it's unused now.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This commit changes all QERR_ macros to contain a human message (ie.
the desc string found in qerr_table[]) instead of a json dictionary
in string format.
Before this commit, error_set() and qerror_report() would receive
a json dictionary in string format and build a qobject from it. Now,
both function receive a human message instead and the qobject is
not built anymore.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
error_get_qobject() is unused since last commit, error_set_qobject()
has never been used. Also drops error_int.h.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
IMPORTANT: this BREAKS qemu-ga compatibility for the error response.
Instead of returning something like:
{ "error": { "class": "InvalidParameterValue",
"data": {"name": "mode", "expected": "halt|powerdown|reboot" } } }
qemu-ga now returns:
{ "error": { "class": "GenericError",
"desc": "Parameter 'mode' expects halt|powerdown|reboot" } }
Notice that this is also a bug fix, as qemu-ga wasn't returning the
human message.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
